Initial commit

target/linux/qoriq/Makefile

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2021 Stijn Tintel <stijn@linux-ipv6.be>
+
+include $(TOPDIR)/rules.mk
+
+ARCH:=powerpc64
+BOARD:=qoriq
+BOARDNAME:=NXP QorIQ (PowerPC)
+CPU_TYPE:=e5500
+FEATURES:=boot-part ext4 fpu legacy-sdcard powerpc64 ramdisk rootfs-part rtc squashfs
+SUBTARGETS:=generic
+
+KERNEL_PATCHVER:=6.6
+
+KERNELNAME:=zImage
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += e2fsprogs mkf2fs uboot-envtools
+
+$(eval $(call BuildTarget))

target/linux/qoriq/base-files/etc/board.d/02_network

@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board_config_update
+board=$(board_name)
+
+wg_set_opt_interface() {
+	local device="$1"
+	local offset="$2"
+
+	ucidef_set_interface "$device" device "$device" protocol static ipaddr "10.0.${offset}.1" netmask 255.255.255.0
+}
+
+case "$board" in
+watchguard,firebox-m300)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	wg_set_opt_interface "eth2" "2"
+
+	for sweth in $(find /sys/class/net/ -name 'sweth*' -print); do
+		device="$(basename "$sweth")"
+		wg_set_opt_interface "$device" "${device#sweth}"
+	done
+
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/qoriq/base-files/etc/board.d/05_compat-version

@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	watchguard,firebox-m300)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/qoriq/base-files/lib/preinit/79_move_config

@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions.sh
+. /lib/upgrade/common.sh
+
+move_config() {
+	local partdev
+
+	if export_bootdevice && export_partdevice partdev 1; then
+		mkdir -p /boot
+		mount -o rw,noatime "/dev/$partdev" /boot
+		[ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
+		umount /boot
+	fi
+}
+
+boot_hook_add preinit_mount_root move_config

target/linux/qoriq/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	case "$(board_name)" in
+	watchguard,firebox-m300)
+		legacy_sdcard_check_image "$1"
+		;;
+	*)
+		return 0
+		;;
+	esac
+}
+
+platform_copy_config() {
+	case "$(board_name)" in
+	watchguard,firebox-m300)
+		legacy_sdcard_copy_config "$1"
+		;;
+	*)
+		return 0
+	esac
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	watchguard,firebox-m300)
+		legacy_sdcard_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}

target/linux/qoriq/config-6.6

@@ -0,0 +1,429 @@
+CONFIG_64BIT=y
+CONFIG_ALTIVEC=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_DEFAULT_COHERENT=y
+CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=32
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
+CONFIG_ASN1=y
+CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BOOKE=y
+CONFIG_BOOKE_OR_40x=y
+CONFIG_BOOKE_WDT=y
+CONFIG_BUFFER_HEAD=y
+CONFIG_CLK_QORIQ=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CLZ_TAB=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CORENET_GENERIC=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_TEO=y
+CONFIG_CPU_ISOLATION=y
+CONFIG_CPU_MITIGATIONS=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CRC32C_VPMSUM is not set
+CONFIG_CRYPTO_CURVE25519=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
+CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
+# CONFIG_CRYPTO_DEV_NX is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ENGINE=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_GF128MUL=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
+CONFIG_CRYPTO_LIB_SHA1=y
+CONFIG_CRYPTO_LIB_UTILS=y
+# CONFIG_CRYPTO_MD5_PPC is not set
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RSA=y
+# CONFIG_CRYPTO_SHA1_PPC is not set
+CONFIG_CRYPTO_XTS=y
+CONFIG_DATA_SHIFT=12
+CONFIG_DEBUG_INFO=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_OPS_BYPASS=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_E5500_CPU is not set
+CONFIG_E6500_CPU=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+# CONFIG_EDAC_CPC925 is not set
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_LEGACY_SYSFS=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EPAPR_PARAVIRT=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+CONFIG_EXT4_FS=y
+CONFIG_F2FS_FS=y
+CONFIG_FIXED_PHY=y
+# CONFIG_FSL_BMAN_TEST is not set
+CONFIG_FSL_CORENET_CF=y
+CONFIG_FSL_CORENET_RCPM=y
+CONFIG_FSL_DMA=y
+CONFIG_FSL_DPAA=y
+# CONFIG_FSL_DPAA_CHECKING is not set
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_GUTS=y
+CONFIG_FSL_IFC=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_MPIC_TIMER_WAKEUP=y
+CONFIG_FSL_PAMU=y
+CONFIG_FSL_PCI=y
+# CONFIG_FSL_QMAN_TEST is not set
+CONFIG_FSL_SOC=y
+CONFIG_FSL_SOC_BOOKE=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_FSL_XGMAC_MDIO=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FTL=y
+CONFIG_FUNCTION_ALIGNMENT=0
+CONFIG_FUNCTION_ERROR_INJECTION=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IOREMAP=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_GIANFAR is not set
+CONFIG_GLOB=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GRO_CELLS=y
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HWMON=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_MPC=y
+CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INTERRUPT_SANITIZE_REGISTERS=y
+# CONFIG_IOMMUFD is not set
+CONFIG_IOMMU_API=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
+# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISA_DMA_API=y
+CONFIG_JBD2=y
+CONFIG_JUMP_LABEL=y
+CONFIG_JUMP_LABEL_FEATURE_CHECKS=y
+# CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_MATH_EMULATION_FULL is not set
+CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEMORY=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMIOWB=y
+CONFIG_MMU_GATHER_MERGE_VMAS=y
+CONFIG_MMU_GATHER_PAGE_SIZE=y
+CONFIG_MMU_LAZY_TLB_REFCOUNT=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MPIC=y
+CONFIG_MPIC_MSGR=y
+CONFIG_MPIC_TIMER=y
+CONFIG_MPILIB=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_DSA_COMMON=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_OCELOT=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_EGRESS=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_INGRESS=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NET_XGRESS=y
+CONFIG_NLS=y
+CONFIG_NONSTATIC_KERNEL=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=24
+CONFIG_NR_IRQS=512
+CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGSUSPEND=y
+CONFIG_OPTPROBES=y
+CONFIG_PACKING=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xc000000000000000
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_ARCH_FALLBACKS=y
+CONFIG_PCS_LYNX=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_PHYLIB=y
+CONFIG_PHYLIB_LEDS=y
+CONFIG_PHYLINK=y
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYS_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PM=y
+# CONFIG_PMU_SYSFS is not set
+CONFIG_PM_CLK=y
+CONFIG_PPC=y
+CONFIG_PPC64=y
+CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2=y
+CONFIG_PPC64_ELF_ABI_V2=y
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_BARRIER_NOSPEC=y
+CONFIG_PPC_BOOK3E_64=y
+# CONFIG_PPC_BOOK3S_64 is not set
+CONFIG_PPC_DAWR=y
+CONFIG_PPC_DOORBELL=y
+CONFIG_PPC_E500=y
+CONFIG_PPC_E500MC=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+CONFIG_PPC_EPAPR_HV_PIC=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_FPU_REGS=y
+CONFIG_PPC_HAS_LBARX_LHARX=y
+CONFIG_PPC_INDIRECT_PCI=y
+# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
+CONFIG_PPC_KUAP=y
+# CONFIG_PPC_KUAP_DEBUG is not set
+CONFIG_PPC_KUEP=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MSI_BITMAP=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC_PAGE_SHIFT=12
+# CONFIG_PPC_QEMU_E500 is not set
+CONFIG_PPC_QUEUED_SPINLOCKS=y
+CONFIG_PPC_SMP_MUXED_IPI=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_PPC_WERROR=y
+CONFIG_PPS=y
+CONFIG_PREEMPT_NONE_BUILD=y
+CONFIG_PTE_64BIT=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PTP_1588_CLOCK_QORIQ=y
+CONFIG_QORIQ_CPUFREQ=y
+CONFIG_QORIQ_THERMAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+# CONFIG_RAVE_SP_CORE is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RELOCATABLE=y
+# CONFIG_RELOCATABLE_TEST is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+# CONFIG_SCOM_DEBUGFS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+CONFIG_SERIAL_FSL_LINFLEXUART=y
+CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMT_NUM_THREADS_DYNAMIC=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOC_BUS=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_TARGET_CPU="e6500"
+CONFIG_TARGET_CPU_BOOL=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_THREAD_SHIFT=14
+# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
+CONFIG_TOOLS_SUPPORT_RELR=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_UCLAMP_TASK is not set
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_VGA_CONSOLE=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_XPS=y
+CONFIG_ZLIB_DEFLATE=y

target/linux/qoriq/files/arch/powerpc/boot/dts/fsl/watchguard-firebox-m300.dts

@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * WatchGuard Firebox M300 Device Tree Source
+ * Based on t2081qds.dts from Linux 5.10
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ * Copyright 2020 - 2021 Stijn Tintel <stijn@linux-ipv6.be>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "WatchGuard Firebox M300";
+	compatible = "watchguard,firebox-m300", "fsl,T2081QDS";
+
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+		/delete-property/ ethernet2;
+		/delete-property/ ethernet3;
+		/delete-property/ ethernet4;
+		/delete-property/ ethernet5;
+		/delete-property/ ethernet6;
+		/delete-property/ ethernet7;
+
+		ethernet0 = &enet7;
+		ethernet1 = &enet0;
+		ethernet2 = &enet1;
+		ethernet3 = &enet2;
+		ethernet4 = &enet3;
+
+		led-boot = &led_shield;
+		led-failsafe = &led_shield;
+		led-running = &led_shield;
+		led-upgrade = &led_shield;
+	};
+};
+
+&soc {
+// Include first to make this the first interface
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+};
+
+// mdio-mux under &boardctrl + its aliases removed. causes crash:
+// Oops: Machine check, sig: 7 [#1]
+
+/include/ "t2081si-post.dtsi"
+
+// add stuff below the include to make sure we override whatever is there
+
+&enet0 {
+	phy-connection-type = "sgmii";
+	phy-handle = <&phy1>;
+};
+
+&enet1 {
+	phy-connection-type = "sgmii";
+	phy-handle = <&phy2>;
+};
+
+&enet2 {
+	phy-connection-type = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&enet3 {
+	phy-connection-type = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&enet4 {
+	status = "disabled";
+};
+
+&enet5 {
+	status = "disabled";
+};
+
+&enet6 {
+	status = "disabled";
+};
+
+&enet7 {
+	phy-connection-type = "sgmii";
+	phy-handle = <&phy0>;
+};
+
+&ifc {
+	ranges = <0x00 0x00 0x0f 0xefc00000 0x400000>;
+
+	nor@0,0 {
+		reg = <0x00 0x00 0x400000>;
+
+		partition@0{
+			reg = <0x0 0x10000>;
+			label = "qoriq-rcw";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x10000 0x20000>;
+			label = "wg_cfg0";
+			read-only;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_cfg_186c: macaddr@186c {
+					compatible = "mac-base";
+					reg = <0x186c 0x11>;
+					#nvmem-cell-cells = <1>;
+				};
+
+				macaddr_cfg_1880: macaddr@1880 {
+					compatible = "mac-base";
+					reg = <0x1880 0x11>;
+					#nvmem-cell-cells = <1>;
+				};
+
+				macaddr_cfg_1894: macaddr@1894 {
+					compatible = "mac-base";
+					reg = <0x1894 0x11>;
+					#nvmem-cell-cells = <1>;
+				};
+
+				macaddr_cfg_18a8: macaddr@18a8 {
+					compatible = "mac-base";
+					reg = <0x18a8 0x11>;
+					#nvmem-cell-cells = <1>;
+				};
+
+				macaddr_cfg_18bc: macaddr@18bc {
+					compatible = "mac-base";
+					reg = <0x18bc 0x11>;
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
+
+		partition@30000 {
+			reg = <0x30000 0x10000>;
+			label = "wg_cfg1";
+			read-only;
+		};
+
+		partition@40000 {
+			reg = <0x40000 0x10000>;
+			label = "wg_mfg_data";
+			read-only;
+		};
+
+		partition@50000 {
+			reg = <0x50000 0xb0000>;
+			label = "wg_bootopt_data_and_reserved";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x100000 0xb0000>;
+			label = "wg_extra_reserved_1";
+			read-only;
+		};
+
+		partition@1B0000 {
+			reg = <0x1b0000 0xb0000>;
+			label = "wg_extra_reserved_2";
+			read-only;
+		};
+
+		partition@260000 {
+			reg = <0x260000 0xc0000>;
+			label = "wg_u-boot_failsafe";
+			read-only;
+		};
+
+		partition@320000 {
+			reg = <0x320000 0x10000>;
+			label = "qoriq-fman";
+			read-only;
+		};
+
+		partition@330000 {
+			reg = <0x330000 0x10000>;
+			label = "u-boot-env";
+		};
+
+		partition@340000 {
+			reg = <0x340000 0xc0000>;
+			label = "u-boot";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		status = "disabled";
+	};
+};
+
+&mdio0 {
+	// m300 ethernet port 0
+	phy0: ethernet-phy@0 {
+		reg = <0x00>;
+	};
+
+	// m300 ethernet port 1
+	phy1: ethernet-phy@1 {
+		reg = <0x01>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <0x02>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <0x03>;
+	};
+
+	switch0: switch@10 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x10>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@0 {
+				reg = <0x00>;
+				interrupt-parent = <&switch0>;
+			};
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x01>;
+				interrupt-parent = <&switch0>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x02>;
+				interrupt-parent = <&switch0>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x03>;
+				interrupt-parent = <&switch0>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x04>;
+				interrupt-parent = <&switch0>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "sweth3";
+				phy-handle = <&switch0phy0>;
+
+				nvmem-cells = <&macaddr_cfg_186c 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "sweth4";
+				phy-handle = <&switch0phy1>;
+
+				nvmem-cells = <&macaddr_cfg_1880 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "sweth5";
+				phy-handle = <&switch0phy2>;
+
+				nvmem-cells = <&macaddr_cfg_1894 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "sweth6";
+				phy-handle = <&switch0phy3>;
+
+				nvmem-cells = <&macaddr_cfg_18a8 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "sweth7";
+				phy-handle = <&switch0phy4>;
+
+				nvmem-cells = <&macaddr_cfg_18bc 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			// OEM bootlog suggests multiple ports are attached to switch
+			// Keep this until OEM supplies GPL sources
+			port@5 {
+				status = "disabled";
+
+				reg = "<5>";
+				ethernet = <&enet2>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				ethernet = <&enet3>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	i2c@118000 {
+		tpm@29 {
+			compatible = "tpm,tpm_i2c_atmel";
+			reg = <0x29>;
+		};
+		hwmon@2c {
+			compatible = "winbond,w83793";
+			reg = <0x2c>;
+		};
+		hwmon@2d {
+			compatible = "winbond,w83793";
+			reg = <0x2d>;
+		};
+		rtc@32 {
+			compatible = "ricoh,rs5c372a";
+			reg = <0x32>;
+		};
+		pca9547@77 {
+			status = "disabled";
+		};
+	};
+
+	spi@110000 {
+		// DTS decompiled from OEM DTB contains flash@0 but doesn't work
+		// spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
+		// disable for now
+		flash@0 {
+			status = "disabled";
+		};
+
+		flash@1 {
+			status = "disabled";
+		};
+
+		flash@2 {
+			status = "disabled";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		shield-red {
+			label = "red:shield";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_shield: shield-green {
+			label = "green:shield";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};

target/linux/qoriq/generic/target.mk

@@ -0,0 +1,5 @@
+define Target/Description
+        Build firmware images for NXP QorIQ boards in the
+        T-Series(T1-T5) aka AMP Series platforms.
+        Features the e5500 and e6500 64-bit Power Architecture cores.
+endef

target/linux/qoriq/image/Makefile

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+SQUASHFSCOMP := xz $(LZMA_XZ_OPTIONS)
+
+define Build/sdcard-img
+        rm -fR $@.boot
+        mkdir -p $@.boot
+        $(CP) $(KDIR)/$(DEVICE_NAME)$(KERNEL_SUFFIX) $@.boot
+        $(if $(DEVICE_DTS),\
+                $(foreach dtb,$(DEVICE_DTS),$(CP) $(KDIR)/image-$(dtb).dtb $@.boot), \
+                $(CP) $(KDIR)/image-/*.dtb $@.boot)
+
+        PADDING=1 $(SCRIPT_DIR)/gen_image_generic.sh \
+                $@ \
+                $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+                $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
+                2048
+
+        $(if $(UBOOT),dd if=$(STAGING_DIR_IMAGE)/$(UBOOT).img of=$@ bs=512 skip=1 seek=1 conv=notrunc)
+endef
+
+define Device/Default
+  PROFILES := Default
+  DEVICE_DTS := $(subst _,-,$(1))
+  KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+  KERNEL_ENTRY := 0x00000000
+  KERNEL_LOADADDR := 0x00000000
+  KERNEL := kernel-bin
+endef
+
+include $(SUBTARGET).mk
+
+$(eval $(call BuildImage))

target/linux/qoriq/image/generic.mk

@@ -0,0 +1,17 @@
+define Device/watchguard_firebox-m300
+  DEVICE_VENDOR := WatchGuard
+  DEVICE_MODEL := Firebox M300
+  DEVICE_COMPAT_MESSAGE := \
+	Kernel switched to FIT uImage. Update U-Boot environment.
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_DTS_DIR := $(DTS_DIR)/fsl
+  DEVICE_PACKAGES := \
+	kmod-gpio-button-hotplug kmod-hwmon-w83793 kmod-leds-gpio kmod-ptp-qoriq \
+	kmod-rtc-rs5c372a kmod-tpm-i2c-atmel
+  KERNEL := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_SUFFIX := -fit-uImage.itb
+  IMAGES := sdcard.img.gz sysupgrade.img.gz
+  IMAGE/sysupgrade.img.gz :=  sdcard-img | gzip | append-metadata
+  IMAGE/sdcard.img.gz := sdcard-img | gzip
+endef
+TARGET_DEVICES += watchguard_firebox-m300