Initial commit

target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds

@@ -0,0 +1,77 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+arcadyan,aw1000)
+	ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
+	ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:1c:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
+asus,rt-ax89x)
+	ucidef_set_led_netdev "aqr" "AQR" "white:aqr10g" "10g-copper"
+	ucidef_set_led_netdev "sfp" "SFP" "white:sfp" "10g-sfp"
+	ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
+	;;
+dynalink,dl-wrx36)
+	ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"
+	ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000"
+	;;
+edgecore,eap102)
+	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
+	;;
+netgear,rax120v2)
+	ucidef_set_led_netdev "aqr" "AQR" "white:aqr" "lan5"
+	;;
+netgear,wax218)
+	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
+	ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"
+	ucidef_set_led_wlan "wlan2g" "WIFI 2.4GHz" "blue:wlan2g" "phy1radio"
+	;;
+netgear,wax620)
+	ucidef_set_led_netdev "lan" "LAN" "lan:green" "lan"
+	;;
+netgear,wax630)
+	ucidef_set_led_netdev "lan1" "LAN1" "lan1:green" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "lan2:green" "lan2"
+	;;
+redmi,ax6)
+	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
+	;;
+xiaomi,ax3600)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:01:green:wan" "wan" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "90000.mdio-1:02:green:lan" "lan1" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "90000.mdio-1:03:green:lan" "lan2" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "90000.mdio-1:04:green:lan" "lan3" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
+	;;
+xiaomi,ax9000)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "90000.mdio-1:03:green:lan" "lan1" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "90000.mdio-1:02:green:lan" "lan2" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "90000.mdio-1:01:green:lan" "lan3" "tx rx link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "90000.mdio-1:00:green:lan" "lan4" "tx rx link_10 link_100 link_1000"
+	;;
+qnap,301w)
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan-1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan-2" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN3" "green:lan-3" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN4" "green:lan-4" "lan4"
+	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g-1" "10g-1"
+	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g-2" "10g-2"
+	;;
+yuncore,ax880)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	ucidef_set_led_netdev "lan-port-link" "LAN-PORT-LINK" "90000.mdio-1:1c:green:lan" "lan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
+zbtlink,zbt-z800ax)
+	ucidef_set_led_netdev "internet" "Internet" "green:wan-online" "wan"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network

@@ -0,0 +1,112 @@
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq807x_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	asus,rt-ax89x)
+		ucidef_set_interfaces_lan_wan "10g-sfp 10g-copper lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8" "wan"
+		;;
+	arcadyan,aw1000|\
+	buffalo,wxr-5950ax12|\
+	dynalink,dl-wrx36|\
+	linksys,mx5300|\
+	linksys,mx8500|\
+	xiaomi,ax9000|\
+	zbtlink,zbt-z800ax)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	cmcc,rm2-6)
+		ucidef_set_interfaces_lan_wan "lan plc" "wan"
+		;;
+	compex,wpq873|\
+	linksys,mx4200v1|\
+	linksys,mx4200v2|\
+	prpl,haze|\
+	redmi,ax6|\
+	spectrum,sax1v1k|\
+	xiaomi,ax3600)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
+	edgecore,eap102|\
+	yuncore,ax880|\
+	zte,mf269)
+		ucidef_set_interfaces_lan_wan "lan" "wan"
+		;;
+	edimax,cax1800)
+		ucidef_set_interfaces_lan_wan "lan"
+		;;
+	netgear,rax120v2)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "wan"
+		;;
+	netgear,sxr80|\
+	netgear,sxs80)
+		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
+		;;
+	netgear,wax218|\
+	netgear,wax620)
+		ucidef_set_interface_lan "lan" "dhcp"
+		;;
+	netgear,wax630)
+		ucidef_set_interface_lan "lan1 lan2" "dhcp"
+		;;
+	qnap,301w)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
+		;;
+	tplink,eap660hd-v1)
+		ucidef_set_interface_lan "lan" "dhcp"
+		;;
+	zyxel,nbg7815)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not initialized"
+		;;
+	esac
+}
+
+ipq807x_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+		linksys,mx4200v2)
+			label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+			for i in $(seq 3 5); do
+				[ "$(mtd_get_mac_ascii u_env eth${i}addr)" != "$label_mac" ] && lan_mac=$label_mac
+			done
+			[ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && wan_mac=$label_mac
+		;;
+		linksys,mx8500)
+			label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+			lan_mac=$(macaddr_add $label_mac 1)
+			wan_mac=$label_mac
+		;;
+		tplink,eap660hd-v1)
+			label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
+			lan_mac=$label_mac
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ipq807x_setup_interfaces $board
+ipq807x_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -0,0 +1,125 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
+	case "$board" in
+	asus,rt-ax89x)
+		CI_UBIPART="UBI_DEV"
+		caldata_extract_ubi "Factory" 0x1000 0x20000
+		;;
+	arcadyan,aw1000|\
+	buffalo,wxr-5950ax12|\
+	cmcc,rm2-6|\
+	compex,wpq873|\
+	dynalink,dl-wrx36|\
+	edgecore,eap102|\
+	edimax,cax1800|\
+	linksys,mx5300|\
+	netgear,wax218|\
+	qnap,301w|\
+	redmi,ax6|\
+	xiaomi,ax3600|\
+	xiaomi,ax9000|\
+	yuncore,ax880|\
+	zte,mf269)
+		caldata_extract "0:art" 0x1000 0x20000
+		;;
+	linksys,mx4200v1|\
+	linksys,mx8500)
+		caldata_extract "0:art" 0x1000 0x20000
+		ath11k_remove_regdomain
+		;;
+	linksys,mx4200v2)
+		caldata_extract "0:art" 0x1000 0x20000
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ath11k_patch_mac $(macaddr_add $label_mac 2) 0
+		ath11k_patch_mac $(macaddr_add $label_mac 1) 1
+		ath11k_patch_mac $(macaddr_add $label_mac 3) 2
+		ath11k_remove_regdomain
+		ath11k_set_macflag
+		;;
+	netgear,rax120v2)
+		caldata_extract "0:art" 0x1000 0x20000
+		ath11k_patch_mac $(mtd_get_mac_binary boarddata1 0xc) 0
+		ath11k_patch_mac $(mtd_get_mac_binary boarddata1 0x0) 1
+		ath11k_patch_mac $(mtd_get_mac_binary boarddata1 0x6) 2
+		ath11k_set_macflag
+		;;
+	netgear,sxr80|\
+	netgear,sxs80)
+		caldata_extract "0:art" 0x1000 0x20000
+		label_mac=$(get_mac_label)
+		ath11k_patch_mac $(mtd_get_mac_binary boarddata1 0x0c) 0
+		#boarddata1 doesn't have a MAC for the 2G interface
+		ath11k_patch_mac $(macaddr_setbit_la $label_mac) 1
+		ath11k_patch_mac $(mtd_get_mac_binary boarddata1 0x12) 2
+		ath11k_set_macflag
+		;;
+	netgear,wax620)
+		caldata_extract "0:art" 0x1000 0x20000
+		label_mac=$(get_mac_label)
+		ath11k_patch_mac $(macaddr_add $label_mac -31) 1
+		ath11k_patch_mac $(macaddr_add $label_mac 1) 0
+		ath11k_set_macflag
+		;;
+	netgear,wax630)
+		caldata_extract "0:art" 0x1000 0x20000
+		label_mac=$(get_mac_label)
+		ath11k_patch_mac $(macaddr_add $label_mac -31) 1
+		ath11k_patch_mac $(macaddr_add $label_mac 1) 0
+		ath11k_patch_mac $(macaddr_add $label_mac 33) 2
+		ath11k_set_macflag
+		;;
+	prpl,haze|\
+	spectrum,sax1v1k)
+		caldata_extract_mmc "0:ART" 0x1000 0x20000
+		;;
+	tplink,eap660hd-v1)
+		caldata_from_file "/tmp/factory_data/radio" 0 0x20000
+		label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
+		ath11k_patch_mac $label_mac 1
+		ath11k_patch_mac $(macaddr_add $label_mac 1) 0
+		ath11k_set_macflag
+		;;
+	zbtlink,zbt-z800ax)
+		caldata_extract "0:art" 0x1000 0x20000
+		label_mac=$(get_mac_label)
+		ath11k_patch_mac $(macaddr_add $label_mac -1) 0
+		ath11k_patch_mac $(macaddr_add $label_mac -2) 1
+		ath11k_set_macflag
+		;;
+	zyxel,nbg7815)
+		caldata_extract "0:art" 0x1000 0x20000
+		label_mac=$(get_mac_label)
+		ath11k_patch_mac $(macaddr_add $label_mac 3) 0
+		ath11k_patch_mac $(macaddr_add $label_mac 2) 1
+		ath11k_patch_mac $(macaddr_add $label_mac 4) 2
+		ath11k_set_macflag
+		;;
+	esac
+	;;
+"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
+"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
+	case "$board" in
+	linksys,mx8500)
+		caldata_extract "0:art" 0x26800 0x20000
+		ath11k_remove_regdomain
+		;;
+	prpl,haze)
+		caldata_extract_mmc "0:ART" 0x26800 0x20000
+		;;
+	xiaomi,ax9000)
+		caldata_extract "0:art" 0x26800 0x20000
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/05-wifi-migrate

@@ -0,0 +1,68 @@
+#!/bin/sh
+
+# This must run before 10-wifi-detect
+
+[ "${ACTION}" = "add" ] || return
+
+. /lib/functions.sh
+
+check_kernel()
+{
+	local kernel_current=$(uname -r)
+	if [ ${kernel_current//./} -lt "6600" ]; then
+	  return 1
+	fi
+}
+
+do_migrate_radio()
+{
+	local cfg="$1" from="$2" to="$3"
+
+	config_get path "$cfg" path
+
+	[ "$path" = "$from" ] || return
+
+	uci set "wireless.${cfg}.path=${to}"
+	WIRELESS_CHANGED=true
+
+	logger -t wifi-migrate "Updated path of wireless.${cfg} from '${from}' to '${to}'"
+}
+
+check_path()
+{
+	local config
+	config="$1"
+
+	config_get path "$config" path
+
+	to=${path/soc\//soc@0\/}
+
+	# Checks if kernel version is less than 6.6.0, if it is and the path is using the new format,
+	# then path should be migrated to the old format. This would allow users on platforms with two partitions,
+	# to test 6.1 and 6.6.
+	check_kernel || to=${path/soc@0\//soc\/}
+
+	[ "$path" = "$to" ] || do_migrate_radio "$config" "$path" "$to"
+}
+
+migrate_radio()
+{
+	config_load wireless
+
+	# Check if there is already a section with the target path: In this case, the system
+	# was already upgraded to a version without this migration script before; better bail out,
+	# as we can't be sure we don't break more than we fix.
+	config_foreach check_path wifi-device
+}
+
+WIRELESS_CHANGED=false
+
+case "$(board_name)" in
+*)
+	migrate_radio
+    ;;
+esac
+
+$WIRELESS_CHANGED && uci commit wireless
+
+exit 0

target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -0,0 +1,26 @@
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+	arcadyan,aw1000)
+		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
+		;;
+	buffalo,wxr-5950ax12)
+		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label)  8 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 16 > /sys${DEVPATH}/macaddress
+		;;
+	cmcc,rm2-6|\
+	zte,mf269)
+		[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress
+		;;
+esac

target/linux/qualcommax/ipq807x/base-files/etc/init.d/bootcount

@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	edgecore,eap102|\
+	yuncore,ax880)
+		fw_setenv upgrade_available 0
+		# Unset changed flag after sysupgrade complete
+		fw_setenv changed
+	;;
+	linksys,mx4200v1|\
+	linksys,mx4200v2|\
+	linksys,mx5300|\
+	linksys,mx8500)
+		mtd resetbc s_env || true
+	;;
+	esac
+}

target/linux/qualcommax/ipq807x/base-files/etc/init.d/smp_affinity

@@ -0,0 +1,122 @@
+#!/bin/sh /etc/rc.common
+######################################################################
+# vim: set ft=bash
+# shellcheck disable=2155,3019,3043,3057,3060
+######################################################################
+
+START=93
+
+PROG=smp_affinity
+
+log_msg() {
+
+  local irq_name="$1" affinity="$2" irq="$3"
+
+  msg="$(printf "Pinning IRQ($irq) %-24s to CPU ${affinity}\n" "$irq_name")"
+
+  logger -t "$PROG" "$msg"
+}
+
+######################################################################
+### Takes a comma, space separated, or range list of CPU numbers and
+## returns a bitmask of CPUs.
+## cpus_to_bitmask "0,1,2,3" -> f
+## cpus_to_bitmask "0 1 2 3" -> f
+## cpus_to_bitmask "0-3"     -> f
+## cpus_to_bitmask "3"       -> 8
+#######################################################################
+
+cpus_to_bitmask() {
+
+  local bitmask=0
+  # shellcheck disable=2048
+  for range in ${*//,/ }; do
+    start="${range%-*}"
+    end="${range#*-}"
+    if [ -z "$end" ]; then
+      bitmask="$((bitmask | 1 << start))"
+    else
+      bitmask="$((bitmask | (2 ** (end - start + 1) - 1) << start))"
+    fi
+  done
+  printf '%x' $bitmask
+}
+
+######################################################################
+### Takes a bitmask of CPUs and returns a space separated list of
+## CPU numbers.
+## bitmask_to_cpus f -> 0 1 2 3
+######################################################################
+
+bitmask_to_cpus() {
+
+  [ "${1:0:2}" != "0x" ] && set -- "0x$1"
+  local bitmask="$(printf '%d' "$1")"
+
+  local cpus=""
+  for i in $(seq 0 63); do
+    if [ $((bitmask & 1)) -ne 0 ]; then
+      cpus="$cpus $i"
+    fi
+    bitmask=$((bitmask >> 1))
+  done
+  echo "${cpus# }"
+}
+
+######################################################################
+### Sets the affinity of the IRQs with the given name to the given CPU.
+## 1st argument: IRQ name ("reo2host-destination-ring1") (req)
+## 2nd argument: CPU number (req)
+######################################################################
+
+set_affinity() {
+
+  local irq_name="$1" affinity="$2" bitmask irq
+  awk -v irq_name="$1" '$0 ~ irq_name { print substr($1, 1, length($1)-1); exit }' /proc/interrupts \
+    | while read -r irq; do
+      $enable_log && {
+        log_msg "$irq_name" "$affinity" "$irq"
+      }
+      bitmask=$(cpus_to_bitmask "$affinity") && echo "$bitmask" > "/proc/irq/$irq/smp_affinity"
+    done
+}
+
+enable_affinity_ipq807x() {
+
+  # assign 4 rx interrupts to each core
+  set_affinity 'reo2host-destination-ring1'    0
+  set_affinity 'reo2host-destination-ring2'    1
+  set_affinity 'reo2host-destination-ring3'    2
+  set_affinity 'reo2host-destination-ring4'    3
+
+  # assign 3 tcl completions to last 3 CPUs
+  set_affinity 'wbm2host-tx-completions-ring1' 1
+  set_affinity 'wbm2host-tx-completions-ring2' 2
+  set_affinity 'wbm2host-tx-completions-ring3' 3
+
+  # assign 3 ppdu mac interrupts to last 3 cores
+  set_affinity 'ppdu-end-interrupts-mac1'      1
+  set_affinity 'ppdu-end-interrupts-mac2'      2
+  set_affinity 'ppdu-end-interrupts-mac3'      3
+
+  # assign 4 lan/wan to core 4
+  set_affinity 'edma_txcmpl'                   3
+  set_affinity 'edma_rxfill'                   3
+  set_affinity 'edma_rxdesc'                   3
+  set_affinity 'edma_misc'                     3
+}
+
+boot() {
+
+  local enable
+
+  config_load     smp_affinity
+
+  config_get_bool enable     "general" enable     1
+  config_get_bool enable_log "general" enable_log 1
+
+  [ "$enable"     -eq 1 ] && enable=true     || enable=false
+  [ "$enable_log" -eq 1 ] && enable_log=true || enable_log=false
+
+  $enable && enable_affinity_ipq807x
+}

target/linux/qualcommax/ipq807x/base-files/etc/uci-defaults/15_smp_affinity

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+uci -q get smp_affinity && exit 0
+touch /etc/config/smp_affinity
+
+uci -q batch << EOF
+  set smp_affinity.general=smp_affinity
+  set smp_affinity.general.enable='1'
+  set smp_affinity.general.enable_log='1'
+  commit smp_affinity
+EOF

target/linux/qualcommax/ipq807x/base-files/lib/preinit/09_mount_factory_data

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+preinit_mount_factory_data() {
+	local mtd_path
+
+	. /lib/functions.sh
+	. /lib/functions/system.sh
+
+	case $(board_name) in
+	tplink,eap660hd-v1)
+		mtd_path=$(find_mtd_chardev "factory_data")
+		ubiattach --dev-path="$mtd_path" --devn=1
+		mkdir /tmp/factory_data
+		mount -o ro,noatime -t ubifs ubi1:ubi_factory_data /tmp/factory_data
+		;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_mount_factory_data

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/buffalo.sh

@@ -0,0 +1,55 @@
+. /lib/functions.sh
+
+# Prepare UBI devices for OpenWrt installation
+# - rootfs (mtd22)
+#   - remove "ubi_rootfs" volume (rootfs on stock)
+#   - remove "fw_hash" volume (firmware hash)
+# - user_property (mtd24)
+#   - remove "user_property_ubi" volume (user configuration)
+#   - remove "extra_property" volume (gzipped syslog)
+buffalo_upgrade_prepare() {
+	local ubi_rootdev ubi_propdev
+
+	if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
+	   ! ubi_propdev="$(nand_attach_ubi user_property)"; then
+		echo "failed to attach UBI volume \"rootfs\" or \"user_property\", rebooting..."
+		reboot -f
+	fi
+
+	ubirmvol /dev/$ubi_rootdev -N ubi_rootfs &> /dev/null || true
+	ubirmvol /dev/$ubi_rootdev -N fw_hash &> /dev/null || true
+
+	ubirmvol /dev/$ubi_propdev -N user_property_ubi &> /dev/null || true
+	ubirmvol /dev/$ubi_propdev -N extra_property &> /dev/null || true
+}
+
+# Re-create small dummy ubi_rootfs volume and update
+# fw_hash volume to pass the checking by U-Boot
+# - rootfs (mtd22)
+#   - re-create "ubi_rootfs" volume
+#   - re-create and update "fw_hash" volume
+# - rootfs_recover (mtd23)
+#   - update "fw_hash" volume
+buffalo_upgrade_optvol() {
+	local ubi_rootdev ubi_rcvrdev
+	local hashvol_root hashvol_rcvr
+
+	if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
+	   ! ubi_rcvrdev="$(nand_attach_ubi rootfs_recover)"; then
+		echo "failed to attach UBI volume \"rootfs\" or \"rootfs_recover\", rebooting..."
+		reboot -f
+	fi
+
+	ubimkvol /dev/$ubi_rootdev -N ubi_rootfs -S 1
+	ubimkvol /dev/$ubi_rootdev -N fw_hash -S 1 -t static
+
+	if ! hashvol_root="$(nand_find_volume $ubi_rootdev fw_hash)" || \
+	   ! hashvol_rcvr="$(nand_find_volume $ubi_rcvrdev fw_hash)"; then
+		echo "\"fw_hash\" volume in \"rootfs\" or \"rootfs_recover\" not found, rebooting..."
+		reboot -f
+	fi
+
+	echo -n "00000000000000000000000000000000" > /tmp/dummyhash.txt
+	ubiupdatevol /dev/$hashvol_root /tmp/dummyhash.txt
+	ubiupdatevol /dev/$hashvol_rcvr /tmp/dummyhash.txt
+}

target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,277 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv head'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+xiaomi_initramfs_prepare() {
+	# Wipe UBI if running initramfs
+	[ "$(rootfs_type)" = "tmpfs" ] || return 0
+
+	local rootfs_mtdnum="$( find_mtd_index rootfs )"
+	if [ ! "$rootfs_mtdnum" ]; then
+		echo "unable to find mtd partition rootfs"
+		return 1
+	fi
+
+	local kern_mtdnum="$( find_mtd_index ubi_kernel )"
+	if [ ! "$kern_mtdnum" ]; then
+		echo "unable to find mtd partition ubi_kernel"
+		return 1
+	fi
+
+	ubidetach -m "$rootfs_mtdnum"
+	ubiformat /dev/mtd$rootfs_mtdnum -y
+
+	ubidetach -m "$kern_mtdnum"
+	ubiformat /dev/mtd$kern_mtdnum -y
+}
+
+asus_initial_setup() {
+	# Remove existing linux and jffs2 volumes
+	[ "$(rootfs_type)" = "tmpfs" ] || return 0
+
+	ubirmvol /dev/ubi0 -N linux
+	ubirmvol /dev/ubi0 -N jffs2
+}
+
+remove_oem_ubi_volume() {
+	local oem_volume_name="$1"
+	local oem_ubivol
+	local mtdnum
+	local ubidev
+
+	mtdnum=$(find_mtd_index "$CI_UBIPART")
+	if [ ! "$mtdnum" ]; then
+		return
+	fi
+
+	ubidev=$(nand_find_ubi "$CI_UBIPART")
+	if [ ! "$ubidev" ]; then
+		ubiattach --mtdn="$mtdnum"
+		ubidev=$(nand_find_ubi "$CI_UBIPART")
+	fi
+
+	if [ "$ubidev" ]; then
+		oem_ubivol=$(nand_find_volume "$ubidev" "$oem_volume_name")
+		[ "$oem_ubivol" ] && ubirmvol "/dev/$ubidev" --name="$oem_volume_name"
+	fi
+}
+
+tplink_get_boot_part() {
+	local cur_boot_part
+	local args
+
+	# Try to find rootfs from kernel arguments
+	read -r args < /proc/cmdline
+	for arg in $args; do
+		local ubi_mtd_arg=${arg#ubi.mtd=}
+		case "$ubi_mtd_arg" in
+		rootfs|rootfs_1)
+			echo "$ubi_mtd_arg"
+			return
+		;;
+		esac
+	done
+
+	# Fallback to u-boot env (e.g. when running initramfs)
+	cur_boot_part="$(/usr/sbin/fw_printenv -n tp_boot_idx)"
+	case $cur_boot_part in
+	1)
+		echo rootfs_1
+		;;
+	0|*)
+		echo rootfs
+		;;
+	esac
+}
+
+tplink_do_upgrade() {
+	local new_boot_part
+
+	case $(tplink_get_boot_part) in
+	rootfs)
+		CI_UBIPART="rootfs_1"
+		new_boot_part=1
+	;;
+	rootfs_1)
+		CI_UBIPART="rootfs"
+		new_boot_part=0
+	;;
+	esac
+
+	fw_setenv -s - <<-EOF
+		tp_boot_idx $new_boot_part
+	EOF
+
+	remove_oem_ubi_volume ubi_rootfs
+	nand_do_upgrade "$1"
+}
+
+platform_check_image() {
+	return 0;
+}
+
+platform_pre_upgrade() {
+	case "$(board_name)" in
+	asus,rt-ax89x)
+		asus_initial_setup
+		;;
+	redmi,ax6|\
+	xiaomi,ax3600|\
+	xiaomi,ax9000)
+		xiaomi_initramfs_prepare
+		;;
+	esac
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	arcadyan,aw1000|\
+	cmcc,rm2-6|\
+	compex,wpq873|\
+	dynalink,dl-wrx36|\
+	edimax,cax1800|\
+	netgear,rax120v2|\
+	netgear,sxr80|\
+	netgear,sxs80|\
+	netgear,wax218|\
+	netgear,wax620|\
+	netgear,wax630)
+		nand_do_upgrade "$1"
+		;;
+	asus,rt-ax89x)
+		CI_UBIPART="UBI_DEV"
+		CI_KERNPART="linux"
+		CI_ROOTPART="jffs2"
+		nand_do_upgrade "$1"
+		;;
+	buffalo,wxr-5950ax12)
+		CI_KERN_UBIPART="rootfs"
+		CI_ROOT_UBIPART="user_property"
+		buffalo_upgrade_prepare
+		nand_do_flash_file "$1" || nand_do_upgrade_failed
+		nand_do_restore_config || nand_do_upgrade_failed
+		buffalo_upgrade_optvol
+		;;
+	edgecore,eap102)
+		active="$(fw_printenv -n active)"
+		if [ "$active" -eq "1" ]; then
+			CI_UBIPART="rootfs2"
+		else
+			CI_UBIPART="rootfs1"
+		fi
+		# force altbootcmd which handles partition change in u-boot
+		fw_setenv bootcount 3
+		fw_setenv upgrade_available 1
+		nand_do_upgrade "$1"
+		;;
+	linksys,mx4200v1|\
+	linksys,mx4200v2|\
+	linksys,mx5300|\
+	linksys,mx8500)
+		boot_part="$(fw_printenv -n boot_part)"
+		if [ "$boot_part" -eq "1" ]; then
+			fw_setenv boot_part 2
+			CI_KERNPART="alt_kernel"
+			CI_UBIPART="alt_rootfs"
+		else
+			fw_setenv boot_part 1
+			CI_UBIPART="rootfs"
+		fi
+		fw_setenv boot_part_ready 3
+		fw_setenv auto_recovery yes
+		nand_do_upgrade "$1"
+		;;
+	prpl,haze|\
+	qnap,301w)
+		CI_KERNPART="0:HLOS"
+		CI_ROOTPART="rootfs"
+		emmc_do_upgrade "$1"
+		;;
+	redmi,ax6|\
+	xiaomi,ax3600|\
+	xiaomi,ax9000)
+		# Make sure that UART is enabled
+		fw_setenv boot_wait on
+		fw_setenv uart_en 1
+
+		# Enforce single partition.
+		fw_setenv flag_boot_rootfs 0
+		fw_setenv flag_last_success 0
+		fw_setenv flag_boot_success 1
+		fw_setenv flag_try_sys1_failed 8
+		fw_setenv flag_try_sys2_failed 8
+
+		# Kernel and rootfs are placed in 2 different UBI
+		CI_KERN_UBIPART="ubi_kernel"
+		CI_ROOT_UBIPART="rootfs"
+		nand_do_upgrade "$1"
+		;;
+	spectrum,sax1v1k)
+		CI_KERNPART="0:HLOS"
+		CI_ROOTPART="rootfs"
+		CI_DATAPART="rootfs_data"
+		emmc_do_upgrade "$1"
+		;;
+	tplink,eap660hd-v1)
+		tplink_do_upgrade "$1"
+		;;
+	yuncore,ax880)
+		active="$(fw_printenv -n active)"
+		if [ "$active" -eq "1" ]; then
+			CI_UBIPART="rootfs_1"
+		else
+			CI_UBIPART="rootfs"
+		fi
+		# force altbootcmd which handles partition change in u-boot
+		fw_setenv bootcount 3
+		fw_setenv upgrade_available 1
+		nand_do_upgrade "$1"
+		;;
+	zbtlink,zbt-z800ax)
+		local mtdnum="$(find_mtd_index 0:bootconfig)"
+		local alt_mtdnum="$(find_mtd_index 0:bootconfig1)"
+		part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$mtdnum | cut -f 1 -d "|" | head -n1)"
+		# vendor firmware may swap the rootfs partition location, u-boot append: ubi.mtd=rootfs
+		# since we use fixed-partitions, need to force boot from the first rootfs partition
+		if [ "$part_num" -eq "1" ]; then
+			mtd erase /dev/mtd$mtdnum
+			mtd erase /dev/mtd$alt_mtdnum
+		fi
+		nand_do_upgrade "$1"
+		;;
+	zte,mf269)
+		CI_KERN_UBIPART="ubi_kernel"
+		CI_ROOT_UBIPART="rootfs"
+		nand_do_upgrade "$1"
+		;;
+	zyxel,nbg7815)
+		local config_mtdnum="$(find_mtd_index 0:bootconfig)"
+		[ -z "$config_mtdnum" ] && reboot
+		part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
+		if [ "$part_num" -eq "0" ]; then
+			CI_KERNPART="0:HLOS"
+			CI_ROOTPART="rootfs"
+		else
+			CI_KERNPART="0:HLOS_1"
+			CI_ROOTPART="rootfs_1"
+		fi
+		emmc_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}
+
+platform_copy_config() {
+	case "$(board_name)" in
+	prpl,haze|\
+	qnap,301w|\
+	spectrum,sax1v1k|\
+	zyxel,nbg7815)
+		emmc_copy_config
+		;;
+	esac
+}