Initial commit

target/linux/ramips/dts/mt7620a.dtsi

@@ -0,0 +1,648 @@
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mt7620a-soc";
+
+	aliases {
+		spi0 = &spi0;
+		spi1 = &spi1;
+		serial0 = &uartlite;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			reg = <0>;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	cpuintc: cpuintc {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	mmc_reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+
+		enable-active-high;
+
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "mmc_io";
+	};
+
+	mmc_reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+
+		enable-active-high;
+
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "mmc_power";
+	};
+
+	palmbus: palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc: syscon@0 {
+			compatible = "ralink,mt7620-sysc", "syscon";
+			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@100 {
+			compatible = "ralink,rt2880-timer";
+			reg = <0x100 0x20>;
+
+			clocks = <&sysc 7>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
+		};
+
+		watchdog: watchdog@120 {
+			compatible = "ralink,rt2880-wdt";
+			reg = <0x120 0x10>;
+
+			clocks = <&sysc 8>;
+
+			resets = <&sysc 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <1>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc: memc@300 {
+			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		uart: uart@500 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0x500 0x100>;
+
+			clocks = <&sysc 9>;
+
+			resets = <&sysc 12>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <5>;
+
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		gpio0: gpio@600 {
+			compatible = "ralink,rt2880-gpio";
+			reg = <0x600 0x34>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ngpios = <24>;
+			ralink,register-map = [ 00 04 08 0c
+						20 24 28 2c
+						30 34 ];
+		};
+
+		gpio1: gpio@638 {
+			compatible = "ralink,rt2880-gpio";
+			reg = <0x638 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ngpios = <16>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		gpio2: gpio@660 {
+			compatible = "ralink,rt2880-gpio";
+			reg = <0x660 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ngpios = <32>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		gpio3: gpio@688 {
+			compatible = "ralink,rt2880-gpio";
+			reg = <0x688 0x24>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ngpios = <1>;
+			ralink,register-map = [ 00 04 08 0c
+						10 14 18 1c
+						20 24 ];
+
+			status = "disabled";
+		};
+
+		i2c: i2c@900 {
+			compatible = "ralink,rt2880-i2c";
+			reg = <0x900 0x100>;
+
+			clocks = <&sysc 10>;
+
+			resets = <&sysc 16>;
+			reset-names = "i2c";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c_pins>;
+		};
+
+		i2s: i2s@a00 {
+			compatible = "mediatek,mt7620-i2s";
+			reg = <0xa00 0x100>;
+
+			clocks = <&sysc 11>;
+
+			resets = <&sysc 17>;
+			reset-names = "i2s";
+
+			interrupt-parent = <&intc>;
+			interrupts = <10>;
+
+			txdma-req = <2>;
+			rxdma-req = <3>;
+
+			dmas = <&gdma 4>,
+				<&gdma 6>;
+			dma-names = "tx", "rx";
+
+			status = "disabled";
+		};
+
+		spi0: spi@b00 {
+			compatible = "ralink,rt2880-spi";
+			reg = <0xb00 0x40>;
+
+			clocks = <&sysc 12>;
+
+			resets = <&sysc 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_pins>;
+		};
+
+		spi1: spi@b40 {
+			compatible = "ralink,rt2880-spi";
+			reg = <0xb40 0x60>;
+
+			clocks = <&sysc 13>;
+
+			resets = <&sysc 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_cs1>;
+		};
+
+		uartlite: uartlite@c00 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			clocks = <&sysc 14>;
+
+			resets = <&sysc 19>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uartlite_pins>;
+		};
+
+		systick: systick@d00 {
+			compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
+			reg = <0xd00 0x10>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <7>;
+		};
+
+		pcm: pcm@2000 {
+			compatible = "ralink,mt7620a-pcm";
+			reg = <0x2000 0x800>;
+
+			resets = <&sysc 11>;
+			reset-names = "pcm";
+
+			interrupt-parent = <&intc>;
+			interrupts = <4>;
+
+			status = "disabled";
+		};
+
+		gdma: gdma@2800 {
+			compatible = "ralink,rt3883-gdma";
+			reg = <0x2800 0x800>;
+
+			resets = <&sysc 14>;
+			reset-names = "dma";
+
+			interrupt-parent = <&intc>;
+			interrupts = <7>;
+
+			#dma-cells = <1>;
+			#dma-channels = <16>;
+			#dma-requests = <16>;
+
+			status = "disabled";
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "ralink,rt2880-pinmux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinctrl0 {
+		};
+
+		pcm_i2s_pins: pcm_i2s {
+			pcm_i2s {
+				groups = "uartf";
+				function = "pcm i2s";
+			};
+		};
+
+		uartf_gpio_pins: uartf_gpio {
+			uartf_gpio {
+				groups = "uartf";
+				function = "gpio uartf";
+			};
+		};
+
+		gpio_i2s_pins: gpio_i2s {
+			gpio_i2s {
+				groups = "uartf";
+				function = "gpio i2s";
+			};
+		};
+
+		spi_pins: spi_pins {
+			spi_pins {
+				groups = "spi";
+				function = "spi";
+			};
+		};
+
+		spi_cs1: spi1 {
+			spi1 {
+				groups = "spi refclk";
+				function = "spi refclk";
+			};
+		};
+
+		i2c_pins: i2c_pins {
+			i2c_pins {
+				groups = "i2c";
+				function = "i2c";
+			};
+		};
+
+		uartlite_pins: uartlite {
+			uart {
+				groups = "uartlite";
+				function = "uartlite";
+			};
+		};
+
+		mdio_pins: mdio {
+			mdio {
+				groups = "mdio";
+				function = "mdio";
+			};
+		};
+
+		mdio_refclk_pins: mdio_refclk {
+			mdio_refclk {
+				groups = "mdio";
+				function = "refclk";
+			};
+		};
+
+		ephy_pins: ephy {
+			ephy {
+				groups = "ephy";
+				function = "ephy";
+			};
+		};
+
+		wled_pins: wled {
+			wled {
+				groups = "wled";
+				function = "wled";
+			};
+		};
+
+		rgmii1_pins: rgmii1 {
+			rgmii1 {
+				groups = "rgmii1";
+				function = "rgmii1";
+			};
+		};
+
+		rgmii2_pins: rgmii2 {
+			rgmii2 {
+				groups = "rgmii2";
+				function = "rgmii2";
+			};
+		};
+
+		pcie_pins: pcie {
+			pcie {
+				groups = "pcie";
+				function = "pcie rst";
+			};
+		};
+
+		pa_pins: pa {
+			pa {
+				groups = "pa";
+				function = "pa";
+			};
+		};
+
+		pa_gpio_pins: pa_gpio {
+			pa {
+				groups = "pa";
+				function = "gpio";
+			};
+		};
+
+		sdhci_pins: sdhci {
+			sdhci {
+				groups = "nd_sd";
+				function = "sd";
+			};
+		};
+	};
+
+	usbphy: usbphy {
+		compatible = "mediatek,mt7620-usbphy";
+		#phy-cells = <0>;
+
+		ralink,sysctl = <&sysc>;
+		/* usb phy reset is only controled by RSTCTRL bit 25 */
+		resets = <&sysc 25>, <&sysc 22>;
+		reset-names = "host", "device";
+	};
+
+	ethernet: ethernet@10100000 {
+		compatible = "mediatek,mt7620-eth";
+		reg = <0x10100000 0x10000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <5>;
+
+		resets = <&sysc 21>, <&sysc 23>;
+		reset-names = "fe", "esw";
+
+		mediatek,switch = <&gsw>;
+
+		port@4 {
+			compatible = "mediatek,eth-port";
+			reg = <4>;
+
+			status = "disabled";
+		};
+
+		port@5 {
+			compatible = "mediatek,eth-port";
+			reg = <5>;
+
+			status = "disabled";
+		};
+
+		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	gsw: gsw@10110000 {
+		compatible = "mediatek,mt7620-gsw";
+		reg = <0x10110000 0x8000>;
+
+		resets = <&sysc 24>;
+		reset-names = "ephy";
+
+		interrupt-parent = <&intc>;
+		interrupts = <17>;
+	};
+
+	sdhci: mmc@10130000 {
+		compatible = "mediatek,mt7620-mmc", "ralink,mt7620-sdhci";
+		reg = <0x10130000 0x4000>;
+
+		bus-width = <4>;
+
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+
+		clocks = <&sysc 15>, <&sysc 15>;
+		clock-names = "source", "hclk";
+
+		disable-wp;
+
+		interrupt-parent = <&intc>;
+		interrupts = <14>;
+
+		max-frequency = <48000000>;
+
+		pinctrl-names = "default", "state_uhs";
+		pinctrl-0 = <&sdhci_pins>;
+		pinctrl-1 = <&sdhci_pins>;
+
+		resets = <&sysc 30>;
+		reset-names = "hrst";
+
+		vmmc-supply = <&mmc_reg_3v3>;
+		vqmmc-supply = <&mmc_reg_1v8>;
+
+		status = "disabled";
+	};
+
+	ehci: ehci@101c0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		phys = <&usbphy>;
+		phy-names = "usb";
+
+		status = "disabled";
+
+		ehci_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+	};
+
+	ohci: ohci@101c1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "generic-ohci";
+		reg = <0x101c1000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		phys = <&usbphy>;
+		phy-names = "usb";
+
+		status = "disabled";
+
+		ohci_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+	};
+
+	pcie: pcie@10140000 {
+		compatible = "mediatek,mt7620-pci";
+		reg = <0x10140000 0x100
+			0x10142000 0x100>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		resets = <&sysc 26>;
+		reset-names = "pcie0";
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pins>;
+
+		device_type = "pci";
+
+		bus-range = <0 255>;
+		ranges = <
+			0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+			0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+		>;
+
+		status = "disabled";
+
+		pcie0: pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			device_type = "pci";
+
+			ranges;
+		};
+	};
+
+	wmac: wmac@10180000 {
+		compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
+		reg = <0x10180000 0x40000>;
+
+		clocks = <&sysc 16>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		ralink,eeprom = "soc_wmac.eeprom";
+	};
+};

target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts

@@ -0,0 +1,132 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "aigale,ai-br100", "ralink,mt7620a-soc";
+	model = "Aigale Ai-BR100";
+
+	aliases {
+		led-boot = &led_wlan;
+		led-failsafe = &led_wlan;
+		led-running = &led_wlan;
+		led-upgrade = &led_wlan;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wlan: wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "u-boot-env";
+				reg = <0x20000 0x10000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "factory";
+				reg = <0x30000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x40000 0x7c0000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_alfa-network_ac1200rm.dts

@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ *  Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *  All rights reserved.
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc";
+	model = "ALFA Network AC1200RM";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wps: wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		led {
+			led-sources = <2>;
+			led-active-low;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "nd_sd", "spi refclk", "wled";
+		function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x1000>;
+			};
+
+			partition@31000 {
+				label = "config";
+				reg = <0x31000 0xf000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_alfa-network_r36m-e4g.dts

@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "alfa-network,r36m-e4g", "ralink,mt7620a-soc";
+	model = "ALFA Network R36M-E4G";
+
+	aliases {
+		label-mac-device = &wmac;
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,115200";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		modem-enable {
+			gpio-export,name = "modem-enable";
+			gpio-export,output = <1>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		modem-rf-enable {
+			gpio-export,name = "modem-rf-enable";
+			gpio-export,output = <1>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		rtc-enable {
+			gpio-export,name = "rtc-enable";
+			gpio-export,output = <1>;
+			gpio-export,direction_may_change = <1>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		sim-select {
+			gpio-export,name = "sim-select";
+			gpio-export,output = <0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		sim1-detect {
+			gpio-export,name = "sim1-detect";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		sim2-detect {
+			gpio-export,name = "sim2-detect";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		4g {
+			label = "orange:4g";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led_system: system {
+			label = "green:system";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		sim1 {
+			label = "green:sim1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		sim2 {
+			label = "green:sim2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "ephy", "pcie", "rgmii1", "wled";
+		function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x1000>;
+			};
+
+			partition@31000 {
+				label = "config";
+				reg = <0x31000 0xf000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_alfa-network_tube-e4g.dts

@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "alfa-network,tube-e4g", "ralink,mt7620a-soc";
+	model = "ALFA Network Tube-E4G";
+
+	aliases {
+		label-mac-device = &ethernet;
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		modem-enable {
+			gpio-export,name = "modem-enable";
+			gpio-export,output = <1>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		modem-rf-enable {
+			gpio-export,name = "modem-rf-enable";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		sim-select {
+			gpio-export,name = "sim-select";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sim1-detect {
+			gpio-export,name = "sim1-detect";
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		sim2-detect {
+			gpio-export,name = "sim2-detect";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		4g {
+			label = "green:4g";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		sim1 {
+			label = "green:sim1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		sim2 {
+			label = "green:sim2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&state_default {
+	gpio {
+		groups = "ephy", "nd_sd", "pcie", "uartf";
+		function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x1000>;
+			};
+
+			partition@31000 {
+				label = "config";
+				reg = <0x31000 0xf000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "disabled";
+};

target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts

@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_edimax_ew-747x.dtsi"
+
+/ {
+	compatible = "ampedwireless,b1200ex", "ralink,mt7620a-soc";
+	model = "Amped Wireless B1200EX";
+
+	leds {
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1radio";
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+
+		signal_strength {
+			label = "green:signal_strength";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_asus_rp-n53.dts

@@ -0,0 +1,188 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "asus,rp-n53", "ralink,mt7620a-soc";
+	model = "Asus RP-N53";
+
+	keys {
+		compatible = "gpio-keys";
+
+		touch {
+			label = "touch";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		audio {
+			label = "audio";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		backlight {
+			label = "white:back";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi0 {
+			label = "blue:5g3";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi1 {
+			label = "blue:5g2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2 {
+			label = "blue:5g1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi3 {
+			label = "blue:wifi";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi4 {
+			label = "blue:2g1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi5 {
+			label = "blue:2g2";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi6 {
+			label = "blue:2g3";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+};
+
+&i2s {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&pcm {
+	status = "okay";
+};
+
+&gdma {
+	status = "okay";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "mdio", "rgmii1";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci1814,5592";
+		reg = <0x0000 0 0 0 0>;
+		ralink,2ghz = <0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+	};
+};

target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts

@@ -0,0 +1,14 @@
+#include "mt7620a_asus_rt-ac5x.dtsi"
+
+/ {
+	compatible = "asus,rt-ac51u", "ralink,mt7620a-soc";
+	model = "Asus RT-AC51U";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+	};
+};

target/linux/ramips/dts/mt7620a_asus_rt-ac54u.dts

@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_asus_rt-ac5x.dtsi"
+
+/ {
+	compatible = "asus,rt-ac54u", "ralink,mt7620a-soc";
+	model = "Asus RT-AC54U";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		led {
+			led-sources = <2>;
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_asus_rt-ac5x.dtsi

@@ -0,0 +1,159 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		label-mac-device = &ethernet;
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		wifi2g {
+			label = "blue:wifi2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&gpio0 {
+	enable-leds {
+		gpio-hog;
+		line-name = "enable-leds";
+		output-low;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "wled", "uartf";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_bdcom_wap2100-sk.dts

@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc";
+	model = "BDCOM WAP2100-SK";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led_power: wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf70000>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&state_default {
+	default {
+		groups = "spi refclk", "uartf", "wled";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_bolt_bl100.dts

@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "bolt,bl100", "ralink,mt7620a-soc";
+	model = "Bolt BL100";
+
+	aliases {
+		led-boot = &led_reset;
+		led-failsafe = &led_reset;
+		led-running = &led_power;
+		led-upgrade = &led_reset;
+		label-mac-device = &ethernet;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_reset: reset {
+			function = LED_FUNCTION_BOOT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lte1 {
+			label = "blue:lte1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lte2 {
+			label = "blue:lte2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lte3 {
+			label = "blue:lte3";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lte4 {
+			label = "blue:lte4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		
+		led_lte5 {
+			label = "red:lte5";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lte6 {
+			label = "red:lte6";
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led_voip {
+			label = "blue:voip";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wlan2 {
+			function = LED_FUNCTION_WLAN_2GHZ;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+		
+		led_wlan5 {
+			function = LED_FUNCTION_WLAN_5GHZ;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+		
+		led_lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		
+		led_wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "RST";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				compatible = "nvmem-cells";
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x50000 0xf80000>;
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <0x26112015>;
+			};
+
+			partition@fd0000 {
+				label = "crash";
+				reg = <0xfd0000 0x10000>;
+			};
+
+			partition@fe0000 {
+				label = "reserved";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+			};
+
+			partition@ff0000 {
+				label = "Bdata";
+				reg = <0xff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+	
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+		function = "gpio";
+	};
+};
+

target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts

@@ -0,0 +1,199 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
+	model = "Buffalo WHR-1166D";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_green: power2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2 {
+			label = "orange:wifi";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "green:internet";
+			gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+		};
+
+		router {
+			label = "orange:router";
+			gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+		};
+
+		router2 {
+			label = "green:router";
+			gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		aoss {
+			label = "aoss";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		ap {
+			label = "ap";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		bridge {
+			label = "bridge";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "wled", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};

target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts

@@ -0,0 +1,171 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
+	model = "Buffalo WHR-300HP2";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_green: power2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2 {
+			label = "orange:wifi";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "green:internet";
+			gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+		};
+
+		router {
+			label = "green:router";
+			gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+		};
+
+		router2 {
+			label = "orange:router";
+			gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		aoss {
+			label = "aoss";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		ap {
+			label = "ap";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		bridge {
+			label = "bridge";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_buffalo_whr-600d.dts

@@ -0,0 +1,185 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
+	model = "Buffalo WHR-600D";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_green: power2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2 {
+			label = "orange:wifi";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "green:internet";
+			gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+		};
+
+		router {
+			label = "green:router";
+			gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+		};
+
+		router2 {
+			label = "orange:router";
+			gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		aoss {
+			label = "aoss";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		ap {
+			label = "ap";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		bridge {
+			label = "bridge";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci1814,5592";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+	};
+};

target/linux/ramips/dts/mt7620a_cameo_810.dtsi

@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		label-mac-device = &ethernet;
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_green {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_orange {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan_green {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		power_orange {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						compatible = "mac-base";
+						reg = <0x28 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "factory5g";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "Wolf_Config";
+				reg = <0x60000 0x10000>;
+				read-only;
+			};
+
+			partition@70000 {
+				label = "MyDlink";
+				reg = <0x70000 0x80000>;
+				read-only;
+			};
+
+			partition@f0000 {
+				label = "Jffs2";
+				reg = <0xf0000 0x80000>;
+				read-only;
+			};
+
+			partition@170000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x170000 0x690000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "ephy";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28 0>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+	nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_28 0>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_28 2>;
+		nvmem-cell-names = "eeprom", "mac-address";
+	};
+};

target/linux/ramips/dts/mt7620a_dlink_dch-m225.dts

@@ -0,0 +1,198 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
+	model = "D-Link DCH-M225";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		status {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio-I2S";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HP_L",
+			"Headphones", "HP_R";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+
+		dailink0_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+
+		wlf,shared-lrclk;
+	};
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_refclk_pins>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x4000>;
+				read-only;
+			};
+
+			partition@34000 {
+				label = "factory";
+				reg = <0x34000 0x4000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@38000 {
+				label = "nvram";
+				reg = <0x38000 0x8000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "devconf";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "upgrade_rec";
+				reg = <0x50000 0x100000>;
+				read-only;
+			};
+
+			partition@150000 {
+				compatible = "seama";
+				label = "firmware";
+				reg = <0x150000 0x6b0000>;
+			};
+		};
+	};
+};
+
+&gdma {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "wdt", "rgmii1";
+		function = "gpio";
+	};
+
+	gpio_i2s {
+		groups = "uartf";
+		function = "gpio i2s";
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_dlink_dir-510l.dts

@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
+	model = "D-Link DIR-510L";
+
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,57600";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status: status {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		status-red {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ethernet {
+	mediatek,portmap = "llllw";
+};
+
+&uart {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "jboot";
+				reg = <0x0 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				label = "recovery";
+				reg = <0x10000 0x200000>;
+				read-only;
+			};
+
+			partition@210000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,offset = <0x10000>;
+				label = "firmware";
+				reg = <0x210000 0xde0000>;
+			};
+
+			partition@ff0000 {
+				label = "config";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_config_e05d: eeprom@e05d {
+						reg = <0xe05d 0x200>;
+					};
+
+					macaddr_config_e490: macaddr@e490 {
+						compatible = "mac-base";
+						reg = <0xe490 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76x0e@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_config_e05d>, <&macaddr_config_e490 2>;
+		nvmem-cell-names = "eeprom", "mac-address";
+	};
+};
+
+&state_default {
+	default {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_dlink_dir-806a-b1.dts

@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "dlink,dir-806a-b1", "ralink,mt7620a-soc";
+	model = "D-Link DIR-806A B1";
+
+	aliases {
+		led-boot = &wps_led;
+		led-failsafe = &wps_led;
+		led-running = &wps_led;
+		led-upgrade = &wps_led;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;	// #12
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wifi_led: 2.4g {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;	// #72
+		};
+
+		wps_led: wps {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;	// #39
+		};
+
+	};
+
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ALL";
+				reg = <0x0 0x800000>;
+				read-only;
+			};
+
+			partition@0_1 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "Factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						compatible = "mac-base";
+						reg = <0x4 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+
+					macaddr_factory_8004: macaddr@8004 {
+						compatible = "mac-base";
+						reg = <0x8004 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "ephy";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4 (-2)>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+
+	nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4 (-1)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_8004 (-3)>;
+		nvmem-cell-names = "eeprom", "mac-address";
+
+		led {
+			led-active-low;
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts

@@ -0,0 +1,6 @@
+#include "mt7620a_cameo_810.dtsi"
+
+/ {
+	compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
+	model = "D-Link DIR-810L";
+};

target/linux/ramips/dts/mt7620a_dlink_dwr-118-a1.dts

@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
+	model = "D-Link DWR-118 A1";
+
+	aliases {
+		led-boot = &led_internet;
+		led-failsafe = &led_internet;
+		led-upgrade = &led_internet;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_internet: internet {
+			label = "green:internet";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <0>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "jboot";
+				reg = <0x0 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,offset = <0x10000>;
+				label = "firmware";
+				reg = <0x10000 0xfe0000>;
+			};
+
+			partition@ff0000 {
+				label = "config";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_config_e083: eeprom@e083 {
+						reg = <0xe083 0x200>;
+					};
+
+					macaddr_config_e496: macaddr@e496 {
+						compatible = "mac-base";
+						reg = <0xe496 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&state_default {
+	default {
+		groups = "ephy", "uartf", "spi refclk", "wled";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_config_e083>, <&macaddr_config_e496 2>;
+		nvmem-cell-names = "eeprom", "mac-address";
+
+		led {
+			led-sources = <0>;
+			led-active-low;
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy4>;
+		phy-mode = "rgmii";
+	};
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii-rxid";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};

target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts

@@ -0,0 +1,197 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc";
+	model = "D-Link DWR-118 A2";
+
+	aliases {
+		led-boot = &led_internet;
+		led-failsafe = &led_internet;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_internet: internet {
+			label = "green:internet";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "jboot";
+				reg = <0x0 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,offset = <0x10000>;
+				label = "firmware";
+				reg = <0x10000 0xfe0000>;
+			};
+
+			partition@ff0000 {
+				label = "config";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_config_e4a8: macaddr@e4a8 {
+						compatible = "mac-base";
+						reg = <0xe4a8 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&state_default {
+	default {
+		groups = "ephy", "uartf", "spi refclk", "wled";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		nvmem-cells = <&macaddr_config_e4a8 2>;
+		nvmem-cell-names = "mac-address";
+
+		led {
+			led-sources = <2>;
+			led-active-low;
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	mediatek,portmap = "wllll";
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy0>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii-rxid";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <2>;
+};

target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts

@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_dlink_dwr-96x.dtsi"
+
+/ {
+	compatible = "dlink,dwr-960", "ralink,mt7620a-soc";
+	model = "D-Link DWR-960";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+
+	mediatek,portmap = "wllll";
+
+	port@5 {
+		status = "okay";
+		phy-mode = "rgmii-txid";
+		phy-handle = <&phy7>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy7: ethernet-phy@7 {
+			reg = <7>;
+			phy-mode = "rgmii-id";
+		};
+	};
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_config_e08e>, <&macaddr_config_e50e 2>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_dlink_dwr-961-a1.dts

@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * D-Link DWR-961 A1 Board Description
+ * Copyright 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+#include "mt7620a_dlink_dwr-96x.dtsi"
+
+/ {
+	compatible = "dlink,dwr-961-a1", "ralink,mt7620a-soc";
+	model = "D-Link DWR-961 A1";
+
+	leds {
+		hidden-1 { /* hidden next to wlan5g led */
+			label = "green:hidden-1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		hidden-2 { /* hidden next to sms led*/
+			label = "green:hidden-2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		phy-mode = "rgmii";
+		mediatek,fixed-link = <1000 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+			qca,ar8327-initvals = <
+				0x04 0x87300000 /* PORT0 PAD MODE CTRL */
+				0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+				0x7c 0x0000007e /* PORT0_STATUS */
+				0x80 0x00001200 /* PORT1_STATUS */
+				0x84 0x00001200 /* PORT2_STATUS */
+				0x88 0x00001200 /* PORT3_STATUS */
+				0x8c 0x00001200 /* PORT4_STATUS */
+				0x90 0x00001200 /* PORT5_STATUS */
+				0x94 0x00000000 /* PORT6_STATUS */
+			>;
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_config_e29e>, <&macaddr_config_e50e 2>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_dlink_dwr-96x.dtsi

@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * D-Link DWR-96x Common Board Description
+ * Copyright 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status: status {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		sms {
+			label = "green:sms";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		signal_green {
+			label = "green:signal";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		signal_red {
+			label = "red:signal";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		4g {
+			label = "green:4g";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+		};
+
+		3g {
+			label = "green:3g";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi: wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "jboot";
+				reg = <0x0 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,offset = <0x10000>;
+				label = "firmware";
+				reg = <0x10000 0xfe0000>;
+			};
+
+			partition@ff0000 {
+				label = "config";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_config_e08e: eeprom@e08e {
+						reg = <0xe08e 0x200>;
+					};
+
+					eeprom_config_e29e: eeprom@e29e {
+						reg = <0xe29e 0x200>;
+					};
+
+					macaddr_config_e50e: macaddr@e50e {
+						compatible = "mac-base";
+						reg = <0xe50e 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&state_default {
+	default {
+		groups = "i2c", "wled", "spi refclk", "uartf", "ephy";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_domywifi.dtsi

@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		led-boot = &led_system_amber;
+		led-failsafe = &led_system_amber;
+		led-running = &led_system_green;
+		led-upgrade = &led_system_amber;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system_green: system_green {
+			label = "green:system";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led_system_amber: system_amber {
+			label = "amber:system";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_green {
+			label = "green:internet";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_amber {
+			label = "amber:internet";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		lan1 {
+			label = "amber:lan1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2 {
+			label = "amber:lan2";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		lan3 {
+			label = "amber:lan3";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		lan4 {
+			label = "amber:lan4";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "rgmii1", "wled";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	mediatek,portmap = "wllll";
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		led {
+			led-sources = <0>;
+			led-active-low;
+		};
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_domywifi_dm202.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_domywifi.dtsi"
+
+/ {
+	compatible = "domywifi,dm202", "ralink,mt7620a-soc";
+	model = "DomyWifi DM202";
+};

target/linux/ramips/dts/mt7620a_domywifi_dm203.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_domywifi.dtsi"
+
+/ {
+	compatible = "domywifi,dm203", "ralink,mt7620a-soc";
+	model = "DomyWifi DM203";
+};

target/linux/ramips/dts/mt7620a_domywifi_dw22d.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_domywifi.dtsi"
+
+/ {
+	compatible = "domywifi,dw22d", "ralink,mt7620a-soc";
+	model = "DomyWifi DW22D";
+};

target/linux/ramips/dts/mt7620a_dovado_tiny-ac.dts

@@ -0,0 +1,172 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "dovado,tiny-ac", "ralink,mt7620a-soc";
+	model = "Dovado Tiny AC";
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		wifi {
+			label = "orange:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@4 {
+		status = "okay";
+		phy-mode = "rgmii";
+		phy-handle = <&phy4>;
+	};
+
+	port@5 {
+		status = "okay";
+		phy-mode = "rgmii";
+		phy-handle = <&phy5>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "nd_sd", "wled";
+		function = "gpio";
+	};
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};

target/linux/ramips/dts/mt7620a_edimax_br-6208ac-v2.dts

@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023 Stefan Weil <sw@weilnetz.de>
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "edimax,br-6208ac-v2", "ralink,mt7620a-soc";
+	model = "Edimax BR-6208AC v2";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_firmware;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		// Vendor firmware: /proc/RESET_BUTTON
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	// Vendor firmware: /proc/driver/led
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		// RALINK_REG_PIO3924DATA 39-24
+		led_internet: internet {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		// RALINK_REG_PIO7140DATA 44-40
+		led_wlan_2_4ghz: wlan_2_4ghz {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		// RALINK_REG_PIO7140DATA 43-40
+		led_wlan_5ghz: wlan_5ghz {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		// RALINK_REG_PIO7140DATA 42-40
+		led_firmware: firmware {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			// default-state = "keep";
+		};
+
+		// RALINK_REG_PIO7140DATA 41-40
+		led_vpn: vpn {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gdma {
+	status = "okay";
+};
+
+// Vendor firmware: RALINK_REG_PIO7140 - gpio0: gpio@600
+// Vendor firmware: RALINK_REG_PIO3924 - gpio1: gpio@638
+// Vendor firmware: RALINK_REG_PIO7140 - gpio2: gpio@660
+// Vendor firmware: RALINK_REG_PIO72   - gpio3: gpio@688
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			// Vendor partitions:
+			// 0x000000000000-0x000000030000 : "Bootloader"
+			// 0x000000030000-0x000000040000 : "Config"
+			// 0x000000040000-0x000000050000 : "Factory"
+			// 0x000000050000-0x000000070000 : "Cimage"
+			// 0x000000070000-0x000000fe0000 : "Uimage"
+			// 0x000000070000-0x000000190000 : "Kernel"
+			// 0x000000190000-0x000000fe0000 : "RootFS"
+			// 0x000000fe0000-0x000001000000 : "FreeSpace"
+
+			// Bootloader
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			// Config
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			// Factory
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+
+					macaddr_factory_2e: macaddr@2e {
+						reg = <0x2e 0x6>;
+					};
+				};
+			};
+
+			// Cimage
+			partition@50000 {
+				label = "cimage";
+				reg = <0x50000 0x20000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,offset = <FW_EDIMAX_OFFSET>;
+				openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
+				label = "firmware";
+				reg = <0x00070000 0x00f70000>;
+			};
+
+			// FreeSpace
+			partition@fe0000 {
+				label = "freespace";
+				reg = <0xfe0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		// TODO: "spi refclk"?
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_2e>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};

target/linux/ramips/dts/mt7620a_edimax_br-6478ac-v2.dts

@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Rohan Murch <rohan.murch@gmail.com>
+ * Copyright (C) 2016 Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ * Copyright (C) 2017 James McKenzie <openwrt@madingley.org>
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc";
+	model = "Edimax BR-6478AC v2";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+		usb-power {
+			gpio-export,name="usb-power";
+			gpio-export,output=<1>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "cimage";
+				reg = <0x50000 0x20000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,offset = <FW_EDIMAX_OFFSET>;
+				openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
+				label = "firmware";
+				reg = <0x00070000 0x00790000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy1f: ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts

@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_edimax_ew-747x.dtsi"
+
+/ {
+	compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc";
+	model = "Edimax EW-7476RPC";
+
+	keys {
+		switch_high {
+			label = "switch high";
+			gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		switch_off {
+			label = "switch off";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1radio";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+
+		crossband {
+			label = "green:crossband";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts

@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_edimax_ew-747x.dtsi"
+
+/ {
+	compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc";
+	model = "Edimax EW-7478AC";
+
+	keys {
+		switch_high {
+			label = "switch high";
+			gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		switch_off {
+			label = "switch off";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1radio";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+
+		crossband {
+			label = "green:crossband";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_edimax_ew-7478apc.dts

@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc";
+	model = "Edimax EW-7478APC";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+
+	enable_usb_power {
+		gpio-hog;
+		line-name = "enable USB power";
+		gpios = <5 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "cimage";
+				reg = <0x50000 0x20000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,offset = <FW_EDIMAX_OFFSET>;
+				openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
+				label = "firmware";
+				reg = <0x00070000 0x00790000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy1f: ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi

@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "ralink,mt7620a-soc";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						compatible = "mac-base";
+						reg = <0x4 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "cimage";
+				reg = <0x50000 0x20000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,offset = <FW_EDIMAX_OFFSET>;
+				openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
+				label = "firmware";
+				reg = <0x00070000 0x00790000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "nd_sd", "rgmii2";
+		function = "gpio";
+	};
+};
+
+&pinctrl {
+	phy_reset_pins: phy-reset {
+		gpio {
+			groups = "spi refclk";
+			function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>;
+
+	nvmem-cells = <&macaddr_factory_4 0>;
+	nvmem-cell-names = "mac-address";
+
+	phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <30>;
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			status = "disabled";
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		phy1: ethernet-phy@1 {
+			status = "disabled";
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		phy2: ethernet-phy@2 {
+			status = "disabled";
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		phy3: ethernet-phy@3 {
+			status = "disabled";
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		phy4: ethernet-phy@4 {
+			status = "disabled";
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4 0>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_4 2>;
+		nvmem-cell-names = "eeprom", "mac-address";
+	};
+};

target/linux/ramips/dts/mt7620a_engenius_epg600.dts

@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "engenius,epg600", "ralink,mt7620a-soc";
+	model = "EnGenius EPG600";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		reg {
+			linux,code = <BTN_0>;
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wps2g {
+			label = "blue:wps2g";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wps5g {
+			label = "amber:wps5g";
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		};
+
+		line {
+			label = "blue:line";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "rf";
+				reg = <0x50000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_rf_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_rf_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@60000 {
+				label = "firmware";
+				reg = <0x60000 0xf40000>;
+				compatible = "denx,uimage";
+			};
+
+			partition@fa0000 {
+				label = "backup";
+				reg = <0xfa0000 0x10000>;
+				read-only;
+			};
+
+			partition@fb0000 {
+				label = "storage";
+				reg = <0xfb0000 0x50000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins &rgmii1_pins &rgmii2_pins>;
+
+	nvmem-cells = <&macaddr_rf_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+
+		phy-mode = "rgmii-txid";
+
+		mediatek,fixed-link = <1000 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+
+			qca,ar8327-initvals = <
+				0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+				0x08 0x01000000 /* PORT5 PAD MODE CTRL */
+				0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+				0x10 0x40000000 /* POWER-ON STRAPPING  */
+				0x7c 0x0000007e /* PORT0_STATUS */
+				0x94 0x0000007e /* PORT6_STATUS */
+			>;
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-disable;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci1814,3091";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_0>;
+		nvmem-cell-names = "eeprom";
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_rf_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&state_default {
+	default {
+		groups = "ephy", "wled", "spi refclk", "i2c", "uartf", "nd_sd";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_engenius_esr600.dts

@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "engenius,esr600", "ralink,mt7620a-soc";
+	model = "EnGenius ESR600";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps2g {
+			label = "amber:wps2g";
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "iNIC_rf";
+				reg = <0x50000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_iNIC_rf_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_iNIC_rf_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@60000 {
+				label = "firmware";
+				reg = <0x60000 0xf40000>;
+				compatible = "denx,uimage";
+			};
+
+			partition@fa0000 {
+				label = "backup";
+				reg = <0xfa0000 0x10000>;
+				read-only;
+			};
+
+			partition@fb0000 {
+				label = "storage";
+				reg = <0xfb0000 0x50000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_iNIC_rf_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+		phy-mode = "rgmii";
+		mediatek,fixed-link = <1000 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+			qca,ar8327-initvals = <
+				0x10 0x40000000 /* POWER-ON STRAPPING */
+				0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+				0x7c 0x0000007e /* PORT0 STATUS */
+				0x0c 0x05600000 /* PORT6 PAD MODE CTRL */
+				0x94 0x0000007e /* PORT6 STATUS */
+			>;
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "nd_sd", "wled";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci1814,5592";
+		reg = <0x0 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_0>;
+		nvmem-cell-names = "eeprom";
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_iNIC_rf_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_fon_fon2601.dts

@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "fon,fon2601", "ralink,mt7620a-soc";
+	model = "Fon FON2601";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power_r {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_g {
+			label = "green:internet";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		net_g {
+			label = "green:net";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi_g {
+			label = "green:wifi";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,padding = <32>;
+				label = "firmware";
+				reg = <0x50000 0xf90000>;
+			};
+
+			partition@fe0000 {
+				label = "board_data";
+				reg = <0xfe0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+	nd_sd {
+		groups = "nd_sd";
+		function = "sd";
+	};
+	spi_cs {
+		groups = "spi refclk";
+		function = "spi refclk";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy4>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>, <&wled_pins>;
+	pinctrl-1 = <&pa_gpio_pins>, <&wled_pins>;
+};
+
+&pcie {
+	status = "okay";
+};
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci14c3,7662";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_glinet_gl-mt300a.dts

@@ -0,0 +1,160 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc";
+	model = "GL-MT300A";
+
+	aliases {
+		label-mac-device = &wmac;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wan {
+			label = "gl-mt300a:wan";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			label = "gl-mt300a:lan";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "gl-mt300a:wlan";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			label = "gl-mt300a:usb";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		BTN_0 {
+			label = "BTN_0";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		BTN_1 {
+			label = "BTN_1";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4000: macaddr@4000 {
+						reg = <0x4000 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf80000>;
+			};
+
+			partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4000>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "wled","ephy","uartf","i2c";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts

@@ -0,0 +1,151 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
+	model = "GL-MT300N";
+
+	aliases {
+		label-mac-device = &wmac;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wan {
+			label = "gl-mt300n:wan";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			label = "gl-mt300n:lan";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "gl-mt300n:wlan";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		BTN_0 {
+			label = "BTN_0";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		BTN_1 {
+			label = "BTN_1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4000: macaddr@4000 {
+						reg = <0x4000 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf80000>;
+			};
+
+			partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4000>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "wled","ephy","i2c";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_glinet_gl-mt750.dts

@@ -0,0 +1,171 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
+	model = "GL-MT750";
+
+	aliases {
+		label-mac-device = &wmac;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wan {
+			label = "gl-mt750:wan";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			label = "gl-mt750:lan";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "gl-mt750:wlan";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		BTN_0 {
+			label = "BTN_0";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		BTN_1 {
+			label = "BTN_1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4000: macaddr@4000 {
+						reg = <0x4000 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf80000>;
+			};
+
+			partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4000>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "wled","ephy","uartf";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_head-weblink_hdrm200.dts

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "head-weblink,hdrm200", "ralink,mt7620a-soc";
+	model = "Head Weblink HDRM200";
+
+	aliases {
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,57600";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		rssi {
+			label = "red:rssi";
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led_system: system {
+			label = "green:system";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		air {
+			label = "green:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy4>;
+		phy-mode = "rgmii";
+	};
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	default {
+		groups = "i2c", "uartf", "pa", "spi refclk",
+			       "wled";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&uart {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts

@@ -0,0 +1,33 @@
+#include "mt7620a_hiwifi_hc5x61.dtsi"
+
+/ {
+	compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5661";
+
+	aliases {
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "blue:system";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts

@@ -0,0 +1,71 @@
+#include "mt7620a_hiwifi_hc5x61.dtsi"
+
+/ {
+	compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5761";
+
+	aliases {
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "blue:system";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};

target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts

@@ -0,0 +1,119 @@
+#include "mt7620a_hiwifi_hc5x61.dtsi"
+
+/ {
+	compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5861";
+
+	aliases {
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "blue:system";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		turbo {
+			label = "blue:turbo";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&mmc_reg_3v3 {
+	/delete-property/ enable-active-high;
+
+	gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "pci14c3,7662";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&sdhci {
+	max-frequency = <24000000>;
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+};

target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi

@@ -0,0 +1,126 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "hw_panic";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf70000>;
+			};
+
+			partition@fc0000 {
+				label = "oem";
+				reg = <0xfc0000 0x20000>;
+				read-only;
+			};
+
+			partition@fe0000 {
+				label = "bdinfo";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+			};
+
+			partition@ff0000 {
+				label = "backup";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "wled";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_hnet_c108.dts

@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ *  Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ *  All rights reserved.
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "hnet,c108", "ralink,mt7620a-soc";
+	model = "HNET C108";
+
+	aliases {
+		led-boot = &led_lan_green;
+		led-failsafe = &led_lan_green;
+		led-running = &led_lan_green;
+		led-upgrade = &led_lan_green;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		power_modem {
+			gpio-export,name = "power_modem";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sdcard {
+			label = "green:sdcard";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		modem_green {
+			label = "green:modem";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		modem_red {
+			label = "red:modem";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		lan_red {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_lan_green: lan_green {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	default {
+		groups = "i2c", "uartf", "spi refclk", "ephy";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_humax_e2.dts

@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "humax,e2", "ralink,mt7620a-soc";
+	model = "HUMAX E2";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		pairing {
+			label = "green:pairing";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x30000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_10007: macaddr@10007 {
+						reg = <0x10007 0x6>;
+					};
+				};
+			};
+
+			partition@70000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,offset = <FW_EDIMAX_OFFSET>;
+				openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
+				label = "firmware";
+				reg = <0x70000 0x790000>;
+			};
+		};
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_10007>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "rgmii1";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_iodata_wn-ac1167gr.dts

@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
+	model = "I-O DATA WN-AC1167GR";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		notification {
+			label = "green:notification";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		auto {
+			label = "auto";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x8000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@48000 {
+				label = "iNIC_rf";
+				reg = <0x48000 0x8000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_iNIC_rf_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				label = "NoUsed";
+				reg = <0x50000 0x20000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x70000 0x6b4000>;
+			};
+
+			partition@724000 {
+				label = "manufacture";
+				reg = <0x724000 0x8c000>;
+				read-only;
+			};
+
+			partition@7b0000 {
+				label = "backup";
+				reg = <0x7b0000 0x10000>;
+				read-only;
+			};
+
+			partition@7c0000 {
+				label = "storage";
+				reg = <0x7c0000 0x40000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_iNIC_rf_0>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_iodata_wn-ac733gr3.dts

@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc";
+	model = "I-O DATA WN-AC733GR3";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		notification {
+			label = "green:notification";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		router {
+			label = "router";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		auto {
+			label = "auto";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	rtl8367rb {
+		compatible = "realtek,rtl8367b";
+		gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		realtek,extif = <6 1 0 1 1 1 1 1 1 2>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x8000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@48000 {
+				label = "iNIC_rf";
+				reg = <0x48000 0x8000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_iNIC_rf_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x6d4000>;
+			};
+
+			partition@724000 {
+				label = "manufacture";
+				reg = <0x724000 0x8c000>;
+				read-only;
+			};
+
+			partition@7b0000 {
+				label = "backup";
+				reg = <0x7b0000 0x10000>;
+				read-only;
+			};
+
+			partition@7c0000 {
+				label = "storage";
+				reg = <0x7c0000 0x40000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&gpio0 {
+	rtl8367rb_reset {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rtl8367rb-reset";
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "mdio";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_iNIC_rf_0>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_iptime.dtsi

@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		label-mac-device = &ethernet;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_uboot_1f400: eeprom@1f400 {
+						reg = <0x1f400 0x200>;
+					};
+
+					eeprom_uboot_1f800: eeprom@1f800 {
+						reg = <0x1f800 0x200>;
+					};
+
+					macaddr_uboot_1fc20: macaddr@1fc20 {
+						reg = <0x1fc20 0x6>;
+					};
+				};
+			};
+
+			partition@20000 {
+				label = "config";
+				reg = <0x20000 0x10000>;
+				read-only;
+			};
+
+			firmware: partition@30000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+			};
+		};
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_uboot_1fc20>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_uboot_1f800>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		led {
+			led-sources = <0>;
+			led-active-low;
+		};
+	};
+};
+
+&wmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wled_pins>;
+	nvmem-cells = <&eeprom_uboot_1f400>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_iptime_a1004ns.dts

@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_iptime.dtsi"
+
+/ {
+	compatible = "iptime,a1004ns", "ralink,mt7620a-soc";
+	model = "ipTIME A1004ns";
+
+	aliases {
+		led-boot = &led_cpu;
+		led-failsafe = &led_cpu;
+		led-running = &led_cpu;
+		led-upgrade = &led_cpu;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_cpu: cpu {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&firmware {
+	reg = <0x30000 0xfd0000>;
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "spi refclk";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};

target/linux/ramips/dts/mt7620a_iptime_a104ns.dts

@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_iptime.dtsi"
+
+/ {
+	compatible = "iptime,a104ns", "ralink,mt7620a-soc";
+	model = "ipTIME A104ns";
+
+	aliases {
+		led-boot = &led_cpu;
+		led-failsafe = &led_cpu;
+		led-running = &led_cpu;
+		led-upgrade = &led_cpu;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led_cpu: cpu {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&firmware {
+	reg = <0x30000 0x7d0000>;
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "spi refclk";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_kimax_u25awf-h1.dts

@@ -0,0 +1,129 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
+	model = "Kimax U25AWF-H1";
+
+	aliases {
+		led-boot = &led_wifi;
+		led-failsafe = &led_wifi;
+		led-running = &led_wifi;
+		led-upgrade = &led_wifi;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_wifi: wifi {
+			label = "red:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	default {
+		groups = "uartf", "ephy", "wled";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_lava_lr-25g001.dts

@@ -0,0 +1,181 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
+
+/ {
+	compatible = "lava,lr-25g001", "ralink,mt7620a-soc";
+	model = "LAVA LR-25G001";
+
+	aliases {
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status: status {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2g {
+			label = "green:wifi2g";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wifi5g {
+			label = "green:wifi5g";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "jboot";
+				reg = <0x0 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,offset = <0x10000>;
+				label = "firmware";
+				reg = <0x10000 0xfe0000>;
+			};
+
+			partition@ff0000 {
+				label = "config";
+				reg = <0xff0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_config_e08a: eeprom@e08a {
+						reg = <0xe08a 0x200>;
+					};
+
+					macaddr_config_e07e: macaddr@e07e {
+						compatible = "mac-base";
+						reg = <0xe07e 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		phy-mode = "rgmii";
+		mediatek,fixed-link = <1000 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+			qca,ar8327-initvals = <
+				0x04 0x87300000 /* PORT0 PAD MODE CTRL */
+				0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+				0x7c 0x0000007e /* PORT0_STATUS */
+				0x80 0x00001200 /* PORT1_STATUS */
+				0x84 0x00001200 /* PORT2_STATUS */
+				0x88 0x00001200 /* PORT3_STATUS */
+				0x8c 0x00001200 /* PORT4_STATUS */
+				0x90 0x00001200 /* PORT5_STATUS */
+				0x94 0x00000000 /* PORT6_STATUS */
+			>;
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76x0e@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_config_e08a>, <&macaddr_config_e07e 2>;
+		nvmem-cell-names = "eeprom", "mac-address";
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "i2c";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_lb-link_bl-w1200.dts

@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "lb-link,bl-w1200", "ralink,mt7620a-soc";
+	model = "LB-Link BL-W1200";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+		led-upgrade = &led_wps;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_wps: wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "spi refclk";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+
+		led {
+			led-sources = <2>;
+			led-active-low;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dts

@@ -0,0 +1,65 @@
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_lenovo_newifi-y1.dtsi"
+
+/ {
+	compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
+	model = "Lenovo Y1";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan1 {
+			label = "blue:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2 {
+			label = "blue:wifi5g";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};

target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dtsi

@@ -0,0 +1,124 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "wled", "nd_sd";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_lenovo_newifi-y1s.dts

@@ -0,0 +1,123 @@
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_lenovo_newifi-y1.dtsi"
+
+/ {
+	compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
+	model = "Lenovo Y1S";
+
+	aliases {
+		led-boot = &led_power_blue;
+		led-failsafe = &led_power_blue;
+		led-running = &led_power_blue;
+		led-upgrade = &led_power_blue;
+		label-mac-device = &ethernet;
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb0 {
+			gpio-export,name = "usb0";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+		};
+		usb1 {
+			gpio-export,name = "usb1";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+		};
+		usb2 {
+			gpio-export,name = "usb2";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power1 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_blue: power2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan1 {
+			label = "yellow:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2 {
+			label = "blue:wifi";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		internet {
+			label = "blue:internet";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy4>;
+		phy-mode = "rgmii";
+	};
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};

target/linux/ramips/dts/mt7620a_linksys_e1700.dts

@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "linksys,e1700", "ralink,mt7620a-soc";
+	model = "Linksys E1700";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy1f: ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_microduino_microwrt.dts

@@ -0,0 +1,113 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "microduino,microwrt", "ralink,mt7620a-soc";
+	model = "Microduino MicroWRT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "u-boot-env";
+				reg = <0x20000 0x10000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "factory";
+				reg = <0x30000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x40000 0xfc0000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	default {
+		groups = "wled", "i2c", "wdt", "uartf";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_netcore_nw5212.dts

@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "netcore,nw5212", "ralink,mt7620a-soc";
+	model = "Netcore NW5212";
+
+	aliases {
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		lan4 {
+			label = "green:lan4";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		lan3 {
+			label = "green:lan3";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2 {
+			label = "green:lan2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+		};
+
+		lan1 {
+			label = "green:lan1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "wled", "ephy";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	mediatek,portmap = "llllw";
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_netgear_ex2700.dts

@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Joseph C. Lehner <joseph.c.lehner@gmail.com>
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "netgear,ex2700", "ralink,mt7620a-soc";
+	model = "Netgear EX2700";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_g {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		power_r {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		device_g {
+			label = "green:device";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		device_r {
+			label = "red:device";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		router_g {
+			label = "green:router";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		router_r {
+			label = "red:router";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x40000 0x3b0000>;
+			};
+
+			partition@3f0000 {
+				label = "art";
+				reg = <0x3f0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_art_0: macaddr@0 {
+						reg = <0x0 0x6>;
+					};
+
+					macaddr_art_6: macaddr@6 {
+						reg = <0x6 0x6>;
+					};
+
+					eeprom_art_1000: eeprom@1000 {
+						reg = <0x1000 0x200>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_art_1000>, <&macaddr_art_6>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&state_default {
+	default {
+		groups = "i2c", "uartf", "spi refclk";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_netgear_ex3700.dts

@@ -0,0 +1,8 @@
+/* This file is released into the public domain */
+
+#include "mt7620a_netgear_ex3x00_ex61xx.dtsi"
+
+/ {
+	compatible = "netgear,ex3700", "ralink,mt7620a-soc";
+	model = "Netgear EX3700/EX3800";
+};

target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi

@@ -0,0 +1,178 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		led-boot = &led_power_amber;
+		led-failsafe = &led_power_amber;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_green {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led_power_amber: power_amber {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		router_green {
+			label = "green:router";
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		router_red {
+			label = "red:router";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+
+		device_green {
+			label = "green:device";
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		};
+
+		device_red {
+			label = "red:device";
+			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x790000>;
+			};
+
+			partition@7e0000 {
+				label = "board_data";
+				reg = <0x7e0000 0x10000>;
+				read-only;
+			};
+
+			partition@7f0000 {
+				label = "nvram";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	default {
+		groups = "i2c", "rgmii2", "spi refclk";
+		function = "gpio";
+	};
+};
+

target/linux/ramips/dts/mt7620a_netgear_ex6120.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_netgear_ex3x00_ex61xx.dtsi"
+
+/ {
+	compatible = "netgear,ex6120", "ralink,mt7620a-soc";
+	model = "Netgear EX6120";
+};

target/linux/ramips/dts/mt7620a_netgear_ex6130.dts

@@ -0,0 +1,12 @@
+/* This file is released into the public domain */
+
+#include "mt7620a_netgear_ex3x00_ex61xx.dtsi"
+
+/ {
+	compatible = "netgear,ex6130", "ralink,mt7620a-soc";
+	model = "Netgear EX6130";
+
+	aliases {
+		label-mac-device = &ethernet;
+	};
+};

target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts

@@ -0,0 +1,8 @@
+/* This file is released into the public domain */
+
+#include "mt7620a_netgear_wn3x00rp.dtsi"
+
+/ {
+	compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
+	model = "Netgear WN3000RP v3";
+};

target/linux/ramips/dts/mt7620a_netgear_wn3100rp-v2.dts

@@ -0,0 +1,8 @@
+/* This file is released into the public domain */
+
+#include "mt7620a_netgear_wn3x00rp.dtsi"
+
+/ {
+	compatible = "netgear,wn3100rp-v2", "ralink,mt7620a-soc";
+	model = "Netgear WN3100RP v2";
+};

target/linux/ramips/dts/mt7620a_netgear_wn3x00rp.dtsi

@@ -0,0 +1,164 @@
+/* This file is released into the public domain */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_green;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_green: power_g {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		power_r {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		client_g {
+			label = "green:client";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		client_r {
+			label = "red:client";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		router_g {
+			label = "green:router";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		router_r {
+			label = "red:router";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		l_arrow {
+			label = "blue:leftarrow";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		r_arrow {
+			label = "blue:rightarrow";
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x40000 0x7b0000>;
+			};
+
+			partition@7f0000 {
+				label = "art";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_art_0: macaddr@0 {
+						reg = <0x0 0x6>;
+					};
+
+					macaddr_art_6: macaddr@6 {
+						reg = <0x6 0x6>;
+					};
+
+					eeprom_art_1000: eeprom@1000 {
+						reg = <0x1000 0x200>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_art_1000>, <&macaddr_art_6>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&state_default {
+	default {
+		groups = "i2c", "uartf", "spi refclk";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_netis_wf2770.dts

@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "netis,wf2770", "ralink,mt7620a-soc";
+	model = "NETIS WF2770";
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		led-toggle {
+			label = "led-toggle";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts

@@ -0,0 +1,138 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc";
+	model = "OY-0001";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: powerled {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wifiled {
+			label = "green:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		s1 {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_phicomm_k2-v22.4.dts

@@ -0,0 +1,24 @@
+#include "mt7620a_phicomm_k2x.dtsi"
+
+/ {
+	compatible = "phicomm,k2-v22.4", "ralink,mt7620a-soc";
+	model = "Phicomm K2 v22.4 or older";
+};
+
+&partitions {
+	partition@50000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x50000 0x7b0000>;
+	};
+};
+
+&ethernet {
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+};

target/linux/ramips/dts/mt7620a_phicomm_k2-v22.5.dts

@@ -0,0 +1,30 @@
+#include "mt7620a_phicomm_k2x.dtsi"
+
+/ {
+	compatible = "phicomm,k2-v22.5", "ralink,mt7620a-soc";
+	model = "Phicomm K2 v22.5 or newer";
+};
+
+&partitions {
+	partition@50000 {
+		label = "permanent_config";
+		reg = <0x50000 0x50000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0xa0000 0x760000>;
+	};
+};
+
+&ethernet {
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+};

target/linux/ramips/dts/mt7620a_phicomm_k2g.dts

@@ -0,0 +1,48 @@
+#include "mt7620a_phicomm_k2x.dtsi"
+
+/ {
+	compatible = "phicomm,k2g", "ralink,mt7620a-soc";
+	model = "Phicomm K2G";
+};
+
+&partitions {
+	partition@50000 {
+		reg = <0x50000 0x50000>;
+		label = "permanent_config";
+		read-only;
+	};
+
+	partition@a0000 {
+		compatible = "denx,uimage";
+		reg = <0xa0000 0x760000>;
+		label = "firmware";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+};

target/linux/ramips/dts/mt7620a_phicomm_k2x.dtsi

@@ -0,0 +1,130 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		led-boot = &led_blue;
+		led-failsafe = &led_blue;
+		led-running = &led_blue;
+		led-upgrade = &led_blue;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_blue: blue {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		yellow {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_28: macaddr@28 {
+						reg = <0x28 0x6>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts

@@ -0,0 +1,144 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "phicomm,psg1208", "ralink,mt7620a-soc";
+	model = "Phicomm PSG1208";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+		led-running = &led_wps;
+		led-upgrade = &led_wps;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_wps: wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "white:wlan2g";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "spi refclk", "wled";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts

@@ -0,0 +1,14 @@
+#include "mt7620a_phicomm_k2x.dtsi"
+
+/ {
+	compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc";
+	model = "Phicomm PSG1218 rev.B";
+};
+
+&partitions {
+	partition@50000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x50000 0x7b0000>;
+	};
+};

target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts

@@ -0,0 +1,157 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
+	model = "Planex CS-QR10";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		s1 {
+			label = "reset";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		s2 {
+			label = "wps";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+};
+
+&i2s {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcm_i2s_pins>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&pcm {
+	status = "okay";
+};
+
+&gdma {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "spi refclk", "rgmii1";
+		function = "gpio";
+	};
+	wdt {
+		groups = "wdt";
+		function = "wdt refclk";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_planex_db-wrt01.dts

@@ -0,0 +1,117 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
+	model = "Planex DB-WRT01";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		s1 {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+							reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "spi refclk", "rgmii1";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_planex_mzk-750dhp.dts

@@ -0,0 +1,154 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
+	model = "Planex MZK-750DHP";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		s1 {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		s2 {
+			label = "wps";
+			gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "spi refclk", "rgmii1", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+	};
+};

target/linux/ramips/dts/mt7620a_planex_mzk-ex300np.dts

@@ -0,0 +1,157 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc";
+	model = "Planex MZK-EX300NP";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+		led-running = &led_wps;
+		led-upgrade = &led_wps;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wps: wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		rep {
+			label = "blue:rep";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi1 {
+			label = "blue:wifi1";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2 {
+			label = "blue:wifi2";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi3 {
+			label = "blue:wifi3";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x730000>;
+			};
+
+			partition@780000 {
+				label = "Udata";
+				reg = <0x780000 0x80000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "spi refclk", "rgmii1", "wled";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};

target/linux/ramips/dts/mt7620a_planex_mzk-ex750np.dts

@@ -0,0 +1,179 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
+	model = "Planex MZK-EX750NP";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "red:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		rep {
+			label = "blue:rep";
+			gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi1 {
+			label = "blue:wifi1";
+			gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi2 {
+			label = "blue:wifi2";
+			gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi3 {
+			label = "blue:wifi3";
+			gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x730000>;
+			};
+
+			partition@780000 {
+				label = "Udata";
+				reg = <0x780000 0x80000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "nd_sd", "rgmii2", "wled";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+	};
+};

target/linux/ramips/dts/mt7620a_ralink_mt7620a-evb.dts

@@ -0,0 +1,126 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ralink,mt7620a-evb", "ralink,mt7620a-soc";
+	model = "Ralink MT7620a + MT7610e evaluation board";
+
+	keys {
+		compatible = "gpio-keys";
+
+		s2 {
+			label = "S2";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		s3 {
+			label = "S3";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@4 {
+		status = "okay";
+		phy-mode = "rgmii";
+		phy-handle = <&phy4>;
+	};
+
+	port@5 {
+		status = "okay";
+		phy-mode = "rgmii";
+		phy-handle = <&phy5>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7530-evb.dts

@@ -0,0 +1,116 @@
+#include "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-mt7530-evb", "ralink,mt7620a-soc";
+	model = "Ralink MT7620a + MT7530 evaluation board";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+			phy-mode = "rgmii";
+		};
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+			phy-mode = "rgmii";
+		};
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy1f: ethernet-phy@1f {
+			reg = <0x1f>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <12>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7610e-evb.dts

@@ -0,0 +1,99 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ralink,mt7620a-mt7610e-evb", "ralink,mt7620a-soc";
+	model = "Ralink MT7620A evaluation board";
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_1>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ephy_pins>;
+
+	mediatek,portmap = "llllw";
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_8000>;
+		nvmem-cell-names = "eeprom";
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};

target/linux/ramips/dts/mt7620a_ralink_mt7620a-v22sg-evb.dts

@@ -0,0 +1,116 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ralink,mt7620a-v22sg-evb", "ralink,mt7620a-soc";
+	model = "Ralink MT7620a V22SG High Power evaluation board";
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		aoss {
+			label = "aoss";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	nand {
+		compatible = "mtk,mt7620-nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x20000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "factory";
+				reg = <0x60000 0x20000>;
+				read-only;
+			};
+
+			partition@80000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x80000 0x7f80000>;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "spi";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy4>;
+		phy-mode = "rgmii";
+	};
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_rostelecom_rt-fl-1.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_sercomm_cpj.dtsi"
+
+/ {
+	compatible = "rostelecom,rt-fl-1", "ralink,mt7620a-soc";
+	model = "Rostelecom RT-FL-1";
+};

target/linux/ramips/dts/mt7620a_rostelecom_s1010.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a_sercomm_cpj.dtsi"
+
+/ {
+	compatible = "rostelecom,s1010", "ralink,mt7620a-soc";
+	model = "Rostelecom S1010";
+};

target/linux/ramips/dts/mt7620a_sanlinking_d240.dts

@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ *  Copyright(c) 2017 Kristian Evensen <kristian.evensen@gmail.com>.
+ *  All rights reserved.
+ */
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "sanlinking,d240", "ralink,mt7620a-soc";
+	model = "Sanlinking Technologies D240";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		power_mpcie2 {
+			gpio-export,name = "power_mpcie2";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_mpcie1 {
+			gpio-export,name = "power_mpcie1";
+			gpio-export,output = <1>;
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		air {
+			label = "blue:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xfb0000>;
+			};
+		};
+	};
+};
+
+&sdhci {
+	status = "okay";
+	/* the pins function is already set during pinmux driver load */
+	/delete-property/ pinctrl-0;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "llllw";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	default {
+		groups = "i2c", "uartf", "wled", "spi refclk", "pa";
+		function = "gpio";
+	};
+
+	/*
+	 * The sd function of the nd_sd group configures two of the
+	 * groups pins as gpios. The pins are used as PCIe reset/power.
+	 * Due to the driver load order, the pins are configured way to
+	 * late if triggered by the sd-card driver.
+	 * To not introduce another kind of driver load order
+	 * dependency and configure the pins as early as possible,
+	 * means during pinmux driver load.
+	 */
+	gpio_sd {
+		groups = "nd_sd";
+		function = "sd";
+	};
+};
+
+&pcie {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_sercomm_cpj.dtsi

@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		label-mac-device = &ethernet;
+
+		led-boot = &status_green;
+		led-failsafe = &status_amber;
+		led-running = &status_green;
+		led-upgrade = &status_amber;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		button-1 {
+			label = "wps";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green: led-0 {
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		status_amber: led-1 {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <3>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <4>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			function-enumerator = <24>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+
+	virtual_flash {
+		compatible = "mtd-concat";
+
+		devices = <&fwconcat0 &fwconcat1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				compatible = "openwrt,uimage";
+				/* sercomm krnl hdr with fw chksums */
+				openwrt,offset = <0x100>;
+				label = "firmware";
+				reg = <0x0 0x0>;
+			};
+		};
+	};
+};
+
+&ethernet {
+	nvmem-cells = <&macaddr_label 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+/* mt7612 */
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		nvmem-cells = <&eeprom_factory_8000>, <&macaddr_label 6>;
+		nvmem-cell-names = "eeprom", "mac-address";
+
+		/* 5 GHz WLAN phy green led */
+		led {
+			led-sources = <2>;
+			led-active-low;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* whole flash */
+			partition@0_all {
+				label = "ALL";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "ftd_and_bootflag";
+				reg = <0x30000 0x20000>;
+			};
+
+			partition@50000 {
+				label = "Factory";
+				reg = <0x50000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_factory_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+				};
+			};
+
+			partition@60000 {
+				label = "SC Nvram(permanent data)";
+				reg = <0x60000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_label: macaddr@0 {
+						compatible = "mac-base";
+						reg = <0x0 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			fwconcat0: partition@70000 {
+				label = "Firmware";
+				reg = <0x70000 0x790000>;
+
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "Kernel";
+					reg = <0x0 0x200000>;
+				};
+
+				partition@200000 {
+					label = "RootFS";
+					reg = <0x200000 0x590000>;
+				};
+			};
+
+			fwconcat1: partition@800000 {
+				label = "Firmware2";
+				reg = <0x800000 0x790000>;
+
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "Kernel2";
+					reg = <0x0 0x200000>;
+				};
+
+				partition@200000 {
+					label = "RootFS2";
+					reg = <0x200000 0x590000>;
+				};
+			};
+
+			partition@f90000 {
+				label = "MAC IP";
+				reg = <0xf90000 0x10000>;
+				read-only;
+			};
+
+			partition@fa0000 {
+				label = "Critical Log";
+				reg = <0xfa0000 0x10000>;
+				read-only;
+			};
+
+			partition@fb000 {
+				label = "Critical Log Bak";
+				reg = <0xfb0000 0x10000>;
+				read-only;
+			};
+
+			partition@fc0000 {
+				label = "Xml Config";
+				reg = <0xfc0000 0x20000>;
+				read-only;
+			};
+
+			partition@fe0000 {
+				label = "Xml Config Bak";
+				reg = <0xfe0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "ephy", "rgmii1", "uartf", "wled";
+		function = "gpio";
+	};
+};
+
+/* mt7620 */
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>, <&macaddr_label 2>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_sercomm_na930.dts

@@ -0,0 +1,182 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "sercomm,na930", "ralink,mt7620a-soc";
+	model = "Sercomm NA930";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,57600";
+	};
+
+	nand {
+		compatible = "mtk,mt7620-nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "factory";
+				reg = <0x200000 0x40000>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "Config";
+				reg = <0x240000 0x400000>;
+				read-only;
+			};
+
+			partition@640000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x640000 0x1400000>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		zwave {
+			label = "zwave";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		zwave {
+			label = "blue:zwave";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		status {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		service {
+			label = "blue:service";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		telit {
+			gpio-export,name = "telit";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "rgmii2", "spi", "ephy";
+		function = "gpio";
+	};
+
+	uartf_gpio {
+		groups = "uartf";
+		function = "gpio uartf";
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	mediatek,portmap = "llllw";
+
+	port@4 {
+		status = "okay";
+		phy-handle = <&phy4>;
+		phy-mode = "rgmii";
+	};
+
+	port@5 {
+		status = "okay";
+		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
+		};
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
+		};
+	};
+};
+
+&gsw {
+	mediatek,port4-gmac;
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};

target/linux/ramips/dts/mt7620a_sitecom_wlr-4100-v1-002.dts

@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "sitecom,wlr-4100-v1-002", "ralink,mt7620a-soc";
+	model = "Sitecom WLR-4100 v1 002";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wifi {
+			label = "blue:wifi";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb-power {
+			gpio-export,name = "usb-power";
+			gpio-export,output = <1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					macaddr_factory_4: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0x790000>;
+			};
+
+			partition@7e0000 {
+				label = "backup";
+				reg = <0x7e0000 0x10000>;
+				read-only;
+			};
+
+			partition@7f0000 {
+				label = "storage";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	nvmem-cells = <&macaddr_factory_4>;
+	nvmem-cell-names = "mac-address";
+
+	port@5 {
+		status = "okay";
+
+		phy-mode = "rgmii";
+		mediatek,fixed-link = <1000 1 1 1>;
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+
+			qca,ar8327-initvals = <
+				0x04 0x06200000  /* PORT0 PAD MODE CTRL */
+				0x08 0x01000000  /* PORT5 PAD MODE CTRL  RX delay EN all ports 0, 5, 6 */
+				0x7c 0x0000007e  /* PORT0_STATUS */
+				0x94 0x00000000  /* PORT6_STATUS */
+			>;
+		};
+	};
+};
+
+&gsw {
+	mediatek,ephy-base = /bits/ 8 <8>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};
+
+&state_default {
+	gpio {
+		groups = "uartf", "i2c", "wled", "spi refclk";
+		function = "gpio";
+	};
+};

target/linux/ramips/dts/mt7620a_tplink_8m.dtsi

@@ -0,0 +1,144 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x20000 0x7a0000>;
+			};
+
+			partition@7c0000 {
+				label = "config";
+				reg = <0x7c0000 0x10000>;
+				read-only;
+			};
+
+			partition@7d0000 {
+				label = "rom";
+				reg = <0x7d0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_rom_f100: macaddr@f100 {
+						compatible = "mac-base";
+						reg = <0xf100 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@7e0000 {
+				label = "romfile";
+				reg = <0x7e0000 0x10000>;
+				read-only;
+			};
+
+			partition@7f0000 {
+				label = "radio";
+				reg = <0x7f0000 0x10000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_radio_0: eeprom@0 {
+						reg = <0x0 0x200>;
+					};
+
+					eeprom_radio_8000: eeprom@8000 {
+						reg = <0x8000 0x200>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+
+	nvmem-cells = <&macaddr_rom_f100 0>;
+	nvmem-cell-names = "mac-address";
+
+	mediatek,portmap = "wllll";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi: mt76@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ieee80211-freq-limit = <5000000 6000000>;
+	};
+};

target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts

@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_tplink_8m.dtsi"
+
+/ {
+	compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C2 v1";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+		led-running = &led_wps;
+		led-upgrade = &led_wps;
+	};
+
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led_wps: led-2 {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+
+	rtl8367rb {
+		compatible = "realtek,rtl8367b";
+		realtek,extif = <6 1 0 1 1 1 1 1 1 2>;
+		mii-bus = <&mdio0>;
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "wled", "ephy", "spi refclk";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio0: mdio-bus {
+		status = "okay";
+	};
+};
+
+
+&wmac {
+	nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts

@@ -0,0 +1,93 @@
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_tplink_8m.dtsi"
+
+/ {
+	compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C20 v1";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: led-1 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_WLAN_5GHZ;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_WLAN_2GHZ;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
+		function = "gpio";
+	};
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+
+	nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 (-2)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts

@@ -0,0 +1,70 @@
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_tplink_8m.dtsi"
+
+/ {
+	compatible = "tplink,archer-c20i", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C20i";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+		led-running = &led_wps;
+		led-upgrade = &led_wps;
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led_wps: led-2 {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
+		function = "gpio";
+	};
+};
+
+&wmac {
+	nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts

@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_tplink_8m.dtsi"
+
+/ {
+	compatible = "tplink,archer-c5-v4", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C5 v4";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_WLAN_2GHZ;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WLAN_5GHZ;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	rtl8367s {
+		compatible = "realtek,rtl8367b";
+		realtek,extif = <7 1 0 1 1 1 1 1 1 2>;
+		mii-bus = <&mdio0>;
+		phy-id = <29>;
+	};
+};
+
+&spi0 {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "ephy", "rgmii2";
+		function = "gpio";
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio0: mdio-bus {
+		status = "okay";
+		reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <10000>;
+	};
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+
+	nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 2>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};

target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts

@@ -0,0 +1,93 @@
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_tplink_8m.dtsi"
+
+/ {
+	compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C50 v1";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: led-1 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_WLAN_5GHZ;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_WLAN_2GHZ;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
+		function = "gpio";
+	};
+};
+
+&wmac {
+	pinctrl-names = "default", "pa_gpio";
+	pinctrl-0 = <&pa_pins>;
+	pinctrl-1 = <&pa_gpio_pins>;
+
+	nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 (-2)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
+	nvmem-cell-names = "eeprom", "mac-address";
+};