Initial commit

target/linux/ramips/rt288x/base-files/etc/board.d/01_leds

@@ -0,0 +1,24 @@
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case $board in
+airlink101,ar670w|\
+airlink101,ar725w)
+	ucidef_set_led_netdev "wifi_led" "wifi" "rt2800soc-phy0::radio" "wlan0"
+	;;
+belkin,f5d8235-v1)
+	ucidef_set_led_netdev "wifi_led" "wifi" "blue:wireless" "wlan0"
+	;;
+ralink,v11st-fe)
+	ucidef_set_led_netdev "wifi_led" "wifi" "rt2800pci-phy0::radio" "wlan0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ramips/rt288x/base-files/etc/board.d/02_network

@@ -0,0 +1,63 @@
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+	local board="$1"
+
+	case $board in
+	airlink101,ar670w|\
+	airlink101,ar725w)
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
+		;;
+	asus,rt-n15)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+	belkin,f5d8235-v1|\
+	buffalo,wzr-agl300nh|\
+	ralink,v11st-fe)
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+		;;
+	buffalo,wli-tx4-ag300n|\
+	dlink,dap-1522-a1)
+		ucidef_set_interface_lan "eth0"
+		;;
+	esac
+}
+
+ramips_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case $board in
+	airlink101,ar670w)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x2004)" 1)
+		;;
+	airlink101,ar725w|\
+	asus,rt-n15|\
+	belkin,f5d8235-v1|\
+	buffalo,wzr-agl300nh)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}