Files
openwrt-master/package/boot/uboot-mvebu/patches/101-net-mvpp2-fix-10GBase-R-support.patch
domenico c06fb25d1f
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
Initial commit
2025-06-24 14:35:53 +02:00

109 lines
3.3 KiB
Diff

From 0de5d031f36bca4f7c2686287eff1ef0f5412367 Mon Sep 17 00:00:00 2001
From: Sergey Sergeev <adron@yapic.net>
Date: Sun, 16 Jan 2022 17:19:35 +0100
Subject: [PATCH 2/3] net: mvpp2: fix 10GBase-R support
Due to the lack of XPCS register initialization code and partially incorrect
initialization of the MPCS network controler registers (tested on Mikrotik RB5009
in conjunction with MV88E6393X) the network does not work correctly.
The problem manifests itself as an arbitrary delay (0.4-4 sec) for the actual
data transmission to the network! Accordingly, an almost completely non-working
network for U-Boot is obtained. The code is backported from a similar Linux driver.
Signed-off-by: Sergey Sergeev <adron@yapic.net>
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
drivers/net/mvpp2.c | 73 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -3254,6 +3254,76 @@ static int gop_gpcs_reset(struct mvpp2_p
return 0;
}
+static void gop_pcs_reset_assert(struct mvpp2_port *port)
+{
+ u32 val;
+
+ if (port->priv->hw_version == MVPP21 || port->gop_id != 0)
+ return;
+
+ val = readl(port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ PCS_CLOCK_RESET);
+ val &= ~(MAC_CLK_RESET_MASK | RX_SD_CLK_RESET_MASK | TX_SD_CLK_RESET_MASK);
+ val |= CLK_DIV_PHASE_SET_MASK;
+ writel(val, port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ PCS_CLOCK_RESET);
+
+ val = readl(port->priv->xpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ MVPP22_XPCS_GLOBAL_CFG_0_REG);
+ val &= ~MVPP22_XPCS_PCSRESET;
+ writel(val, port->priv->xpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ MVPP22_XPCS_GLOBAL_CFG_0_REG);
+}
+
+static void gps_pcs_reset_deassert(struct mvpp2_port *port)
+{
+ u32 val;
+
+ if (port->priv->hw_version == MVPP21 || port->gop_id != 0)
+ return;
+
+ /* this code is only for case of PHY_INTERFACE_MODE_10GBASER! */
+ val = readl(port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ PCS_CLOCK_RESET);
+ val |= MAC_CLK_RESET_MASK | RX_SD_CLK_RESET_MASK |
+ TX_SD_CLK_RESET_MASK;
+ val &= ~CLK_DIV_PHASE_SET_MASK;
+ writel(val, port->priv->mpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ PCS_CLOCK_RESET);
+}
+
+/* Set the internal mux's to the required PCS in the PI */
+static int gop_xpcs_mode(struct mvpp2_port *port, int num_of_lanes)
+{
+ u32 val;
+ int lane;
+
+ switch (num_of_lanes) {
+ case 1:
+ lane = 0;
+ break;
+ case 2:
+ lane = 1;
+ break;
+ case 4:
+ lane = 2;
+ break;
+ default:
+ return -1;
+ }
+
+ /* configure XG MAC mode */
+ val = readl(port->priv->xpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ MVPP22_XPCS_GLOBAL_CFG_0_REG);
+ val &= ~MVPP22_XPCS_PCSMODE_MASK;
+ val &= ~MVPP22_XPCS_LANEACTIVE_MASK;
+ val |= (2 * lane) << MVPP22_XPCS_LANEACTIVE_OFFS;
+ writel(val, port->priv->xpcs_base + port->gop_id * MVPP22_PORT_OFFSET +
+ MVPP22_XPCS_GLOBAL_CFG_0_REG);
+
+ return 0;
+}
+
static int gop_mpcs_mode(struct mvpp2_port *port)
{
u32 val;
@@ -3396,7 +3466,10 @@ static int gop_port_init(struct mvpp2_po
num_of_act_lanes = 2;
mac_num = 0;
/* configure PCS */
+ gop_pcs_reset_assert(port);
+ gop_xpcs_mode(port, num_of_act_lanes);
gop_mpcs_mode(port);
+ gps_pcs_reset_deassert(port);
/* configure MAC */
gop_xlg_mac_mode_cfg(port, num_of_act_lanes);