c06fb25d1f
Some checks failed
Build Kernel / Build all affected Kernels (push) Has been cancelled
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Has been cancelled
Build Toolchains / Build Toolchains for each target (push) Has been cancelled
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Coverity scan build / Coverity x86/64 build (push) Has been cancelled
60 lines
2.4 KiB
Bash
Executable File
60 lines
2.4 KiB
Bash
Executable File
#!/bin/sh /etc/rc.common
|
|
|
|
START=98
|
|
|
|
boot() {
|
|
# configuring onboard temp/fan controller to run the fan on its own
|
|
# for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
|
|
|
|
case $(board_name) in
|
|
ctera,c200-v1)
|
|
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-004c/hwmon/hwmon0'
|
|
|
|
# It should be related to hdd temerature instead lm63 temp
|
|
echo 1 > "$path_to_hwmon/pwm1_enable"
|
|
echo 128 > "$path_to_hwmon/pwm1"
|
|
;;
|
|
iom,ix2-200)
|
|
path_to_hwmon='/sys/class/hwmon/hwmon0'
|
|
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
|
|
;;
|
|
netgear,readynas-duo-v2)
|
|
path_to_hwmon='/sys/class/hwmon/hwmon0'
|
|
echo 1200 > "$path_to_hwmon/fan1_target" # set target rpm
|
|
;;
|
|
seagate,blackarmor-nas220)
|
|
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
|
# adt7476 fan control chip. 3 temp sensors. Set to 1/4 speed at 35C and max speed at 48C.
|
|
echo 7 > "$path_to_hwmon/pwm1_auto_channels_temp"
|
|
echo 64 > "$path_to_hwmon/pwm1_auto_point1_pwm"
|
|
echo 255 > "$path_to_hwmon/pwm1_auto_point2_pwm"
|
|
echo 35000 > "$path_to_hwmon/temp1_auto_point1_temp"
|
|
echo 48000 > "$path_to_hwmon/temp1_auto_point2_temp"
|
|
echo 35000 > "$path_to_hwmon/temp2_auto_point1_temp"
|
|
echo 48000 > "$path_to_hwmon/temp2_auto_point2_temp"
|
|
echo 35000 > "$path_to_hwmon/temp3_auto_point1_temp"
|
|
echo 48000 > "$path_to_hwmon/temp3_auto_point2_temp"
|
|
echo 2 > "$path_to_hwmon/pwm1_enable"
|
|
;;
|
|
zyxel,nsa310b)
|
|
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
|
|
# use the max. value of (temp1) OR (temp2) OR (temp3) as an input
|
|
# for the PWM of the cooling fan
|
|
echo 123 > "$path_to_hwmon/pwm1_auto_channels"
|
|
# Temperature sensor #1 placed on mainboard
|
|
echo 30000 > "$path_to_hwmon/temp1_auto_temp_min"
|
|
echo 49600 > "$path_to_hwmon/temp1_auto_temp_max"
|
|
# Temperature sensor #2 placed on mainboard
|
|
# range: 0 to 127000 in steps of 1000 [millicelsius]
|
|
echo 30000 > "$path_to_hwmon/temp2_auto_temp_min"
|
|
# range: 0 to 127000 in steps of ???? [millicelsius]
|
|
echo 49600 > "$path_to_hwmon/temp2_auto_temp_max"
|
|
# Temperature sensor #3 placed close to a chipset
|
|
# range: 0 to 60000 in steps of 1000 [millicelsius]
|
|
echo 23000 > "$path_to_hwmon/temp3_auto_temp_min"
|
|
# pre-defined steps: 103000, 122000, 143300, 170000 in [millicelsius]
|
|
echo 103000 > "$path_to_hwmon/temp3_auto_temp_max"
|
|
;;
|
|
esac
|
|
}
|