domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: move small-flash Engenius boards to tiny

Browse Source 
This moves some of the Engenius boards from generic to tiny:

 - EAP350 v1
 - ECB350 v1
 - ENH202 v1

For these, factory.bin builds are already failing on master
branch because of the unique situation for these boards:

 - 8 MB flash
 - an extra "failsafe" image for recovery
 - TFTP does not work (barely possible with 600 MTU)
 - bootloader loads image from a longer flash offset
 - 1 eraseblock each needed for OKLI kernel loader and fake rootfs
 - using mtd-concat to make use of remaining space...

The manual alternative would be removing the failsafe partition.
However this comes with the risk of extremely difficult recovery
if a flash ever fails because TFTP on the bootloader is bugged.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[improve commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Michael Pratt
2021-01-01 16:48:52 -05:00
committed by Adrian Schmutzler
parent ecded5bf09
commit 0070650df4
9 changed files with 104 additions and 100 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ath79/tiny/base-files/etc/board.d/01_leds
View File

@@ -21,6 +21,14 @@ tplink,tl-wr941-v4)
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
;;
engenius,enh202-v1)
ucidef_set_led_switch "lan" "LAN" "amber:lan" "switch0" "0x10"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100"
;;
netgear,wnr1000-v2|\
netgear,wnr2000-v3)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "amber:wan" "eth0"

10
target/linux/ath79/tiny/base-files/etc/board.d/02_network
View File

@@ -28,6 +28,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
engenius,eap350-v1|\
engenius,ecb350-v1|\
pqi,air-pen|\
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
@@ -51,6 +53,11 @@ ath79_setup_interfaces()
tplink,tl-wr802n-v2)
ucidef_set_interface_lan "eth0"
;;
engenius,enh202-v1)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "4:lan:1"
;;
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-mr3420-v3|\
@@ -99,6 +106,9 @@ ath79_setup_macs()
wan_mac=$(mtd_get_mac_ascii "nvram" "wan_mac")
label_mac=$wan_mac
;;
engenius,enh202-v1)
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
;;
tplink,tl-wr941-v2|\
tplink,tl-wr941n-v7-cn)
base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)

3
target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@@ -10,6 +10,9 @@ case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
buffalo,whr-g301n|\
engenius,eap350-v1|\
engenius,ecb350-v1|\
engenius,enh202-v1|\
tplink,tl-wa701nd-v1|\
tplink,tl-wa730re-v1|\
tplink,tl-wa801nd-v1|\