domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

realtek: Add specific PHY polling options to support the Zyxel XGS1250/XGS1210

Browse Source 
Both the Aquantia AQR113c and the RTL8226 PHYs in the Zyxel XGS1250 and the
Zyxel XGS1210 require special polling configuration settings in the
RTL930X_SMI_10GPHY_POLLING_REGxx_CFG configuration registers. Set them.
Additionally, for RTL 1GBit phys set the RTL930X_SMI_PRVTE_POLLING_CTRL bits
in the poll mask.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
This commit is contained in:
Birger Koblitz
2022-01-30 06:20:25 +01:00
committed by Daniel Golle
parent 3cab11ad13
commit 08cf48c344
2 changed files with 101 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

104
target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
View File

@@ -199,6 +199,7 @@ struct rtl838x_eth_priv {
u32 sds_id[MAX_PORTS];
bool smi_bus_isc45[MAX_SMI_BUSSES];
bool phy_is_internal[MAX_PORTS];
phy_interface_t interfaces[MAX_PORTS];
};
extern int rtl838x_phy_init(struct rtl838x_eth_priv *priv);
@@ -1468,11 +1469,12 @@ static void rtl838x_mac_pcs_get_state(struct phylink_config *config,
struct rtl838x_eth_priv *priv = netdev_priv(dev);
int port = priv->cpu_port;
pr_debug("In %s\n", __func__);
pr_info("In %s\n", __func__);
state->link = priv->r->get_mac_link_sts(port) ? 1 : 0;
state->duplex = priv->r->get_mac_link_dup_sts(port) ? 1 : 0;
pr_info("%s link status is %d\n", __func__, state->link);
speed = priv->r->get_mac_link_spd_sts(port);
switch (speed) {
case 0:
@@ -1785,6 +1787,9 @@ static int rtl839x_mdio_reset(struct mii_bus *bus)
return 0;
}
u8 mac_type_bit[RTL930X_CPU_PORT] = {0, 0, 0, 0, 2, 2, 2, 2, 4, 4, 4, 4, 6, 6, 6, 6,
8, 8, 8, 8, 10, 10, 10, 10, 12, 15, 18, 21};
static int rtl930x_mdio_reset(struct mii_bus *bus)
{
int i;
@@ -1793,10 +1798,16 @@ static int rtl930x_mdio_reset(struct mii_bus *bus)
u32 c45_mask = 0;
u32 poll_sel[2];
u32 poll_ctrl = 0;
u32 private_poll_mask = 0;
u32 v;
bool uses_usxgmii = false; // For the Aquantia PHYs
bool uses_hisgmii = false; // For the RTL8221/8226
// Mapping of port to phy-addresses on an SMI bus
poll_sel[0] = poll_sel[1] = 0;
for (i = 0; i < 28; i++) {
for (i = 0; i < RTL930X_CPU_PORT; i++) {
if (priv->smi_bus[i] > 3)
continue;
pos = (i % 6) * 5;
sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos,
RTL930X_SMI_PORT0_5_ADDR + (i / 6) * 4);
@@ -1810,8 +1821,8 @@ static int rtl930x_mdio_reset(struct mii_bus *bus)
sw_w32(poll_sel[0], RTL930X_SMI_PORT0_15_POLLING_SEL);
sw_w32(poll_sel[1], RTL930X_SMI_PORT16_27_POLLING_SEL);
// Enable polling on the respective SMI busses
sw_w32_mask(0, poll_ctrl, RTL930X_SMI_GLB_CTRL);
// Disable POLL_SEL for any SMI bus with a normal PHY (not RTL8295R for SFP+)
sw_w32_mask(poll_ctrl, 0, RTL930X_SMI_GLB_CTRL);
// Configure which SMI busses are polled in c45 based on a c45 PHY being on that bus
for (i = 0; i < 4; i++)
@@ -1821,17 +1832,66 @@ static int rtl930x_mdio_reset(struct mii_bus *bus)
pr_info("c45_mask: %08x\n", c45_mask);
sw_w32_mask(0, c45_mask, RTL930X_SMI_GLB_CTRL);
// Ports 24 to 27 are 2.5 or 10Gig, set this type (1) or (0) for internal SerDes
for (i = 24; i < 28; i++) {
pos = (i - 24) * 3 + 12;
if (priv->phy_is_internal[i])
sw_w32_mask(0x7 << pos, 0 << pos, RTL930X_SMI_MAC_TYPE_CTRL);
else
sw_w32_mask(0x7 << pos, 1 << pos, RTL930X_SMI_MAC_TYPE_CTRL);
// Set the MAC type of each port according to the PHY-interface
// Values are FE: 2, GE: 3, XGE/2.5G: 0(SERDES) or 1(otherwise), SXGE: 0
v = 0;
for (i = 0; i < RTL930X_CPU_PORT; i++) {
switch (priv->interfaces[i]) {
case PHY_INTERFACE_MODE_10GBASER:
break; // Serdes: Value = 0
case PHY_INTERFACE_MODE_HSGMII:
private_poll_mask |= BIT(i);
// fallthrough
case PHY_INTERFACE_MODE_USXGMII:
v |= BIT(mac_type_bit[i]);
uses_usxgmii = true;
break;
case PHY_INTERFACE_MODE_QSGMII:
private_poll_mask |= BIT(i);
v |= 3 << mac_type_bit[i];
break;
default:
break;
}
}
sw_w32(v, RTL930X_SMI_MAC_TYPE_CTRL);
// Set the private polling mask for all Realtek PHYs (i.e. not the 10GBit Aquantia ones)
sw_w32(private_poll_mask, RTL930X_SMI_PRVTE_POLLING_CTRL);
/* The following magic values are found in the port configuration, they seem to
* define different ways of polling a PHY. The below is for the Aquantia PHYs of
* the XGS1250 and the RTL8226 of the XGS1210 */
if (uses_usxgmii) {
sw_w32(0x01010000, RTL930X_SMI_10GPHY_POLLING_REG0_CFG);
sw_w32(0x01E7C400, RTL930X_SMI_10GPHY_POLLING_REG9_CFG);
sw_w32(0x01E7E820, RTL930X_SMI_10GPHY_POLLING_REG10_CFG);
}
if (uses_hisgmii) {
sw_w32(0x011FA400, RTL930X_SMI_10GPHY_POLLING_REG0_CFG);
sw_w32(0x013FA412, RTL930X_SMI_10GPHY_POLLING_REG9_CFG);
sw_w32(0x017FA414, RTL930X_SMI_10GPHY_POLLING_REG10_CFG);
}
// TODO: Set up RTL9300_SMI_10GPHY_POLLING_SEL_0 for Aquantia PHYs on e.g. XGS 1250
pr_debug("%s: RTL930X_SMI_GLB_CTRL %08x\n", __func__,
sw_r32(RTL930X_SMI_GLB_CTRL));
pr_debug("%s: RTL930X_SMI_PORT0_15_POLLING_SEL %08x\n", __func__,
sw_r32(RTL930X_SMI_PORT0_15_POLLING_SEL));
pr_debug("%s: RTL930X_SMI_PORT16_27_POLLING_SEL %08x\n", __func__,
sw_r32(RTL930X_SMI_PORT16_27_POLLING_SEL));
pr_debug("%s: RTL930X_SMI_MAC_TYPE_CTRL %08x\n", __func__,
sw_r32(RTL930X_SMI_MAC_TYPE_CTRL));
pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG0_CFG %08x\n", __func__,
sw_r32(RTL930X_SMI_10GPHY_POLLING_REG0_CFG));
pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG9_CFG %08x\n", __func__,
sw_r32(RTL930X_SMI_10GPHY_POLLING_REG9_CFG));
pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG10_CFG %08x\n", __func__,
sw_r32(RTL930X_SMI_10GPHY_POLLING_REG10_CFG));
pr_debug("%s: RTL930X_SMI_PRVTE_POLLING_CTRL %08x\n", __func__,
sw_r32(RTL930X_SMI_PRVTE_POLLING_CTRL));
return 0;
}
@@ -2018,6 +2078,23 @@ static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv)
}
}
dn = of_find_compatible_node(NULL, NULL, "realtek,rtl83xx-switch");
if (!dn) {
dev_err(&priv->pdev->dev, "No RTL switch node in DTS\n");
return -ENODEV;
}
for_each_node_by_name(dn, "port") {
if (of_property_read_u32(dn, "reg", &pn))
continue;
pr_info("%s Looking at port %d\n", __func__, pn);
if (pn > priv->cpu_port)
continue;
if (of_get_phy_mode(dn, &priv->interfaces[pn]))
priv->interfaces[pn] = PHY_INTERFACE_MODE_NA;
pr_info("%s phy mode of port %d is %s\n", __func__, pn, phy_modes(priv->interfaces[pn]));
}
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%pOFn", mii_np);
ret = of_mdiobus_register(priv->mii_bus, mii_np);
@@ -2322,6 +2399,7 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev)
phylink = phylink_create(&priv->phylink_config, pdev->dev.fwnode,
phy_mode, &rtl838x_phylink_ops);
if (IS_ERR(phylink)) {
err = PTR_ERR(phylink);
goto err_free;

11
target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h
View File

@@ -194,6 +194,11 @@
#define RTL930X_SMI_PORT0_15_POLLING_SEL (0xCA08)
#define RTL930X_SMI_PORT16_27_POLLING_SEL (0xCA0C)
#define RTL930X_SMI_10GPHY_POLLING_REG0_CFG (0xCBB4)
#define RTL930X_SMI_10GPHY_POLLING_REG9_CFG (0xCBB8)
#define RTL930X_SMI_10GPHY_POLLING_REG10_CFG (0xCBBC)
#define RTL930X_SMI_PRVTE_POLLING_CTRL (0xCA10)
/* Registers of the internal Serdes of the 8390 */
#define RTL839X_SDS12_13_XSG0 (0xB800)
@@ -290,7 +295,11 @@ inline u32 rtl839x_get_mac_link_sts(int p)
inline u32 rtl930x_get_mac_link_sts(int port)
{
return (sw_r32(RTL930X_MAC_LINK_STS) & BIT(port));
u32 link = sw_r32(RTL930X_MAC_LINK_STS);
link = sw_r32(RTL930X_MAC_LINK_STS);
pr_info("%s link state is %08x\n", __func__, link);
return link & BIT(port);
}
inline u32 rtl931x_get_mac_link_sts(int p)