bmips: backport accepted pinctrl patches
These patches have been accepted for linux v5.13. External interrupts not supported for now. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas
@@ -21,14 +21,14 @@
|
|||||||
|
|
||||||
reset {
|
reset {
|
||||||
label = "reset";
|
label = "reset";
|
||||||
gpios = <&pinctrl 32 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_RESTART>;
|
linux,code = <KEY_RESTART>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|
||||||
wps {
|
wps {
|
||||||
label = "wps";
|
label = "wps";
|
||||||
gpios = <&pinctrl 33 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_WPS_BUTTON>;
|
linux,code = <KEY_WPS_BUTTON>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -142,110 +142,115 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio: syscon@10000080 {
|
gpio_cntl: syscon@10000080 {
|
||||||
compatible = "syscon", "simple-mfd";
|
compatible = "brcm,bcm6318-gpio-sysctl",
|
||||||
|
"syscon", "simple-mfd";
|
||||||
reg = <0x10000080 0x80>;
|
reg = <0x10000080 0x80>;
|
||||||
|
ranges = <0 0x10000080 0x80>;
|
||||||
native-endian;
|
native-endian;
|
||||||
|
|
||||||
pinctrl: pin-controller {
|
gpio: gpio@0 {
|
||||||
compatible = "brcm,bcm6318-pinctrl";
|
compatible = "brcm,bcm6318-gpio";
|
||||||
|
reg-names = "dirout", "dat";
|
||||||
|
reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
|
gpio-ranges = <&pinctrl 0 0 50>;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
interrupts-extended = <&ext_intc 0 0>,
|
pinctrl: pinctrl@18 {
|
||||||
<&ext_intc 1 0>;
|
compatible = "brcm,bcm6318-pinctrl";
|
||||||
interrupt-names = "gpio33",
|
reg = <0x18 0x10>, <0x54 0x18>;
|
||||||
"gpio34";
|
|
||||||
|
|
||||||
pinctrl_ephy0_spd_led: ephy0_spd_led {
|
pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
|
||||||
function = "ephy0_spd_led";
|
function = "ephy0_spd_led";
|
||||||
pins = "gpio0";
|
pins = "gpio0";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy1_spd_led: ephy1_spd_led {
|
pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
|
||||||
function = "ephy1_spd_led";
|
function = "ephy1_spd_led";
|
||||||
pins = "gpio1";
|
pins = "gpio1";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy2_spd_led: ephy2_spd_led {
|
pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
|
||||||
function = "ephy2_spd_led";
|
function = "ephy2_spd_led";
|
||||||
pins = "gpio2";
|
pins = "gpio2";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy3_spd_led: ephy3_spd_led {
|
pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
|
||||||
function = "ephy3_spd_led";
|
function = "ephy3_spd_led";
|
||||||
pins = "gpio3";
|
pins = "gpio3";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy0_act_led: ephy0_act_led {
|
pinctrl_ephy0_act_led: ephy0_act_led-pins {
|
||||||
function = "ephy0_act_led";
|
function = "ephy0_act_led";
|
||||||
pins = "gpio4";
|
pins = "gpio4";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy1_act_led: ephy1_act_led {
|
pinctrl_ephy1_act_led: ephy1_act_led-pins {
|
||||||
function = "ephy1_act_led";
|
function = "ephy1_act_led";
|
||||||
pins = "gpio5";
|
pins = "gpio5";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy2_act_led: ephy2_act_led {
|
pinctrl_ephy2_act_led: ephy2_act_led-pins {
|
||||||
function = "ephy2_act_led";
|
function = "ephy2_act_led";
|
||||||
pins = "gpio6";
|
pins = "gpio6";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy3_act_led: ephy3_act_led {
|
pinctrl_ephy3_act_led: ephy3_act_led-pins {
|
||||||
function = "ephy3_act_led";
|
function = "ephy3_act_led";
|
||||||
pins = "gpio7";
|
pins = "gpio7";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led: serial_led {
|
pinctrl_serial_led: serial_led-pins {
|
||||||
pinctrl_serial_led_data: serial_led_data {
|
pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
function = "serial_led_data";
|
function = "serial_led_data";
|
||||||
pins = "gpio6";
|
pins = "gpio6";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led_clk: serial_led_clk {
|
pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
function = "serial_led_clk";
|
function = "serial_led_clk";
|
||||||
pins = "gpio7";
|
pins = "gpio7";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_inet_act_led: inet_act_led {
|
pinctrl_inet_act_led: inet_act_led-pins {
|
||||||
function = "inet_act_led";
|
function = "inet_act_led";
|
||||||
pins = "gpio8";
|
pins = "gpio8";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_inet_fail_led: inet_fail_led {
|
pinctrl_inet_fail_led: inet_fail_led-pins {
|
||||||
function = "inet_fail_led";
|
function = "inet_fail_led";
|
||||||
pins = "gpio9";
|
pins = "gpio9";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_dsl_led: dsl_led {
|
pinctrl_dsl_led: dsl_led-pins {
|
||||||
function = "dsl_led";
|
function = "dsl_led";
|
||||||
pins = "gpio10";
|
pins = "gpio10";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_post_fail_led: post_fail_led {
|
pinctrl_post_fail_led: post_fail_led-pins {
|
||||||
function = "post_fail_led";
|
function = "post_fail_led";
|
||||||
pins = "gpio11";
|
pins = "gpio11";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_wlan_wps_led: wlan_wps_led {
|
pinctrl_wlan_wps_led: wlan_wps_led-pins {
|
||||||
function = "wlan_wps_led";
|
function = "wlan_wps_led";
|
||||||
pins = "gpio12";
|
pins = "gpio12";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_usb_pwron: usb_pwron {
|
pinctrl_usb_pwron: usb_pwron-pins {
|
||||||
function = "usb_pwron";
|
function = "usb_pwron";
|
||||||
pins = "gpio13";
|
pins = "gpio13";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_usb_device_led: usb_device_led {
|
pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
function = "usb_device_led";
|
function = "usb_device_led";
|
||||||
pins = "gpio13";
|
pins = "gpio13";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_usb_active: usb_active {
|
pinctrl_usb_active: usb_active-pins {
|
||||||
function = "usb_active";
|
function = "usb_active";
|
||||||
pins = "gpio40";
|
pins = "gpio40";
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -153,131 +153,132 @@
|
|||||||
#reset-cells = <1>;
|
#reset-cells = <1>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio: syscon@100000c0 {
|
gpio_cntl: syscon@100000c0 {
|
||||||
compatible = "syscon", "simple-mfd";
|
compatible = "brcm,bcm63268-gpio-sysctl",
|
||||||
|
"syscon", "simple-mfd";
|
||||||
reg = <0x100000c0 0x80>;
|
reg = <0x100000c0 0x80>;
|
||||||
|
ranges = <0 0x100000c0 0x80>;
|
||||||
native-endian;
|
native-endian;
|
||||||
|
|
||||||
pinctrl: pin-controller {
|
gpio: gpio@0 {
|
||||||
compatible = "brcm,bcm63268-pinctrl";
|
compatible = "brcm,bcm63268-gpio";
|
||||||
|
reg-names = "dirout", "dat";
|
||||||
|
reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
|
gpio-ranges = <&pinctrl 0 0 52>;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
interrupts-extended = <&ext_intc 0 0>,
|
pinctrl: pinctrl@10 {
|
||||||
<&ext_intc 1 0>,
|
compatible = "brcm,bcm63268-pinctrl";
|
||||||
<&ext_intc 2 0>,
|
reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
|
||||||
<&ext_intc 3 0>;
|
|
||||||
interrupt-names = "gpio32",
|
|
||||||
"gpio33",
|
|
||||||
"gpio34",
|
|
||||||
"gpio35";
|
|
||||||
|
|
||||||
pinctrl_serial_led: serial_led {
|
pinctrl_serial_led: serial_led-pins {
|
||||||
pinctrl_serial_led_clk: serial_led_clk {
|
pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
function = "serial_led_clk";
|
function = "serial_led_clk";
|
||||||
pins = "gpio0";
|
pins = "gpio0";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led_data: serial_led_data {
|
pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
function = "serial_led_data";
|
function = "serial_led_data";
|
||||||
pins = "gpio1";
|
pins = "gpio1";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_hsspi_cs4: hsspi_cs4 {
|
pinctrl_hsspi_cs4: hsspi_cs4-pins {
|
||||||
function = "hsspi_cs4";
|
function = "hsspi_cs4";
|
||||||
pins = "gpio16";
|
pins = "gpio16";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_hsspi_cs5: hsspi_cs5 {
|
pinctrl_hsspi_cs5: hsspi_cs5-pins {
|
||||||
function = "hsspi_cs5";
|
function = "hsspi_cs5";
|
||||||
pins = "gpio17";
|
pins = "gpio17";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_hsspi_cs6: hsspi_cs6 {
|
pinctrl_hsspi_cs6: hsspi_cs6-pins {
|
||||||
function = "hsspi_cs6";
|
function = "hsspi_cs6";
|
||||||
pins = "gpio8";
|
pins = "gpio8";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_hsspi_cs7: hsspi_cs7 {
|
pinctrl_hsspi_cs7: hsspi_cs7-pins {
|
||||||
function = "hsspi_cs7";
|
function = "hsspi_cs7";
|
||||||
pins = "gpio9";
|
pins = "gpio9";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_adsl_spi: adsl_spi {
|
pinctrl_adsl_spi: adsl_spi {
|
||||||
pinctrl_adsl_spi_miso: adsl_spi_miso {
|
pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
||||||
function = "adsl_spi_miso";
|
function = "adsl_spi_miso";
|
||||||
pins = "gpio18";
|
pins = "gpio18";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_adsl_spi_mosi: adsl_spi_mosi {
|
pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
||||||
function = "adsl_spi_mosi";
|
function = "adsl_spi_mosi";
|
||||||
pins = "gpio19";
|
pins = "gpio19";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_vreq_clk: vreq_clk {
|
pinctrl_vreq_clk: vreq_clk-pins {
|
||||||
function = "vreq_clk";
|
function = "vreq_clk";
|
||||||
pins = "gpio22";
|
pins = "gpio22";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pcie_clkreq_b: pcie_clkreq_b {
|
pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
|
||||||
function = "pcie_clkreq_b";
|
function = "pcie_clkreq_b";
|
||||||
pins = "gpio23";
|
pins = "gpio23";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led_clk: robosw_led_clk {
|
pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
function = "robosw_led_clk";
|
function = "robosw_led_clk";
|
||||||
pins = "gpio30";
|
pins = "gpio30";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led_data: robosw_led_data {
|
pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
function = "robosw_led_data";
|
function = "robosw_led_data";
|
||||||
pins = "gpio31";
|
pins = "gpio31";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_nand: nand {
|
pinctrl_nand: nand-pins {
|
||||||
function = "nand";
|
function = "nand";
|
||||||
group = "nand_grp";
|
group = "nand_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_gpio35_alt: gpio35_alt {
|
pinctrl_gpio35_alt: gpio35_alt-pins {
|
||||||
function = "gpio35_alt";
|
function = "gpio35_alt";
|
||||||
pin = "gpio35";
|
pin = "gpio35";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_dectpd: dectpd {
|
pinctrl_dectpd: dectpd-pins {
|
||||||
function = "dectpd";
|
function = "dectpd";
|
||||||
group = "dectpd_grp";
|
group = "dectpd_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
|
pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
|
||||||
function = "vdsl_phy_override_0";
|
function = "vdsl_phy_override_0";
|
||||||
group = "vdsl_phy_override_0_grp";
|
group = "vdsl_phy_override_0_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
|
pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
|
||||||
function = "vdsl_phy_override_1";
|
function = "vdsl_phy_override_1";
|
||||||
group = "vdsl_phy_override_1_grp";
|
group = "vdsl_phy_override_1_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
|
pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
|
||||||
function = "vdsl_phy_override_2";
|
function = "vdsl_phy_override_2";
|
||||||
group = "vdsl_phy_override_2_grp";
|
group = "vdsl_phy_override_2_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
|
pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
|
||||||
function = "vdsl_phy_override_3";
|
function = "vdsl_phy_override_3";
|
||||||
group = "vdsl_phy_override_3_grp";
|
group = "vdsl_phy_override_3_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_dsl_gpio8: dsl_gpio8 {
|
pinctrl_dsl_gpio8: dsl_gpio8-pins {
|
||||||
function = "dsl_gpio8";
|
function = "dsl_gpio8";
|
||||||
group = "dsl_gpio8";
|
group = "dsl_gpio8";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_dsl_gpio9: dsl_gpio9 {
|
pinctrl_dsl_gpio9: dsl_gpio9-pins {
|
||||||
function = "dsl_gpio9";
|
function = "dsl_gpio9";
|
||||||
group = "dsl_gpio9";
|
group = "dsl_gpio9";
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -19,7 +19,7 @@
|
|||||||
|
|
||||||
reset {
|
reset {
|
||||||
label = "reset";
|
label = "reset";
|
||||||
gpios = <&pinctrl 23 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_RESTART>;
|
linux,code = <KEY_RESTART>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -145,99 +145,100 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio: syscon@10000080 {
|
gpio_cntl: syscon@10000080 {
|
||||||
compatible = "syscon", "simple-mfd";
|
compatible = "brcm,bcm6328-gpio-sysctl",
|
||||||
|
"syscon", "simple-mfd";
|
||||||
reg = <0x10000080 0x80>;
|
reg = <0x10000080 0x80>;
|
||||||
|
ranges = <0 0x10000080 0x80>;
|
||||||
native-endian;
|
native-endian;
|
||||||
|
|
||||||
pinctrl: pin-controller {
|
gpio: gpio@0 {
|
||||||
compatible = "brcm,bcm6328-pinctrl";
|
compatible = "brcm,bcm6328-gpio";
|
||||||
|
reg-names = "dirout", "dat";
|
||||||
|
reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
|
gpio-ranges = <&pinctrl 0 0 32>;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
interrupts-extended = <&ext_intc 3 0>,
|
pinctrl: pinctrl@18 {
|
||||||
<&ext_intc 2 0>,
|
compatible = "brcm,bcm6328-pinctrl";
|
||||||
<&ext_intc 1 0>,
|
reg = <0x18 0x10>;
|
||||||
<&ext_intc 0 0>;
|
|
||||||
interrupt-names = "gpio12",
|
|
||||||
"gpio15",
|
|
||||||
"gpio23",
|
|
||||||
"gpio24";
|
|
||||||
|
|
||||||
pinctrl_serial_led: serial_led {
|
pinctrl_serial_led: serial_led-pins {
|
||||||
pinctrl_serial_led_data: serial_led_data {
|
pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
function = "serial_led_data";
|
function = "serial_led_data";
|
||||||
pins = "gpio6";
|
pins = "gpio6";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led_clk: serial_led_clk {
|
pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
function = "serial_led_clk";
|
function = "serial_led_clk";
|
||||||
pins = "gpio7";
|
pins = "gpio7";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_inet_act_led: inet_act_led {
|
pinctrl_inet_act_led: inet_act_led-pins {
|
||||||
function = "inet_act_led";
|
function = "inet_act_led";
|
||||||
pins = "gpio11";
|
pins = "gpio11";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pcie_clkreq: pcie_clkreq {
|
pinctrl_pcie_clkreq: pcie_clkreq-pins {
|
||||||
function = "pcie_clkreq";
|
function = "pcie_clkreq";
|
||||||
pins = "gpio16";
|
pins = "gpio16";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy0_spd_led: ephy0_spd_led {
|
pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
|
||||||
function = "led";
|
function = "led";
|
||||||
pins = "gpio17";
|
pins = "gpio17";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy1_spd_led: ephy1_spd_led {
|
pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
|
||||||
function = "led";
|
function = "led";
|
||||||
pins = "gpio18";
|
pins = "gpio18";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy2_spd_led: ephy2_spd_led {
|
pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
|
||||||
function = "led";
|
function = "led";
|
||||||
pins = "gpio19";
|
pins = "gpio19";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy3_spd_led: ephy3_spd_led {
|
pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
|
||||||
function = "led";
|
function = "led";
|
||||||
pins = "gpio20";
|
pins = "gpio20";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy0_act_led: ephy0_act_led {
|
pinctrl_ephy0_act_led: ephy0_act_led-pins {
|
||||||
function = "ephy0_act_led";
|
function = "ephy0_act_led";
|
||||||
pins = "gpio25";
|
pins = "gpio25";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy1_act_led: ephy1_act_led {
|
pinctrl_ephy1_act_led: ephy1_act_led-pins {
|
||||||
function = "ephy1_act_led";
|
function = "ephy1_act_led";
|
||||||
pins = "gpio26";
|
pins = "gpio26";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy2_act_led: ephy2_act_led {
|
pinctrl_ephy2_act_led: ephy2_act_led-pins {
|
||||||
function = "ephy2_act_led";
|
function = "ephy2_act_led";
|
||||||
pins = "gpio27";
|
pins = "gpio27";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy3_act_led: ephy3_act_led {
|
pinctrl_ephy3_act_led: ephy3_act_led-pins {
|
||||||
function = "ephy3_act_led";
|
function = "ephy3_act_led";
|
||||||
pins = "gpio28";
|
pins = "gpio28";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_hsspi_cs1: hsspi_cs1 {
|
pinctrl_hsspi_cs1: hsspi_cs1-pins {
|
||||||
function = "hsspi_cs1";
|
function = "hsspi_cs1";
|
||||||
pins = "hsspi_cs1";
|
pins = "hsspi_cs1";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_usb_port1_device: usb_port1_device {
|
pinctrl_usb_port1_device: usb_port1_device-pins {
|
||||||
function = "usb_device_port";
|
function = "usb_device_port";
|
||||||
pins = "usb_port1";
|
pins = "usb_port1";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_usb_port1_host: usb_port1_host {
|
pinctrl_usb_port1_host: usb_port1_host-pins {
|
||||||
function = "usb_host_port";
|
function = "usb_host_port";
|
||||||
pins = "usb_port1";
|
pins = "usb_port1";
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -23,28 +23,28 @@
|
|||||||
|
|
||||||
help {
|
help {
|
||||||
label = "help";
|
label = "help";
|
||||||
gpios = <&pinctrl 8 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_HELP>;
|
linux,code = <KEY_HELP>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|
||||||
wlan {
|
wlan {
|
||||||
label = "wlan";
|
label = "wlan";
|
||||||
gpios = <&pinctrl 9 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_WLAN>;
|
linux,code = <KEY_WLAN>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|
||||||
restart {
|
restart {
|
||||||
label = "restart";
|
label = "restart";
|
||||||
gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_RESTART>;
|
linux,code = <KEY_RESTART>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|
||||||
reset {
|
reset {
|
||||||
label = "reset";
|
label = "reset";
|
||||||
gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_CONFIG>;
|
linux,code = <KEY_CONFIG>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
@@ -55,68 +55,68 @@
|
|||||||
|
|
||||||
led@0 {
|
led@0 {
|
||||||
label = "red:message";
|
label = "red:message";
|
||||||
gpios = <&pinctrl 0 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
hspa_red: led@1 {
|
hspa_red: led@1 {
|
||||||
label = "red:hspa";
|
label = "red:hspa";
|
||||||
gpios = <&pinctrl 1 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
dsl_red: led@2 {
|
dsl_red: led@2 {
|
||||||
label = "red:dsl";
|
label = "red:dsl";
|
||||||
gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
power_red: led@3 {
|
power_red: led@3 {
|
||||||
label = "red:power";
|
label = "red:power";
|
||||||
gpios = <&pinctrl 3 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@6 {
|
led@6 {
|
||||||
label = "all";
|
label = "all";
|
||||||
gpios = <&pinctrl 6 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||||
default-state = "on";
|
default-state = "on";
|
||||||
};
|
};
|
||||||
|
|
||||||
led@12 {
|
led@12 {
|
||||||
label = "green:lan1";
|
label = "green:lan1";
|
||||||
gpios = <&pinctrl 12 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@13 {
|
led@13 {
|
||||||
label = "red:lan1";
|
label = "red:lan1";
|
||||||
gpios = <&pinctrl 13 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@15 {
|
led@15 {
|
||||||
label = "green:lan2";
|
label = "green:lan2";
|
||||||
gpios = <&pinctrl 15 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@22 {
|
led@22 {
|
||||||
label = "red:lan2";
|
label = "red:lan2";
|
||||||
gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@23 {
|
led@23 {
|
||||||
label = "green:lan3";
|
label = "green:lan3";
|
||||||
gpios = <&pinctrl 23 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@26 {
|
led@26 {
|
||||||
label = "red:lan3";
|
label = "red:lan3";
|
||||||
gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@27 {
|
led@27 {
|
||||||
label = "green:lan4";
|
label = "green:lan4";
|
||||||
gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@28 {
|
led@28 {
|
||||||
label = "red:lan4";
|
label = "red:lan4";
|
||||||
gpios = <&pinctrl 28 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|||||||
@@ -157,71 +157,68 @@
|
|||||||
timeout-sec = <30>;
|
timeout-sec = <30>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio: syscon@fffe0080 {
|
gpio_cntl: syscon@fffe0080 {
|
||||||
compatible = "syscon", "simple-mfd";
|
compatible = "brcm,bcm6358-gpio-sysctl",
|
||||||
|
"syscon", "simple-mfd";
|
||||||
reg = <0xfffe0080 0x50>;
|
reg = <0xfffe0080 0x50>;
|
||||||
|
ranges = <0 0xfffe0080 0x80>;
|
||||||
native-endian;
|
native-endian;
|
||||||
|
|
||||||
pinctrl: pin-controller {
|
gpio: gpio@0 {
|
||||||
compatible = "brcm,bcm6358-pinctrl";
|
compatible = "brcm,bcm6358-gpio";
|
||||||
|
reg-names = "dirout", "dat";
|
||||||
|
reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
|
gpio-ranges = <&pinctrl 0 0 40>;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
interrupts-extended = <&ext_intc1 0 0>,
|
pinctrl: pinctrl@18 {
|
||||||
<&ext_intc1 1 0>,
|
compatible = "brcm,bcm6358-pinctrl";
|
||||||
<&ext_intc0 0 0>,
|
reg = <0x18 0x4>;
|
||||||
<&ext_intc0 1 0>,
|
|
||||||
<&ext_intc0 2 0>,
|
|
||||||
<&ext_intc0 3 0>;
|
|
||||||
interrupt-names = "gpio32",
|
|
||||||
"gpio33",
|
|
||||||
"gpio34",
|
|
||||||
"gpio35",
|
|
||||||
"gpio36",
|
|
||||||
"gpio37";
|
|
||||||
|
|
||||||
pinctrl_ebi_cs: ebi_cs {
|
pinctrl_ebi_cs: ebi_cs-pins {
|
||||||
function = "ebi_cs";
|
function = "ebi_cs";
|
||||||
groups = "ebi_cs_grp";
|
groups = "ebi_cs_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_uart1: uart1 {
|
pinctrl_uart1: uart1-pins {
|
||||||
function = "uart1";
|
function = "uart1";
|
||||||
groups = "uart1_grp";
|
groups = "uart1_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led: serial_led {
|
pinctrl_serial_led: serial_led-pins {
|
||||||
function = "serial_led";
|
function = "serial_led";
|
||||||
groups = "serial_led_grp";
|
groups = "serial_led_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_legacy_led: legacy_led {
|
pinctrl_legacy_led: legacy_led-pins {
|
||||||
function = "legacy_led";
|
function = "legacy_led";
|
||||||
groups = "legacy_led_grp";
|
groups = "legacy_led_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_led: led {
|
pinctrl_led: led-pins {
|
||||||
function = "led";
|
function = "led";
|
||||||
groups = "led_grp";
|
groups = "led_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs_23: spi_cs {
|
pinctrl_spi_cs_23: spi_cs-pins {
|
||||||
function = "spi_cs";
|
function = "spi_cs";
|
||||||
groups = "spi_cs_grp";
|
groups = "spi_cs_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_utopia: utopia {
|
pinctrl_utopia: utopia-pins {
|
||||||
function = "utopia";
|
function = "utopia";
|
||||||
groups = "utopia_grp";
|
groups = "utopia_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pwm_syn_clk: pwm_syn_clk {
|
pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
|
||||||
function = "pwm_syn_clk";
|
function = "pwm_syn_clk";
|
||||||
groups = "pwm_syn_clk_grp";
|
groups = "pwm_syn_clk_grp";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_sys_irq: sys_irq {
|
pinctrl_sys_irq: sys_irq-pins {
|
||||||
function = "sys_irq";
|
function = "sys_irq";
|
||||||
groups = "sys_irq_grp";
|
groups = "sys_irq_grp";
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -23,21 +23,21 @@
|
|||||||
|
|
||||||
wlan {
|
wlan {
|
||||||
label = "wlan";
|
label = "wlan";
|
||||||
gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_WLAN>;
|
linux,code = <KEY_WLAN>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|
||||||
wps {
|
wps {
|
||||||
label = "wps";
|
label = "wps";
|
||||||
gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_WPS_BUTTON>;
|
linux,code = <KEY_WPS_BUTTON>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
|
|
||||||
reset {
|
reset {
|
||||||
label = "reset";
|
label = "reset";
|
||||||
gpios = <&pinctrl 31 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_RESTART>;
|
linux,code = <KEY_RESTART>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
@@ -48,12 +48,12 @@
|
|||||||
|
|
||||||
led@28 {
|
led@28 {
|
||||||
label = "green:dsl";
|
label = "green:dsl";
|
||||||
gpios = <&pinctrl 28 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@34 {
|
led@34 {
|
||||||
label = "red:power";
|
label = "red:power";
|
||||||
gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -146,173 +146,174 @@
|
|||||||
timeout-sec = <30>;
|
timeout-sec = <30>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio: syscon@10000080 {
|
gpio_cntl: syscon@10000080 {
|
||||||
compatible = "syscon", "simple-mfd";
|
compatible = "brcm,bcm6362-gpio-sysctl",
|
||||||
|
"syscon", "simple-mfd";
|
||||||
reg = <0x10000080 0x80>;
|
reg = <0x10000080 0x80>;
|
||||||
|
ranges = <0 0x10000080 0x80>;
|
||||||
native-endian;
|
native-endian;
|
||||||
|
|
||||||
pinctrl: pin-controller {
|
gpio: gpio@0 {
|
||||||
compatible = "brcm,bcm6362-pinctrl";
|
compatible = "brcm,bcm6362-gpio";
|
||||||
|
reg-names = "dirout", "dat";
|
||||||
|
reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
|
gpio-ranges = <&pinctrl 0 0 48>;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
interrupts-extended = <&ext_intc 0 0>,
|
pinctrl: pinctrl@18 {
|
||||||
<&ext_intc 1 0>,
|
compatible = "brcm,bcm6362-pinctrl";
|
||||||
<&ext_intc 2 0>,
|
reg = <0x18 0x10>, <0x38 0x4>;
|
||||||
<&ext_intc 3 0>;
|
|
||||||
interrupt-names = "gpio24",
|
|
||||||
"gpio25",
|
|
||||||
"gpio26",
|
|
||||||
"gpio27";
|
|
||||||
|
|
||||||
pinctrl_usb_device_led: usb_device_led {
|
pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
function = "usb_device_led";
|
function = "usb_device_led";
|
||||||
pins = "gpio0";
|
pins = "gpio0";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_sys_irq: sys_irq {
|
pinctrl_sys_irq: sys_irq-pins {
|
||||||
function = "sys_irq";
|
function = "sys_irq";
|
||||||
pins = "gpio1";
|
pins = "gpio1";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led: serial_led {
|
pinctrl_serial_led: serial_led-pins {
|
||||||
pinctrl_serial_led_clk: serial_led_clk {
|
pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
function = "serial_led_clk";
|
function = "serial_led_clk";
|
||||||
pins = "gpio2";
|
pins = "gpio2";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led_data: serial_led_data {
|
pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
function = "serial_led_data";
|
function = "serial_led_data";
|
||||||
pins = "gpio3";
|
pins = "gpio3";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led_data: robosw_led_data {
|
pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
function = "robosw_led_data";
|
function = "robosw_led_data";
|
||||||
pins = "gpio4";
|
pins = "gpio4";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led_clk: robosw_led_clk {
|
pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
function = "robosw_led_clk";
|
function = "robosw_led_clk";
|
||||||
pins = "gpio5";
|
pins = "gpio5";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led0: robosw_led0 {
|
pinctrl_robosw_led0: robosw_led0-pins {
|
||||||
function = "robosw_led0";
|
function = "robosw_led0";
|
||||||
pins = "gpio6";
|
pins = "gpio6";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led1: robosw_led1 {
|
pinctrl_robosw_led1: robosw_led1-pins {
|
||||||
function = "robosw_led1";
|
function = "robosw_led1";
|
||||||
pins = "gpio7";
|
pins = "gpio7";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_inet_led: inet_led {
|
pinctrl_inet_led: inet_led-pins {
|
||||||
function = "inet_led";
|
function = "inet_led";
|
||||||
pins = "gpio8";
|
pins = "gpio8";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs2: spi_cs2 {
|
pinctrl_spi_cs2: spi_cs2-pins {
|
||||||
function = "spi_cs2";
|
function = "spi_cs2";
|
||||||
pins = "gpio9";
|
pins = "gpio9";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs3: spi_cs3 {
|
pinctrl_spi_cs3: spi_cs3-pins {
|
||||||
function = "spi_cs3";
|
function = "spi_cs3";
|
||||||
pins = "gpio10";
|
pins = "gpio10";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ntr_pulse: ntr_pulse {
|
pinctrl_ntr_pulse: ntr_pulse-pins {
|
||||||
function = "ntr_pulse";
|
function = "ntr_pulse";
|
||||||
pins = "gpio11";
|
pins = "gpio11";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_uart1_scts: uart1_scts {
|
pinctrl_uart1_scts: uart1_scts-pins {
|
||||||
function = "uart1_scts";
|
function = "uart1_scts";
|
||||||
pins = "gpio12";
|
pins = "gpio12";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_uart1_srts: uart1_srts {
|
pinctrl_uart1_srts: uart1_srts-pins {
|
||||||
function = "uart1_srts";
|
function = "uart1_srts";
|
||||||
pins = "gpio13";
|
pins = "gpio13";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_uart1: uart1 {
|
pinctrl_uart1: uart1-pins {
|
||||||
pinctrl_uart1_sdin: uart1_sdin {
|
pinctrl_uart1_sdin: uart1_sdin-pins {
|
||||||
function = "uart1_sdin";
|
function = "uart1_sdin";
|
||||||
pins = "gpio14";
|
pins = "gpio14";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_uart1_sdout: uart1_sdout {
|
pinctrl_uart1_sdout: uart1_sdout-pins {
|
||||||
function = "uart1_sdout";
|
function = "uart1_sdout";
|
||||||
pins = "gpio15";
|
pins = "gpio15";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_adsl_spi: adsl_spi {
|
pinctrl_adsl_spi: adsl_spi-pins {
|
||||||
pinctrl_adsl_spi_miso: adsl_spi_miso {
|
pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
||||||
function = "adsl_spi_miso";
|
function = "adsl_spi_miso";
|
||||||
pins = "gpio16";
|
pins = "gpio16";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_adsl_spi_mosi: adsl_spi_mosi {
|
pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
||||||
function = "adsl_spi_mosi";
|
function = "adsl_spi_mosi";
|
||||||
pins = "gpio17";
|
pins = "gpio17";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_adsl_spi_clk: adsl_spi_clk {
|
pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
|
||||||
function = "adsl_spi_clk";
|
function = "adsl_spi_clk";
|
||||||
pins = "gpio18";
|
pins = "gpio18";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_adsl_spi_cs: adsl_spi_cs {
|
pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
|
||||||
function = "adsl_spi_cs";
|
function = "adsl_spi_cs";
|
||||||
pins = "gpio19";
|
pins = "gpio19";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy0_led: ephy0_led {
|
pinctrl_ephy0_led: ephy0_led-pins {
|
||||||
function = "ephy0_led";
|
function = "ephy0_led";
|
||||||
pins = "gpio20";
|
pins = "gpio20";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy1_led: ephy1_led {
|
pinctrl_ephy1_led: ephy1_led-pins {
|
||||||
function = "ephy1_led";
|
function = "ephy1_led";
|
||||||
pins = "gpio21";
|
pins = "gpio21";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy2_led: ephy2_led {
|
pinctrl_ephy2_led: ephy2_led-pins {
|
||||||
function = "ephy2_led";
|
function = "ephy2_led";
|
||||||
pins = "gpio22";
|
pins = "gpio22";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy3_led: ephy3_led {
|
pinctrl_ephy3_led: ephy3_led-pins {
|
||||||
function = "ephy3_led";
|
function = "ephy3_led";
|
||||||
pins = "gpio23";
|
pins = "gpio23";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ext_irq0: ext_irq0 {
|
pinctrl_ext_irq0: ext_irq0-pins {
|
||||||
function = "ext_irq0";
|
function = "ext_irq0";
|
||||||
pins = "gpio24";
|
pins = "gpio24";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ext_irq1: ext_irq1 {
|
pinctrl_ext_irq1: ext_irq1-pins {
|
||||||
function = "ext_irq1";
|
function = "ext_irq1";
|
||||||
pins = "gpio25";
|
pins = "gpio25";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ext_irq2: ext_irq2 {
|
pinctrl_ext_irq2: ext_irq2-pins {
|
||||||
function = "ext_irq2";
|
function = "ext_irq2";
|
||||||
pins = "gpio26";
|
pins = "gpio26";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ext_irq3: ext_irq3 {
|
pinctrl_ext_irq3: ext_irq3-pins {
|
||||||
function = "ext_irq3";
|
function = "ext_irq3";
|
||||||
pins = "gpio27";
|
pins = "gpio27";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_nand: nand {
|
pinctrl_nand: nand-pins {
|
||||||
function = "nand";
|
function = "nand";
|
||||||
group = "nand_grp";
|
group = "nand_grp";
|
||||||
};
|
};
|
||||||
|
|||||||
@@ -19,7 +19,7 @@
|
|||||||
|
|
||||||
reset {
|
reset {
|
||||||
label = "reset";
|
label = "reset";
|
||||||
gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
|
||||||
linux,code = <KEY_RESTART>;
|
linux,code = <KEY_RESTART>;
|
||||||
debounce-interval = <60>;
|
debounce-interval = <60>;
|
||||||
};
|
};
|
||||||
@@ -30,27 +30,27 @@
|
|||||||
|
|
||||||
led@2 {
|
led@2 {
|
||||||
label = "green:dsl";
|
label = "green:dsl";
|
||||||
gpios = <&pinctrl 2 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@5 {
|
led@5 {
|
||||||
label = "green:internet";
|
label = "green:internet";
|
||||||
gpios = <&pinctrl 5 GPIO_ACTIVE_HIGH>;
|
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led_power_green: led@22 {
|
led_power_green: led@22 {
|
||||||
label = "green:power";
|
label = "green:power";
|
||||||
gpios = <&pinctrl 22 GPIO_ACTIVE_HIGH>;
|
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led_power_red: led@24 {
|
led_power_red: led@24 {
|
||||||
label = "red:power";
|
label = "red:power";
|
||||||
gpios = <&pinctrl 24 GPIO_ACTIVE_HIGH>;
|
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
led@31 {
|
led@31 {
|
||||||
label = "red:internet";
|
label = "red:internet";
|
||||||
gpios = <&pinctrl 31 GPIO_ACTIVE_HIGH>;
|
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|||||||
@@ -148,198 +148,190 @@
|
|||||||
timeout-sec = <30>;
|
timeout-sec = <30>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio: syscon@10000080 {
|
gpio_cntl: syscon@10000080 {
|
||||||
compatible = "syscon", "simple-mfd";
|
compatible = "brcm,bcm6368-gpio-sysctl",
|
||||||
|
"syscon", "simple-mfd";
|
||||||
reg = <0x10000080 0x80>;
|
reg = <0x10000080 0x80>;
|
||||||
|
ranges = <0 0x10000080 0x80>;
|
||||||
native-endian;
|
native-endian;
|
||||||
|
|
||||||
pinctrl: pin-controller {
|
gpio: gpio@0 {
|
||||||
compatible = "brcm,bcm6368-pinctrl";
|
compatible = "brcm,bcm6368-gpio";
|
||||||
|
reg-names = "dirout", "dat";
|
||||||
|
reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
|
||||||
gpio-controller;
|
gpio-controller;
|
||||||
|
gpio-ranges = <&pinctrl 0 0 38>;
|
||||||
#gpio-cells = <2>;
|
#gpio-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
interrupts-extended = <&ext_intc1 0 0>,
|
pinctrl: pinctrl@18 {
|
||||||
<&ext_intc1 1 0>,
|
compatible = "brcm,bcm6368-pinctrl";
|
||||||
<&ext_intc0 0 0>,
|
reg = <0x18 0x4>, <0x38 0x4>;
|
||||||
<&ext_intc0 1 0>,
|
|
||||||
<&ext_intc0 2 0>,
|
|
||||||
<&ext_intc0 3 0>;
|
|
||||||
interrupt-names = "gpio32",
|
|
||||||
"gpio33",
|
|
||||||
"gpio34",
|
|
||||||
"gpio35",
|
|
||||||
"gpio36",
|
|
||||||
"gpio37";
|
|
||||||
|
|
||||||
pinctrl_analog_afe_0: analog_afe_0 {
|
pinctrl_analog_afe_0: analog_afe_0-pins {
|
||||||
function = "analog_afe_0";
|
function = "analog_afe_0";
|
||||||
pins = "gpio0";
|
pins = "gpio0";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_analog_afe_1: analog_afe_1 {
|
pinctrl_analog_afe_1: analog_afe_1-pins {
|
||||||
function = "analog_afe_1";
|
function = "analog_afe_1";
|
||||||
pins = "gpio1";
|
pins = "gpio1";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_sys_irq: sys_irq {
|
pinctrl_sys_irq: sys_irq-pins {
|
||||||
function = "sys_irq";
|
function = "sys_irq";
|
||||||
pins = "gpio2";
|
pins = "gpio2";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led: serial_led {
|
pinctrl_serial_led: serial_led-pins {
|
||||||
pinctrl_serial_led_data: serial_led_data {
|
pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
function = "serial_led_data";
|
function = "serial_led_data";
|
||||||
pins = "gpio3";
|
pins = "gpio3";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_serial_led_clk: serial_led_clk {
|
pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
function = "serial_led_clk";
|
function = "serial_led_clk";
|
||||||
pins = "gpio4";
|
pins = "gpio4";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_inet_led: inet_led {
|
pinctrl_inet_led: inet_led-pins {
|
||||||
function = "inet_led";
|
function = "inet_led";
|
||||||
pins = "gpio5";
|
pins = "gpio5";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy0_led: ephy0_led {
|
pinctrl_ephy0_led: ephy0_led-pins {
|
||||||
function = "ephy0_led";
|
function = "ephy0_led";
|
||||||
pins = "gpio6";
|
pins = "gpio6";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy1_led: ephy1_led {
|
pinctrl_ephy1_led: ephy1_led-pins {
|
||||||
function = "ephy1_led";
|
function = "ephy1_led";
|
||||||
pins = "gpio7";
|
pins = "gpio7";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy2_led: ephy2_led {
|
pinctrl_ephy2_led: ephy2_led-pins {
|
||||||
function = "ephy2_led";
|
function = "ephy2_led";
|
||||||
pins = "gpio8";
|
pins = "gpio8";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ephy3_led: ephy3_led {
|
pinctrl_ephy3_led: ephy3_led-pins {
|
||||||
function = "ephy3_led";
|
function = "ephy3_led";
|
||||||
pins = "gpio9";
|
pins = "gpio9";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led_data: robosw_led_data {
|
pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
function = "robosw_led_data";
|
function = "robosw_led_data";
|
||||||
pins = "gpio10";
|
pins = "gpio10";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led_clk: robosw_led_clk {
|
pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
function = "robosw_led_clk";
|
function = "robosw_led_clk";
|
||||||
pins = "gpio11";
|
pins = "gpio11";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led0: robosw_led0 {
|
pinctrl_robosw_led0: robosw_led0-pins {
|
||||||
function = "robosw_led0";
|
function = "robosw_led0";
|
||||||
pins = "gpio12";
|
pins = "gpio12";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_robosw_led1: robosw_led1 {
|
pinctrl_robosw_led1: robosw_led1-pins {
|
||||||
function = "robosw_led1";
|
function = "robosw_led1";
|
||||||
pins = "gpio13";
|
pins = "gpio13";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_usb_device_led: usb_device_led {
|
pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
function = "usb_device_led";
|
function = "usb_device_led";
|
||||||
pins = "gpio14";
|
pins = "gpio14";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pci: pci {
|
pinctrl_pci: pci-pins {
|
||||||
pinctrl_pci_req1: pci_req1 {
|
pinctrl_pci_req1: pci_req1-pins {
|
||||||
function = "pci_req1";
|
function = "pci_req1";
|
||||||
pins = "gpio16";
|
pins = "gpio16";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pci_gnt1: pci_gnt1 {
|
pinctrl_pci_gnt1: pci_gnt1-pins {
|
||||||
function = "pci_gnt1";
|
function = "pci_gnt1";
|
||||||
pins = "gpio17";
|
pins = "gpio17";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pci_intb: pci_intb {
|
pinctrl_pci_intb: pci_intb-pins {
|
||||||
function = "pci_intb";
|
function = "pci_intb";
|
||||||
pins = "gpio18";
|
pins = "gpio18";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pci_req0: pci_req0 {
|
pinctrl_pci_req0: pci_req0-pins {
|
||||||
function = "pci_req0";
|
function = "pci_req0";
|
||||||
pins = "gpio19";
|
pins = "gpio19";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pci_gnt0: pci_gnt0 {
|
pinctrl_pci_gnt0: pci_gnt0-pins {
|
||||||
function = "pci_gnt0";
|
function = "pci_gnt0";
|
||||||
pins = "gpio20";
|
pins = "gpio20";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pcmcia: pcmcia {
|
pinctrl_pcmcia: pcmcia-pins {
|
||||||
pinctrl_pcmcia_cd1: pcmcia_cd1 {
|
pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
|
||||||
function = "pcmcia_cd1";
|
function = "pcmcia_cd1";
|
||||||
pins = "gpio22";
|
pins = "gpio22";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pcmcia_cd2: pcmcia_cd2 {
|
pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
|
||||||
function = "pcmcia_cd2";
|
function = "pcmcia_cd2";
|
||||||
pins = "gpio23";
|
pins = "gpio23";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pcmcia_vs1: pcmcia_vs1 {
|
pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
|
||||||
function = "pcmcia_vs1";
|
function = "pcmcia_vs1";
|
||||||
pins = "gpio24";
|
pins = "gpio24";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pcmcia_vs2: pcmcia_vs2 {
|
pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
|
||||||
function = "pcmcia_vs2";
|
function = "pcmcia_vs2";
|
||||||
pins = "gpio25";
|
pins = "gpio25";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ebi_cs2: ebi_cs2 {
|
pinctrl_ebi_cs2: ebi_cs2-pins {
|
||||||
function = "ebi_cs2";
|
function = "ebi_cs2";
|
||||||
pins = "gpio26";
|
pins = "gpio26";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_ebi_cs3: ebi_cs3 {
|
pinctrl_ebi_cs3: ebi_cs3-pins {
|
||||||
function = "ebi_cs3";
|
function = "ebi_cs3";
|
||||||
pins = "gpio27";
|
pins = "gpio27";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs2: spi_cs2 {
|
pinctrl_spi_cs2: spi_cs2-pins {
|
||||||
function = "spi_cs2";
|
function = "spi_cs2";
|
||||||
pins = "gpio28";
|
pins = "gpio28";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs3: spi_cs3 {
|
pinctrl_spi_cs3: spi_cs3-pins {
|
||||||
function = "spi_cs3";
|
function = "spi_cs3";
|
||||||
pins = "gpio29";
|
pins = "gpio29";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs4: spi_cs4 {
|
pinctrl_spi_cs4: spi_cs4-pins {
|
||||||
function = "spi_cs4";
|
function = "spi_cs4";
|
||||||
pins = "gpio30";
|
pins = "gpio30";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_spi_cs5: spi_cs5 {
|
pinctrl_spi_cs5: spi_cs5-pins {
|
||||||
function = "spi_cs5";
|
function = "spi_cs5";
|
||||||
pins = "gpio31";
|
pins = "gpio31";
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_uart1: uart1 {
|
pinctrl_uart1: uart1-pins {
|
||||||
function = "uart1";
|
function = "uart1";
|
||||||
group = "uart1_grp";
|
group = "uart1_grp";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
gpiobasemode: gpiobasemode@100000b8 {
|
|
||||||
compatible = "brcm,bcm6368-gpiobasemode", "syscon";
|
|
||||||
reg = <0x100000b8 0x4>;
|
|
||||||
};
|
|
||||||
|
|
||||||
leds: led-controller@100000d0 {
|
leds: led-controller@100000d0 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
|
|||||||
@@ -0,0 +1,45 @@
|
|||||||
|
From 9c7d24693d864f90b27aad5d15fbfe226c02898b Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:02 +0100
|
||||||
|
Subject: [PATCH 01/22] gpio: guard gpiochip_irqchip_add_domain() with
|
||||||
|
GPIOLIB_IRQCHIP
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
The current code doesn't check if GPIOLIB_IRQCHIP is enabled, which results in
|
||||||
|
a compilation error when trying to build gpio-regmap if CONFIG_GPIOLIB_IRQCHIP
|
||||||
|
isn't enabled.
|
||||||
|
|
||||||
|
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
|
||||||
|
Suggested-by: Michael Walle <michael@walle.cc>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
Reviewed-by: Michael Walle <michael@walle.cc>
|
||||||
|
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-2-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
include/linux/gpio/driver.h | 9 +++++++++
|
||||||
|
1 file changed, 9 insertions(+)
|
||||||
|
|
||||||
|
--- a/include/linux/gpio/driver.h
|
||||||
|
+++ b/include/linux/gpio/driver.h
|
||||||
|
@@ -637,8 +637,17 @@ int gpiochip_irqchip_add_key(struct gpio
|
||||||
|
bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
|
||||||
|
unsigned int offset);
|
||||||
|
|
||||||
|
+#ifdef CONFIG_GPIOLIB_IRQCHIP
|
||||||
|
int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
|
||||||
|
struct irq_domain *domain);
|
||||||
|
+#else
|
||||||
|
+static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
|
||||||
|
+ struct irq_domain *domain)
|
||||||
|
+{
|
||||||
|
+ WARN_ON(1);
|
||||||
|
+ return -EINVAL;
|
||||||
|
+}
|
||||||
|
+#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_LOCKDEP
|
||||||
|
|
||||||
@@ -0,0 +1,63 @@
|
|||||||
|
From d46bf9ec4596654f36245e3b14765bcb422be6ad Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:03 +0100
|
||||||
|
Subject: [PATCH 02/22] gpio: regmap: set gpio_chip of_node
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
This is needed for properly registering GPIO regmap as a child of a regmap
|
||||||
|
pin controller.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Michael Walle <michael@walle.cc>
|
||||||
|
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
||||||
|
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-3-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
drivers/gpio/gpio-regmap.c | 5 +++++
|
||||||
|
include/linux/gpio/regmap.h | 4 ++++
|
||||||
|
2 files changed, 9 insertions(+)
|
||||||
|
|
||||||
|
--- a/drivers/gpio/gpio-regmap.c
|
||||||
|
+++ b/drivers/gpio/gpio-regmap.c
|
||||||
|
@@ -254,6 +254,11 @@ struct gpio_regmap *gpio_regmap_register
|
||||||
|
chip->names = config->names;
|
||||||
|
chip->label = config->label ?: dev_name(config->parent);
|
||||||
|
|
||||||
|
+#if defined(CONFIG_OF_GPIO)
|
||||||
|
+ /* gpiolib will use of_node of the parent if chip->of_node is NULL */
|
||||||
|
+ chip->of_node = to_of_node(config->fwnode);
|
||||||
|
+#endif /* CONFIG_OF_GPIO */
|
||||||
|
+
|
||||||
|
/*
|
||||||
|
* If our regmap is fast_io we should probably set can_sleep to false.
|
||||||
|
* Right now, the regmap doesn't save this property, nor is there any
|
||||||
|
--- a/include/linux/gpio/regmap.h
|
||||||
|
+++ b/include/linux/gpio/regmap.h
|
||||||
|
@@ -4,6 +4,7 @@
|
||||||
|
#define _LINUX_GPIO_REGMAP_H
|
||||||
|
|
||||||
|
struct device;
|
||||||
|
+struct fwnode_handle;
|
||||||
|
struct gpio_regmap;
|
||||||
|
struct irq_domain;
|
||||||
|
struct regmap;
|
||||||
|
@@ -16,6 +17,8 @@ struct regmap;
|
||||||
|
* @parent: The parent device
|
||||||
|
* @regmap: The regmap used to access the registers
|
||||||
|
* given, the name of the device is used
|
||||||
|
+ * @fwnode: (Optional) The firmware node.
|
||||||
|
+ * If not given, the fwnode of the parent is used.
|
||||||
|
* @label: (Optional) Descriptive name for GPIO controller.
|
||||||
|
* If not given, the name of the device is used.
|
||||||
|
* @ngpio: Number of GPIOs
|
||||||
|
@@ -57,6 +60,7 @@ struct regmap;
|
||||||
|
struct gpio_regmap_config {
|
||||||
|
struct device *parent;
|
||||||
|
struct regmap *regmap;
|
||||||
|
+ struct fwnode_handle *fwnode;
|
||||||
|
|
||||||
|
const char *label;
|
||||||
|
int ngpio;
|
||||||
@@ -0,0 +1,163 @@
|
|||||||
|
From fb9da17bd26552f48cda4f2f658379e7f5860691 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:04 +0100
|
||||||
|
Subject: [PATCH 03/22] dt-bindings: improve BCM6345 GPIO binding documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Convert existing BCM6345 GPIO binding documentation to YAML and add binding
|
||||||
|
documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358,
|
||||||
|
BCM6362, BCM6368 and BCM63268 SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-4-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../bindings/gpio/brcm,bcm6345-gpio.txt | 46 ----------
|
||||||
|
.../bindings/gpio/brcm,bcm6345-gpio.yaml | 86 +++++++++++++++++++
|
||||||
|
2 files changed, 86 insertions(+), 46 deletions(-)
|
||||||
|
delete mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
|
||||||
|
|
||||||
|
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
|
||||||
|
+++ /dev/null
|
||||||
|
@@ -1,46 +0,0 @@
|
||||||
|
-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
|
||||||
|
-
|
||||||
|
-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
|
||||||
|
-are the only ones which don't need a pinctrl driver.
|
||||||
|
-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
|
||||||
|
-and/or written, and the direction changed from input to output.
|
||||||
|
-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
|
||||||
|
-and/or written, and the direction changed from input to output.
|
||||||
|
-
|
||||||
|
-Required properties:
|
||||||
|
- - compatible: should be "brcm,bcm6345-gpio"
|
||||||
|
- - reg-names: must contain
|
||||||
|
- "dat" - data register
|
||||||
|
- "dirout" - direction (output) register
|
||||||
|
- - reg: address + size pairs describing the GPIO register sets;
|
||||||
|
- order must correspond with the order of entries in reg-names
|
||||||
|
- - #gpio-cells: must be set to 2. The first cell is the pin number and
|
||||||
|
- the second cell is used to specify the gpio polarity:
|
||||||
|
- 0 = active high
|
||||||
|
- 1 = active low
|
||||||
|
- - gpio-controller: Marks the device node as a gpio controller.
|
||||||
|
-
|
||||||
|
-Optional properties:
|
||||||
|
- - native-endian: use native endian memory.
|
||||||
|
-
|
||||||
|
-Examples:
|
||||||
|
- - BCM6338:
|
||||||
|
- gpio: gpio-controller@fffe0407 {
|
||||||
|
- compatible = "brcm,bcm6345-gpio";
|
||||||
|
- reg-names = "dirout", "dat";
|
||||||
|
- reg = <0xfffe0407 1>, <0xfffe040f 1>;
|
||||||
|
-
|
||||||
|
- #gpio-cells = <2>;
|
||||||
|
- gpio-controller;
|
||||||
|
- };
|
||||||
|
-
|
||||||
|
- - BCM6345:
|
||||||
|
- gpio: gpio-controller@fffe0406 {
|
||||||
|
- compatible = "brcm,bcm6345-gpio";
|
||||||
|
- reg-names = "dirout", "dat";
|
||||||
|
- reg = <0xfffe0406 2>, <0xfffe040a 2>;
|
||||||
|
- native-endian;
|
||||||
|
-
|
||||||
|
- #gpio-cells = <2>;
|
||||||
|
- gpio-controller;
|
||||||
|
- };
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
|
||||||
|
@@ -0,0 +1,86 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6345 GPIO controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description: |+
|
||||||
|
+ Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
|
||||||
|
+
|
||||||
|
+ These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
|
||||||
|
+ are the only ones which don't need a pinctrl driver.
|
||||||
|
+
|
||||||
|
+ BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
|
||||||
|
+ and/or written, and the direction changed from input to output.
|
||||||
|
+ BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
|
||||||
|
+ and/or written, and the direction changed from input to output.
|
||||||
|
+ BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
|
||||||
|
+ and dirout registers, where GPIO state can be read and/or written, and the
|
||||||
|
+ direction changed from input to output.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ enum:
|
||||||
|
+ - brcm,bcm6318-gpio
|
||||||
|
+ - brcm,bcm6328-gpio
|
||||||
|
+ - brcm,bcm6345-gpio
|
||||||
|
+ - brcm,bcm6358-gpio
|
||||||
|
+ - brcm,bcm6362-gpio
|
||||||
|
+ - brcm,bcm6368-gpio
|
||||||
|
+ - brcm,bcm63268-gpio
|
||||||
|
+
|
||||||
|
+ gpio-controller: true
|
||||||
|
+
|
||||||
|
+ "#gpio-cells":
|
||||||
|
+ const: 2
|
||||||
|
+
|
||||||
|
+ gpio-ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ native-endian: true
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 2
|
||||||
|
+
|
||||||
|
+ reg-names:
|
||||||
|
+ items:
|
||||||
|
+ - const: dirout
|
||||||
|
+ - const: dat
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+ - reg-names
|
||||||
|
+ - gpio-controller
|
||||||
|
+ - '#gpio-cells'
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ gpio@fffe0406 {
|
||||||
|
+ compatible = "brcm,bcm6345-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0xfffe0406 2>, <0xfffe040a 2>;
|
||||||
|
+ native-endian;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ - |
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm63268-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 52>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,208 @@
|
|||||||
|
From 132f95016db0a0a0659e99b471a7d3fd0c60f961 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:05 +0100
|
||||||
|
Subject: [PATCH 04/22] pinctrl: bcm: add bcm63xx base code
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add a helper for registering BCM63XX pin controllers.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-5-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
drivers/pinctrl/bcm/Kconfig | 7 ++
|
||||||
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
|
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 109 ++++++++++++++++++++++++++
|
||||||
|
drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 43 ++++++++++
|
||||||
|
4 files changed, 160 insertions(+)
|
||||||
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c
|
||||||
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h
|
||||||
|
|
||||||
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
|
@@ -29,6 +29,13 @@ config PINCTRL_BCM2835
|
||||||
|
help
|
||||||
|
Say Y here to enable the Broadcom BCM2835 GPIO driver.
|
||||||
|
|
||||||
|
+config PINCTRL_BCM63XX
|
||||||
|
+ bool
|
||||||
|
+ select GENERIC_PINCONF
|
||||||
|
+ select GPIO_REGMAP
|
||||||
|
+ select PINCONF
|
||||||
|
+ select PINMUX
|
||||||
|
+
|
||||||
|
config PINCTRL_IPROC_GPIO
|
||||||
|
bool "Broadcom iProc GPIO (with PINCONF) driver"
|
||||||
|
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
||||||
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
|
@@ -3,6 +3,7 @@
|
||||||
|
|
||||||
|
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
|
||||||
|
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
||||||
|
+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
|
||||||
|
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
|
||||||
|
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
|
||||||
|
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
|
||||||
|
@@ -0,0 +1,109 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
+/*
|
||||||
|
+ * Driver for BCM63xx GPIO unit (pinctrl + GPIO)
|
||||||
|
+ *
|
||||||
|
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/gpio/regmap.h>
|
||||||
|
+#include <linux/mfd/syscon.h>
|
||||||
|
+#include <linux/mod_devicetable.h>
|
||||||
|
+#include <linux/of.h>
|
||||||
|
+#include <linux/platform_device.h>
|
||||||
|
+
|
||||||
|
+#include "pinctrl-bcm63xx.h"
|
||||||
|
+
|
||||||
|
+#define BCM63XX_BANK_SIZE 4
|
||||||
|
+
|
||||||
|
+#define BCM63XX_DIROUT_REG 0x04
|
||||||
|
+#define BCM63XX_DATA_REG 0x0c
|
||||||
|
+
|
||||||
|
+static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
|
||||||
|
+ unsigned int base, unsigned int offset,
|
||||||
|
+ unsigned int *reg, unsigned int *mask)
|
||||||
|
+{
|
||||||
|
+ unsigned int line = offset % BCM63XX_BANK_GPIOS;
|
||||||
|
+ unsigned int stride = offset / BCM63XX_BANK_GPIOS;
|
||||||
|
+
|
||||||
|
+ *reg = base - stride * BCM63XX_BANK_SIZE;
|
||||||
|
+ *mask = BIT(line);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+static const struct of_device_id bcm63xx_gpio_of_match[] = {
|
||||||
|
+ { .compatible = "brcm,bcm6318-gpio", },
|
||||||
|
+ { .compatible = "brcm,bcm6328-gpio", },
|
||||||
|
+ { .compatible = "brcm,bcm6358-gpio", },
|
||||||
|
+ { .compatible = "brcm,bcm6362-gpio", },
|
||||||
|
+ { .compatible = "brcm,bcm6368-gpio", },
|
||||||
|
+ { .compatible = "brcm,bcm63268-gpio", },
|
||||||
|
+ { /* sentinel */ }
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
|
||||||
|
+ const struct bcm63xx_pinctrl_soc *soc,
|
||||||
|
+ struct bcm63xx_pinctrl *pc)
|
||||||
|
+{
|
||||||
|
+ struct gpio_regmap_config grc = {0};
|
||||||
|
+
|
||||||
|
+ grc.parent = dev;
|
||||||
|
+ grc.fwnode = &node->fwnode;
|
||||||
|
+ grc.ngpio = soc->ngpios;
|
||||||
|
+ grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
|
||||||
|
+ grc.regmap = pc->regs;
|
||||||
|
+ grc.reg_dat_base = BCM63XX_DATA_REG;
|
||||||
|
+ grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
|
||||||
|
+ grc.reg_set_base = BCM63XX_DATA_REG;
|
||||||
|
+ grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
|
||||||
|
+
|
||||||
|
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
|
||||||
|
+ const struct bcm63xx_pinctrl_soc *soc,
|
||||||
|
+ void *driver_data)
|
||||||
|
+{
|
||||||
|
+ struct device *dev = &pdev->dev;
|
||||||
|
+ struct bcm63xx_pinctrl *pc;
|
||||||
|
+ struct device_node *node;
|
||||||
|
+ int err;
|
||||||
|
+
|
||||||
|
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
||||||
|
+ if (!pc)
|
||||||
|
+ return -ENOMEM;
|
||||||
|
+
|
||||||
|
+ platform_set_drvdata(pdev, pc);
|
||||||
|
+
|
||||||
|
+ pc->dev = dev;
|
||||||
|
+ pc->driver_data = driver_data;
|
||||||
|
+
|
||||||
|
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
||||||
|
+ if (IS_ERR(pc->regs))
|
||||||
|
+ return PTR_ERR(pc->regs);
|
||||||
|
+
|
||||||
|
+ pc->pctl_desc.name = dev_name(dev);
|
||||||
|
+ pc->pctl_desc.pins = soc->pins;
|
||||||
|
+ pc->pctl_desc.npins = soc->npins;
|
||||||
|
+ pc->pctl_desc.pctlops = soc->pctl_ops;
|
||||||
|
+ pc->pctl_desc.pmxops = soc->pmx_ops;
|
||||||
|
+ pc->pctl_desc.owner = THIS_MODULE;
|
||||||
|
+
|
||||||
|
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
||||||
|
+ if (IS_ERR(pc->pctl_dev))
|
||||||
|
+ return PTR_ERR(pc->pctl_dev);
|
||||||
|
+
|
||||||
|
+ for_each_child_of_node(dev->parent->of_node, node) {
|
||||||
|
+ if (of_match_node(bcm63xx_gpio_of_match, node)) {
|
||||||
|
+ err = bcm63xx_gpio_probe(dev, node, soc, pc);
|
||||||
|
+ if (err) {
|
||||||
|
+ dev_err(dev, "could not add GPIO chip\n");
|
||||||
|
+ of_node_put(node);
|
||||||
|
+ return err;
|
||||||
|
+ }
|
||||||
|
+ }
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
|
||||||
|
@@ -0,0 +1,43 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
+/*
|
||||||
|
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#ifndef __PINCTRL_BCM63XX_H__
|
||||||
|
+#define __PINCTRL_BCM63XX_H__
|
||||||
|
+
|
||||||
|
+#include <linux/pinctrl/pinctrl.h>
|
||||||
|
+
|
||||||
|
+#define BCM63XX_BANK_GPIOS 32
|
||||||
|
+
|
||||||
|
+struct bcm63xx_pinctrl_soc {
|
||||||
|
+ struct pinctrl_ops *pctl_ops;
|
||||||
|
+ struct pinmux_ops *pmx_ops;
|
||||||
|
+
|
||||||
|
+ const struct pinctrl_pin_desc *pins;
|
||||||
|
+ unsigned npins;
|
||||||
|
+
|
||||||
|
+ unsigned int ngpios;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+struct bcm63xx_pinctrl {
|
||||||
|
+ struct device *dev;
|
||||||
|
+ struct regmap *regs;
|
||||||
|
+
|
||||||
|
+ struct pinctrl_desc pctl_desc;
|
||||||
|
+ struct pinctrl_dev *pctl_dev;
|
||||||
|
+
|
||||||
|
+ void *driver_data;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
|
||||||
|
+{
|
||||||
|
+ return pin % BCM63XX_BANK_GPIOS;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
|
||||||
|
+ const struct bcm63xx_pinctrl_soc *soc,
|
||||||
|
+ void *driver_data);
|
||||||
|
+
|
||||||
|
+#endif /* __PINCTRL_BCM63XX_H__ */
|
||||||
@@ -0,0 +1,152 @@
|
|||||||
|
From 44dbcd8eb08a0febbb46ac7b9331f28a320bdf9a Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:06 +0100
|
||||||
|
Subject: [PATCH 05/22] dt-bindings: add BCM6328 pincontroller binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the pincontrol core found in BCM6328 SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-6-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../pinctrl/brcm,bcm6328-pinctrl.yaml | 127 ++++++++++++++++++
|
||||||
|
1 file changed, 127 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
|
||||||
|
@@ -0,0 +1,127 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6328 pin controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Bindings for Broadcom's BCM6328 memory-mapped pin controller.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ const: brcm,bcm6328-pinctrl
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ '-pins$':
|
||||||
|
+ type: object
|
||||||
|
+ $ref: pinmux-node.yaml#
|
||||||
|
+
|
||||||
|
+ properties:
|
||||||
|
+ function:
|
||||||
|
+ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
|
||||||
|
+ led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
|
||||||
|
+ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
|
||||||
|
+
|
||||||
|
+ pins:
|
||||||
|
+ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
|
||||||
|
+ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
|
||||||
|
+ usb_port1 ]
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6328-pinctrl";
|
||||||
|
+ reg = <0x18 0x10>;
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_act_led: inet_act_led-pins {
|
||||||
|
+ function = "inet_act_led";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcie_clkreq: pcie_clkreq-pins {
|
||||||
|
+ function = "pcie_clkreq";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio20";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_act_led: ephy0_act_led-pins {
|
||||||
|
+ function = "ephy0_act_led";
|
||||||
|
+ pins = "gpio25";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_act_led: ephy1_act_led-pins {
|
||||||
|
+ function = "ephy1_act_led";
|
||||||
|
+ pins = "gpio26";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_act_led: ephy2_act_led-pins {
|
||||||
|
+ function = "ephy2_act_led";
|
||||||
|
+ pins = "gpio27";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_act_led: ephy3_act_led-pins {
|
||||||
|
+ function = "ephy3_act_led";
|
||||||
|
+ pins = "gpio28";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs1: hsspi_cs1-pins {
|
||||||
|
+ function = "hsspi_cs1";
|
||||||
|
+ pins = "hsspi_cs1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_port1_device: usb_port1_device-pins {
|
||||||
|
+ function = "usb_device_port";
|
||||||
|
+ pins = "usb_port1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_port1_host: usb_port1_host-pins {
|
||||||
|
+ function = "usb_host_port";
|
||||||
|
+ pins = "usb_port1";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,185 @@
|
|||||||
|
From 7f9dfaa2afb6bc3481e531c405b05acf6091af29 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:07 +0100
|
||||||
|
Subject: [PATCH 06/22] dt-bindings: add BCM6328 GPIO sysctl binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the GPIO sysctl found in BCM6328 SoCs.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-7-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../mfd/brcm,bcm6328-gpio-sysctl.yaml | 162 ++++++++++++++++++
|
||||||
|
1 file changed, 162 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
|
||||||
|
@@ -0,0 +1,162 @@
|
||||||
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Broadcom BCM6328 SoC GPIO system controller which provides a register map
|
||||||
|
+ for controlling the GPIO and pins of the SoC.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ "#address-cells": true
|
||||||
|
+
|
||||||
|
+ "#size-cells": true
|
||||||
|
+
|
||||||
|
+ compatible:
|
||||||
|
+ items:
|
||||||
|
+ - const: brcm,bcm6328-gpio-sysctl
|
||||||
|
+ - const: syscon
|
||||||
|
+ - const: simple-mfd
|
||||||
|
+
|
||||||
|
+ ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ "^gpio@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../gpio/brcm,bcm6345-gpio.yaml"
|
||||||
|
+ description:
|
||||||
|
+ GPIO controller for the SoC GPIOs. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
|
||||||
|
+
|
||||||
|
+ "^pinctrl@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml"
|
||||||
|
+ description:
|
||||||
|
+ Pin controller for the SoC pins. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml.
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - "#address-cells"
|
||||||
|
+ - compatible
|
||||||
|
+ - ranges
|
||||||
|
+ - reg
|
||||||
|
+ - "#size-cells"
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ syscon@10000080 {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd";
|
||||||
|
+ reg = <0x10000080 0x80>;
|
||||||
|
+ ranges = <0 0x10000080 0x80>;
|
||||||
|
+
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm6328-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 32>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl: pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6328-pinctrl";
|
||||||
|
+ reg = <0x18 0x10>;
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_act_led: inet_act_led-pins {
|
||||||
|
+ function = "inet_act_led";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcie_clkreq: pcie_clkreq-pins {
|
||||||
|
+ function = "pcie_clkreq";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ pins = "gpio20";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_act_led: ephy0_act_led-pins {
|
||||||
|
+ function = "ephy0_act_led";
|
||||||
|
+ pins = "gpio25";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_act_led: ephy1_act_led-pins {
|
||||||
|
+ function = "ephy1_act_led";
|
||||||
|
+ pins = "gpio26";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_act_led: ephy2_act_led-pins {
|
||||||
|
+ function = "ephy2_act_led";
|
||||||
|
+ pins = "gpio27";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_act_led: ephy3_act_led-pins {
|
||||||
|
+ function = "ephy3_act_led";
|
||||||
|
+ pins = "gpio28";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs1: hsspi_cs1-pins {
|
||||||
|
+ function = "hsspi_cs1";
|
||||||
|
+ pins = "hsspi_cs1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_port1_device: usb_port1_device-pins {
|
||||||
|
+ function = "usb_device_port";
|
||||||
|
+ pins = "usb_port1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_port1_host: usb_port1_host-pins {
|
||||||
|
+ function = "usb_host_port";
|
||||||
|
+ pins = "usb_port1";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -1,38 +1,38 @@
|
|||||||
From 3373a507212e6394921781766e9cd0dc155c62ba Mon Sep 17 00:00:00 2001
|
From 9bf34ac5ab5805f0a798d40423c05596b7a0cee6 Mon Sep 17 00:00:00 2001
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
Date: Fri, 24 Jun 2016 22:12:50 +0200
|
Date: Wed, 24 Mar 2021 09:19:08 +0100
|
||||||
Subject: [PATCH 02/12] pinctrl: add a pincontrol driver for BCM6328
|
Subject: [PATCH 07/22] pinctrl: add a pincontrol driver for BCM6328
|
||||||
MIME-Version: 1.0
|
MIME-Version: 1.0
|
||||||
Content-Type: text/plain; charset=UTF-8
|
Content-Type: text/plain; charset=UTF-8
|
||||||
Content-Transfer-Encoding: 8bit
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as
|
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as
|
||||||
GPIOs, as LEDs for the integrated LED controller, or various other
|
GPIOs, as LEDs for the integrated LED controller, or various other
|
||||||
functions. Its pincontrol mux registers also control other aspects, like
|
functions. Its pincontrol mux registers also control other aspects, like
|
||||||
switching the second USB port between host and device mode.
|
switching the second USB port between host and device mode.
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
---
|
---
|
||||||
drivers/pinctrl/bcm/Kconfig | 11 +
|
drivers/pinctrl/bcm/Kconfig | 8 +
|
||||||
drivers/pinctrl/bcm/Makefile | 1 +
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
drivers/pinctrl/bcm/pinctrl-bcm6328.c | 581 ++++++++++++++++++++++++++
|
drivers/pinctrl/bcm/pinctrl-bcm6328.c | 404 ++++++++++++++++++++++++++
|
||||||
3 files changed, 593 insertions(+)
|
3 files changed, 413 insertions(+)
|
||||||
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6328.c
|
||||||
|
|
||||||
--- a/drivers/pinctrl/bcm/Kconfig
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
+++ b/drivers/pinctrl/bcm/Kconfig
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
@@ -29,6 +29,17 @@ config PINCTRL_BCM2835
|
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
|
||||||
help
|
select PINCONF
|
||||||
Say Y here to enable the Broadcom BCM2835 GPIO driver.
|
select PINMUX
|
||||||
|
|
||||||
+config PINCTRL_BCM6328
|
+config PINCTRL_BCM6328
|
||||||
+ bool "Broadcom BCM6328 GPIO driver"
|
+ bool "Broadcom BCM6328 GPIO driver"
|
||||||
+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
+ select PINMUX
|
+ select PINCTRL_BCM63XX
|
||||||
+ select PINCONF
|
|
||||||
+ select GENERIC_PINCONF
|
|
||||||
+ select MFD_SYSCON
|
|
||||||
+ default BMIPS_GENERIC
|
+ default BMIPS_GENERIC
|
||||||
+ help
|
+ help
|
||||||
+ Say Y here to enable the Broadcom BCM6328 GPIO driver.
|
+ Say Y here to enable the Broadcom BCM6328 GPIO driver.
|
||||||
@@ -42,17 +42,17 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
||||||
--- a/drivers/pinctrl/bcm/Makefile
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
+++ b/drivers/pinctrl/bcm/Makefile
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
@@ -3,6 +3,7 @@
|
@@ -4,6 +4,7 @@
|
||||||
|
|
||||||
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
|
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
||||||
|
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
|
||||||
+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
||||||
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
|
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
|
||||||
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
|
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
|
||||||
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6328.c
|
||||||
@@ -0,0 +1,581 @@
|
@@ -0,0 +1,404 @@
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
+/*
|
+/*
|
||||||
+ * Driver for BCM6328 GPIO unit (pinctrl + GPIO)
|
+ * Driver for BCM6328 GPIO unit (pinctrl + GPIO)
|
||||||
@@ -61,36 +61,25 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
+ */
|
+ */
|
||||||
+
|
+
|
||||||
+#include <linux/bitops.h>
|
+#include <linux/bits.h>
|
||||||
+#include <linux/gpio.h>
|
+#include <linux/gpio/driver.h>
|
||||||
+#include <linux/kernel.h>
|
+#include <linux/kernel.h>
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/of.h>
|
+#include <linux/of.h>
|
||||||
+#include <linux/of_gpio.h>
|
+#include <linux/pinctrl/pinmux.h>
|
||||||
+#include <linux/of_irq.h>
|
|
||||||
+#include <linux/platform_device.h>
|
+#include <linux/platform_device.h>
|
||||||
+#include <linux/regmap.h>
|
+#include <linux/regmap.h>
|
||||||
+
|
+
|
||||||
+#include <linux/pinctrl/machine.h>
|
|
||||||
+#include <linux/pinctrl/pinconf.h>
|
|
||||||
+#include <linux/pinctrl/pinconf-generic.h>
|
|
||||||
+#include <linux/pinctrl/pinmux.h>
|
|
||||||
+
|
|
||||||
+#include "../core.h"
|
|
||||||
+#include "../pinctrl-utils.h"
|
+#include "../pinctrl-utils.h"
|
||||||
+
|
+
|
||||||
+#define MODULE_NAME "bcm6328-pinctrl"
|
+#include "pinctrl-bcm63xx.h"
|
||||||
|
+
|
||||||
+#define BCM6328_NUM_GPIOS 32
|
+#define BCM6328_NUM_GPIOS 32
|
||||||
+
|
+
|
||||||
+#define BANK_SIZE sizeof(uint32_t)
|
|
||||||
+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
|
|
||||||
+
|
|
||||||
+#define BCM6328_DIROUT_REG 0x04
|
|
||||||
+#define BCM6328_DATA_REG 0x0c
|
|
||||||
+#define BCM6328_MODE_REG 0x18
|
+#define BCM6328_MODE_REG 0x18
|
||||||
+#define BCM6328_MUX_HI_REG 0x1c
|
+#define BCM6328_MUX_HI_REG 0x1c
|
||||||
+#define BCM6328_MUX_LO_REG 0x20
|
+#define BCM6328_MUX_LO_REG 0x20
|
||||||
+#define BCM6328_MUX_OTHER_REG 0x24
|
+#define BCM6328_MUX_OTHER_REG 0x24
|
||||||
|
+#define BCM6328_MUX_MASK GENMASK(1, 0)
|
||||||
+
|
+
|
||||||
+struct bcm6328_pingroup {
|
+struct bcm6328_pingroup {
|
||||||
+ const char *name;
|
+ const char *name;
|
||||||
@@ -107,14 +96,10 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ unsigned mux_val:2;
|
+ unsigned mux_val:2;
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+struct bcm6328_pinctrl {
|
+static const unsigned int bcm6328_mux[] = {
|
||||||
+ struct device *dev;
|
+ BCM6328_MUX_LO_REG,
|
||||||
+ struct regmap *regs;
|
+ BCM6328_MUX_HI_REG,
|
||||||
+
|
+ BCM6328_MUX_OTHER_REG
|
||||||
+ struct pinctrl_dev *pctl_dev;
|
|
||||||
+ struct gpio_chip gpio_chip;
|
|
||||||
+ struct pinctrl_desc pctl_desc;
|
|
||||||
+ struct pinctrl_gpio_range gpio_range;
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static const struct pinctrl_pin_desc bcm6328_pins[] = {
|
+static const struct pinctrl_pin_desc bcm6328_pins[] = {
|
||||||
@@ -344,119 +329,11 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ BCM6328_MUX_FUN(usb_device_port, 2),
|
+ BCM6328_MUX_FUN(usb_device_port, 2),
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6328_bank_pin(unsigned int pin)
|
+static inline unsigned int bcm6328_mux_off(unsigned int pin)
|
||||||
+{
|
+{
|
||||||
+ return pin % PINS_PER_BANK;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ static const unsigned int bcm6328_mux[] = {
|
|
||||||
+ BCM6328_MUX_LO_REG,
|
|
||||||
+ BCM6328_MUX_HI_REG,
|
|
||||||
+ BCM6328_MUX_OTHER_REG
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ return bcm6328_mux[pin / 16];
|
+ return bcm6328_mux[pin / 16];
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6328_reg_off(unsigned int reg, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6328_gpio_direction_input(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6328_bank_pin(pin);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an input GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6328_gpio_direction_output(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin, int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin);
|
|
||||||
+ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6328_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an output GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin));
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6328_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6328_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, data, &val);
|
|
||||||
+
|
|
||||||
+ return !!(val & BIT(bank_pin));
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6328_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6328_reg_off(BCM6328_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6328_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, dirout, &val);
|
|
||||||
+
|
|
||||||
+ if (val & BIT(bank_pin))
|
|
||||||
+ return GPIO_LINE_DIRECTION_OUT;
|
|
||||||
+
|
|
||||||
+ return GPIO_LINE_DIRECTION_IN;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void bcm6328_gpio_set(struct gpio_chip *chip, unsigned int pin,
|
|
||||||
+ int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6328_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6328_reg_off(BCM6328_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6328_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6328_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
||||||
+{
|
|
||||||
+ char irq_name[7];
|
|
||||||
+
|
|
||||||
+ sprintf(irq_name, "gpio%d", gpio);
|
|
||||||
+
|
|
||||||
+ return of_irq_get_byname(chip->of_node, irq_name);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
||||||
+{
|
+{
|
||||||
+ return ARRAY_SIZE(bcm6328_groups);
|
+ return ARRAY_SIZE(bcm6328_groups);
|
||||||
@@ -500,22 +377,22 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pc, unsigned pin,
|
+static void bcm6328_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
|
||||||
+ unsigned int mode, unsigned int mux)
|
+ unsigned int mode, unsigned int mux)
|
||||||
+{
|
+{
|
||||||
+ if (pin < BCM6328_NUM_GPIOS)
|
+ if (pin < BCM6328_NUM_GPIOS)
|
||||||
+ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin),
|
+ regmap_update_bits(pc->regs, BCM6328_MODE_REG, BIT(pin),
|
||||||
+ mode ? BIT(pin) : 0);
|
+ mode ? BIT(pin) : 0);
|
||||||
+
|
+
|
||||||
+ regmap_update_bits(pc->regs, bcm6318_mux_off(pin),
|
+ regmap_update_bits(pc->regs, bcm6328_mux_off(pin),
|
||||||
+ 3UL << ((pin % 16) * 2),
|
+ BCM6328_MUX_MASK << ((pin % 16) * 2),
|
||||||
+ mux << ((pin % 16) * 2));
|
+ mux << ((pin % 16) * 2));
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
||||||
+ unsigned selector, unsigned group)
|
+ unsigned selector, unsigned group)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6328_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+ const struct bcm6328_pingroup *pg = &bcm6328_groups[group];
|
+ const struct bcm6328_pingroup *pg = &bcm6328_groups[group];
|
||||||
+ const struct bcm6328_function *f = &bcm6328_funcs[selector];
|
+ const struct bcm6328_function *f = &bcm6328_funcs[selector];
|
||||||
+
|
+
|
||||||
@@ -528,7 +405,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ struct pinctrl_gpio_range *range,
|
+ struct pinctrl_gpio_range *range,
|
||||||
+ unsigned offset)
|
+ unsigned offset)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6328_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+
|
+
|
||||||
+ /* disable all functions using this pin */
|
+ /* disable all functions using this pin */
|
||||||
+ bcm6328_rmw_mux(pc, offset, 0, 0);
|
+ bcm6328_rmw_mux(pc, offset, 0, 0);
|
||||||
@@ -537,98 +414,44 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static struct pinctrl_ops bcm6328_pctl_ops = {
|
+static struct pinctrl_ops bcm6328_pctl_ops = {
|
||||||
+ .get_groups_count = bcm6328_pinctrl_get_group_count,
|
+ .dt_free_map = pinctrl_utils_free_map,
|
||||||
|
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
||||||
+ .get_group_name = bcm6328_pinctrl_get_group_name,
|
+ .get_group_name = bcm6328_pinctrl_get_group_name,
|
||||||
+ .get_group_pins = bcm6328_pinctrl_get_group_pins,
|
+ .get_group_pins = bcm6328_pinctrl_get_group_pins,
|
||||||
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
+ .get_groups_count = bcm6328_pinctrl_get_group_count,
|
||||||
+ .dt_free_map = pinctrl_utils_free_map,
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct pinmux_ops bcm6328_pmx_ops = {
|
+static struct pinmux_ops bcm6328_pmx_ops = {
|
||||||
+ .get_functions_count = bcm6328_pinctrl_get_func_count,
|
|
||||||
+ .get_function_name = bcm6328_pinctrl_get_func_name,
|
|
||||||
+ .get_function_groups = bcm6328_pinctrl_get_groups,
|
+ .get_function_groups = bcm6328_pinctrl_get_groups,
|
||||||
+ .set_mux = bcm6328_pinctrl_set_mux,
|
+ .get_function_name = bcm6328_pinctrl_get_func_name,
|
||||||
|
+ .get_functions_count = bcm6328_pinctrl_get_func_count,
|
||||||
+ .gpio_request_enable = bcm6328_gpio_request_enable,
|
+ .gpio_request_enable = bcm6328_gpio_request_enable,
|
||||||
|
+ .set_mux = bcm6328_pinctrl_set_mux,
|
||||||
+ .strict = true,
|
+ .strict = true,
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
|
+static const struct bcm63xx_pinctrl_soc bcm6328_soc = {
|
||||||
|
+ .ngpios = BCM6328_NUM_GPIOS,
|
||||||
|
+ .npins = ARRAY_SIZE(bcm6328_pins),
|
||||||
|
+ .pctl_ops = &bcm6328_pctl_ops,
|
||||||
|
+ .pins = bcm6328_pins,
|
||||||
|
+ .pmx_ops = &bcm6328_pmx_ops,
|
||||||
|
+};
|
||||||
|
+
|
||||||
+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
|
+static int bcm6328_pinctrl_probe(struct platform_device *pdev)
|
||||||
+{
|
+{
|
||||||
+ struct device *dev = &pdev->dev;
|
+ return bcm63xx_pinctrl_probe(pdev, &bcm6328_soc, NULL);
|
||||||
+ struct device_node *np = dev->of_node;
|
|
||||||
+ struct bcm6328_pinctrl *pc;
|
|
||||||
+ int err;
|
|
||||||
+
|
|
||||||
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
|
||||||
+ if (!pc)
|
|
||||||
+ return -ENOMEM;
|
|
||||||
+
|
|
||||||
+ platform_set_drvdata(pdev, pc);
|
|
||||||
+ pc->dev = dev;
|
|
||||||
+
|
|
||||||
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
|
||||||
+ if (IS_ERR(pc->regs))
|
|
||||||
+ return PTR_ERR(pc->regs);
|
|
||||||
+
|
|
||||||
+ pc->gpio_chip.label = MODULE_NAME;
|
|
||||||
+ pc->gpio_chip.owner = THIS_MODULE;
|
|
||||||
+ pc->gpio_chip.request = gpiochip_generic_request;
|
|
||||||
+ pc->gpio_chip.free = gpiochip_generic_free;
|
|
||||||
+ pc->gpio_chip.direction_input = bcm6328_gpio_direction_input;
|
|
||||||
+ pc->gpio_chip.direction_output = bcm6328_gpio_direction_output;
|
|
||||||
+ pc->gpio_chip.get_direction = bcm6328_gpio_get_direction;
|
|
||||||
+ pc->gpio_chip.get = bcm6328_gpio_get;
|
|
||||||
+ pc->gpio_chip.set = bcm6328_gpio_set;
|
|
||||||
+ pc->gpio_chip.set_config = gpiochip_generic_config;
|
|
||||||
+ pc->gpio_chip.base = -1;
|
|
||||||
+ pc->gpio_chip.ngpio = BCM6328_NUM_GPIOS;
|
|
||||||
+ pc->gpio_chip.can_sleep = false;
|
|
||||||
+ pc->gpio_chip.parent = dev;
|
|
||||||
+ pc->gpio_chip.of_node = np;
|
|
||||||
+
|
|
||||||
+ if (of_get_property(np, "interrupt-names", NULL))
|
|
||||||
+ pc->gpio_chip.to_irq = bcm6328_gpio_to_irq;
|
|
||||||
+
|
|
||||||
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
||||||
+ if (err) {
|
|
||||||
+ dev_err(dev, "could not add GPIO chip\n");
|
|
||||||
+ return err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->pctl_desc.name = MODULE_NAME,
|
|
||||||
+ pc->pctl_desc.pins = bcm6328_pins,
|
|
||||||
+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6328_pins),
|
|
||||||
+ pc->pctl_desc.pctlops = &bcm6328_pctl_ops,
|
|
||||||
+ pc->pctl_desc.pmxops = &bcm6328_pmx_ops,
|
|
||||||
+ pc->pctl_desc.owner = THIS_MODULE,
|
|
||||||
+
|
|
||||||
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
|
||||||
+ if (IS_ERR(pc->pctl_dev)) {
|
|
||||||
+ gpiochip_remove(&pc->gpio_chip);
|
|
||||||
+ return PTR_ERR(pc->pctl_dev);
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->gpio_range.name = MODULE_NAME;
|
|
||||||
+ pc->gpio_range.npins = BCM6328_NUM_GPIOS;
|
|
||||||
+ pc->gpio_range.base = pc->gpio_chip.base;
|
|
||||||
+ pc->gpio_range.gc = &pc->gpio_chip;
|
|
||||||
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
||||||
+
|
|
||||||
+ dev_info(dev, "registered\n");
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static const struct of_device_id bcm6328_pinctrl_match[] = {
|
+static const struct of_device_id bcm6328_pinctrl_match[] = {
|
||||||
+ { .compatible = "brcm,bcm6328-pinctrl", },
|
+ { .compatible = "brcm,bcm6328-pinctrl", },
|
||||||
+ { },
|
+ { /* sentinel */ }
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct platform_driver bcm6328_pinctrl_driver = {
|
+static struct platform_driver bcm6328_pinctrl_driver = {
|
||||||
+ .probe = bcm6328_pinctrl_probe,
|
+ .probe = bcm6328_pinctrl_probe,
|
||||||
+ .driver = {
|
+ .driver = {
|
||||||
+ .name = MODULE_NAME,
|
+ .name = "bcm6328-pinctrl",
|
||||||
+ .of_match_table = bcm6328_pinctrl_match,
|
+ .of_match_table = bcm6328_pinctrl_match,
|
||||||
+ },
|
+ },
|
||||||
+};
|
+};
|
||||||
@@ -0,0 +1,118 @@
|
|||||||
|
From 6d591614bfe881bb7664c9bebb6a48231c059411 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:09 +0100
|
||||||
|
Subject: [PATCH 08/22] dt-bindings: add BCM6358 pincontroller binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the pincontrol core found in BCM6358 SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-9-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../pinctrl/brcm,bcm6358-pinctrl.yaml | 93 +++++++++++++++++++
|
||||||
|
1 file changed, 93 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
|
||||||
|
@@ -0,0 +1,93 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6358 pin controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Bindings for Broadcom's BCM6358 memory-mapped pin controller.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ const: brcm,bcm6358-pinctrl
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ '-pins$':
|
||||||
|
+ type: object
|
||||||
|
+ $ref: pinmux-node.yaml#
|
||||||
|
+
|
||||||
|
+ properties:
|
||||||
|
+ function:
|
||||||
|
+ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
|
||||||
|
+ pwm_syn_clk, sys_irq ]
|
||||||
|
+
|
||||||
|
+ pins:
|
||||||
|
+ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
|
||||||
|
+ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6358-pinctrl";
|
||||||
|
+ reg = <0x18 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_ebi_cs: ebi_cs-pins {
|
||||||
|
+ function = "ebi_cs";
|
||||||
|
+ groups = "ebi_cs_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1: uart1-pins {
|
||||||
|
+ function = "uart1";
|
||||||
|
+ groups = "uart1_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ function = "serial_led";
|
||||||
|
+ groups = "serial_led_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_legacy_led: legacy_led-pins {
|
||||||
|
+ function = "legacy_led";
|
||||||
|
+ groups = "legacy_led_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_led: led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ groups = "led_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs_23: spi_cs-pins {
|
||||||
|
+ function = "spi_cs";
|
||||||
|
+ groups = "spi_cs_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_utopia: utopia-pins {
|
||||||
|
+ function = "utopia";
|
||||||
|
+ groups = "utopia_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
|
||||||
|
+ function = "pwm_syn_clk";
|
||||||
|
+ groups = "pwm_syn_clk_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_sys_irq: sys_irq-pins {
|
||||||
|
+ function = "sys_irq";
|
||||||
|
+ groups = "sys_irq_grp";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,153 @@
|
|||||||
|
From cfb1b98bc8d5ffd813428cb03c63b54cf63dd785 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:10 +0100
|
||||||
|
Subject: [PATCH 09/22] dt-bindings: add BCM6358 GPIO sysctl binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the GPIO sysctl found in BCM6358 SoCs.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-10-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../mfd/brcm,bcm6358-gpio-sysctl.yaml | 130 ++++++++++++++++++
|
||||||
|
1 file changed, 130 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
|
||||||
|
@@ -0,0 +1,130 @@
|
||||||
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Broadcom BCM6358 SoC GPIO system controller which provides a register map
|
||||||
|
+ for controlling the GPIO and pins of the SoC.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ "#address-cells": true
|
||||||
|
+
|
||||||
|
+ "#size-cells": true
|
||||||
|
+
|
||||||
|
+ compatible:
|
||||||
|
+ items:
|
||||||
|
+ - const: brcm,bcm6358-gpio-sysctl
|
||||||
|
+ - const: syscon
|
||||||
|
+ - const: simple-mfd
|
||||||
|
+
|
||||||
|
+ ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ "^gpio@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../gpio/brcm,bcm6345-gpio.yaml"
|
||||||
|
+ description:
|
||||||
|
+ GPIO controller for the SoC GPIOs. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
|
||||||
|
+
|
||||||
|
+ "^pinctrl@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml"
|
||||||
|
+ description:
|
||||||
|
+ Pin controller for the SoC pins. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml.
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - "#address-cells"
|
||||||
|
+ - compatible
|
||||||
|
+ - ranges
|
||||||
|
+ - reg
|
||||||
|
+ - "#size-cells"
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ syscon@fffe0080 {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd";
|
||||||
|
+ reg = <0xfffe0080 0x80>;
|
||||||
|
+ ranges = <0 0xfffe0080 0x80>;
|
||||||
|
+
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm6358-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 40>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl: pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6358-pinctrl";
|
||||||
|
+ reg = <0x18 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_ebi_cs: ebi_cs-pins {
|
||||||
|
+ function = "ebi_cs";
|
||||||
|
+ groups = "ebi_cs_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1: uart1-pins {
|
||||||
|
+ function = "uart1";
|
||||||
|
+ groups = "uart1_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ function = "serial_led";
|
||||||
|
+ groups = "serial_led_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_legacy_led: legacy_led-pins {
|
||||||
|
+ function = "legacy_led";
|
||||||
|
+ groups = "legacy_led_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_led: led-pins {
|
||||||
|
+ function = "led";
|
||||||
|
+ groups = "led_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs_23: spi_cs-pins {
|
||||||
|
+ function = "spi_cs";
|
||||||
|
+ groups = "spi_cs_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_utopia: utopia-pins {
|
||||||
|
+ function = "utopia";
|
||||||
|
+ groups = "utopia_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
|
||||||
|
+ function = "pwm_syn_clk";
|
||||||
|
+ groups = "pwm_syn_clk_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_sys_irq: sys_irq-pins {
|
||||||
|
+ function = "sys_irq";
|
||||||
|
+ groups = "sys_irq_grp";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
From b0e1ebc79a6d7f84f71a758f5a504c8cf954e2e0 Mon Sep 17 00:00:00 2001
|
From 9494b16976e1ae3afc643abf638a25f2ce4c3f2b Mon Sep 17 00:00:00 2001
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
Date: Fri, 24 Jun 2016 22:16:01 +0200
|
Date: Wed, 24 Mar 2021 09:19:11 +0100
|
||||||
Subject: [PATCH 04/12] pinctrl: add a pincontrol driver for BCM6358
|
Subject: [PATCH 10/22] pinctrl: add a pincontrol driver for BCM6358
|
||||||
MIME-Version: 1.0
|
MIME-Version: 1.0
|
||||||
Content-Type: text/plain; charset=UTF-8
|
Content-Type: text/plain; charset=UTF-8
|
||||||
Content-Transfer-Encoding: 8bit
|
Content-Transfer-Encoding: 8bit
|
||||||
@@ -12,28 +12,28 @@ pins but only whole groups. These groups may overlap, and still require
|
|||||||
the directions to be set correctly in the GPIO register. In addition the
|
the directions to be set correctly in the GPIO register. In addition the
|
||||||
functions register controls other, not directly mux related functions.
|
functions register controls other, not directly mux related functions.
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
---
|
---
|
||||||
drivers/pinctrl/bcm/Kconfig | 11 +
|
drivers/pinctrl/bcm/Kconfig | 8 +
|
||||||
drivers/pinctrl/bcm/Makefile | 1 +
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
drivers/pinctrl/bcm/pinctrl-bcm6358.c | 526 ++++++++++++++++++++++++++
|
drivers/pinctrl/bcm/pinctrl-bcm6358.c | 369 ++++++++++++++++++++++++++
|
||||||
3 files changed, 538 insertions(+)
|
3 files changed, 378 insertions(+)
|
||||||
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6358.c
|
||||||
|
|
||||||
--- a/drivers/pinctrl/bcm/Kconfig
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
+++ b/drivers/pinctrl/bcm/Kconfig
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
@@ -40,6 +40,17 @@ config PINCTRL_BCM6328
|
@@ -44,6 +44,14 @@ config PINCTRL_BCM6328
|
||||||
help
|
help
|
||||||
Say Y here to enable the Broadcom BCM6328 GPIO driver.
|
Say Y here to enable the Broadcom BCM6328 GPIO driver.
|
||||||
|
|
||||||
+config PINCTRL_BCM6358
|
+config PINCTRL_BCM6358
|
||||||
+ bool "Broadcom BCM6358 GPIO driver"
|
+ bool "Broadcom BCM6358 GPIO driver"
|
||||||
+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
+ select PINMUX
|
+ select PINCTRL_BCM63XX
|
||||||
+ select PINCONF
|
|
||||||
+ select GENERIC_PINCONF
|
|
||||||
+ select MFD_SYSCON
|
|
||||||
+ default BMIPS_GENERIC
|
+ default BMIPS_GENERIC
|
||||||
+ help
|
+ help
|
||||||
+ Say Y here to enable the Broadcom BCM6358 GPIO driver.
|
+ Say Y here to enable the Broadcom BCM6358 GPIO driver.
|
||||||
@@ -43,9 +43,9 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
||||||
--- a/drivers/pinctrl/bcm/Makefile
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
+++ b/drivers/pinctrl/bcm/Makefile
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
@@ -4,6 +4,7 @@
|
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct
|
||||||
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
|
|
||||||
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
||||||
|
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
||||||
+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
||||||
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
|
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
|
||||||
@@ -53,7 +53,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6358.c
|
||||||
@@ -0,0 +1,526 @@
|
@@ -0,0 +1,369 @@
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
+/*
|
+/*
|
||||||
+ * Driver for BCM6358 GPIO unit (pinctrl + GPIO)
|
+ * Driver for BCM6358 GPIO unit (pinctrl + GPIO)
|
||||||
@@ -62,46 +62,33 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
+ */
|
+ */
|
||||||
+
|
+
|
||||||
+#include <linux/bitops.h>
|
+#include <linux/bits.h>
|
||||||
+#include <linux/gpio.h>
|
+#include <linux/gpio/driver.h>
|
||||||
+#include <linux/kernel.h>
|
+#include <linux/kernel.h>
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/of.h>
|
+#include <linux/of.h>
|
||||||
+#include <linux/of_gpio.h>
|
+#include <linux/pinctrl/pinmux.h>
|
||||||
+#include <linux/of_irq.h>
|
|
||||||
+#include <linux/platform_device.h>
|
+#include <linux/platform_device.h>
|
||||||
+#include <linux/regmap.h>
|
+#include <linux/regmap.h>
|
||||||
+
|
+
|
||||||
+#include <linux/pinctrl/machine.h>
|
|
||||||
+#include <linux/pinctrl/pinconf.h>
|
|
||||||
+#include <linux/pinctrl/pinconf-generic.h>
|
|
||||||
+#include <linux/pinctrl/pinmux.h>
|
|
||||||
+
|
|
||||||
+#include "../core.h"
|
|
||||||
+#include "../pinctrl-utils.h"
|
+#include "../pinctrl-utils.h"
|
||||||
+
|
+
|
||||||
+#define MODULE_NAME "bcm6358-pinctrl"
|
+#include "pinctrl-bcm63xx.h"
|
||||||
+#define BCM6358_NUM_GPIOS 40
|
|
||||||
+
|
+
|
||||||
+#define BANK_SIZE sizeof(uint32_t)
|
+#define BCM6358_NUM_GPIOS 40
|
||||||
+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
|
|
||||||
+
|
+
|
||||||
+#define BCM6358_DIROUT_REG 0x04
|
+#define BCM6358_MODE_REG 0x18
|
||||||
+#define BCM6358_DATA_REG 0x0c
|
+#define BCM6358_MODE_MUX_NONE 0
|
||||||
+#define BCM6358_MODE_REG 0x18
|
+#define BCM6358_MODE_MUX_EBI_CS BIT(5)
|
||||||
+
|
+#define BCM6358_MODE_MUX_UART1 BIT(6)
|
||||||
+#define BCM6358_MODE_MUX_NONE 0
|
+#define BCM6358_MODE_MUX_SPI_CS BIT(7)
|
||||||
+#define BCM6358_MODE_MUX_EBI_CS BIT(5)
|
+#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8)
|
||||||
+#define BCM6358_MODE_MUX_UART1 BIT(6)
|
+#define BCM6358_MODE_MUX_LEGACY_LED BIT(9)
|
||||||
+#define BCM6358_MODE_MUX_SPI_CS BIT(7)
|
+#define BCM6358_MODE_MUX_SERIAL_LED BIT(10)
|
||||||
+#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8)
|
+#define BCM6358_MODE_MUX_LED BIT(11)
|
||||||
+#define BCM6358_MODE_MUX_LEGACY_LED BIT(9)
|
+#define BCM6358_MODE_MUX_UTOPIA BIT(12)
|
||||||
+#define BCM6358_MODE_MUX_SERIAL_LED BIT(10)
|
+#define BCM6358_MODE_MUX_CLKRST BIT(13)
|
||||||
+#define BCM6358_MODE_MUX_LED BIT(11)
|
+#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14)
|
||||||
+#define BCM6358_MODE_MUX_UTOPIA BIT(12)
|
+#define BCM6358_MODE_MUX_SYS_IRQ BIT(15)
|
||||||
+#define BCM6358_MODE_MUX_CLKRST BIT(13)
|
|
||||||
+#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14)
|
|
||||||
+#define BCM6358_MODE_MUX_SYS_IRQ BIT(15)
|
|
||||||
+
|
+
|
||||||
+struct bcm6358_pingroup {
|
+struct bcm6358_pingroup {
|
||||||
+ const char *name;
|
+ const char *name;
|
||||||
@@ -120,15 +107,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ const unsigned num_groups;
|
+ const unsigned num_groups;
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+struct bcm6358_pinctrl {
|
+struct bcm6358_priv {
|
||||||
+ struct device *dev;
|
|
||||||
+ struct regmap *regs;
|
|
||||||
+ struct regmap_field *overlays;
|
+ struct regmap_field *overlays;
|
||||||
+
|
|
||||||
+ struct pinctrl_dev *pctl_dev;
|
|
||||||
+ struct gpio_chip gpio_chip;
|
|
||||||
+ struct pinctrl_desc pctl_desc;
|
|
||||||
+ struct pinctrl_gpio_range gpio_range;
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \
|
+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \
|
||||||
@@ -287,108 +267,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ BCM6358_FUN(sys_irq),
|
+ BCM6358_FUN(sys_irq),
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6358_bank_pin(unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return pin % PINS_PER_BANK;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm6358_reg_off(unsigned int reg, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6358_gpio_direction_input(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6358_bank_pin(pin);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an input GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6358_gpio_direction_output(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin, int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin);
|
|
||||||
+ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6358_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an output GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin));
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6358_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6358_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, data, &val);
|
|
||||||
+
|
|
||||||
+ return !!(val & BIT(bank_pin));
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6358_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6358_reg_off(BCM6358_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6358_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, dirout, &val);
|
|
||||||
+
|
|
||||||
+ if (val & BIT(bank_pin))
|
|
||||||
+ return GPIO_LINE_DIRECTION_OUT;
|
|
||||||
+
|
|
||||||
+ return GPIO_LINE_DIRECTION_IN;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void bcm6358_gpio_set(struct gpio_chip *chip, unsigned int pin,
|
|
||||||
+ int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6358_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6358_reg_off(BCM6358_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6358_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6358_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
||||||
+{
|
|
||||||
+ char irq_name[7];
|
|
||||||
+
|
|
||||||
+ sprintf(irq_name, "gpio%d", gpio);
|
|
||||||
+
|
|
||||||
+ return of_irq_get_byname(chip->of_node, irq_name);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
||||||
+{
|
+{
|
||||||
+ return ARRAY_SIZE(bcm6358_groups);
|
+ return ARRAY_SIZE(bcm6358_groups);
|
||||||
@@ -435,7 +313,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
||||||
+ unsigned selector, unsigned group)
|
+ unsigned selector, unsigned group)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6358_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
|
+ struct bcm6358_priv *priv = pc->driver_data;
|
||||||
+ const struct bcm6358_pingroup *pg = &bcm6358_groups[group];
|
+ const struct bcm6358_pingroup *pg = &bcm6358_groups[group];
|
||||||
+ unsigned int val = pg->mode_val;
|
+ unsigned int val = pg->mode_val;
|
||||||
+ unsigned int mask = val;
|
+ unsigned int mask = val;
|
||||||
@@ -444,16 +323,21 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ for (pin = 0; pin < pg->num_pins; pin++)
|
+ for (pin = 0; pin < pg->num_pins; pin++)
|
||||||
+ mask |= (unsigned long)bcm6358_pins[pin].drv_data;
|
+ mask |= (unsigned long)bcm6358_pins[pin].drv_data;
|
||||||
+
|
+
|
||||||
+ regmap_field_update_bits(pc->overlays, mask, val);
|
+ regmap_field_update_bits(priv->overlays, mask, val);
|
||||||
+
|
+
|
||||||
+ for (pin = 0; pin < pg->num_pins; pin++) {
|
+ for (pin = 0; pin < pg->num_pins; pin++) {
|
||||||
+ int hw_gpio = bcm6358_pins[pin].number;
|
+ struct pinctrl_gpio_range *range;
|
||||||
+ struct gpio_chip *gc = &pc->gpio_chip;
|
+ unsigned int hw_gpio = bcm6358_pins[pin].number;
|
||||||
+
|
+
|
||||||
+ if (pg->direction & BIT(pin))
|
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
|
||||||
+ gc->direction_output(gc, hw_gpio, 0);
|
+ if (range) {
|
||||||
+ else
|
+ struct gpio_chip *gc = range->gc;
|
||||||
+ gc->direction_input(gc, hw_gpio);
|
+
|
||||||
|
+ if (pg->direction & BIT(pin))
|
||||||
|
+ gc->direction_output(gc, hw_gpio, 0);
|
||||||
|
+ else
|
||||||
|
+ gc->direction_input(gc, hw_gpio);
|
||||||
|
+ }
|
||||||
+ }
|
+ }
|
||||||
+
|
+
|
||||||
+ return 0;
|
+ return 0;
|
||||||
@@ -463,7 +347,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ struct pinctrl_gpio_range *range,
|
+ struct pinctrl_gpio_range *range,
|
||||||
+ unsigned offset)
|
+ unsigned offset)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6358_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
|
+ struct bcm6358_priv *priv = pc->driver_data;
|
||||||
+ unsigned int mask;
|
+ unsigned int mask;
|
||||||
+
|
+
|
||||||
+ mask = (unsigned long) bcm6358_pins[offset].drv_data;
|
+ mask = (unsigned long) bcm6358_pins[offset].drv_data;
|
||||||
@@ -471,110 +356,68 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ return 0;
|
+ return 0;
|
||||||
+
|
+
|
||||||
+ /* disable all functions using this pin */
|
+ /* disable all functions using this pin */
|
||||||
+ return regmap_field_update_bits(pc->overlays, mask, 0);
|
+ return regmap_field_update_bits(priv->overlays, mask, 0);
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static struct pinctrl_ops bcm6358_pctl_ops = {
|
+static struct pinctrl_ops bcm6358_pctl_ops = {
|
||||||
+ .get_groups_count = bcm6358_pinctrl_get_group_count,
|
+ .dt_free_map = pinctrl_utils_free_map,
|
||||||
|
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
||||||
+ .get_group_name = bcm6358_pinctrl_get_group_name,
|
+ .get_group_name = bcm6358_pinctrl_get_group_name,
|
||||||
+ .get_group_pins = bcm6358_pinctrl_get_group_pins,
|
+ .get_group_pins = bcm6358_pinctrl_get_group_pins,
|
||||||
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
+ .get_groups_count = bcm6358_pinctrl_get_group_count,
|
||||||
+ .dt_free_map = pinctrl_utils_free_map,
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct pinmux_ops bcm6358_pmx_ops = {
|
+static struct pinmux_ops bcm6358_pmx_ops = {
|
||||||
+ .get_functions_count = bcm6358_pinctrl_get_func_count,
|
|
||||||
+ .get_function_name = bcm6358_pinctrl_get_func_name,
|
|
||||||
+ .get_function_groups = bcm6358_pinctrl_get_groups,
|
+ .get_function_groups = bcm6358_pinctrl_get_groups,
|
||||||
+ .set_mux = bcm6358_pinctrl_set_mux,
|
+ .get_function_name = bcm6358_pinctrl_get_func_name,
|
||||||
|
+ .get_functions_count = bcm6358_pinctrl_get_func_count,
|
||||||
+ .gpio_request_enable = bcm6358_gpio_request_enable,
|
+ .gpio_request_enable = bcm6358_gpio_request_enable,
|
||||||
|
+ .set_mux = bcm6358_pinctrl_set_mux,
|
||||||
+ .strict = true,
|
+ .strict = true,
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
|
+static const struct bcm63xx_pinctrl_soc bcm6358_soc = {
|
||||||
|
+ .ngpios = BCM6358_NUM_GPIOS,
|
||||||
|
+ .npins = ARRAY_SIZE(bcm6358_pins),
|
||||||
|
+ .pctl_ops = &bcm6358_pctl_ops,
|
||||||
|
+ .pins = bcm6358_pins,
|
||||||
|
+ .pmx_ops = &bcm6358_pmx_ops,
|
||||||
|
+};
|
||||||
|
+
|
||||||
+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
|
+static int bcm6358_pinctrl_probe(struct platform_device *pdev)
|
||||||
+{
|
+{
|
||||||
+ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15);
|
+ struct reg_field overlays = REG_FIELD(BCM6358_MODE_REG, 0, 15);
|
||||||
+ struct device *dev = &pdev->dev;
|
+ struct device *dev = &pdev->dev;
|
||||||
+ struct device_node *np = dev->of_node;
|
+ struct bcm63xx_pinctrl *pc;
|
||||||
+ struct bcm6358_pinctrl *pc;
|
+ struct bcm6358_priv *priv;
|
||||||
+ int err;
|
+ int err;
|
||||||
+
|
+
|
||||||
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||||
+ if (!pc)
|
+ if (!priv)
|
||||||
+ return -ENOMEM;
|
+ return -ENOMEM;
|
||||||
+
|
+
|
||||||
+ platform_set_drvdata(pdev, pc);
|
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6358_soc, (void *) priv);
|
||||||
+ pc->dev = dev;
|
+ if (err)
|
||||||
+
|
|
||||||
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
|
||||||
+ if (IS_ERR(pc->regs))
|
|
||||||
+ return PTR_ERR(pc->regs);
|
|
||||||
+
|
|
||||||
+ pc->overlays = devm_regmap_field_alloc(&pdev->dev, pc->regs, overlays);
|
|
||||||
+ if (IS_ERR(pc->overlays))
|
|
||||||
+ return PTR_ERR(pc->overlays);
|
|
||||||
+
|
|
||||||
+ /* disable all muxes by default */
|
|
||||||
+ regmap_field_write(pc->overlays, 0);
|
|
||||||
+
|
|
||||||
+ pc->gpio_chip.label = MODULE_NAME;
|
|
||||||
+ pc->gpio_chip.owner = THIS_MODULE;
|
|
||||||
+ pc->gpio_chip.request = gpiochip_generic_request;
|
|
||||||
+ pc->gpio_chip.free = gpiochip_generic_free;
|
|
||||||
+ pc->gpio_chip.direction_input = bcm6358_gpio_direction_input;
|
|
||||||
+ pc->gpio_chip.direction_output = bcm6358_gpio_direction_output;
|
|
||||||
+ pc->gpio_chip.get_direction = bcm6358_gpio_get_direction;
|
|
||||||
+ pc->gpio_chip.get = bcm6358_gpio_get;
|
|
||||||
+ pc->gpio_chip.set = bcm6358_gpio_set;
|
|
||||||
+ pc->gpio_chip.set_config = gpiochip_generic_config;
|
|
||||||
+ pc->gpio_chip.base = -1;
|
|
||||||
+ pc->gpio_chip.ngpio = BCM6358_NUM_GPIOS;
|
|
||||||
+ pc->gpio_chip.can_sleep = false;
|
|
||||||
+ pc->gpio_chip.parent = dev;
|
|
||||||
+ pc->gpio_chip.of_node = np;
|
|
||||||
+
|
|
||||||
+ if (of_get_property(np, "interrupt-names", NULL))
|
|
||||||
+ pc->gpio_chip.to_irq = bcm6358_gpio_to_irq;
|
|
||||||
+
|
|
||||||
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
||||||
+ if (err) {
|
|
||||||
+ dev_err(dev, "could not add GPIO chip\n");
|
|
||||||
+ return err;
|
+ return err;
|
||||||
+ }
|
|
||||||
+
|
+
|
||||||
+ pc->pctl_desc.name = MODULE_NAME,
|
+ pc = platform_get_drvdata(pdev);
|
||||||
+ pc->pctl_desc.pins = bcm6358_pins,
|
|
||||||
+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6358_pins),
|
|
||||||
+ pc->pctl_desc.pctlops = &bcm6358_pctl_ops,
|
|
||||||
+ pc->pctl_desc.pmxops = &bcm6358_pmx_ops,
|
|
||||||
+ pc->pctl_desc.owner = THIS_MODULE,
|
|
||||||
+
|
+
|
||||||
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
|
||||||
+ if (IS_ERR(pc->pctl_dev)) {
|
+ if (IS_ERR(priv->overlays))
|
||||||
+ gpiochip_remove(&pc->gpio_chip);
|
+ return PTR_ERR(priv->overlays);
|
||||||
+ return PTR_ERR(pc->pctl_dev);
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->gpio_range.name = MODULE_NAME;
|
|
||||||
+ pc->gpio_range.npins = BCM6358_NUM_GPIOS;
|
|
||||||
+ pc->gpio_range.base = pc->gpio_chip.base;
|
|
||||||
+ pc->gpio_range.gc = &pc->gpio_chip;
|
|
||||||
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
||||||
+
|
|
||||||
+ dev_info(dev, "registered\n");
|
|
||||||
+
|
+
|
||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static const struct of_device_id bcm6358_pinctrl_match[] = {
|
+static const struct of_device_id bcm6358_pinctrl_match[] = {
|
||||||
+ { .compatible = "brcm,bcm6358-pinctrl", },
|
+ { .compatible = "brcm,bcm6358-pinctrl", },
|
||||||
+ { },
|
+ { /* sentinel */ }
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct platform_driver bcm6358_pinctrl_driver = {
|
+static struct platform_driver bcm6358_pinctrl_driver = {
|
||||||
+ .probe = bcm6358_pinctrl_probe,
|
+ .probe = bcm6358_pinctrl_probe,
|
||||||
+ .driver = {
|
+ .driver = {
|
||||||
+ .name = MODULE_NAME,
|
+ .name = "bcm6358-pinctrl",
|
||||||
+ .of_match_table = bcm6358_pinctrl_match,
|
+ .of_match_table = bcm6358_pinctrl_match,
|
||||||
+ },
|
+ },
|
||||||
+};
|
+};
|
||||||
@@ -0,0 +1,231 @@
|
|||||||
|
From 6e4b5e1fc77513359989112e002e08553d0d8d5c Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:12 +0100
|
||||||
|
Subject: [PATCH 11/22] dt-bindings: add BCM6362 pincontroller binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the pincontrol core found in BCM6362 SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-12-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../pinctrl/brcm,bcm6362-pinctrl.yaml | 206 ++++++++++++++++++
|
||||||
|
1 file changed, 206 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
|
||||||
|
@@ -0,0 +1,206 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6362 pin controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Bindings for Broadcom's BCM6362 memory-mapped pin controller.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ const: brcm,bcm6362-pinctrl
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 2
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ '-pins$':
|
||||||
|
+ type: object
|
||||||
|
+ $ref: pinmux-node.yaml#
|
||||||
|
+
|
||||||
|
+ properties:
|
||||||
|
+ function:
|
||||||
|
+ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
|
||||||
|
+ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
|
||||||
|
+ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
|
||||||
|
+ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
|
||||||
|
+ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
|
||||||
|
+ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
|
||||||
|
+ ext_irq2, ext_irq3, nand ]
|
||||||
|
+
|
||||||
|
+ pins:
|
||||||
|
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
|
||||||
|
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
|
||||||
|
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
|
||||||
|
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6362-pinctrl";
|
||||||
|
+ reg = <0x18 0x10>, <0x38 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
|
+ function = "usb_device_led";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_sys_irq: sys_irq-pins {
|
||||||
|
+ function = "sys_irq";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio2";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio3";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
|
+ function = "robosw_led_data";
|
||||||
|
+ pins = "gpio4";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
|
+ function = "robosw_led_clk";
|
||||||
|
+ pins = "gpio5";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led0: robosw_led0-pins {
|
||||||
|
+ function = "robosw_led0";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led1: robosw_led1-pins {
|
||||||
|
+ function = "robosw_led1";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_led: inet_led-pins {
|
||||||
|
+ function = "inet_led";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs2: spi_cs2-pins {
|
||||||
|
+ function = "spi_cs2";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs3: spi_cs3-pins {
|
||||||
|
+ function = "spi_cs3";
|
||||||
|
+ pins = "gpio10";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ntr_pulse: ntr_pulse-pins {
|
||||||
|
+ function = "ntr_pulse";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1_scts: uart1_scts-pins {
|
||||||
|
+ function = "uart1_scts";
|
||||||
|
+ pins = "gpio12";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1_srts: uart1_srts-pins {
|
||||||
|
+ function = "uart1_srts";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1: uart1-pins {
|
||||||
|
+ pinctrl_uart1_sdin: uart1_sdin-pins {
|
||||||
|
+ function = "uart1_sdin";
|
||||||
|
+ pins = "gpio14";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1_sdout: uart1_sdout-pins {
|
||||||
|
+ function = "uart1_sdout";
|
||||||
|
+ pins = "gpio15";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi: adsl_spi-pins {
|
||||||
|
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
||||||
|
+ function = "adsl_spi_miso";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
||||||
|
+ function = "adsl_spi_mosi";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
|
||||||
|
+ function = "adsl_spi_clk";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
|
||||||
|
+ function = "adsl_spi_cs";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_led: ephy0_led-pins {
|
||||||
|
+ function = "ephy0_led";
|
||||||
|
+ pins = "gpio20";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_led: ephy1_led-pins {
|
||||||
|
+ function = "ephy1_led";
|
||||||
|
+ pins = "gpio21";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_led: ephy2_led-pins {
|
||||||
|
+ function = "ephy2_led";
|
||||||
|
+ pins = "gpio22";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_led: ephy3_led-pins {
|
||||||
|
+ function = "ephy3_led";
|
||||||
|
+ pins = "gpio23";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq0: ext_irq0-pins {
|
||||||
|
+ function = "ext_irq0";
|
||||||
|
+ pins = "gpio24";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq1: ext_irq1-pins {
|
||||||
|
+ function = "ext_irq1";
|
||||||
|
+ pins = "gpio25";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq2: ext_irq2-pins {
|
||||||
|
+ function = "ext_irq2";
|
||||||
|
+ pins = "gpio26";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq3: ext_irq3-pins {
|
||||||
|
+ function = "ext_irq3";
|
||||||
|
+ pins = "gpio27";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_nand: nand-pins {
|
||||||
|
+ function = "nand";
|
||||||
|
+ group = "nand_grp";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,259 @@
|
|||||||
|
From 7ca989eafbd6ce1c216a775556c4893baab1959b Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:13 +0100
|
||||||
|
Subject: [PATCH 12/22] dt-bindings: add BCM6362 GPIO sysctl binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the GPIO sysctl found in BCM6362 SoCs.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-13-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../mfd/brcm,bcm6362-gpio-sysctl.yaml | 236 ++++++++++++++++++
|
||||||
|
1 file changed, 236 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
|
||||||
|
@@ -0,0 +1,236 @@
|
||||||
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Broadcom BCM6362 SoC GPIO system controller which provides a register map
|
||||||
|
+ for controlling the GPIO and pins of the SoC.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ "#address-cells": true
|
||||||
|
+
|
||||||
|
+ "#size-cells": true
|
||||||
|
+
|
||||||
|
+ compatible:
|
||||||
|
+ items:
|
||||||
|
+ - const: brcm,bcm6362-gpio-sysctl
|
||||||
|
+ - const: syscon
|
||||||
|
+ - const: simple-mfd
|
||||||
|
+
|
||||||
|
+ ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ "^gpio@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../gpio/brcm,bcm6345-gpio.yaml"
|
||||||
|
+ description:
|
||||||
|
+ GPIO controller for the SoC GPIOs. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
|
||||||
|
+
|
||||||
|
+ "^pinctrl@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml"
|
||||||
|
+ description:
|
||||||
|
+ Pin controller for the SoC pins. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml.
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - "#address-cells"
|
||||||
|
+ - compatible
|
||||||
|
+ - ranges
|
||||||
|
+ - reg
|
||||||
|
+ - "#size-cells"
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ syscon@10000080 {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd";
|
||||||
|
+ reg = <0x10000080 0x80>;
|
||||||
|
+ ranges = <0 0x10000080 0x80>;
|
||||||
|
+
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm6362-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 48>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl: pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6362-pinctrl";
|
||||||
|
+ reg = <0x18 0x10>, <0x38 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
|
+ function = "usb_device_led";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_sys_irq: sys_irq-pins {
|
||||||
|
+ function = "sys_irq";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio2";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio3";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
|
+ function = "robosw_led_data";
|
||||||
|
+ pins = "gpio4";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
|
+ function = "robosw_led_clk";
|
||||||
|
+ pins = "gpio5";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led0: robosw_led0-pins {
|
||||||
|
+ function = "robosw_led0";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led1: robosw_led1-pins {
|
||||||
|
+ function = "robosw_led1";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_led: inet_led-pins {
|
||||||
|
+ function = "inet_led";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs2: spi_cs2-pins {
|
||||||
|
+ function = "spi_cs2";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs3: spi_cs3-pins {
|
||||||
|
+ function = "spi_cs3";
|
||||||
|
+ pins = "gpio10";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ntr_pulse: ntr_pulse-pins {
|
||||||
|
+ function = "ntr_pulse";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1_scts: uart1_scts-pins {
|
||||||
|
+ function = "uart1_scts";
|
||||||
|
+ pins = "gpio12";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1_srts: uart1_srts-pins {
|
||||||
|
+ function = "uart1_srts";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1: uart1-pins {
|
||||||
|
+ pinctrl_uart1_sdin: uart1_sdin-pins {
|
||||||
|
+ function = "uart1_sdin";
|
||||||
|
+ pins = "gpio14";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1_sdout: uart1_sdout-pins {
|
||||||
|
+ function = "uart1_sdout";
|
||||||
|
+ pins = "gpio15";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi: adsl_spi-pins {
|
||||||
|
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
||||||
|
+ function = "adsl_spi_miso";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
||||||
|
+ function = "adsl_spi_mosi";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
|
||||||
|
+ function = "adsl_spi_clk";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
|
||||||
|
+ function = "adsl_spi_cs";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_led: ephy0_led-pins {
|
||||||
|
+ function = "ephy0_led";
|
||||||
|
+ pins = "gpio20";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_led: ephy1_led-pins {
|
||||||
|
+ function = "ephy1_led";
|
||||||
|
+ pins = "gpio21";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_led: ephy2_led-pins {
|
||||||
|
+ function = "ephy2_led";
|
||||||
|
+ pins = "gpio22";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_led: ephy3_led-pins {
|
||||||
|
+ function = "ephy3_led";
|
||||||
|
+ pins = "gpio23";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq0: ext_irq0-pins {
|
||||||
|
+ function = "ext_irq0";
|
||||||
|
+ pins = "gpio24";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq1: ext_irq1-pins {
|
||||||
|
+ function = "ext_irq1";
|
||||||
|
+ pins = "gpio25";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq2: ext_irq2-pins {
|
||||||
|
+ function = "ext_irq2";
|
||||||
|
+ pins = "gpio26";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ext_irq3: ext_irq3-pins {
|
||||||
|
+ function = "ext_irq3";
|
||||||
|
+ pins = "gpio27";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_nand: nand-pins {
|
||||||
|
+ function = "nand";
|
||||||
|
+ group = "nand_grp";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
From 2872fcb5eac02d3a74d696e6350410a9e66281b4 Mon Sep 17 00:00:00 2001
|
From 705791e23ecd93d6c2697234fdf0c22b499c0a5b Mon Sep 17 00:00:00 2001
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
Date: Fri, 24 Jun 2016 22:17:20 +0200
|
Date: Wed, 24 Mar 2021 09:19:14 +0100
|
||||||
Subject: [PATCH 06/12] pinctrl: add a pincontrol driver for BCM6362
|
Subject: [PATCH 13/22] pinctrl: add a pincontrol driver for BCM6362
|
||||||
MIME-Version: 1.0
|
MIME-Version: 1.0
|
||||||
Content-Type: text/plain; charset=UTF-8
|
Content-Type: text/plain; charset=UTF-8
|
||||||
Content-Transfer-Encoding: 8bit
|
Content-Transfer-Encoding: 8bit
|
||||||
@@ -11,28 +11,28 @@ GPIO pins to the LED controller, to be available by the integrated
|
|||||||
wifi, or other functions. It also supports overlay groups, of which
|
wifi, or other functions. It also supports overlay groups, of which
|
||||||
only NAND is documented.
|
only NAND is documented.
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
---
|
---
|
||||||
drivers/pinctrl/bcm/Kconfig | 11 +
|
drivers/pinctrl/bcm/Kconfig | 8 +
|
||||||
drivers/pinctrl/bcm/Makefile | 1 +
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
drivers/pinctrl/bcm/pinctrl-bcm6362.c | 794 ++++++++++++++++++++++++++
|
drivers/pinctrl/bcm/pinctrl-bcm6362.c | 617 ++++++++++++++++++++++++++
|
||||||
3 files changed, 806 insertions(+)
|
3 files changed, 626 insertions(+)
|
||||||
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6362.c
|
||||||
|
|
||||||
--- a/drivers/pinctrl/bcm/Kconfig
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
+++ b/drivers/pinctrl/bcm/Kconfig
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
@@ -51,6 +51,17 @@ config PINCTRL_BCM6358
|
@@ -52,6 +52,14 @@ config PINCTRL_BCM6358
|
||||||
help
|
help
|
||||||
Say Y here to enable the Broadcom BCM6358 GPIO driver.
|
Say Y here to enable the Broadcom BCM6358 GPIO driver.
|
||||||
|
|
||||||
+config PINCTRL_BCM6362
|
+config PINCTRL_BCM6362
|
||||||
+ bool "Broadcom BCM6362 GPIO driver"
|
+ bool "Broadcom BCM6362 GPIO driver"
|
||||||
+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
+ select PINMUX
|
+ select PINCTRL_BCM63XX
|
||||||
+ select PINCONF
|
|
||||||
+ select GENERIC_PINCONF
|
|
||||||
+ select MFD_SYSCON
|
|
||||||
+ default BMIPS_GENERIC
|
+ default BMIPS_GENERIC
|
||||||
+ help
|
+ help
|
||||||
+ Say Y here to enable the Broadcom BCM6362 GPIO driver.
|
+ Say Y here to enable the Broadcom BCM6362 GPIO driver.
|
||||||
@@ -42,8 +42,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
||||||
--- a/drivers/pinctrl/bcm/Makefile
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
+++ b/drivers/pinctrl/bcm/Makefile
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct
|
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctr
|
||||||
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
||||||
+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
||||||
@@ -52,7 +52,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6362.c
|
||||||
@@ -0,0 +1,794 @@
|
@@ -0,0 +1,617 @@
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
+/*
|
+/*
|
||||||
+ * Driver for BCM6362 GPIO unit (pinctrl + GPIO)
|
+ * Driver for BCM6362 GPIO unit (pinctrl + GPIO)
|
||||||
@@ -61,33 +61,22 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
+ */
|
+ */
|
||||||
+
|
+
|
||||||
+#include <linux/bitops.h>
|
+#include <linux/bits.h>
|
||||||
+#include <linux/gpio.h>
|
+#include <linux/gpio/driver.h>
|
||||||
+#include <linux/kernel.h>
|
+#include <linux/kernel.h>
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/of.h>
|
+#include <linux/of.h>
|
||||||
+#include <linux/of_gpio.h>
|
+#include <linux/pinctrl/pinmux.h>
|
||||||
+#include <linux/of_irq.h>
|
|
||||||
+#include <linux/platform_device.h>
|
+#include <linux/platform_device.h>
|
||||||
+#include <linux/regmap.h>
|
+#include <linux/regmap.h>
|
||||||
+
|
+
|
||||||
+#include <linux/pinctrl/machine.h>
|
|
||||||
+#include <linux/pinctrl/pinconf.h>
|
|
||||||
+#include <linux/pinctrl/pinconf-generic.h>
|
|
||||||
+#include <linux/pinctrl/pinmux.h>
|
|
||||||
+
|
|
||||||
+#include "../core.h"
|
|
||||||
+#include "../pinctrl-utils.h"
|
+#include "../pinctrl-utils.h"
|
||||||
+
|
+
|
||||||
+#define MODULE_NAME "bcm6362-pinctrl"
|
+#include "pinctrl-bcm63xx.h"
|
||||||
|
+
|
||||||
|
+#define BCM6362_BANK_GPIOS 32
|
||||||
+#define BCM6362_NUM_GPIOS 48
|
+#define BCM6362_NUM_GPIOS 48
|
||||||
+#define BCM6362_NUM_LEDS 24
|
+#define BCM6362_NUM_LEDS 24
|
||||||
+
|
+
|
||||||
+#define BANK_SIZE sizeof(uint32_t)
|
|
||||||
+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
|
|
||||||
+
|
|
||||||
+#define BCM6362_DIROUT_REG 0x04
|
|
||||||
+#define BCM6362_DATA_REG 0x0c
|
|
||||||
+#define BCM6362_LED_REG 0x10
|
+#define BCM6362_LED_REG 0x10
|
||||||
+#define BCM6362_MODE_REG 0x18
|
+#define BCM6362_MODE_REG 0x18
|
||||||
+#define BCM6362_CTRL_REG 0x1c
|
+#define BCM6362_CTRL_REG 0x1c
|
||||||
@@ -116,16 +105,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ uint32_t basemode_mask;
|
+ uint32_t basemode_mask;
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+struct bcm6362_pinctrl {
|
|
||||||
+ struct device *dev;
|
|
||||||
+ struct regmap *regs;
|
|
||||||
+
|
|
||||||
+ struct pinctrl_dev *pctl_dev;
|
|
||||||
+ struct gpio_chip gpio_chip;
|
|
||||||
+ struct pinctrl_desc pctl_desc;
|
|
||||||
+ struct pinctrl_gpio_range gpio_range;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+#define BCM6362_PIN(a, b, mask) \
|
+#define BCM6362_PIN(a, b, mask) \
|
||||||
+ { \
|
+ { \
|
||||||
+ .number = a, \
|
+ .number = a, \
|
||||||
@@ -526,108 +505,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
|
+ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND),
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6362_bank_pin(unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return pin % PINS_PER_BANK;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm6362_reg_off(unsigned int reg, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6362_gpio_direction_input(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6362_bank_pin(pin);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an input GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6362_gpio_direction_output(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin, int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin);
|
|
||||||
+ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6362_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an output GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin));
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6362_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6362_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, data, &val);
|
|
||||||
+
|
|
||||||
+ return !!(val & BIT(bank_pin));
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6362_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6362_reg_off(BCM6362_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6362_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, dirout, &val);
|
|
||||||
+
|
|
||||||
+ if (val & BIT(bank_pin))
|
|
||||||
+ return GPIO_LINE_DIRECTION_OUT;
|
|
||||||
+
|
|
||||||
+ return GPIO_LINE_DIRECTION_IN;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void bcm6362_gpio_set(struct gpio_chip *chip, unsigned int pin,
|
|
||||||
+ int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6362_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6362_reg_off(BCM6362_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6362_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6362_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
||||||
+{
|
|
||||||
+ char irq_name[7];
|
|
||||||
+
|
|
||||||
+ sprintf(irq_name, "gpio%d", gpio);
|
|
||||||
+
|
|
||||||
+ return of_irq_get_byname(chip->of_node, irq_name);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
||||||
+{
|
+{
|
||||||
+ return ARRAY_SIZE(bcm6362_groups);
|
+ return ARRAY_SIZE(bcm6362_groups);
|
||||||
@@ -671,16 +548,16 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pc, unsigned pin)
|
+static void bcm6362_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin)
|
||||||
+{
|
+{
|
||||||
+ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
|
+ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin];
|
||||||
+ unsigned int mask = bcm6362_bank_pin(pin);
|
+ unsigned int mask = bcm63xx_bank_pin(pin);
|
||||||
+
|
+
|
||||||
+ if (desc->drv_data)
|
+ if (desc->drv_data)
|
||||||
+ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG,
|
+ regmap_update_bits(pc->regs, BCM6362_BASEMODE_REG,
|
||||||
+ (uint32_t) desc->drv_data, 0);
|
+ (uint32_t) desc->drv_data, 0);
|
||||||
+
|
+
|
||||||
+ if (pin < PINS_PER_BANK) {
|
+ if (pin < BCM63XX_BANK_GPIOS) {
|
||||||
+ /* base mode 0 => gpio 1 => mux function */
|
+ /* base mode 0 => gpio 1 => mux function */
|
||||||
+ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0);
|
+ regmap_update_bits(pc->regs, BCM6362_MODE_REG, mask, 0);
|
||||||
+
|
+
|
||||||
@@ -696,7 +573,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
||||||
+ unsigned selector, unsigned group)
|
+ unsigned selector, unsigned group)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6362_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+ const struct bcm6362_pingroup *pg = &bcm6362_groups[group];
|
+ const struct bcm6362_pingroup *pg = &bcm6362_groups[group];
|
||||||
+ const struct bcm6362_function *f = &bcm6362_funcs[selector];
|
+ const struct bcm6362_function *f = &bcm6362_funcs[selector];
|
||||||
+ unsigned i;
|
+ unsigned i;
|
||||||
@@ -741,7 +618,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ struct pinctrl_gpio_range *range,
|
+ struct pinctrl_gpio_range *range,
|
||||||
+ unsigned offset)
|
+ unsigned offset)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6362_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+
|
+
|
||||||
+ /* disable all functions using this pin */
|
+ /* disable all functions using this pin */
|
||||||
+ bcm6362_set_gpio(pc, offset);
|
+ bcm6362_set_gpio(pc, offset);
|
||||||
@@ -750,98 +627,44 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static struct pinctrl_ops bcm6362_pctl_ops = {
|
+static struct pinctrl_ops bcm6362_pctl_ops = {
|
||||||
+ .get_groups_count = bcm6362_pinctrl_get_group_count,
|
+ .dt_free_map = pinctrl_utils_free_map,
|
||||||
|
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
||||||
+ .get_group_name = bcm6362_pinctrl_get_group_name,
|
+ .get_group_name = bcm6362_pinctrl_get_group_name,
|
||||||
+ .get_group_pins = bcm6362_pinctrl_get_group_pins,
|
+ .get_group_pins = bcm6362_pinctrl_get_group_pins,
|
||||||
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
+ .get_groups_count = bcm6362_pinctrl_get_group_count,
|
||||||
+ .dt_free_map = pinctrl_utils_free_map,
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct pinmux_ops bcm6362_pmx_ops = {
|
+static struct pinmux_ops bcm6362_pmx_ops = {
|
||||||
+ .get_functions_count = bcm6362_pinctrl_get_func_count,
|
|
||||||
+ .get_function_name = bcm6362_pinctrl_get_func_name,
|
|
||||||
+ .get_function_groups = bcm6362_pinctrl_get_groups,
|
+ .get_function_groups = bcm6362_pinctrl_get_groups,
|
||||||
+ .set_mux = bcm6362_pinctrl_set_mux,
|
+ .get_function_name = bcm6362_pinctrl_get_func_name,
|
||||||
|
+ .get_functions_count = bcm6362_pinctrl_get_func_count,
|
||||||
+ .gpio_request_enable = bcm6362_gpio_request_enable,
|
+ .gpio_request_enable = bcm6362_gpio_request_enable,
|
||||||
|
+ .set_mux = bcm6362_pinctrl_set_mux,
|
||||||
+ .strict = true,
|
+ .strict = true,
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
|
+static const struct bcm63xx_pinctrl_soc bcm6362_soc = {
|
||||||
|
+ .ngpios = BCM6362_NUM_GPIOS,
|
||||||
|
+ .npins = ARRAY_SIZE(bcm6362_pins),
|
||||||
|
+ .pctl_ops = &bcm6362_pctl_ops,
|
||||||
|
+ .pins = bcm6362_pins,
|
||||||
|
+ .pmx_ops = &bcm6362_pmx_ops,
|
||||||
|
+};
|
||||||
|
+
|
||||||
+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
|
+static int bcm6362_pinctrl_probe(struct platform_device *pdev)
|
||||||
+{
|
+{
|
||||||
+ struct device *dev = &pdev->dev;
|
+ return bcm63xx_pinctrl_probe(pdev, &bcm6362_soc, NULL);
|
||||||
+ struct device_node *np = dev->of_node;
|
|
||||||
+ struct bcm6362_pinctrl *pc;
|
|
||||||
+ int err;
|
|
||||||
+
|
|
||||||
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
|
||||||
+ if (!pc)
|
|
||||||
+ return -ENOMEM;
|
|
||||||
+
|
|
||||||
+ platform_set_drvdata(pdev, pc);
|
|
||||||
+ pc->dev = dev;
|
|
||||||
+
|
|
||||||
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
|
||||||
+ if (IS_ERR(pc->regs))
|
|
||||||
+ return PTR_ERR(pc->regs);
|
|
||||||
+
|
|
||||||
+ pc->gpio_chip.label = MODULE_NAME;
|
|
||||||
+ pc->gpio_chip.owner = THIS_MODULE;
|
|
||||||
+ pc->gpio_chip.request = gpiochip_generic_request;
|
|
||||||
+ pc->gpio_chip.free = gpiochip_generic_free;
|
|
||||||
+ pc->gpio_chip.direction_input = bcm6362_gpio_direction_input;
|
|
||||||
+ pc->gpio_chip.direction_output = bcm6362_gpio_direction_output;
|
|
||||||
+ pc->gpio_chip.get_direction = bcm6362_gpio_get_direction;
|
|
||||||
+ pc->gpio_chip.get = bcm6362_gpio_get;
|
|
||||||
+ pc->gpio_chip.set = bcm6362_gpio_set;
|
|
||||||
+ pc->gpio_chip.set_config = gpiochip_generic_config;
|
|
||||||
+ pc->gpio_chip.base = -1;
|
|
||||||
+ pc->gpio_chip.ngpio = BCM6362_NUM_GPIOS;
|
|
||||||
+ pc->gpio_chip.can_sleep = false;
|
|
||||||
+ pc->gpio_chip.parent = dev;
|
|
||||||
+ pc->gpio_chip.of_node = np;
|
|
||||||
+
|
|
||||||
+ if (of_get_property(np, "interrupt-names", NULL))
|
|
||||||
+ pc->gpio_chip.to_irq = bcm6362_gpio_to_irq;
|
|
||||||
+
|
|
||||||
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
||||||
+ if (err) {
|
|
||||||
+ dev_err(dev, "could not add GPIO chip\n");
|
|
||||||
+ return err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->pctl_desc.name = MODULE_NAME,
|
|
||||||
+ pc->pctl_desc.pins = bcm6362_pins,
|
|
||||||
+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6362_pins),
|
|
||||||
+ pc->pctl_desc.pctlops = &bcm6362_pctl_ops,
|
|
||||||
+ pc->pctl_desc.pmxops = &bcm6362_pmx_ops,
|
|
||||||
+ pc->pctl_desc.owner = THIS_MODULE,
|
|
||||||
+
|
|
||||||
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
|
||||||
+ if (IS_ERR(pc->pctl_dev)) {
|
|
||||||
+ gpiochip_remove(&pc->gpio_chip);
|
|
||||||
+ return PTR_ERR(pc->pctl_dev);
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->gpio_range.name = MODULE_NAME;
|
|
||||||
+ pc->gpio_range.npins = BCM6362_NUM_GPIOS;
|
|
||||||
+ pc->gpio_range.base = pc->gpio_chip.base;
|
|
||||||
+ pc->gpio_range.gc = &pc->gpio_chip;
|
|
||||||
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
||||||
+
|
|
||||||
+ dev_info(dev, "registered\n");
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static const struct of_device_id bcm6362_pinctrl_match[] = {
|
+static const struct of_device_id bcm6362_pinctrl_match[] = {
|
||||||
+ { .compatible = "brcm,bcm6362-pinctrl", },
|
+ { .compatible = "brcm,bcm6362-pinctrl", },
|
||||||
+ { },
|
+ { /* sentinel */ }
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct platform_driver bcm6362_pinctrl_driver = {
|
+static struct platform_driver bcm6362_pinctrl_driver = {
|
||||||
+ .probe = bcm6362_pinctrl_probe,
|
+ .probe = bcm6362_pinctrl_probe,
|
||||||
+ .driver = {
|
+ .driver = {
|
||||||
+ .name = MODULE_NAME,
|
+ .name = "bcm6362-pinctrl",
|
||||||
+ .of_match_table = bcm6362_pinctrl_match,
|
+ .of_match_table = bcm6362_pinctrl_match,
|
||||||
+ },
|
+ },
|
||||||
+};
|
+};
|
||||||
@@ -0,0 +1,242 @@
|
|||||||
|
From 9fbf8303796c89ecab026eb3dbadae7f98c49922 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:15 +0100
|
||||||
|
Subject: [PATCH 14/22] dt-bindings: add BCM6368 pincontroller binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the pincontrol core found in BCM6368 SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-15-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../pinctrl/brcm,bcm6368-pinctrl.yaml | 217 ++++++++++++++++++
|
||||||
|
1 file changed, 217 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
|
||||||
|
@@ -0,0 +1,217 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6368 pin controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Bindings for Broadcom's BCM6368 memory-mapped pin controller.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ const: brcm,bcm6368-pinctrl
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 2
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ '-pins$':
|
||||||
|
+ type: object
|
||||||
|
+ $ref: pinmux-node.yaml#
|
||||||
|
+
|
||||||
|
+ properties:
|
||||||
|
+ function:
|
||||||
|
+ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
|
||||||
|
+ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
|
||||||
|
+ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
|
||||||
|
+ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
|
||||||
|
+ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
|
||||||
|
+ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
|
||||||
|
+ spi_cs5, uart1 ]
|
||||||
|
+
|
||||||
|
+ pins:
|
||||||
|
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
|
||||||
|
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
|
||||||
|
+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
|
||||||
|
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
|
||||||
|
+ gpio31, uart1_grp ]
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6368-pinctrl";
|
||||||
|
+ reg = <0x18 0x4>, <0x38 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_analog_afe_0: analog_afe_0-pins {
|
||||||
|
+ function = "analog_afe_0";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_analog_afe_1: analog_afe_1-pins {
|
||||||
|
+ function = "analog_afe_1";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_sys_irq: sys_irq-pins {
|
||||||
|
+ function = "sys_irq";
|
||||||
|
+ pins = "gpio2";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio3";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio4";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_led: inet_led-pins {
|
||||||
|
+ function = "inet_led";
|
||||||
|
+ pins = "gpio5";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_led: ephy0_led-pins {
|
||||||
|
+ function = "ephy0_led";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_led: ephy1_led-pins {
|
||||||
|
+ function = "ephy1_led";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_led: ephy2_led-pins {
|
||||||
|
+ function = "ephy2_led";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_led: ephy3_led-pins {
|
||||||
|
+ function = "ephy3_led";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
|
+ function = "robosw_led_data";
|
||||||
|
+ pins = "gpio10";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
|
+ function = "robosw_led_clk";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led0: robosw_led0-pins {
|
||||||
|
+ function = "robosw_led0";
|
||||||
|
+ pins = "gpio12";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led1: robosw_led1-pins {
|
||||||
|
+ function = "robosw_led1";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
|
+ function = "usb_device_led";
|
||||||
|
+ pins = "gpio14";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci: pci-pins {
|
||||||
|
+ pinctrl_pci_req1: pci_req1-pins {
|
||||||
|
+ function = "pci_req1";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_gnt1: pci_gnt1-pins {
|
||||||
|
+ function = "pci_gnt1";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_intb: pci_intb-pins {
|
||||||
|
+ function = "pci_intb";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_req0: pci_req0-pins {
|
||||||
|
+ function = "pci_req0";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_gnt0: pci_gnt0-pins {
|
||||||
|
+ function = "pci_gnt0";
|
||||||
|
+ pins = "gpio20";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia: pcmcia-pins {
|
||||||
|
+ pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
|
||||||
|
+ function = "pcmcia_cd1";
|
||||||
|
+ pins = "gpio22";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
|
||||||
|
+ function = "pcmcia_cd2";
|
||||||
|
+ pins = "gpio23";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
|
||||||
|
+ function = "pcmcia_vs1";
|
||||||
|
+ pins = "gpio24";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
|
||||||
|
+ function = "pcmcia_vs2";
|
||||||
|
+ pins = "gpio25";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ebi_cs2: ebi_cs2-pins {
|
||||||
|
+ function = "ebi_cs2";
|
||||||
|
+ pins = "gpio26";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ebi_cs3: ebi_cs3-pins {
|
||||||
|
+ function = "ebi_cs3";
|
||||||
|
+ pins = "gpio27";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs2: spi_cs2-pins {
|
||||||
|
+ function = "spi_cs2";
|
||||||
|
+ pins = "gpio28";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs3: spi_cs3-pins {
|
||||||
|
+ function = "spi_cs3";
|
||||||
|
+ pins = "gpio29";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs4: spi_cs4-pins {
|
||||||
|
+ function = "spi_cs4";
|
||||||
|
+ pins = "gpio30";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs5: spi_cs5-pins {
|
||||||
|
+ function = "spi_cs5";
|
||||||
|
+ pins = "gpio31";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1: uart1-pins {
|
||||||
|
+ function = "uart1";
|
||||||
|
+ group = "uart1_grp";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,269 @@
|
|||||||
|
From fd22635f222f44dcb4dd6382d97de13144edad2b Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:16 +0100
|
||||||
|
Subject: [PATCH 15/22] dt-bindings: add BCM6368 GPIO sysctl binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the GPIO sysctl found in BCM6368 SoCs.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-16-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../mfd/brcm,bcm6368-gpio-sysctl.yaml | 246 ++++++++++++++++++
|
||||||
|
1 file changed, 246 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
|
||||||
|
@@ -0,0 +1,246 @@
|
||||||
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Broadcom BCM6368 SoC GPIO system controller which provides a register map
|
||||||
|
+ for controlling the GPIO and pins of the SoC.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ "#address-cells": true
|
||||||
|
+
|
||||||
|
+ "#size-cells": true
|
||||||
|
+
|
||||||
|
+ compatible:
|
||||||
|
+ items:
|
||||||
|
+ - const: brcm,bcm6368-gpio-sysctl
|
||||||
|
+ - const: syscon
|
||||||
|
+ - const: simple-mfd
|
||||||
|
+
|
||||||
|
+ ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ "^gpio@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../gpio/brcm,bcm6345-gpio.yaml"
|
||||||
|
+ description:
|
||||||
|
+ GPIO controller for the SoC GPIOs. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
|
||||||
|
+
|
||||||
|
+ "^pinctrl@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml"
|
||||||
|
+ description:
|
||||||
|
+ Pin controller for the SoC pins. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml.
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - "#address-cells"
|
||||||
|
+ - compatible
|
||||||
|
+ - ranges
|
||||||
|
+ - reg
|
||||||
|
+ - "#size-cells"
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ syscon@10000080 {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd";
|
||||||
|
+ reg = <0x10000080 0x80>;
|
||||||
|
+ ranges = <0 0x10000080 0x80>;
|
||||||
|
+
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm6368-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 38>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl: pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6368-pinctrl";
|
||||||
|
+ reg = <0x18 0x4>, <0x38 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_analog_afe_0: analog_afe_0-pins {
|
||||||
|
+ function = "analog_afe_0";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_analog_afe_1: analog_afe_1-pins {
|
||||||
|
+ function = "analog_afe_1";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_sys_irq: sys_irq-pins {
|
||||||
|
+ function = "sys_irq";
|
||||||
|
+ pins = "gpio2";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio3";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio4";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_led: inet_led-pins {
|
||||||
|
+ function = "inet_led";
|
||||||
|
+ pins = "gpio5";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_led: ephy0_led-pins {
|
||||||
|
+ function = "ephy0_led";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_led: ephy1_led-pins {
|
||||||
|
+ function = "ephy1_led";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_led: ephy2_led-pins {
|
||||||
|
+ function = "ephy2_led";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_led: ephy3_led-pins {
|
||||||
|
+ function = "ephy3_led";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
|
+ function = "robosw_led_data";
|
||||||
|
+ pins = "gpio10";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
|
+ function = "robosw_led_clk";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led0: robosw_led0-pins {
|
||||||
|
+ function = "robosw_led0";
|
||||||
|
+ pins = "gpio12";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led1: robosw_led1-pins {
|
||||||
|
+ function = "robosw_led1";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
|
+ function = "usb_device_led";
|
||||||
|
+ pins = "gpio14";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci: pci-pins {
|
||||||
|
+ pinctrl_pci_req1: pci_req1-pins {
|
||||||
|
+ function = "pci_req1";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_gnt1: pci_gnt1-pins {
|
||||||
|
+ function = "pci_gnt1";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_intb: pci_intb-pins {
|
||||||
|
+ function = "pci_intb";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_req0: pci_req0-pins {
|
||||||
|
+ function = "pci_req0";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pci_gnt0: pci_gnt0-pins {
|
||||||
|
+ function = "pci_gnt0";
|
||||||
|
+ pins = "gpio20";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia: pcmcia-pins {
|
||||||
|
+ pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
|
||||||
|
+ function = "pcmcia_cd1";
|
||||||
|
+ pins = "gpio22";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
|
||||||
|
+ function = "pcmcia_cd2";
|
||||||
|
+ pins = "gpio23";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
|
||||||
|
+ function = "pcmcia_vs1";
|
||||||
|
+ pins = "gpio24";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
|
||||||
|
+ function = "pcmcia_vs2";
|
||||||
|
+ pins = "gpio25";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ebi_cs2: ebi_cs2-pins {
|
||||||
|
+ function = "ebi_cs2";
|
||||||
|
+ pins = "gpio26";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ebi_cs3: ebi_cs3-pins {
|
||||||
|
+ function = "ebi_cs3";
|
||||||
|
+ pins = "gpio27";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs2: spi_cs2-pins {
|
||||||
|
+ function = "spi_cs2";
|
||||||
|
+ pins = "gpio28";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs3: spi_cs3-pins {
|
||||||
|
+ function = "spi_cs3";
|
||||||
|
+ pins = "gpio29";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs4: spi_cs4-pins {
|
||||||
|
+ function = "spi_cs4";
|
||||||
|
+ pins = "gpio30";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_spi_cs5: spi_cs5-pins {
|
||||||
|
+ function = "spi_cs5";
|
||||||
|
+ pins = "gpio31";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_uart1: uart1-pins {
|
||||||
|
+ function = "uart1";
|
||||||
|
+ group = "uart1_grp";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
From a212dcb2f04ae42f35ec11122a2532b1bcf8a94f Mon Sep 17 00:00:00 2001
|
From 50554accf7a79980cd04481e8903073bdb706daf Mon Sep 17 00:00:00 2001
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
Date: Fri, 24 Jun 2016 22:18:25 +0200
|
Date: Wed, 24 Mar 2021 09:19:17 +0100
|
||||||
Subject: [PATCH 08/12] pinctrl: add a pincontrol driver for BCM6368
|
Subject: [PATCH 16/22] pinctrl: add a pincontrol driver for BCM6368
|
||||||
MIME-Version: 1.0
|
MIME-Version: 1.0
|
||||||
Content-Type: text/plain; charset=UTF-8
|
Content-Type: text/plain; charset=UTF-8
|
||||||
Content-Transfer-Encoding: 8bit
|
Content-Transfer-Encoding: 8bit
|
||||||
@@ -9,28 +9,28 @@ Content-Transfer-Encoding: 8bit
|
|||||||
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
|
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32
|
||||||
GPIOs onto alternative functions. Not all are documented.
|
GPIOs onto alternative functions. Not all are documented.
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
---
|
---
|
||||||
drivers/pinctrl/bcm/Kconfig | 11 +
|
drivers/pinctrl/bcm/Kconfig | 8 +
|
||||||
drivers/pinctrl/bcm/Makefile | 1 +
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 679 ++++++++++++++++++++++++++
|
drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++
|
||||||
3 files changed, 691 insertions(+)
|
3 files changed, 532 insertions(+)
|
||||||
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c
|
||||||
|
|
||||||
--- a/drivers/pinctrl/bcm/Kconfig
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
+++ b/drivers/pinctrl/bcm/Kconfig
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
@@ -62,6 +62,17 @@ config PINCTRL_BCM6362
|
@@ -60,6 +60,14 @@ config PINCTRL_BCM6362
|
||||||
help
|
help
|
||||||
Say Y here to enable the Broadcom BCM6362 GPIO driver.
|
Say Y here to enable the Broadcom BCM6362 GPIO driver.
|
||||||
|
|
||||||
+config PINCTRL_BCM6368
|
+config PINCTRL_BCM6368
|
||||||
+ bool "Broadcom BCM6368 GPIO driver"
|
+ bool "Broadcom BCM6368 GPIO driver"
|
||||||
+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
+ select PINMUX
|
+ select PINCTRL_BCM63XX
|
||||||
+ select PINCONF
|
|
||||||
+ select GENERIC_PINCONF
|
|
||||||
+ select MFD_SYSCON
|
|
||||||
+ default BMIPS_GENERIC
|
+ default BMIPS_GENERIC
|
||||||
+ help
|
+ help
|
||||||
+ Say Y here to enable the Broadcom BCM6368 GPIO driver.
|
+ Say Y here to enable the Broadcom BCM6368 GPIO driver.
|
||||||
@@ -40,7 +40,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
||||||
--- a/drivers/pinctrl/bcm/Makefile
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
+++ b/drivers/pinctrl/bcm/Makefile
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctr
|
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctr
|
||||||
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
||||||
@@ -50,7 +50,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c
|
||||||
@@ -0,0 +1,679 @@
|
@@ -0,0 +1,523 @@
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
+/*
|
+/*
|
||||||
+ * Driver for BCM6368 GPIO unit (pinctrl + GPIO)
|
+ * Driver for BCM6368 GPIO unit (pinctrl + GPIO)
|
||||||
@@ -59,32 +59,20 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
+ */
|
+ */
|
||||||
+
|
+
|
||||||
+#include <linux/bitops.h>
|
+#include <linux/bits.h>
|
||||||
+#include <linux/gpio.h>
|
+#include <linux/gpio/driver.h>
|
||||||
+#include <linux/kernel.h>
|
+#include <linux/kernel.h>
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/of.h>
|
+#include <linux/of.h>
|
||||||
+#include <linux/of_gpio.h>
|
+#include <linux/pinctrl/pinmux.h>
|
||||||
+#include <linux/of_irq.h>
|
|
||||||
+#include <linux/platform_device.h>
|
+#include <linux/platform_device.h>
|
||||||
+#include <linux/regmap.h>
|
+#include <linux/regmap.h>
|
||||||
+
|
+
|
||||||
+#include <linux/pinctrl/machine.h>
|
|
||||||
+#include <linux/pinctrl/pinconf.h>
|
|
||||||
+#include <linux/pinctrl/pinconf-generic.h>
|
|
||||||
+#include <linux/pinctrl/pinmux.h>
|
|
||||||
+
|
|
||||||
+#include "../core.h"
|
|
||||||
+#include "../pinctrl-utils.h"
|
+#include "../pinctrl-utils.h"
|
||||||
+
|
+
|
||||||
+#define MODULE_NAME "bcm6368-pinctrl"
|
+#include "pinctrl-bcm63xx.h"
|
||||||
|
+
|
||||||
+#define BCM6368_NUM_GPIOS 38
|
+#define BCM6368_NUM_GPIOS 38
|
||||||
+
|
+
|
||||||
+#define BANK_SIZE sizeof(uint32_t)
|
|
||||||
+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
|
|
||||||
+
|
|
||||||
+#define BCM6368_DIROUT_REG 0x04
|
|
||||||
+#define BCM6368_DATA_REG 0x0c
|
|
||||||
+#define BCM6368_MODE_REG 0x18
|
+#define BCM6368_MODE_REG 0x18
|
||||||
+#define BCM6368_BASEMODE_REG 0x38
|
+#define BCM6368_BASEMODE_REG 0x38
|
||||||
+#define BCM6368_BASEMODE_MASK 0x7
|
+#define BCM6368_BASEMODE_MASK 0x7
|
||||||
@@ -106,15 +94,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ unsigned basemode:3;
|
+ unsigned basemode:3;
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+struct bcm6368_pinctrl {
|
+struct bcm6368_priv {
|
||||||
+ struct device *dev;
|
|
||||||
+ struct regmap *regs;
|
|
||||||
+ struct regmap_field *overlays;
|
+ struct regmap_field *overlays;
|
||||||
+
|
|
||||||
+ struct pinctrl_dev *pctl_dev;
|
|
||||||
+ struct gpio_chip gpio_chip;
|
|
||||||
+ struct pinctrl_desc pctl_desc;
|
|
||||||
+ struct pinctrl_gpio_range gpio_range;
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+#define BCM6368_BASEMODE_PIN(a, b) \
|
+#define BCM6368_BASEMODE_PIN(a, b) \
|
||||||
@@ -417,108 +398,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
|
+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6),
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6368_bank_pin(unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return pin % PINS_PER_BANK;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm6368_reg_off(unsigned int reg, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6368_gpio_direction_input(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6368_bank_pin(pin);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an input GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6368_gpio_direction_output(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin, int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin);
|
|
||||||
+ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6368_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an output GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin));
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6368_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6368_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, data, &val);
|
|
||||||
+
|
|
||||||
+ return !!(val & BIT(bank_pin));
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6368_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6368_reg_off(BCM6368_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6368_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, dirout, &val);
|
|
||||||
+
|
|
||||||
+ if (val & BIT(bank_pin))
|
|
||||||
+ return GPIO_LINE_DIRECTION_OUT;
|
|
||||||
+
|
|
||||||
+ return GPIO_LINE_DIRECTION_IN;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void bcm6368_gpio_set(struct gpio_chip *chip, unsigned int pin,
|
|
||||||
+ int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6368_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6368_reg_off(BCM6368_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6368_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6368_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
||||||
+{
|
|
||||||
+ char irq_name[7];
|
|
||||||
+
|
|
||||||
+ sprintf(irq_name, "gpio%d", gpio);
|
|
||||||
+
|
|
||||||
+ return of_irq_get_byname(chip->of_node, irq_name);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
||||||
+{
|
+{
|
||||||
+ return ARRAY_SIZE(bcm6368_groups);
|
+ return ARRAY_SIZE(bcm6368_groups);
|
||||||
@@ -565,7 +444,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
||||||
+ unsigned selector, unsigned group)
|
+ unsigned selector, unsigned group)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6368_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
|
+ struct bcm6368_priv *priv = pc->driver_data;
|
||||||
+ const struct bcm6368_pingroup *pg = &bcm6368_groups[group];
|
+ const struct bcm6368_pingroup *pg = &bcm6368_groups[group];
|
||||||
+ const struct bcm6368_function *fun = &bcm6368_funcs[selector];
|
+ const struct bcm6368_function *fun = &bcm6368_funcs[selector];
|
||||||
+ int i, pin;
|
+ int i, pin;
|
||||||
@@ -575,17 +455,17 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+
|
+
|
||||||
+ for (i = 0; i < pg->num_pins; i++) {
|
+ for (i = 0; i < pg->num_pins; i++) {
|
||||||
+ pin = pg->pins[i];
|
+ pin = pg->pins[i];
|
||||||
+ if (pin < PINS_PER_BANK)
|
+ if (pin < BCM63XX_BANK_GPIOS)
|
||||||
+ mask |= BIT(pin);
|
+ mask |= BIT(pin);
|
||||||
+ }
|
+ }
|
||||||
+
|
+
|
||||||
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0);
|
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0);
|
||||||
+ regmap_field_write(pc->overlays, fun->basemode);
|
+ regmap_field_write(priv->overlays, fun->basemode);
|
||||||
+ } else {
|
+ } else {
|
||||||
+ pin = pg->pins[0];
|
+ pin = pg->pins[0];
|
||||||
+
|
+
|
||||||
+ if (bcm6368_pins[pin].drv_data)
|
+ if (bcm6368_pins[pin].drv_data)
|
||||||
+ regmap_field_write(pc->overlays,
|
+ regmap_field_write(priv->overlays,
|
||||||
+ BCM6368_BASEMODE_GPIO);
|
+ BCM6368_BASEMODE_GPIO);
|
||||||
+
|
+
|
||||||
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin),
|
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin),
|
||||||
@@ -593,13 +473,18 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ }
|
+ }
|
||||||
+
|
+
|
||||||
+ for (pin = 0; pin < pg->num_pins; pin++) {
|
+ for (pin = 0; pin < pg->num_pins; pin++) {
|
||||||
|
+ struct pinctrl_gpio_range *range;
|
||||||
+ int hw_gpio = bcm6368_pins[pin].number;
|
+ int hw_gpio = bcm6368_pins[pin].number;
|
||||||
+ struct gpio_chip *gc = &pc->gpio_chip;
|
|
||||||
+
|
+
|
||||||
+ if (fun->dir_out & BIT(pin))
|
+ range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio);
|
||||||
+ gc->direction_output(gc, hw_gpio, 0);
|
+ if (range) {
|
||||||
+ else
|
+ struct gpio_chip *gc = range->gc;
|
||||||
+ gc->direction_input(gc, hw_gpio);
|
+
|
||||||
|
+ if (fun->dir_out & BIT(pin))
|
||||||
|
+ gc->direction_output(gc, hw_gpio, 0);
|
||||||
|
+ else
|
||||||
|
+ gc->direction_input(gc, hw_gpio);
|
||||||
|
+ }
|
||||||
+ }
|
+ }
|
||||||
+
|
+
|
||||||
+ return 0;
|
+ return 0;
|
||||||
@@ -609,122 +494,81 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ struct pinctrl_gpio_range *range,
|
+ struct pinctrl_gpio_range *range,
|
||||||
+ unsigned offset)
|
+ unsigned offset)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6368_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
|
+ struct bcm6368_priv *priv = pc->driver_data;
|
||||||
+
|
+
|
||||||
+ if (offset >= PINS_PER_BANK && !bcm6368_pins[offset].drv_data)
|
+ if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data)
|
||||||
+ return 0;
|
+ return 0;
|
||||||
+
|
+
|
||||||
+ /* disable all functions using this pin */
|
+ /* disable all functions using this pin */
|
||||||
+ if (offset < PINS_PER_BANK)
|
+ if (offset < BCM63XX_BANK_GPIOS)
|
||||||
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0);
|
+ regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0);
|
||||||
+
|
+
|
||||||
+ if (bcm6368_pins[offset].drv_data)
|
+ if (bcm6368_pins[offset].drv_data)
|
||||||
+ regmap_field_write(pc->overlays, BCM6368_BASEMODE_GPIO);
|
+ regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO);
|
||||||
+
|
+
|
||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static struct pinctrl_ops bcm6368_pctl_ops = {
|
+static struct pinctrl_ops bcm6368_pctl_ops = {
|
||||||
+ .get_groups_count = bcm6368_pinctrl_get_group_count,
|
+ .dt_free_map = pinctrl_utils_free_map,
|
||||||
|
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
||||||
+ .get_group_name = bcm6368_pinctrl_get_group_name,
|
+ .get_group_name = bcm6368_pinctrl_get_group_name,
|
||||||
+ .get_group_pins = bcm6368_pinctrl_get_group_pins,
|
+ .get_group_pins = bcm6368_pinctrl_get_group_pins,
|
||||||
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
+ .get_groups_count = bcm6368_pinctrl_get_group_count,
|
||||||
+ .dt_free_map = pinctrl_utils_free_map,
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct pinmux_ops bcm6368_pmx_ops = {
|
+static struct pinmux_ops bcm6368_pmx_ops = {
|
||||||
+ .get_functions_count = bcm6368_pinctrl_get_func_count,
|
|
||||||
+ .get_function_name = bcm6368_pinctrl_get_func_name,
|
|
||||||
+ .get_function_groups = bcm6368_pinctrl_get_groups,
|
+ .get_function_groups = bcm6368_pinctrl_get_groups,
|
||||||
+ .set_mux = bcm6368_pinctrl_set_mux,
|
+ .get_function_name = bcm6368_pinctrl_get_func_name,
|
||||||
|
+ .get_functions_count = bcm6368_pinctrl_get_func_count,
|
||||||
+ .gpio_request_enable = bcm6368_gpio_request_enable,
|
+ .gpio_request_enable = bcm6368_gpio_request_enable,
|
||||||
|
+ .set_mux = bcm6368_pinctrl_set_mux,
|
||||||
+ .strict = true,
|
+ .strict = true,
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
|
+static const struct bcm63xx_pinctrl_soc bcm6368_soc = {
|
||||||
|
+ .ngpios = BCM6368_NUM_GPIOS,
|
||||||
|
+ .npins = ARRAY_SIZE(bcm6368_pins),
|
||||||
|
+ .pctl_ops = &bcm6368_pctl_ops,
|
||||||
|
+ .pins = bcm6368_pins,
|
||||||
|
+ .pmx_ops = &bcm6368_pmx_ops,
|
||||||
|
+};
|
||||||
|
+
|
||||||
+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
|
+static int bcm6368_pinctrl_probe(struct platform_device *pdev)
|
||||||
+{
|
+{
|
||||||
+ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15);
|
+ struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15);
|
||||||
+ struct device *dev = &pdev->dev;
|
+ struct device *dev = &pdev->dev;
|
||||||
+ struct device_node *np = dev->of_node;
|
+ struct bcm63xx_pinctrl *pc;
|
||||||
+ struct bcm6368_pinctrl *pc;
|
+ struct bcm6368_priv *priv;
|
||||||
+ int err;
|
+ int err;
|
||||||
+
|
+
|
||||||
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||||
+ if (!pc)
|
+ if (!priv)
|
||||||
+ return -ENOMEM;
|
+ return -ENOMEM;
|
||||||
+
|
+
|
||||||
+ platform_set_drvdata(pdev, pc);
|
+ err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv);
|
||||||
+ pc->dev = dev;
|
+ if (err)
|
||||||
+
|
|
||||||
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
|
||||||
+ if (IS_ERR(pc->regs))
|
|
||||||
+ return PTR_ERR(pc->regs);
|
|
||||||
+
|
|
||||||
+ pc->overlays = devm_regmap_field_alloc(&pdev->dev, pc->regs, overlays);
|
|
||||||
+ if (IS_ERR(pc->overlays))
|
|
||||||
+ return PTR_ERR(pc->overlays);
|
|
||||||
+
|
|
||||||
+ /* disable all muxes by default */
|
|
||||||
+ regmap_field_write(pc->overlays, 0);
|
|
||||||
+
|
|
||||||
+ pc->gpio_chip.label = MODULE_NAME;
|
|
||||||
+ pc->gpio_chip.owner = THIS_MODULE;
|
|
||||||
+ pc->gpio_chip.request = gpiochip_generic_request;
|
|
||||||
+ pc->gpio_chip.free = gpiochip_generic_free;
|
|
||||||
+ pc->gpio_chip.direction_input = bcm6368_gpio_direction_input;
|
|
||||||
+ pc->gpio_chip.direction_output = bcm6368_gpio_direction_output;
|
|
||||||
+ pc->gpio_chip.get_direction = bcm6368_gpio_get_direction;
|
|
||||||
+ pc->gpio_chip.get = bcm6368_gpio_get;
|
|
||||||
+ pc->gpio_chip.set = bcm6368_gpio_set;
|
|
||||||
+ pc->gpio_chip.set_config = gpiochip_generic_config;
|
|
||||||
+ pc->gpio_chip.base = -1;
|
|
||||||
+ pc->gpio_chip.ngpio = BCM6368_NUM_GPIOS;
|
|
||||||
+ pc->gpio_chip.can_sleep = false;
|
|
||||||
+ pc->gpio_chip.parent = dev;
|
|
||||||
+ pc->gpio_chip.of_node = np;
|
|
||||||
+
|
|
||||||
+ if (of_get_property(np, "interrupt-names", NULL))
|
|
||||||
+ pc->gpio_chip.to_irq = bcm6368_gpio_to_irq;
|
|
||||||
+
|
|
||||||
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
||||||
+ if (err) {
|
|
||||||
+ dev_err(dev, "could not add GPIO chip\n");
|
|
||||||
+ return err;
|
+ return err;
|
||||||
+ }
|
|
||||||
+
|
+
|
||||||
+ pc->pctl_desc.name = MODULE_NAME,
|
+ pc = platform_get_drvdata(pdev);
|
||||||
+ pc->pctl_desc.pins = bcm6368_pins,
|
|
||||||
+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6368_pins),
|
|
||||||
+ pc->pctl_desc.pctlops = &bcm6368_pctl_ops,
|
|
||||||
+ pc->pctl_desc.pmxops = &bcm6368_pmx_ops,
|
|
||||||
+ pc->pctl_desc.owner = THIS_MODULE,
|
|
||||||
+
|
+
|
||||||
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
+ priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays);
|
||||||
+ if (IS_ERR(pc->pctl_dev)) {
|
+ if (IS_ERR(priv->overlays))
|
||||||
+ gpiochip_remove(&pc->gpio_chip);
|
+ return PTR_ERR(priv->overlays);
|
||||||
+ return PTR_ERR(pc->pctl_dev);
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->gpio_range.name = MODULE_NAME;
|
|
||||||
+ pc->gpio_range.npins = BCM6368_NUM_GPIOS;
|
|
||||||
+ pc->gpio_range.base = pc->gpio_chip.base;
|
|
||||||
+ pc->gpio_range.gc = &pc->gpio_chip;
|
|
||||||
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
||||||
+
|
|
||||||
+ dev_info(dev, "registered\n");
|
|
||||||
+
|
+
|
||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static const struct of_device_id bcm6368_pinctrl_match[] = {
|
+static const struct of_device_id bcm6368_pinctrl_match[] = {
|
||||||
+ { .compatible = "brcm,bcm6368-pinctrl", },
|
+ { .compatible = "brcm,bcm6368-pinctrl", },
|
||||||
+ { },
|
+ { /* sentinel */ }
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct platform_driver bcm6368_pinctrl_driver = {
|
+static struct platform_driver bcm6368_pinctrl_driver = {
|
||||||
+ .probe = bcm6368_pinctrl_probe,
|
+ .probe = bcm6368_pinctrl_probe,
|
||||||
+ .driver = {
|
+ .driver = {
|
||||||
+ .name = MODULE_NAME,
|
+ .name = "bcm6368-pinctrl",
|
||||||
+ .of_match_table = bcm6368_pinctrl_match,
|
+ .of_match_table = bcm6368_pinctrl_match,
|
||||||
+ },
|
+ },
|
||||||
+};
|
+};
|
||||||
@@ -0,0 +1,190 @@
|
|||||||
|
From 9b3303413379af8bed307cd465fe7aa1bc3569ea Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:18 +0100
|
||||||
|
Subject: [PATCH 17/22] dt-bindings: add BCM63268 pincontroller binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the pincontrol core found in the BCM63268
|
||||||
|
family SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-18-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../pinctrl/brcm,bcm63268-pinctrl.yaml | 164 ++++++++++++++++++
|
||||||
|
1 file changed, 164 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
|
||||||
|
@@ -0,0 +1,164 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM63268 pin controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Bindings for Broadcom's BCM63268 memory-mapped pin controller.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ const: brcm,bcm63268-pinctrl
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 3
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ '-pins$':
|
||||||
|
+ type: object
|
||||||
|
+ $ref: pinmux-node.yaml#
|
||||||
|
+
|
||||||
|
+ properties:
|
||||||
|
+ function:
|
||||||
|
+ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
|
||||||
|
+ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
|
||||||
|
+ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
|
||||||
|
+ nand, gpio35_alt, dectpd, vdsl_phy_override_0,
|
||||||
|
+ vdsl_phy_override_1, vdsl_phy_override_2,
|
||||||
|
+ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
|
||||||
|
+
|
||||||
|
+ pins:
|
||||||
|
+ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
|
||||||
|
+ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
|
||||||
|
+ dectpd_grp, vdsl_phy_override_0_grp,
|
||||||
|
+ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
|
||||||
|
+ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ pinctrl@10 {
|
||||||
|
+ compatible = "brcm,bcm63268-pinctrl";
|
||||||
|
+ reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs4: hsspi_cs4-pins {
|
||||||
|
+ function = "hsspi_cs4";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs5: hsspi_cs5-pins {
|
||||||
|
+ function = "hsspi_cs5";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs6: hsspi_cs6-pins {
|
||||||
|
+ function = "hsspi_cs6";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs7: hsspi_cs7-pins {
|
||||||
|
+ function = "hsspi_cs7";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi: adsl_spi-pins {
|
||||||
|
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
||||||
|
+ function = "adsl_spi_miso";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
||||||
|
+ function = "adsl_spi_mosi";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vreq_clk: vreq_clk-pins {
|
||||||
|
+ function = "vreq_clk";
|
||||||
|
+ pins = "gpio22";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
|
||||||
|
+ function = "pcie_clkreq_b";
|
||||||
|
+ pins = "gpio23";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
|
+ function = "robosw_led_clk";
|
||||||
|
+ pins = "gpio30";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
|
+ function = "robosw_led_data";
|
||||||
|
+ pins = "gpio31";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_nand: nand-pins {
|
||||||
|
+ function = "nand";
|
||||||
|
+ group = "nand_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_gpio35_alt: gpio35_alt-pins {
|
||||||
|
+ function = "gpio35_alt";
|
||||||
|
+ pin = "gpio35";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dectpd: dectpd-pins {
|
||||||
|
+ function = "dectpd";
|
||||||
|
+ group = "dectpd_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
|
||||||
|
+ function = "vdsl_phy_override_0";
|
||||||
|
+ group = "vdsl_phy_override_0_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
|
||||||
|
+ function = "vdsl_phy_override_1";
|
||||||
|
+ group = "vdsl_phy_override_1_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
|
||||||
|
+ function = "vdsl_phy_override_2";
|
||||||
|
+ group = "vdsl_phy_override_2_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
|
||||||
|
+ function = "vdsl_phy_override_3";
|
||||||
|
+ group = "vdsl_phy_override_3_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dsl_gpio8: dsl_gpio8-pins {
|
||||||
|
+ function = "dsl_gpio8";
|
||||||
|
+ group = "dsl_gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dsl_gpio9: dsl_gpio9-pins {
|
||||||
|
+ function = "dsl_gpio9";
|
||||||
|
+ group = "dsl_gpio9";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,217 @@
|
|||||||
|
From ff8324355d7ae2e4ebbd304de27bb5fa75e20c6a Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:19 +0100
|
||||||
|
Subject: [PATCH 18/22] dt-bindings: add BCM63268 GPIO sysctl binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the GPIO sysctl found in BCM63268 SoCs.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-19-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../mfd/brcm,bcm63268-gpio-sysctl.yaml | 194 ++++++++++++++++++
|
||||||
|
1 file changed, 194 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
|
||||||
|
@@ -0,0 +1,194 @@
|
||||||
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Broadcom BCM63268 SoC GPIO system controller which provides a register map
|
||||||
|
+ for controlling the GPIO and pins of the SoC.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ "#address-cells": true
|
||||||
|
+
|
||||||
|
+ "#size-cells": true
|
||||||
|
+
|
||||||
|
+ compatible:
|
||||||
|
+ items:
|
||||||
|
+ - const: brcm,bcm63268-gpio-sysctl
|
||||||
|
+ - const: syscon
|
||||||
|
+ - const: simple-mfd
|
||||||
|
+
|
||||||
|
+ ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ "^gpio@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../gpio/brcm,bcm6345-gpio.yaml"
|
||||||
|
+ description:
|
||||||
|
+ GPIO controller for the SoC GPIOs. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
|
||||||
|
+
|
||||||
|
+ "^pinctrl@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml"
|
||||||
|
+ description:
|
||||||
|
+ Pin controller for the SoC pins. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml.
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - "#address-cells"
|
||||||
|
+ - compatible
|
||||||
|
+ - ranges
|
||||||
|
+ - reg
|
||||||
|
+ - "#size-cells"
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ syscon@100000c0 {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd";
|
||||||
|
+ reg = <0x100000c0 0x80>;
|
||||||
|
+ ranges = <0 0x100000c0 0x80>;
|
||||||
|
+
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm63268-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 52>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl: pinctrl@10 {
|
||||||
|
+ compatible = "brcm,bcm63268-pinctrl";
|
||||||
|
+ reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs4: hsspi_cs4-pins {
|
||||||
|
+ function = "hsspi_cs4";
|
||||||
|
+ pins = "gpio16";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs5: hsspi_cs5-pins {
|
||||||
|
+ function = "hsspi_cs5";
|
||||||
|
+ pins = "gpio17";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs6: hsspi_cs6-pins {
|
||||||
|
+ function = "hsspi_cs6";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_hsspi_cs7: hsspi_cs7-pins {
|
||||||
|
+ function = "hsspi_cs7";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi: adsl_spi-pins {
|
||||||
|
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
||||||
|
+ function = "adsl_spi_miso";
|
||||||
|
+ pins = "gpio18";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
||||||
|
+ function = "adsl_spi_mosi";
|
||||||
|
+ pins = "gpio19";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vreq_clk: vreq_clk-pins {
|
||||||
|
+ function = "vreq_clk";
|
||||||
|
+ pins = "gpio22";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
|
||||||
|
+ function = "pcie_clkreq_b";
|
||||||
|
+ pins = "gpio23";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
||||||
|
+ function = "robosw_led_clk";
|
||||||
|
+ pins = "gpio30";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_robosw_led_data: robosw_led_data-pins {
|
||||||
|
+ function = "robosw_led_data";
|
||||||
|
+ pins = "gpio31";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_nand: nand-pins {
|
||||||
|
+ function = "nand";
|
||||||
|
+ group = "nand_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_gpio35_alt: gpio35_alt-pins {
|
||||||
|
+ function = "gpio35_alt";
|
||||||
|
+ pin = "gpio35";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dectpd: dectpd-pins {
|
||||||
|
+ function = "dectpd";
|
||||||
|
+ group = "dectpd_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
|
||||||
|
+ function = "vdsl_phy_override_0";
|
||||||
|
+ group = "vdsl_phy_override_0_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
|
||||||
|
+ function = "vdsl_phy_override_1";
|
||||||
|
+ group = "vdsl_phy_override_1_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
|
||||||
|
+ function = "vdsl_phy_override_2";
|
||||||
|
+ group = "vdsl_phy_override_2_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
|
||||||
|
+ function = "vdsl_phy_override_3";
|
||||||
|
+ group = "vdsl_phy_override_3_grp";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dsl_gpio8: dsl_gpio8-pins {
|
||||||
|
+ function = "dsl_gpio8";
|
||||||
|
+ group = "dsl_gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dsl_gpio9: dsl_gpio9-pins {
|
||||||
|
+ function = "dsl_gpio9";
|
||||||
|
+ group = "dsl_gpio9";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
From 8ec959299a6e4bbdc65d62180aa952ae04cdcf07 Mon Sep 17 00:00:00 2001
|
From 155cca1b0794a8f541e7eaa45be70df0a49964f3 Mon Sep 17 00:00:00 2001
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
Date: Fri, 24 Jun 2016 22:19:12 +0200
|
Date: Wed, 24 Mar 2021 09:19:20 +0100
|
||||||
Subject: [PATCH 10/12] pinctrl: add a pincontrol driver for BCM63268
|
Subject: [PATCH 19/22] pinctrl: add a pincontrol driver for BCM63268
|
||||||
MIME-Version: 1.0
|
MIME-Version: 1.0
|
||||||
Content-Type: text/plain; charset=UTF-8
|
Content-Type: text/plain; charset=UTF-8
|
||||||
Content-Transfer-Encoding: 8bit
|
Content-Transfer-Encoding: 8bit
|
||||||
@@ -10,28 +10,28 @@ Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs
|
|||||||
to different functions. Depending on the mux, these are either single
|
to different functions. Depending on the mux, these are either single
|
||||||
pin configurations or whole pin groups.
|
pin configurations or whole pin groups.
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
---
|
---
|
||||||
drivers/pinctrl/bcm/Kconfig | 11 +
|
drivers/pinctrl/bcm/Kconfig | 8 +
|
||||||
drivers/pinctrl/bcm/Makefile | 1 +
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
drivers/pinctrl/bcm/pinctrl-bcm63268.c | 821 +++++++++++++++++++++++++
|
drivers/pinctrl/bcm/pinctrl-bcm63268.c | 643 +++++++++++++++++++++++++
|
||||||
3 files changed, 833 insertions(+)
|
3 files changed, 652 insertions(+)
|
||||||
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63268.c
|
||||||
|
|
||||||
--- a/drivers/pinctrl/bcm/Kconfig
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
+++ b/drivers/pinctrl/bcm/Kconfig
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
@@ -73,6 +73,17 @@ config PINCTRL_BCM6368
|
@@ -68,6 +68,14 @@ config PINCTRL_BCM6368
|
||||||
help
|
help
|
||||||
Say Y here to enable the Broadcom BCM6368 GPIO driver.
|
Say Y here to enable the Broadcom BCM6368 GPIO driver.
|
||||||
|
|
||||||
+config PINCTRL_BCM63268
|
+config PINCTRL_BCM63268
|
||||||
+ bool "Broadcom BCM63268 GPIO driver"
|
+ bool "Broadcom BCM63268 GPIO driver"
|
||||||
+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
+ select PINMUX
|
+ select PINCTRL_BCM63XX
|
||||||
+ select PINCONF
|
|
||||||
+ select GENERIC_PINCONF
|
|
||||||
+ select MFD_SYSCON
|
|
||||||
+ default BMIPS_GENERIC
|
+ default BMIPS_GENERIC
|
||||||
+ help
|
+ help
|
||||||
+ Say Y here to enable the Broadcom BCM63268 GPIO driver.
|
+ Say Y here to enable the Broadcom BCM63268 GPIO driver.
|
||||||
@@ -41,7 +41,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
|
||||||
--- a/drivers/pinctrl/bcm/Makefile
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
+++ b/drivers/pinctrl/bcm/Makefile
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctr
|
@@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctr
|
||||||
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
|
obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o
|
||||||
@@ -51,7 +51,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63268.c
|
||||||
@@ -0,0 +1,821 @@
|
@@ -0,0 +1,643 @@
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
+/*
|
+/*
|
||||||
+ * Driver for BCM63268 GPIO unit (pinctrl + GPIO)
|
+ * Driver for BCM63268 GPIO unit (pinctrl + GPIO)
|
||||||
@@ -60,33 +60,21 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
+ */
|
+ */
|
||||||
+
|
+
|
||||||
+#include <linux/bitops.h>
|
+#include <linux/bits.h>
|
||||||
+#include <linux/gpio.h>
|
+#include <linux/gpio/driver.h>
|
||||||
+#include <linux/kernel.h>
|
+#include <linux/kernel.h>
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/of.h>
|
+#include <linux/of.h>
|
||||||
+#include <linux/of_gpio.h>
|
+#include <linux/pinctrl/pinmux.h>
|
||||||
+#include <linux/of_irq.h>
|
|
||||||
+#include <linux/platform_device.h>
|
+#include <linux/platform_device.h>
|
||||||
+#include <linux/regmap.h>
|
+#include <linux/regmap.h>
|
||||||
+
|
+
|
||||||
+#include <linux/pinctrl/machine.h>
|
|
||||||
+#include <linux/pinctrl/pinconf.h>
|
|
||||||
+#include <linux/pinctrl/pinconf-generic.h>
|
|
||||||
+#include <linux/pinctrl/pinmux.h>
|
|
||||||
+
|
|
||||||
+#include "../core.h"
|
|
||||||
+#include "../pinctrl-utils.h"
|
+#include "../pinctrl-utils.h"
|
||||||
+
|
+
|
||||||
+#define MODULE_NAME "bcm63268-pinctrl"
|
+#include "pinctrl-bcm63xx.h"
|
||||||
|
+
|
||||||
+#define BCM63268_NUM_GPIOS 52
|
+#define BCM63268_NUM_GPIOS 52
|
||||||
+#define BCM63268_NUM_LEDS 24
|
+#define BCM63268_NUM_LEDS 24
|
||||||
+
|
+
|
||||||
+#define BANK_SIZE sizeof(uint32_t)
|
|
||||||
+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
|
|
||||||
+
|
|
||||||
+#define BCM63268_DIROUT_REG 0x04
|
|
||||||
+#define BCM63268_DATA_REG 0x0c
|
|
||||||
+#define BCM63268_LED_REG 0x10
|
+#define BCM63268_LED_REG 0x10
|
||||||
+#define BCM63268_MODE_REG 0x18
|
+#define BCM63268_MODE_REG 0x18
|
||||||
+#define BCM63268_CTRL_REG 0x1c
|
+#define BCM63268_CTRL_REG 0x1c
|
||||||
@@ -121,16 +109,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ uint32_t mask;
|
+ uint32_t mask;
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+struct bcm63268_pinctrl {
|
|
||||||
+ struct device *dev;
|
|
||||||
+ struct regmap *regs;
|
|
||||||
+
|
|
||||||
+ struct pinctrl_dev *pctl_dev;
|
|
||||||
+ struct gpio_chip gpio_chip;
|
|
||||||
+ struct pinctrl_desc pctl_desc;
|
|
||||||
+ struct pinctrl_gpio_range gpio_range;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+#define BCM63268_PIN(a, b, basemode) \
|
+#define BCM63268_PIN(a, b, basemode) \
|
||||||
+ { \
|
+ { \
|
||||||
+ .number = a, \
|
+ .number = a, \
|
||||||
@@ -549,108 +527,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ BCM63268_BASEMODE_VDSL_PHY_3),
|
+ BCM63268_BASEMODE_VDSL_PHY_3),
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm63268_bank_pin(unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return pin % PINS_PER_BANK;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm63268_reg_off(unsigned int reg, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm63268_gpio_direction_input(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm63268_bank_pin(pin);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an input GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm63268_gpio_direction_output(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin, int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin);
|
|
||||||
+ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm63268_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an output GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin));
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm63268_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm63268_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, data, &val);
|
|
||||||
+
|
|
||||||
+ return !!(val & BIT(bank_pin));
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm63268_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm63268_reg_off(BCM63268_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm63268_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, dirout, &val);
|
|
||||||
+
|
|
||||||
+ if (val & BIT(bank_pin))
|
|
||||||
+ return GPIO_LINE_DIRECTION_OUT;
|
|
||||||
+
|
|
||||||
+ return GPIO_LINE_DIRECTION_IN;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void bcm63268_gpio_set(struct gpio_chip *chip, unsigned int pin,
|
|
||||||
+ int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm63268_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm63268_reg_off(BCM63268_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm63268_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm63268_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
||||||
+{
|
|
||||||
+ char irq_name[7];
|
|
||||||
+
|
|
||||||
+ sprintf(irq_name, "gpio%d", gpio);
|
|
||||||
+
|
|
||||||
+ return of_irq_get_byname(chip->of_node, irq_name);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
||||||
+{
|
+{
|
||||||
+ return ARRAY_SIZE(bcm63268_groups);
|
+ return ARRAY_SIZE(bcm63268_groups);
|
||||||
@@ -695,17 +571,17 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pc, unsigned pin)
|
+static void bcm63268_set_gpio(struct bcm63xx_pinctrl *pc, unsigned pin)
|
||||||
+{
|
+{
|
||||||
+ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
|
+ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin];
|
||||||
+ unsigned int basemode = (unsigned long) desc->drv_data;
|
+ unsigned int basemode = (unsigned long) desc->drv_data;
|
||||||
+ unsigned int mask = BIT(bcm63268_bank_pin(pin));
|
+ unsigned int mask = BIT(bcm63xx_bank_pin(pin));
|
||||||
+
|
+
|
||||||
+ if (basemode)
|
+ if (basemode)
|
||||||
+ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode,
|
+ regmap_update_bits(pc->regs, BCM63268_BASEMODE_REG, basemode,
|
||||||
+ 0);
|
+ 0);
|
||||||
+
|
+
|
||||||
+ if (pin < PINS_PER_BANK) {
|
+ if (pin < BCM63XX_BANK_GPIOS) {
|
||||||
+ /* base mode: 0 => gpio, 1 => mux function */
|
+ /* base mode: 0 => gpio, 1 => mux function */
|
||||||
+ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0);
|
+ regmap_update_bits(pc->regs, BCM63268_MODE_REG, mask, 0);
|
||||||
+
|
+
|
||||||
@@ -722,7 +598,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
||||||
+ unsigned selector, unsigned group)
|
+ unsigned selector, unsigned group)
|
||||||
+{
|
+{
|
||||||
+ struct bcm63268_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+ const struct bcm63268_pingroup *pg = &bcm63268_groups[group];
|
+ const struct bcm63268_pingroup *pg = &bcm63268_groups[group];
|
||||||
+ const struct bcm63268_function *f = &bcm63268_funcs[selector];
|
+ const struct bcm63268_function *f = &bcm63268_funcs[selector];
|
||||||
+ unsigned i;
|
+ unsigned i;
|
||||||
@@ -767,7 +643,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ struct pinctrl_gpio_range *range,
|
+ struct pinctrl_gpio_range *range,
|
||||||
+ unsigned offset)
|
+ unsigned offset)
|
||||||
+{
|
+{
|
||||||
+ struct bcm63268_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+
|
+
|
||||||
+ /* disable all functions using this pin */
|
+ /* disable all functions using this pin */
|
||||||
+ bcm63268_set_gpio(pc, offset);
|
+ bcm63268_set_gpio(pc, offset);
|
||||||
@@ -776,98 +652,44 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static struct pinctrl_ops bcm63268_pctl_ops = {
|
+static struct pinctrl_ops bcm63268_pctl_ops = {
|
||||||
+ .get_groups_count = bcm63268_pinctrl_get_group_count,
|
+ .dt_free_map = pinctrl_utils_free_map,
|
||||||
|
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
||||||
+ .get_group_name = bcm63268_pinctrl_get_group_name,
|
+ .get_group_name = bcm63268_pinctrl_get_group_name,
|
||||||
+ .get_group_pins = bcm63268_pinctrl_get_group_pins,
|
+ .get_group_pins = bcm63268_pinctrl_get_group_pins,
|
||||||
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
+ .get_groups_count = bcm63268_pinctrl_get_group_count,
|
||||||
+ .dt_free_map = pinctrl_utils_free_map,
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct pinmux_ops bcm63268_pmx_ops = {
|
+static struct pinmux_ops bcm63268_pmx_ops = {
|
||||||
+ .get_functions_count = bcm63268_pinctrl_get_func_count,
|
|
||||||
+ .get_function_name = bcm63268_pinctrl_get_func_name,
|
|
||||||
+ .get_function_groups = bcm63268_pinctrl_get_groups,
|
+ .get_function_groups = bcm63268_pinctrl_get_groups,
|
||||||
+ .set_mux = bcm63268_pinctrl_set_mux,
|
+ .get_function_name = bcm63268_pinctrl_get_func_name,
|
||||||
|
+ .get_functions_count = bcm63268_pinctrl_get_func_count,
|
||||||
+ .gpio_request_enable = bcm63268_gpio_request_enable,
|
+ .gpio_request_enable = bcm63268_gpio_request_enable,
|
||||||
|
+ .set_mux = bcm63268_pinctrl_set_mux,
|
||||||
+ .strict = true,
|
+ .strict = true,
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
|
+static const struct bcm63xx_pinctrl_soc bcm63268_soc = {
|
||||||
|
+ .ngpios = BCM63268_NUM_GPIOS,
|
||||||
|
+ .npins = ARRAY_SIZE(bcm63268_pins),
|
||||||
|
+ .pctl_ops = &bcm63268_pctl_ops,
|
||||||
|
+ .pins = bcm63268_pins,
|
||||||
|
+ .pmx_ops = &bcm63268_pmx_ops,
|
||||||
|
+};
|
||||||
|
+
|
||||||
+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
|
+static int bcm63268_pinctrl_probe(struct platform_device *pdev)
|
||||||
+{
|
+{
|
||||||
+ struct device *dev = &pdev->dev;
|
+ return bcm63xx_pinctrl_probe(pdev, &bcm63268_soc, NULL);
|
||||||
+ struct device_node *np = dev->of_node;
|
|
||||||
+ struct bcm63268_pinctrl *pc;
|
|
||||||
+ int err;
|
|
||||||
+
|
|
||||||
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
|
||||||
+ if (!pc)
|
|
||||||
+ return -ENOMEM;
|
|
||||||
+
|
|
||||||
+ platform_set_drvdata(pdev, pc);
|
|
||||||
+ pc->dev = dev;
|
|
||||||
+
|
|
||||||
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
|
||||||
+ if (IS_ERR(pc->regs))
|
|
||||||
+ return PTR_ERR(pc->regs);
|
|
||||||
+
|
|
||||||
+ pc->gpio_chip.label = MODULE_NAME;
|
|
||||||
+ pc->gpio_chip.owner = THIS_MODULE;
|
|
||||||
+ pc->gpio_chip.request = gpiochip_generic_request;
|
|
||||||
+ pc->gpio_chip.free = gpiochip_generic_free;
|
|
||||||
+ pc->gpio_chip.direction_input = bcm63268_gpio_direction_input;
|
|
||||||
+ pc->gpio_chip.direction_output = bcm63268_gpio_direction_output;
|
|
||||||
+ pc->gpio_chip.get_direction = bcm63268_gpio_get_direction;
|
|
||||||
+ pc->gpio_chip.get = bcm63268_gpio_get;
|
|
||||||
+ pc->gpio_chip.set = bcm63268_gpio_set;
|
|
||||||
+ pc->gpio_chip.set_config = gpiochip_generic_config;
|
|
||||||
+ pc->gpio_chip.base = -1;
|
|
||||||
+ pc->gpio_chip.ngpio = BCM63268_NUM_GPIOS;
|
|
||||||
+ pc->gpio_chip.can_sleep = false;
|
|
||||||
+ pc->gpio_chip.parent = dev;
|
|
||||||
+ pc->gpio_chip.of_node = np;
|
|
||||||
+
|
|
||||||
+ if (of_get_property(np, "interrupt-names", NULL))
|
|
||||||
+ pc->gpio_chip.to_irq = bcm63268_gpio_to_irq;
|
|
||||||
+
|
|
||||||
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
||||||
+ if (err) {
|
|
||||||
+ dev_err(dev, "could not add GPIO chip\n");
|
|
||||||
+ return err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->pctl_desc.name = MODULE_NAME,
|
|
||||||
+ pc->pctl_desc.pins = bcm63268_pins,
|
|
||||||
+ pc->pctl_desc.npins = ARRAY_SIZE(bcm63268_pins),
|
|
||||||
+ pc->pctl_desc.pctlops = &bcm63268_pctl_ops,
|
|
||||||
+ pc->pctl_desc.pmxops = &bcm63268_pmx_ops,
|
|
||||||
+ pc->pctl_desc.owner = THIS_MODULE,
|
|
||||||
+
|
|
||||||
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
|
||||||
+ if (IS_ERR(pc->pctl_dev)) {
|
|
||||||
+ gpiochip_remove(&pc->gpio_chip);
|
|
||||||
+ return PTR_ERR(pc->pctl_dev);
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->gpio_range.name = MODULE_NAME;
|
|
||||||
+ pc->gpio_range.npins = BCM63268_NUM_GPIOS;
|
|
||||||
+ pc->gpio_range.base = pc->gpio_chip.base;
|
|
||||||
+ pc->gpio_range.gc = &pc->gpio_chip;
|
|
||||||
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
||||||
+
|
|
||||||
+ dev_info(dev, "registered\n");
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static const struct of_device_id bcm63268_pinctrl_match[] = {
|
+static const struct of_device_id bcm63268_pinctrl_match[] = {
|
||||||
+ { .compatible = "brcm,bcm63268-pinctrl", },
|
+ { .compatible = "brcm,bcm63268-pinctrl", },
|
||||||
+ { },
|
+ { /* sentinel */ }
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct platform_driver bcm63268_pinctrl_driver = {
|
+static struct platform_driver bcm63268_pinctrl_driver = {
|
||||||
+ .probe = bcm63268_pinctrl_probe,
|
+ .probe = bcm63268_pinctrl_probe,
|
||||||
+ .driver = {
|
+ .driver = {
|
||||||
+ .name = MODULE_NAME,
|
+ .name = "bcm63268-pinctrl",
|
||||||
+ .of_match_table = bcm63268_pinctrl_match,
|
+ .of_match_table = bcm63268_pinctrl_match,
|
||||||
+ },
|
+ },
|
||||||
+};
|
+};
|
||||||
@@ -0,0 +1,168 @@
|
|||||||
|
From b2f215141b985d5d39ed16fe7e2089d5aa162302 Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:21 +0100
|
||||||
|
Subject: [PATCH 20/22] dt-bindings: add BCM6318 pincontroller binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the pincontrol core found in BCM6318 SoCs.
|
||||||
|
|
||||||
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-21-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 143 ++++++++++++++++++
|
||||||
|
1 file changed, 143 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
|
||||||
|
@@ -0,0 +1,143 @@
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6318 pin controller
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Bindings for Broadcom's BCM6318 memory-mapped pin controller.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ compatible:
|
||||||
|
+ const: brcm,bcm6318-pinctrl
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 2
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ '-pins$':
|
||||||
|
+ type: object
|
||||||
|
+ $ref: pinmux-node.yaml#
|
||||||
|
+
|
||||||
|
+ properties:
|
||||||
|
+ function:
|
||||||
|
+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
|
||||||
|
+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
|
||||||
|
+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
|
||||||
|
+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
|
||||||
|
+ usb_device_led, usb_active ]
|
||||||
|
+
|
||||||
|
+ pins:
|
||||||
|
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
|
||||||
|
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - compatible
|
||||||
|
+ - reg
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ pinctrl@18 {
|
||||||
|
+ compatible = "brcm,bcm6318-pinctrl";
|
||||||
|
+ reg = <0x18 0x10>, <0x54 0x18>;
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
|
||||||
|
+ function = "ephy0_spd_led";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
|
||||||
|
+ function = "ephy1_spd_led";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
|
||||||
|
+ function = "ephy2_spd_led";
|
||||||
|
+ pins = "gpio2";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
|
||||||
|
+ function = "ephy3_spd_led";
|
||||||
|
+ pins = "gpio3";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_act_led: ephy0_act_led-pins {
|
||||||
|
+ function = "ephy0_act_led";
|
||||||
|
+ pins = "gpio4";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_act_led: ephy1_act_led-pins {
|
||||||
|
+ function = "ephy1_act_led";
|
||||||
|
+ pins = "gpio5";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_act_led: ephy2_act_led-pins {
|
||||||
|
+ function = "ephy2_act_led";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_act_led: ephy3_act_led-pins {
|
||||||
|
+ function = "ephy3_act_led";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_act_led: inet_act_led-pins {
|
||||||
|
+ function = "inet_act_led";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_fail_led: inet_fail_led-pins {
|
||||||
|
+ function = "inet_fail_led";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dsl_led: dsl_led-pins {
|
||||||
|
+ function = "dsl_led";
|
||||||
|
+ pins = "gpio10";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_post_fail_led: post_fail_led-pins {
|
||||||
|
+ function = "post_fail_led";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_wlan_wps_led: wlan_wps_led-pins {
|
||||||
|
+ function = "wlan_wps_led";
|
||||||
|
+ pins = "gpio12";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_pwron: usb_pwron-pins {
|
||||||
|
+ function = "usb_pwron";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
|
+ function = "usb_device_led";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_active: usb_active-pins {
|
||||||
|
+ function = "usb_active";
|
||||||
|
+ pins = "gpio40";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -0,0 +1,200 @@
|
|||||||
|
From b6d46b9454742a25f9d923be072869e40b2ecebb Mon Sep 17 00:00:00 2001
|
||||||
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
|
Date: Wed, 24 Mar 2021 09:19:22 +0100
|
||||||
|
Subject: [PATCH 21/22] dt-bindings: add BCM6318 GPIO sysctl binding
|
||||||
|
documentation
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
Add binding documentation for the GPIO sysctl found in BCM6318 SoCs.
|
||||||
|
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Reviewed-by: Rob Herring <robh@kernel.org>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-22-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
|
---
|
||||||
|
.../mfd/brcm,bcm6318-gpio-sysctl.yaml | 177 ++++++++++++++++++
|
||||||
|
1 file changed, 177 insertions(+)
|
||||||
|
create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
|
||||||
|
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
|
||||||
|
@@ -0,0 +1,177 @@
|
||||||
|
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||||
|
+%YAML 1.2
|
||||||
|
+---
|
||||||
|
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
|
||||||
|
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
+
|
||||||
|
+title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings
|
||||||
|
+
|
||||||
|
+maintainers:
|
||||||
|
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
+
|
||||||
|
+description:
|
||||||
|
+ Broadcom BCM6318 SoC GPIO system controller which provides a register map
|
||||||
|
+ for controlling the GPIO and pins of the SoC.
|
||||||
|
+
|
||||||
|
+properties:
|
||||||
|
+ "#address-cells": true
|
||||||
|
+
|
||||||
|
+ "#size-cells": true
|
||||||
|
+
|
||||||
|
+ compatible:
|
||||||
|
+ items:
|
||||||
|
+ - const: brcm,bcm6318-gpio-sysctl
|
||||||
|
+ - const: syscon
|
||||||
|
+ - const: simple-mfd
|
||||||
|
+
|
||||||
|
+ ranges:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+ reg:
|
||||||
|
+ maxItems: 1
|
||||||
|
+
|
||||||
|
+patternProperties:
|
||||||
|
+ "^gpio@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../gpio/brcm,bcm6345-gpio.yaml"
|
||||||
|
+ description:
|
||||||
|
+ GPIO controller for the SoC GPIOs. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
|
||||||
|
+
|
||||||
|
+ "^pinctrl@[0-9a-f]+$":
|
||||||
|
+ # Child node
|
||||||
|
+ type: object
|
||||||
|
+ $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
|
||||||
|
+ description:
|
||||||
|
+ Pin controller for the SoC pins. This child node definition
|
||||||
|
+ should follow the bindings specified in
|
||||||
|
+ Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml.
|
||||||
|
+
|
||||||
|
+required:
|
||||||
|
+ - "#address-cells"
|
||||||
|
+ - compatible
|
||||||
|
+ - ranges
|
||||||
|
+ - reg
|
||||||
|
+ - "#size-cells"
|
||||||
|
+
|
||||||
|
+additionalProperties: false
|
||||||
|
+
|
||||||
|
+examples:
|
||||||
|
+ - |
|
||||||
|
+ syscon@10000080 {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd";
|
||||||
|
+ reg = <0x10000080 0x80>;
|
||||||
|
+ ranges = <0 0x10000080 0x80>;
|
||||||
|
+
|
||||||
|
+ gpio@0 {
|
||||||
|
+ compatible = "brcm,bcm6318-gpio";
|
||||||
|
+ reg-names = "dirout", "dat";
|
||||||
|
+ reg = <0x0 0x8>, <0x8 0x8>;
|
||||||
|
+
|
||||||
|
+ gpio-controller;
|
||||||
|
+ gpio-ranges = <&pinctrl 0 0 50>;
|
||||||
|
+ #gpio-cells = <2>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl: pinctrl@10 {
|
||||||
|
+ compatible = "brcm,bcm6318-pinctrl";
|
||||||
|
+ reg = <0x18 0x10>, <0x54 0x18>;
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
|
||||||
|
+ function = "ephy0_spd_led";
|
||||||
|
+ pins = "gpio0";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
|
||||||
|
+ function = "ephy1_spd_led";
|
||||||
|
+ pins = "gpio1";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
|
||||||
|
+ function = "ephy2_spd_led";
|
||||||
|
+ pins = "gpio2";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
|
||||||
|
+ function = "ephy3_spd_led";
|
||||||
|
+ pins = "gpio3";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy0_act_led: ephy0_act_led-pins {
|
||||||
|
+ function = "ephy0_act_led";
|
||||||
|
+ pins = "gpio4";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy1_act_led: ephy1_act_led-pins {
|
||||||
|
+ function = "ephy1_act_led";
|
||||||
|
+ pins = "gpio5";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy2_act_led: ephy2_act_led-pins {
|
||||||
|
+ function = "ephy2_act_led";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_ephy3_act_led: ephy3_act_led-pins {
|
||||||
|
+ function = "ephy3_act_led";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led: serial_led-pins {
|
||||||
|
+ pinctrl_serial_led_data: serial_led_data-pins {
|
||||||
|
+ function = "serial_led_data";
|
||||||
|
+ pins = "gpio6";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_serial_led_clk: serial_led_clk-pins {
|
||||||
|
+ function = "serial_led_clk";
|
||||||
|
+ pins = "gpio7";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_act_led: inet_act_led-pins {
|
||||||
|
+ function = "inet_act_led";
|
||||||
|
+ pins = "gpio8";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_inet_fail_led: inet_fail_led-pins {
|
||||||
|
+ function = "inet_fail_led";
|
||||||
|
+ pins = "gpio9";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_dsl_led: dsl_led-pins {
|
||||||
|
+ function = "dsl_led";
|
||||||
|
+ pins = "gpio10";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_post_fail_led: post_fail_led-pins {
|
||||||
|
+ function = "post_fail_led";
|
||||||
|
+ pins = "gpio11";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_wlan_wps_led: wlan_wps_led-pins {
|
||||||
|
+ function = "wlan_wps_led";
|
||||||
|
+ pins = "gpio12";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_pwron: usb_pwron-pins {
|
||||||
|
+ function = "usb_pwron";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_device_led: usb_device_led-pins {
|
||||||
|
+ function = "usb_device_led";
|
||||||
|
+ pins = "gpio13";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pinctrl_usb_active: usb_active-pins {
|
||||||
|
+ function = "usb_active";
|
||||||
|
+ pins = "gpio40";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
@@ -1,7 +1,7 @@
|
|||||||
From e1764f96eb563a11c822ff91d1c6d7ed01c3925b Mon Sep 17 00:00:00 2001
|
From d28039fccf948a407de69106465caa465b1dcf32 Mon Sep 17 00:00:00 2001
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
||||||
Date: Fri, 24 Jun 2016 22:20:39 +0200
|
Date: Wed, 24 Mar 2021 09:19:23 +0100
|
||||||
Subject: [PATCH 12/12] pinctrl: add a pincontrol driver for BCM6318
|
Subject: [PATCH 22/22] pinctrl: add a pincontrol driver for BCM6318
|
||||||
MIME-Version: 1.0
|
MIME-Version: 1.0
|
||||||
Content-Type: text/plain; charset=UTF-8
|
Content-Type: text/plain; charset=UTF-8
|
||||||
Content-Transfer-Encoding: 8bit
|
Content-Transfer-Encoding: 8bit
|
||||||
@@ -11,48 +11,48 @@ to different functions. BCM6318 is similar to BCM6328 with the addition
|
|||||||
of a pad register, and the GPIO meaning of the mux register changes
|
of a pad register, and the GPIO meaning of the mux register changes
|
||||||
based on the GPIO number.
|
based on the GPIO number.
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
|
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
||||||
|
Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.com
|
||||||
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
||||||
---
|
---
|
||||||
drivers/pinctrl/bcm/Kconfig | 11 +
|
drivers/pinctrl/bcm/Kconfig | 8 +
|
||||||
drivers/pinctrl/bcm/Makefile | 1 +
|
drivers/pinctrl/bcm/Makefile | 1 +
|
||||||
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 674 ++++++++++++++++++++++++++
|
drivers/pinctrl/bcm/pinctrl-bcm6318.c | 498 ++++++++++++++++++++++++++
|
||||||
3 files changed, 686 insertions(+)
|
3 files changed, 507 insertions(+)
|
||||||
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
|
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6318.c
|
||||||
|
|
||||||
--- a/drivers/pinctrl/bcm/Kconfig
|
--- a/drivers/pinctrl/bcm/Kconfig
|
||||||
+++ b/drivers/pinctrl/bcm/Kconfig
|
+++ b/drivers/pinctrl/bcm/Kconfig
|
||||||
@@ -29,6 +29,17 @@ config PINCTRL_BCM2835
|
@@ -36,6 +36,14 @@ config PINCTRL_BCM63XX
|
||||||
help
|
select PINCONF
|
||||||
Say Y here to enable the Broadcom BCM2835 GPIO driver.
|
select PINMUX
|
||||||
|
|
||||||
+config PINCTRL_BCM6318
|
+config PINCTRL_BCM6318
|
||||||
+ bool "Broadcom BCM6318 GPIO driver"
|
+ bool "Broadcom BCM6318 GPIO driver"
|
||||||
+ depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
+ depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
+ select PINMUX
|
+ select PINCTRL_BCM63XX
|
||||||
+ select PINCONF
|
|
||||||
+ select GENERIC_PINCONF
|
|
||||||
+ select MFD_SYSCON
|
|
||||||
+ default BMIPS_GENERIC
|
+ default BMIPS_GENERIC
|
||||||
+ help
|
+ help
|
||||||
+ Say Y here to enable the Broadcom BCM6318 GPIO driver.
|
+ Say Y here to enable the Broadcom BCM6318 GPIO driver.
|
||||||
+
|
+
|
||||||
config PINCTRL_BCM6328
|
config PINCTRL_BCM6328
|
||||||
bool "Broadcom BCM6328 GPIO driver"
|
bool "Broadcom BCM6328 GPIO driver"
|
||||||
depends on OF_GPIO && (BMIPS_GENERIC || COMPILE_TEST)
|
depends on (BMIPS_GENERIC || COMPILE_TEST)
|
||||||
--- a/drivers/pinctrl/bcm/Makefile
|
--- a/drivers/pinctrl/bcm/Makefile
|
||||||
+++ b/drivers/pinctrl/bcm/Makefile
|
+++ b/drivers/pinctrl/bcm/Makefile
|
||||||
@@ -3,6 +3,7 @@
|
@@ -4,6 +4,7 @@
|
||||||
|
|
||||||
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
|
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
|
||||||
|
obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
|
||||||
+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
|
+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
|
||||||
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o
|
||||||
--- /dev/null
|
--- /dev/null
|
||||||
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
|
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
|
||||||
@@ -0,0 +1,674 @@
|
@@ -0,0 +1,498 @@
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
+// SPDX-License-Identifier: GPL-2.0+
|
||||||
+/*
|
+/*
|
||||||
+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO)
|
+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO)
|
||||||
@@ -61,36 +61,26 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
|
||||||
+ */
|
+ */
|
||||||
+
|
+
|
||||||
+#include <linux/bitops.h>
|
+#include <linux/bits.h>
|
||||||
+#include <linux/gpio.h>
|
+#include <linux/gpio/driver.h>
|
||||||
+#include <linux/kernel.h>
|
+#include <linux/kernel.h>
|
||||||
+#include <linux/mfd/syscon.h>
|
|
||||||
+#include <linux/of.h>
|
+#include <linux/of.h>
|
||||||
+#include <linux/of_gpio.h>
|
+#include <linux/pinctrl/pinmux.h>
|
||||||
+#include <linux/of_irq.h>
|
|
||||||
+#include <linux/platform_device.h>
|
+#include <linux/platform_device.h>
|
||||||
+#include <linux/regmap.h>
|
+#include <linux/regmap.h>
|
||||||
+
|
+
|
||||||
+#include <linux/pinctrl/machine.h>
|
|
||||||
+#include <linux/pinctrl/pinconf.h>
|
|
||||||
+#include <linux/pinctrl/pinconf-generic.h>
|
|
||||||
+#include <linux/pinctrl/pinmux.h>
|
|
||||||
+
|
|
||||||
+#include "../core.h"
|
|
||||||
+#include "../pinctrl-utils.h"
|
+#include "../pinctrl-utils.h"
|
||||||
+
|
+
|
||||||
+#define MODULE_NAME "bcm6318-pinctrl"
|
+#include "pinctrl-bcm63xx.h"
|
||||||
|
+
|
||||||
+#define BCM6318_NUM_GPIOS 50
|
+#define BCM6318_NUM_GPIOS 50
|
||||||
+#define BCM6318_NUM_MUX 48
|
+#define BCM6318_NUM_MUX 48
|
||||||
+
|
+
|
||||||
+#define BANK_SIZE sizeof(uint32_t)
|
|
||||||
+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE)
|
|
||||||
+
|
|
||||||
+#define BCM6318_DIROUT_REG 0x04
|
|
||||||
+#define BCM6318_DATA_REG 0x0c
|
|
||||||
+#define BCM6318_MODE_REG 0x18
|
+#define BCM6318_MODE_REG 0x18
|
||||||
+#define BCM6318_MUX_REG 0x1c
|
+#define BCM6318_MUX_REG 0x1c
|
||||||
|
+#define BCM6328_MUX_MASK GENMASK(1, 0)
|
||||||
+#define BCM6318_PAD_REG 0x54
|
+#define BCM6318_PAD_REG 0x54
|
||||||
|
+#define BCM6328_PAD_MASK GENMASK(3, 0)
|
||||||
+
|
+
|
||||||
+struct bcm6318_pingroup {
|
+struct bcm6318_pingroup {
|
||||||
+ const char *name;
|
+ const char *name;
|
||||||
@@ -107,16 +97,6 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ unsigned mux_val:2;
|
+ unsigned mux_val:2;
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+struct bcm6318_pinctrl {
|
|
||||||
+ struct device *dev;
|
|
||||||
+ struct regmap *regs;
|
|
||||||
+
|
|
||||||
+ struct pinctrl_dev *pctl_dev;
|
|
||||||
+ struct gpio_chip gpio_chip;
|
|
||||||
+ struct pinctrl_desc pctl_desc;
|
|
||||||
+ struct pinctrl_gpio_range gpio_range;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+static const struct pinctrl_pin_desc bcm6318_pins[] = {
|
+static const struct pinctrl_pin_desc bcm6318_pins[] = {
|
||||||
+ PINCTRL_PIN(0, "gpio0"),
|
+ PINCTRL_PIN(0, "gpio0"),
|
||||||
+ PINCTRL_PIN(1, "gpio1"),
|
+ PINCTRL_PIN(1, "gpio1"),
|
||||||
@@ -420,116 +400,14 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ BCM6318_MUX_FUN(usb_active, 2),
|
+ BCM6318_MUX_FUN(usb_active, 2),
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6318_bank_pin(unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return pin % PINS_PER_BANK;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
|
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
|
||||||
+{
|
+{
|
||||||
+ return BCM6318_MUX_REG + (pin / 16) * BANK_SIZE;
|
+ return BCM6318_MUX_REG + (pin / 16) * 4;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static inline unsigned int bcm6318_pad_off(unsigned int pin)
|
+static inline unsigned int bcm6318_pad_off(unsigned int pin)
|
||||||
+{
|
+{
|
||||||
+ return BCM6318_PAD_REG + (pin / 8) * BANK_SIZE;
|
+ return BCM6318_PAD_REG + (pin / 8) * 4;
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static inline unsigned int bcm6318_reg_off(unsigned int reg, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ return reg - (pin / PINS_PER_BANK) * BANK_SIZE;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6318_gpio_direction_input(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6318_bank_pin(pin);
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an input GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_input(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), 0);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6318_gpio_direction_output(struct gpio_chip *chip,
|
|
||||||
+ unsigned int pin, int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin);
|
|
||||||
+ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6318_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ /*
|
|
||||||
+ * Check with the pinctrl driver whether this pin is usable as
|
|
||||||
+ * an output GPIO
|
|
||||||
+ */
|
|
||||||
+ ret = pinctrl_gpio_direction_output(chip->base + pin);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, dirout, BIT(bank_pin), BIT(bank_pin));
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6318_gpio_get(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6318_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, data, &val);
|
|
||||||
+
|
|
||||||
+ return !!(val & BIT(bank_pin));
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6318_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
|
|
||||||
+{
|
|
||||||
+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int dirout = bcm6318_reg_off(BCM6318_DIROUT_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6318_bank_pin(pin);
|
|
||||||
+ unsigned int val;
|
|
||||||
+
|
|
||||||
+ regmap_read(pc->regs, dirout, &val);
|
|
||||||
+
|
|
||||||
+ if (val & BIT(bank_pin))
|
|
||||||
+ return GPIO_LINE_DIRECTION_OUT;
|
|
||||||
+
|
|
||||||
+ return GPIO_LINE_DIRECTION_IN;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static void bcm6318_gpio_set(struct gpio_chip *chip, unsigned int pin,
|
|
||||||
+ int value)
|
|
||||||
+{
|
|
||||||
+ struct bcm6318_pinctrl *pc = gpiochip_get_data(chip);
|
|
||||||
+ unsigned int data = bcm6318_reg_off(BCM6318_DATA_REG, pin);
|
|
||||||
+ unsigned int bank_pin = bcm6318_bank_pin(pin);
|
|
||||||
+ unsigned int val = value ? BIT(bank_pin) : 0;
|
|
||||||
+
|
|
||||||
+ regmap_update_bits(pc->regs, data, BIT(bank_pin), val);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+static int bcm6318_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
||||||
+{
|
|
||||||
+ char irq_name[7];
|
|
||||||
+
|
|
||||||
+ sprintf(irq_name, "gpio%d", gpio);
|
|
||||||
+
|
|
||||||
+ return of_irq_get_byname(chip->of_node, irq_name);
|
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
|
||||||
@@ -575,32 +453,32 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ return 0;
|
+ return 0;
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static inline void bcm6318_rmw_mux(struct bcm6318_pinctrl *pc, unsigned pin,
|
+static inline void bcm6318_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
|
||||||
+ unsigned int mode, unsigned int mux)
|
+ unsigned int mode, unsigned int mux)
|
||||||
+{
|
+{
|
||||||
+ if (pin < PINS_PER_BANK)
|
+ if (pin < BCM63XX_BANK_GPIOS)
|
||||||
+ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin),
|
+ regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin),
|
||||||
+ mode ? BIT(pin) : 0);
|
+ mode ? BIT(pin) : 0);
|
||||||
+
|
+
|
||||||
+ if (pin < BCM6318_NUM_MUX)
|
+ if (pin < BCM6318_NUM_MUX)
|
||||||
+ regmap_update_bits(pc->regs,
|
+ regmap_update_bits(pc->regs,
|
||||||
+ bcm6318_mux_off(pin),
|
+ bcm6318_mux_off(pin),
|
||||||
+ 3UL << ((pin % 16) * 2),
|
+ BCM6328_MUX_MASK << ((pin % 16) * 2),
|
||||||
+ mux << ((pin % 16) * 2));
|
+ mux << ((pin % 16) * 2));
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static inline void bcm6318_set_pad(struct bcm6318_pinctrl *pc, unsigned pin,
|
+static inline void bcm6318_set_pad(struct bcm63xx_pinctrl *pc, unsigned pin,
|
||||||
+ uint8_t val)
|
+ uint8_t val)
|
||||||
+{
|
+{
|
||||||
+ regmap_update_bits(pc->regs, bcm6318_pad_off(pin),
|
+ regmap_update_bits(pc->regs, bcm6318_pad_off(pin),
|
||||||
+ 0xfUL << ((pin % 8) * 4),
|
+ BCM6328_PAD_MASK << ((pin % 8) * 4),
|
||||||
+ val << ((pin % 8) * 4));
|
+ val << ((pin % 8) * 4));
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
|
||||||
+ unsigned selector, unsigned group)
|
+ unsigned selector, unsigned group)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6318_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+ const struct bcm6318_pingroup *pg = &bcm6318_groups[group];
|
+ const struct bcm6318_pingroup *pg = &bcm6318_groups[group];
|
||||||
+ const struct bcm6318_function *f = &bcm6318_funcs[selector];
|
+ const struct bcm6318_function *f = &bcm6318_funcs[selector];
|
||||||
+
|
+
|
||||||
@@ -613,7 +491,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+ struct pinctrl_gpio_range *range,
|
+ struct pinctrl_gpio_range *range,
|
||||||
+ unsigned offset)
|
+ unsigned offset)
|
||||||
+{
|
+{
|
||||||
+ struct bcm6318_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
+ struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
|
||||||
+
|
+
|
||||||
+ /* disable all functions using this pin */
|
+ /* disable all functions using this pin */
|
||||||
+ if (offset < 13) {
|
+ if (offset < 13) {
|
||||||
@@ -630,98 +508,44 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static struct pinctrl_ops bcm6318_pctl_ops = {
|
+static struct pinctrl_ops bcm6318_pctl_ops = {
|
||||||
+ .get_groups_count = bcm6318_pinctrl_get_group_count,
|
+ .dt_free_map = pinctrl_utils_free_map,
|
||||||
|
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
||||||
+ .get_group_name = bcm6318_pinctrl_get_group_name,
|
+ .get_group_name = bcm6318_pinctrl_get_group_name,
|
||||||
+ .get_group_pins = bcm6318_pinctrl_get_group_pins,
|
+ .get_group_pins = bcm6318_pinctrl_get_group_pins,
|
||||||
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
+ .get_groups_count = bcm6318_pinctrl_get_group_count,
|
||||||
+ .dt_free_map = pinctrl_utils_free_map,
|
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct pinmux_ops bcm6318_pmx_ops = {
|
+static struct pinmux_ops bcm6318_pmx_ops = {
|
||||||
+ .get_functions_count = bcm6318_pinctrl_get_func_count,
|
|
||||||
+ .get_function_name = bcm6318_pinctrl_get_func_name,
|
|
||||||
+ .get_function_groups = bcm6318_pinctrl_get_groups,
|
+ .get_function_groups = bcm6318_pinctrl_get_groups,
|
||||||
+ .set_mux = bcm6318_pinctrl_set_mux,
|
+ .get_function_name = bcm6318_pinctrl_get_func_name,
|
||||||
|
+ .get_functions_count = bcm6318_pinctrl_get_func_count,
|
||||||
+ .gpio_request_enable = bcm6318_gpio_request_enable,
|
+ .gpio_request_enable = bcm6318_gpio_request_enable,
|
||||||
|
+ .set_mux = bcm6318_pinctrl_set_mux,
|
||||||
+ .strict = true,
|
+ .strict = true,
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
|
+static const struct bcm63xx_pinctrl_soc bcm6318_soc = {
|
||||||
|
+ .ngpios = BCM6318_NUM_GPIOS,
|
||||||
|
+ .npins = ARRAY_SIZE(bcm6318_pins),
|
||||||
|
+ .pctl_ops = &bcm6318_pctl_ops,
|
||||||
|
+ .pins = bcm6318_pins,
|
||||||
|
+ .pmx_ops = &bcm6318_pmx_ops,
|
||||||
|
+};
|
||||||
|
+
|
||||||
+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
|
+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
|
||||||
+{
|
+{
|
||||||
+ struct device *dev = &pdev->dev;
|
+ return bcm63xx_pinctrl_probe(pdev, &bcm6318_soc, NULL);
|
||||||
+ struct device_node *np = dev->of_node;
|
|
||||||
+ struct bcm6318_pinctrl *pc;
|
|
||||||
+ int err;
|
|
||||||
+
|
|
||||||
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
|
|
||||||
+ if (!pc)
|
|
||||||
+ return -ENOMEM;
|
|
||||||
+
|
|
||||||
+ platform_set_drvdata(pdev, pc);
|
|
||||||
+ pc->dev = dev;
|
|
||||||
+
|
|
||||||
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
|
|
||||||
+ if (IS_ERR(pc->regs))
|
|
||||||
+ return PTR_ERR(pc->regs);
|
|
||||||
+
|
|
||||||
+ pc->gpio_chip.label = MODULE_NAME;
|
|
||||||
+ pc->gpio_chip.owner = THIS_MODULE;
|
|
||||||
+ pc->gpio_chip.request = gpiochip_generic_request;
|
|
||||||
+ pc->gpio_chip.free = gpiochip_generic_free;
|
|
||||||
+ pc->gpio_chip.direction_input = bcm6318_gpio_direction_input;
|
|
||||||
+ pc->gpio_chip.direction_output = bcm6318_gpio_direction_output;
|
|
||||||
+ pc->gpio_chip.get_direction = bcm6318_gpio_get_direction;
|
|
||||||
+ pc->gpio_chip.get = bcm6318_gpio_get;
|
|
||||||
+ pc->gpio_chip.set = bcm6318_gpio_set;
|
|
||||||
+ pc->gpio_chip.set_config = gpiochip_generic_config;
|
|
||||||
+ pc->gpio_chip.base = -1;
|
|
||||||
+ pc->gpio_chip.ngpio = BCM6318_NUM_GPIOS;
|
|
||||||
+ pc->gpio_chip.can_sleep = false;
|
|
||||||
+ pc->gpio_chip.parent = dev;
|
|
||||||
+ pc->gpio_chip.of_node = np;
|
|
||||||
+
|
|
||||||
+ if (of_get_property(np, "interrupt-names", NULL))
|
|
||||||
+ pc->gpio_chip.to_irq = bcm6318_gpio_to_irq;
|
|
||||||
+
|
|
||||||
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
|
|
||||||
+ if (err) {
|
|
||||||
+ dev_err(dev, "could not add GPIO chip\n");
|
|
||||||
+ return err;
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->pctl_desc.name = MODULE_NAME,
|
|
||||||
+ pc->pctl_desc.pins = bcm6318_pins,
|
|
||||||
+ pc->pctl_desc.npins = ARRAY_SIZE(bcm6318_pins),
|
|
||||||
+ pc->pctl_desc.pctlops = &bcm6318_pctl_ops,
|
|
||||||
+ pc->pctl_desc.pmxops = &bcm6318_pmx_ops,
|
|
||||||
+ pc->pctl_desc.owner = THIS_MODULE,
|
|
||||||
+
|
|
||||||
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
|
|
||||||
+ if (IS_ERR(pc->pctl_dev)) {
|
|
||||||
+ gpiochip_remove(&pc->gpio_chip);
|
|
||||||
+ return PTR_ERR(pc->pctl_dev);
|
|
||||||
+ }
|
|
||||||
+
|
|
||||||
+ pc->gpio_range.name = MODULE_NAME;
|
|
||||||
+ pc->gpio_range.npins = BCM6318_NUM_GPIOS;
|
|
||||||
+ pc->gpio_range.base = pc->gpio_chip.base;
|
|
||||||
+ pc->gpio_range.gc = &pc->gpio_chip;
|
|
||||||
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
|
|
||||||
+
|
|
||||||
+ dev_info(dev, "registered\n");
|
|
||||||
+
|
|
||||||
+ return 0;
|
|
||||||
+}
|
+}
|
||||||
+
|
+
|
||||||
+static const struct of_device_id bcm6318_pinctrl_match[] = {
|
+static const struct of_device_id bcm6318_pinctrl_match[] = {
|
||||||
+ { .compatible = "brcm,bcm6318-pinctrl", },
|
+ { .compatible = "brcm,bcm6318-pinctrl", },
|
||||||
+ { },
|
+ { /* sentinel */ }
|
||||||
+};
|
+};
|
||||||
+
|
+
|
||||||
+static struct platform_driver bcm6318_pinctrl_driver = {
|
+static struct platform_driver bcm6318_pinctrl_driver = {
|
||||||
+ .probe = bcm6318_pinctrl_probe,
|
+ .probe = bcm6318_pinctrl_probe,
|
||||||
+ .driver = {
|
+ .driver = {
|
||||||
+ .name = MODULE_NAME,
|
+ .name = "bcm6318-pinctrl",
|
||||||
+ .of_match_table = bcm6318_pinctrl_match,
|
+ .of_match_table = bcm6318_pinctrl_match,
|
||||||
+ },
|
+ },
|
||||||
+};
|
+};
|
||||||
@@ -1,182 +0,0 @@
|
|||||||
From 3b6d70e7bae0dbba02435c53f878a042d6d4bd4d Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
|
||||||
Date: Wed, 27 Jul 2016 11:33:56 +0200
|
|
||||||
Subject: [PATCH 01/12] Documentation: add BCM6328 pincontroller binding
|
|
||||||
documentation
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Add binding documentation for the pincontrol core found in BCM6328 SoCs.
|
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
---
|
|
||||||
.../pinctrl/brcm,bcm6328-pinctrl.yaml | 161 ++++++++++++++++++
|
|
||||||
1 file changed, 161 insertions(+)
|
|
||||||
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
|
|
||||||
@@ -0,0 +1,161 @@
|
|
||||||
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
||||||
+%YAML 1.2
|
|
||||||
+---
|
|
||||||
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
|
|
||||||
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
||||||
+
|
|
||||||
+title: Broadcom BCM6328 pin controller
|
|
||||||
+
|
|
||||||
+maintainers:
|
|
||||||
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
+
|
|
||||||
+description: |+
|
|
||||||
+ The pin controller node should be the child of a syscon node.
|
|
||||||
+
|
|
||||||
+ Refer to the the bindings described in
|
|
||||||
+ Documentation/devicetree/bindings/mfd/syscon.yaml
|
|
||||||
+
|
|
||||||
+properties:
|
|
||||||
+ compatible:
|
|
||||||
+ const: brcm,bcm6328-pinctrl
|
|
||||||
+
|
|
||||||
+ gpio-controller: true
|
|
||||||
+
|
|
||||||
+ '#gpio-cells':
|
|
||||||
+ description:
|
|
||||||
+ Specifies the pin number and flags, as defined in
|
|
||||||
+ include/dt-bindings/gpio/gpio.h
|
|
||||||
+ const: 2
|
|
||||||
+
|
|
||||||
+ interrupts-extended:
|
|
||||||
+ description:
|
|
||||||
+ One interrupt per each of the 4 GPIO ports supported by the controller,
|
|
||||||
+ sorted by port number ascending order.
|
|
||||||
+ minItems: 4
|
|
||||||
+ maxItems: 4
|
|
||||||
+
|
|
||||||
+patternProperties:
|
|
||||||
+ '^.*$':
|
|
||||||
+ if:
|
|
||||||
+ type: object
|
|
||||||
+ then:
|
|
||||||
+ properties:
|
|
||||||
+ function:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
|
|
||||||
+ led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
|
|
||||||
+ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
|
|
||||||
+
|
|
||||||
+ pins:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
|
|
||||||
+ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
|
|
||||||
+ usb_port1 ]
|
|
||||||
+
|
|
||||||
+required:
|
|
||||||
+ - compatible
|
|
||||||
+ - gpio-controller
|
|
||||||
+ - '#gpio-cells'
|
|
||||||
+
|
|
||||||
+additionalProperties: false
|
|
||||||
+
|
|
||||||
+examples:
|
|
||||||
+ - |
|
|
||||||
+ gpio@10000080 {
|
|
||||||
+ compatible = "syscon", "simple-mfd";
|
|
||||||
+ reg = <0x10000080 0x80>;
|
|
||||||
+
|
|
||||||
+ pinctrl: pinctrl {
|
|
||||||
+ compatible = "brcm,bcm6328-pinctrl";
|
|
||||||
+
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+
|
|
||||||
+ interrupts-extended = <&ext_intc 3 0>,
|
|
||||||
+ <&ext_intc 2 0>,
|
|
||||||
+ <&ext_intc 1 0>,
|
|
||||||
+ <&ext_intc 0 0>;
|
|
||||||
+ interrupt-names = "gpio12",
|
|
||||||
+ "gpio15",
|
|
||||||
+ "gpio23",
|
|
||||||
+ "gpio24";
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led: serial_led {
|
|
||||||
+ pinctrl_serial_led_data: serial_led_data {
|
|
||||||
+ function = "serial_led_data";
|
|
||||||
+ pins = "gpio6";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led_clk: serial_led_clk {
|
|
||||||
+ function = "serial_led_clk";
|
|
||||||
+ pins = "gpio7";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_inet_act_led: inet_act_led {
|
|
||||||
+ function = "inet_act_led";
|
|
||||||
+ pins = "gpio11";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pcie_clkreq: pcie_clkreq {
|
|
||||||
+ function = "pcie_clkreq";
|
|
||||||
+ pins = "gpio16";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
|
|
||||||
+ function = "led";
|
|
||||||
+ pins = "gpio17";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
|
|
||||||
+ function = "led";
|
|
||||||
+ pins = "gpio18";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
|
|
||||||
+ function = "led";
|
|
||||||
+ pins = "gpio19";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
|
|
||||||
+ function = "led";
|
|
||||||
+ pins = "gpio20";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy0_act_led: ephy0_act_led {
|
|
||||||
+ function = "ephy0_act_led";
|
|
||||||
+ pins = "gpio25";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy1_act_led: ephy1_act_led {
|
|
||||||
+ function = "ephy1_act_led";
|
|
||||||
+ pins = "gpio26";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy2_act_led: ephy2_act_led {
|
|
||||||
+ function = "ephy2_act_led";
|
|
||||||
+ pins = "gpio27";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy3_act_led: ephy3_act_led {
|
|
||||||
+ function = "ephy3_act_led";
|
|
||||||
+ pins = "gpio28";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_hsspi_cs1: hsspi_cs1 {
|
|
||||||
+ function = "hsspi_cs1";
|
|
||||||
+ pins = "hsspi_cs1";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_port1_device: usb_port1_device {
|
|
||||||
+ function = "usb_device_port";
|
|
||||||
+ pins = "usb_port1";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_port1_host: usb_port1_host {
|
|
||||||
+ function = "usb_host_port";
|
|
||||||
+ pins = "usb_port1";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
@@ -1,152 +0,0 @@
|
|||||||
From 9fbcbe08479bcb3609952b66627e2d612173229a Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
|
||||||
Date: Wed, 27 Jul 2016 11:36:00 +0200
|
|
||||||
Subject: [PATCH 03/12] Documentation: add BCM6358 pincontroller binding
|
|
||||||
documentation
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Add binding documentation for the pincontrol core found in BCM6358 SoCs.
|
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
---
|
|
||||||
.../pinctrl/brcm,bcm6358-pinctrl.yaml | 131 ++++++++++++++++++
|
|
||||||
1 file changed, 131 insertions(+)
|
|
||||||
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
|
|
||||||
@@ -0,0 +1,131 @@
|
|
||||||
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
||||||
+%YAML 1.2
|
|
||||||
+---
|
|
||||||
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
|
|
||||||
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
||||||
+
|
|
||||||
+title: Broadcom BCM6358 pin controller
|
|
||||||
+
|
|
||||||
+maintainers:
|
|
||||||
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
+
|
|
||||||
+description: |+
|
|
||||||
+ The pin controller node should be the child of a syscon node.
|
|
||||||
+
|
|
||||||
+ Refer to the the bindings described in
|
|
||||||
+ Documentation/devicetree/bindings/mfd/syscon.yaml
|
|
||||||
+
|
|
||||||
+properties:
|
|
||||||
+ compatible:
|
|
||||||
+ const: brcm,bcm6358-pinctrl
|
|
||||||
+
|
|
||||||
+ gpio-controller: true
|
|
||||||
+
|
|
||||||
+ '#gpio-cells':
|
|
||||||
+ description:
|
|
||||||
+ Specifies the pin number and flags, as defined in
|
|
||||||
+ include/dt-bindings/gpio/gpio.h
|
|
||||||
+ const: 2
|
|
||||||
+
|
|
||||||
+ interrupts-extended:
|
|
||||||
+ description:
|
|
||||||
+ One interrupt per each of the 4 GPIO ports supported by the controller,
|
|
||||||
+ sorted by port number ascending order.
|
|
||||||
+ minItems: 6
|
|
||||||
+ maxItems: 6
|
|
||||||
+
|
|
||||||
+patternProperties:
|
|
||||||
+ '^.*$':
|
|
||||||
+ if:
|
|
||||||
+ type: object
|
|
||||||
+ then:
|
|
||||||
+ properties:
|
|
||||||
+ function:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
|
|
||||||
+ pwm_syn_clk, sys_irq ]
|
|
||||||
+
|
|
||||||
+ pins:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
|
|
||||||
+ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
|
|
||||||
+
|
|
||||||
+required:
|
|
||||||
+ - compatible
|
|
||||||
+ - gpio-controller
|
|
||||||
+ - '#gpio-cells'
|
|
||||||
+
|
|
||||||
+additionalProperties: false
|
|
||||||
+
|
|
||||||
+examples:
|
|
||||||
+ - |
|
|
||||||
+ gpio@fffe0080 {
|
|
||||||
+ compatible = "syscon", "simple-mfd";
|
|
||||||
+ reg = <0xfffe0080 0x80>;
|
|
||||||
+
|
|
||||||
+ pinctrl: pinctrl {
|
|
||||||
+ compatible = "brcm,bcm6358-pinctrl";
|
|
||||||
+
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+
|
|
||||||
+ interrupts-extended = <&ext_intc1 0 0>,
|
|
||||||
+ <&ext_intc1 1 0>,
|
|
||||||
+ <&ext_intc0 0 0>,
|
|
||||||
+ <&ext_intc0 1 0>,
|
|
||||||
+ <&ext_intc0 2 0>,
|
|
||||||
+ <&ext_intc0 3 0>;
|
|
||||||
+ interrupt-names = "gpio32",
|
|
||||||
+ "gpio33",
|
|
||||||
+ "gpio34",
|
|
||||||
+ "gpio35",
|
|
||||||
+ "gpio36",
|
|
||||||
+ "gpio37";
|
|
||||||
+
|
|
||||||
+ pinctrl_ebi_cs: ebi_cs {
|
|
||||||
+ function = "ebi_cs";
|
|
||||||
+ groups = "ebi_cs_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1: uart1 {
|
|
||||||
+ function = "uart1";
|
|
||||||
+ groups = "uart1_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led: serial_led {
|
|
||||||
+ function = "serial_led";
|
|
||||||
+ groups = "serial_led_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_legacy_led: legacy_led {
|
|
||||||
+ function = "legacy_led";
|
|
||||||
+ groups = "legacy_led_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_led: led {
|
|
||||||
+ function = "led";
|
|
||||||
+ groups = "led_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs_23: spi_cs {
|
|
||||||
+ function = "spi_cs";
|
|
||||||
+ groups = "spi_cs_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_utopia: utopia {
|
|
||||||
+ function = "utopia";
|
|
||||||
+ groups = "utopia_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pwm_syn_clk: pwm_syn_clk {
|
|
||||||
+ function = "pwm_syn_clk";
|
|
||||||
+ groups = "pwm_syn_clk_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_sys_irq: sys_irq {
|
|
||||||
+ function = "sys_irq";
|
|
||||||
+ groups = "sys_irq_grp";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
@@ -1,261 +0,0 @@
|
|||||||
From 1c839f287a008023b3b3ae7d892b4d25e3d224ad Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
|
||||||
Date: Wed, 27 Jul 2016 11:36:18 +0200
|
|
||||||
Subject: [PATCH 05/12] Documentation: add BCM6362 pincontroller binding
|
|
||||||
documentation
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Add binding documentation for the pincontrol core found in BCM6362 SoCs.
|
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
---
|
|
||||||
.../pinctrl/brcm,bcm6362-pinctrl.yaml | 240 ++++++++++++++++++
|
|
||||||
1 file changed, 240 insertions(+)
|
|
||||||
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
|
|
||||||
@@ -0,0 +1,240 @@
|
|
||||||
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
||||||
+%YAML 1.2
|
|
||||||
+---
|
|
||||||
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
|
|
||||||
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
||||||
+
|
|
||||||
+title: Broadcom BCM6362 pin controller
|
|
||||||
+
|
|
||||||
+maintainers:
|
|
||||||
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
+
|
|
||||||
+description: |+
|
|
||||||
+ The pin controller node should be the child of a syscon node.
|
|
||||||
+
|
|
||||||
+ Refer to the the bindings described in
|
|
||||||
+ Documentation/devicetree/bindings/mfd/syscon.yaml
|
|
||||||
+
|
|
||||||
+properties:
|
|
||||||
+ compatible:
|
|
||||||
+ const: brcm,bcm6362-pinctrl
|
|
||||||
+
|
|
||||||
+ gpio-controller: true
|
|
||||||
+
|
|
||||||
+ '#gpio-cells':
|
|
||||||
+ description:
|
|
||||||
+ Specifies the pin number and flags, as defined in
|
|
||||||
+ include/dt-bindings/gpio/gpio.h
|
|
||||||
+ const: 2
|
|
||||||
+
|
|
||||||
+ interrupts-extended:
|
|
||||||
+ description:
|
|
||||||
+ One interrupt per each of the 4 GPIO ports supported by the controller,
|
|
||||||
+ sorted by port number ascending order.
|
|
||||||
+ minItems: 4
|
|
||||||
+ maxItems: 4
|
|
||||||
+
|
|
||||||
+patternProperties:
|
|
||||||
+ '^.*$':
|
|
||||||
+ if:
|
|
||||||
+ type: object
|
|
||||||
+ then:
|
|
||||||
+ properties:
|
|
||||||
+ function:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
|
|
||||||
+ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
|
|
||||||
+ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
|
|
||||||
+ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
|
|
||||||
+ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
|
|
||||||
+ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
|
|
||||||
+ ext_irq2, ext_irq3, nand ]
|
|
||||||
+
|
|
||||||
+ pins:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
|
|
||||||
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
|
|
||||||
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
|
|
||||||
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
|
|
||||||
+
|
|
||||||
+required:
|
|
||||||
+ - compatible
|
|
||||||
+ - gpio-controller
|
|
||||||
+ - '#gpio-cells'
|
|
||||||
+
|
|
||||||
+additionalProperties: false
|
|
||||||
+
|
|
||||||
+examples:
|
|
||||||
+ - |
|
|
||||||
+ gpio@10000080 {
|
|
||||||
+ compatible = "syscon", "simple-mfd";
|
|
||||||
+ reg = <0x10000080 0x80>;
|
|
||||||
+
|
|
||||||
+ pinctrl: pinctrl {
|
|
||||||
+ compatible = "brcm,bcm6362-pinctrl";
|
|
||||||
+
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+
|
|
||||||
+ interrupts-extended = <&ext_intc 0 0>,
|
|
||||||
+ <&ext_intc 1 0>,
|
|
||||||
+ <&ext_intc 2 0>,
|
|
||||||
+ <&ext_intc 3 0>;
|
|
||||||
+ interrupt-names = "gpio24",
|
|
||||||
+ "gpio25",
|
|
||||||
+ "gpio26",
|
|
||||||
+ "gpio27";
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_device_led: usb_device_led {
|
|
||||||
+ function = "usb_device_led";
|
|
||||||
+ pins = "gpio0";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_sys_irq: sys_irq {
|
|
||||||
+ function = "sys_irq";
|
|
||||||
+ pins = "gpio1";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led: serial_led {
|
|
||||||
+ pinctrl_serial_led_clk: serial_led_clk {
|
|
||||||
+ function = "serial_led_clk";
|
|
||||||
+ pins = "gpio2";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led_data: serial_led_data {
|
|
||||||
+ function = "serial_led_data";
|
|
||||||
+ pins = "gpio3";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led_data: robosw_led_data {
|
|
||||||
+ function = "robosw_led_data";
|
|
||||||
+ pins = "gpio4";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led_clk: robosw_led_clk {
|
|
||||||
+ function = "robosw_led_clk";
|
|
||||||
+ pins = "gpio5";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led0: robosw_led0 {
|
|
||||||
+ function = "robosw_led0";
|
|
||||||
+ pins = "gpio6";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led1: robosw_led1 {
|
|
||||||
+ function = "robosw_led1";
|
|
||||||
+ pins = "gpio7";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_inet_led: inet_led {
|
|
||||||
+ function = "inet_led";
|
|
||||||
+ pins = "gpio8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs2: spi_cs2 {
|
|
||||||
+ function = "spi_cs2";
|
|
||||||
+ pins = "gpio9";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs3: spi_cs3 {
|
|
||||||
+ function = "spi_cs3";
|
|
||||||
+ pins = "gpio10";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ntr_pulse: ntr_pulse {
|
|
||||||
+ function = "ntr_pulse";
|
|
||||||
+ pins = "gpio11";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1_scts: uart1_scts {
|
|
||||||
+ function = "uart1_scts";
|
|
||||||
+ pins = "gpio12";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1_srts: uart1_srts {
|
|
||||||
+ function = "uart1_srts";
|
|
||||||
+ pins = "gpio13";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1: uart1 {
|
|
||||||
+ pinctrl_uart1_sdin: uart1_sdin {
|
|
||||||
+ function = "uart1_sdin";
|
|
||||||
+ pins = "gpio14";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1_sdout: uart1_sdout {
|
|
||||||
+ function = "uart1_sdout";
|
|
||||||
+ pins = "gpio15";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_adsl_spi: adsl_spi {
|
|
||||||
+ pinctrl_adsl_spi_miso: adsl_spi_miso {
|
|
||||||
+ function = "adsl_spi_miso";
|
|
||||||
+ pins = "gpio16";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi {
|
|
||||||
+ function = "adsl_spi_mosi";
|
|
||||||
+ pins = "gpio17";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_adsl_spi_clk: adsl_spi_clk {
|
|
||||||
+ function = "adsl_spi_clk";
|
|
||||||
+ pins = "gpio18";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_adsl_spi_cs: adsl_spi_cs {
|
|
||||||
+ function = "adsl_spi_cs";
|
|
||||||
+ pins = "gpio19";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy0_led: ephy0_led {
|
|
||||||
+ function = "ephy0_led";
|
|
||||||
+ pins = "gpio20";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy1_led: ephy1_led {
|
|
||||||
+ function = "ephy1_led";
|
|
||||||
+ pins = "gpio21";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy2_led: ephy2_led {
|
|
||||||
+ function = "ephy2_led";
|
|
||||||
+ pins = "gpio22";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy3_led: ephy3_led {
|
|
||||||
+ function = "ephy3_led";
|
|
||||||
+ pins = "gpio23";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ext_irq0: ext_irq0 {
|
|
||||||
+ function = "ext_irq0";
|
|
||||||
+ pins = "gpio24";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ext_irq1: ext_irq1 {
|
|
||||||
+ function = "ext_irq1";
|
|
||||||
+ pins = "gpio25";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ext_irq2: ext_irq2 {
|
|
||||||
+ function = "ext_irq2";
|
|
||||||
+ pins = "gpio26";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ext_irq3: ext_irq3 {
|
|
||||||
+ function = "ext_irq3";
|
|
||||||
+ pins = "gpio27";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_nand: nand {
|
|
||||||
+ function = "nand";
|
|
||||||
+ group = "nand_grp";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
@@ -1,276 +0,0 @@
|
|||||||
From 12f1d5123ee405266596eaea238d9810e0628d18 Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
|
||||||
Date: Wed, 27 Jul 2016 11:36:51 +0200
|
|
||||||
Subject: [PATCH 07/12] Documentation: add BCM6368 pincontroller binding
|
|
||||||
documentation
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Add binding documentation for the pincontrol core found in BCM6368 SoCs.
|
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
---
|
|
||||||
.../pinctrl/brcm,bcm6368-pinctrl.yaml | 255 ++++++++++++++++++
|
|
||||||
1 file changed, 255 insertions(+)
|
|
||||||
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
|
|
||||||
@@ -0,0 +1,255 @@
|
|
||||||
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
||||||
+%YAML 1.2
|
|
||||||
+---
|
|
||||||
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
|
|
||||||
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
||||||
+
|
|
||||||
+title: Broadcom BCM6368 pin controller
|
|
||||||
+
|
|
||||||
+maintainers:
|
|
||||||
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
+
|
|
||||||
+description: |+
|
|
||||||
+ The pin controller node should be the child of a syscon node.
|
|
||||||
+
|
|
||||||
+ Refer to the the bindings described in
|
|
||||||
+ Documentation/devicetree/bindings/mfd/syscon.yaml
|
|
||||||
+
|
|
||||||
+properties:
|
|
||||||
+ compatible:
|
|
||||||
+ const: brcm,bcm6368-pinctrl
|
|
||||||
+
|
|
||||||
+ gpio-controller: true
|
|
||||||
+
|
|
||||||
+ '#gpio-cells':
|
|
||||||
+ description:
|
|
||||||
+ Specifies the pin number and flags, as defined in
|
|
||||||
+ include/dt-bindings/gpio/gpio.h
|
|
||||||
+ const: 2
|
|
||||||
+
|
|
||||||
+ interrupts-extended:
|
|
||||||
+ description:
|
|
||||||
+ One interrupt per each of the 6 GPIO ports supported by the controller,
|
|
||||||
+ sorted by port number ascending order.
|
|
||||||
+ minItems: 6
|
|
||||||
+ maxItems: 6
|
|
||||||
+
|
|
||||||
+patternProperties:
|
|
||||||
+ '^.*$':
|
|
||||||
+ if:
|
|
||||||
+ type: object
|
|
||||||
+ then:
|
|
||||||
+ properties:
|
|
||||||
+ function:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
|
|
||||||
+ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
|
|
||||||
+ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
|
|
||||||
+ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
|
|
||||||
+ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
|
|
||||||
+ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
|
|
||||||
+ spi_cs5, uart1 ]
|
|
||||||
+
|
|
||||||
+ pins:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
|
|
||||||
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
|
|
||||||
+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
|
|
||||||
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
|
|
||||||
+ gpio31, uart1_grp ]
|
|
||||||
+
|
|
||||||
+required:
|
|
||||||
+ - compatible
|
|
||||||
+ - gpio-controller
|
|
||||||
+ - '#gpio-cells'
|
|
||||||
+
|
|
||||||
+additionalProperties: false
|
|
||||||
+
|
|
||||||
+examples:
|
|
||||||
+ - |
|
|
||||||
+ gpio@10000080 {
|
|
||||||
+ compatible = "syscon", "simple-mfd";
|
|
||||||
+ reg = <0x10000080 0x80>;
|
|
||||||
+
|
|
||||||
+ pinctrl: pinctrl {
|
|
||||||
+ compatible = "brcm,bcm6368-pinctrl";
|
|
||||||
+
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+
|
|
||||||
+ interrupts-extended = <&ext_intc1 0 0>,
|
|
||||||
+ <&ext_intc1 1 0>,
|
|
||||||
+ <&ext_intc0 0 0>,
|
|
||||||
+ <&ext_intc0 1 0>,
|
|
||||||
+ <&ext_intc0 2 0>,
|
|
||||||
+ <&ext_intc0 3 0>;
|
|
||||||
+ interrupt-names = "gpio32",
|
|
||||||
+ "gpio33",
|
|
||||||
+ "gpio34",
|
|
||||||
+ "gpio35",
|
|
||||||
+ "gpio36",
|
|
||||||
+ "gpio37";
|
|
||||||
+
|
|
||||||
+ pinctrl_analog_afe_0: analog_afe_0 {
|
|
||||||
+ function = "analog_afe_0";
|
|
||||||
+ pins = "gpio0";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_analog_afe_1: analog_afe_1 {
|
|
||||||
+ function = "analog_afe_1";
|
|
||||||
+ pins = "gpio1";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_sys_irq: sys_irq {
|
|
||||||
+ function = "sys_irq";
|
|
||||||
+ pins = "gpio2";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led: serial_led {
|
|
||||||
+ pinctrl_serial_led_data: serial_led_data {
|
|
||||||
+ function = "serial_led_data";
|
|
||||||
+ pins = "gpio3";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led_clk: serial_led_clk {
|
|
||||||
+ function = "serial_led_clk";
|
|
||||||
+ pins = "gpio4";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_inet_led: inet_led {
|
|
||||||
+ function = "inet_led";
|
|
||||||
+ pins = "gpio5";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy0_led: ephy0_led {
|
|
||||||
+ function = "ephy0_led";
|
|
||||||
+ pins = "gpio6";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy1_led: ephy1_led {
|
|
||||||
+ function = "ephy1_led";
|
|
||||||
+ pins = "gpio7";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy2_led: ephy2_led {
|
|
||||||
+ function = "ephy2_led";
|
|
||||||
+ pins = "gpio8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy3_led: ephy3_led {
|
|
||||||
+ function = "ephy3_led";
|
|
||||||
+ pins = "gpio9";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led_data: robosw_led_data {
|
|
||||||
+ function = "robosw_led_data";
|
|
||||||
+ pins = "gpio10";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led_clk: robosw_led_clk {
|
|
||||||
+ function = "robosw_led_clk";
|
|
||||||
+ pins = "gpio11";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led0: robosw_led0 {
|
|
||||||
+ function = "robosw_led0";
|
|
||||||
+ pins = "gpio12";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led1: robosw_led1 {
|
|
||||||
+ function = "robosw_led1";
|
|
||||||
+ pins = "gpio13";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_device_led: usb_device_led {
|
|
||||||
+ function = "usb_device_led";
|
|
||||||
+ pins = "gpio14";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pci: pci {
|
|
||||||
+ pinctrl_pci_req1: pci_req1 {
|
|
||||||
+ function = "pci_req1";
|
|
||||||
+ pins = "gpio16";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pci_gnt1: pci_gnt1 {
|
|
||||||
+ function = "pci_gnt1";
|
|
||||||
+ pins = "gpio17";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pci_intb: pci_intb {
|
|
||||||
+ function = "pci_intb";
|
|
||||||
+ pins = "gpio18";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pci_req0: pci_req0 {
|
|
||||||
+ function = "pci_req0";
|
|
||||||
+ pins = "gpio19";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pci_gnt0: pci_gnt0 {
|
|
||||||
+ function = "pci_gnt0";
|
|
||||||
+ pins = "gpio20";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pcmcia: pcmcia {
|
|
||||||
+ pinctrl_pcmcia_cd1: pcmcia_cd1 {
|
|
||||||
+ function = "pcmcia_cd1";
|
|
||||||
+ pins = "gpio22";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pcmcia_cd2: pcmcia_cd2 {
|
|
||||||
+ function = "pcmcia_cd2";
|
|
||||||
+ pins = "gpio23";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pcmcia_vs1: pcmcia_vs1 {
|
|
||||||
+ function = "pcmcia_vs1";
|
|
||||||
+ pins = "gpio24";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pcmcia_vs2: pcmcia_vs2 {
|
|
||||||
+ function = "pcmcia_vs2";
|
|
||||||
+ pins = "gpio25";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ebi_cs2: ebi_cs2 {
|
|
||||||
+ function = "ebi_cs2";
|
|
||||||
+ pins = "gpio26";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ebi_cs3: ebi_cs3 {
|
|
||||||
+ function = "ebi_cs3";
|
|
||||||
+ pins = "gpio27";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs2: spi_cs2 {
|
|
||||||
+ function = "spi_cs2";
|
|
||||||
+ pins = "gpio28";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs3: spi_cs3 {
|
|
||||||
+ function = "spi_cs3";
|
|
||||||
+ pins = "gpio29";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs4: spi_cs4 {
|
|
||||||
+ function = "spi_cs4";
|
|
||||||
+ pins = "gpio30";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_spi_cs5: spi_cs5 {
|
|
||||||
+ function = "spi_cs5";
|
|
||||||
+ pins = "gpio31";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_uart1: uart1 {
|
|
||||||
+ function = "uart1";
|
|
||||||
+ group = "uart1_grp";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
@@ -1,220 +0,0 @@
|
|||||||
From 826266914f8397c996d2d4d821b315d614bfc325 Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
|
||||||
Date: Wed, 27 Jul 2016 11:37:08 +0200
|
|
||||||
Subject: [PATCH 09/12] Documentation: add BCM63268 pincontroller binding
|
|
||||||
documentation
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Add binding documentation for the pincontrol core found in the BCM63268
|
|
||||||
family SoCs.
|
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
---
|
|
||||||
.../pinctrl/brcm,bcm63268-pinctrl.yaml | 198 ++++++++++++++++++
|
|
||||||
1 file changed, 198 insertions(+)
|
|
||||||
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
|
|
||||||
@@ -0,0 +1,198 @@
|
|
||||||
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
||||||
+%YAML 1.2
|
|
||||||
+---
|
|
||||||
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
|
|
||||||
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
||||||
+
|
|
||||||
+title: Broadcom BCM63268 pin controller
|
|
||||||
+
|
|
||||||
+maintainers:
|
|
||||||
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
+
|
|
||||||
+description: |+
|
|
||||||
+ The pin controller node should be the child of a syscon node.
|
|
||||||
+
|
|
||||||
+ Refer to the the bindings described in
|
|
||||||
+ Documentation/devicetree/bindings/mfd/syscon.yaml
|
|
||||||
+
|
|
||||||
+properties:
|
|
||||||
+ compatible:
|
|
||||||
+ const: brcm,bcm63268-pinctrl
|
|
||||||
+
|
|
||||||
+ gpio-controller: true
|
|
||||||
+
|
|
||||||
+ '#gpio-cells':
|
|
||||||
+ description:
|
|
||||||
+ Specifies the pin number and flags, as defined in
|
|
||||||
+ include/dt-bindings/gpio/gpio.h
|
|
||||||
+ const: 2
|
|
||||||
+
|
|
||||||
+ interrupts-extended:
|
|
||||||
+ description:
|
|
||||||
+ One interrupt per each of the 4 GPIO ports supported by the controller,
|
|
||||||
+ sorted by port number ascending order.
|
|
||||||
+ minItems: 4
|
|
||||||
+ maxItems: 4
|
|
||||||
+
|
|
||||||
+patternProperties:
|
|
||||||
+ '^.*$':
|
|
||||||
+ if:
|
|
||||||
+ type: object
|
|
||||||
+ then:
|
|
||||||
+ properties:
|
|
||||||
+ function:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
|
|
||||||
+ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
|
|
||||||
+ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
|
|
||||||
+ nand, gpio35_alt, dectpd, vdsl_phy_override_0,
|
|
||||||
+ vdsl_phy_override_1, vdsl_phy_override_2,
|
|
||||||
+ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
|
|
||||||
+
|
|
||||||
+ pins:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
|
|
||||||
+ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
|
|
||||||
+ dectpd_grp, vdsl_phy_override_0_grp,
|
|
||||||
+ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
|
|
||||||
+ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
|
|
||||||
+
|
|
||||||
+required:
|
|
||||||
+ - compatible
|
|
||||||
+ - gpio-controller
|
|
||||||
+ - '#gpio-cells'
|
|
||||||
+
|
|
||||||
+additionalProperties: false
|
|
||||||
+
|
|
||||||
+examples:
|
|
||||||
+ - |
|
|
||||||
+ gpio@100000c0 {
|
|
||||||
+ compatible = "syscon", "simple-mfd";
|
|
||||||
+ reg = <0x100000c0 0x80>;
|
|
||||||
+
|
|
||||||
+ pinctrl: pinctrl {
|
|
||||||
+ compatible = "brcm,bcm63268-pinctrl";
|
|
||||||
+
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+
|
|
||||||
+ interrupts-extended = <&ext_intc 0 0>,
|
|
||||||
+ <&ext_intc 1 0>,
|
|
||||||
+ <&ext_intc 2 0>,
|
|
||||||
+ <&ext_intc 3 0>;
|
|
||||||
+ interrupt-names = "gpio32",
|
|
||||||
+ "gpio33",
|
|
||||||
+ "gpio34",
|
|
||||||
+ "gpio35";
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led: serial_led {
|
|
||||||
+ pinctrl_serial_led_clk: serial_led_clk {
|
|
||||||
+ function = "serial_led_clk";
|
|
||||||
+ pins = "gpio0";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led_data: serial_led_data {
|
|
||||||
+ function = "serial_led_data";
|
|
||||||
+ pins = "gpio1";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_hsspi_cs4: hsspi_cs4 {
|
|
||||||
+ function = "hsspi_cs4";
|
|
||||||
+ pins = "gpio16";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_hsspi_cs5: hsspi_cs5 {
|
|
||||||
+ function = "hsspi_cs5";
|
|
||||||
+ pins = "gpio17";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_hsspi_cs6: hsspi_cs6 {
|
|
||||||
+ function = "hsspi_cs6";
|
|
||||||
+ pins = "gpio8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_hsspi_cs7: hsspi_cs7 {
|
|
||||||
+ function = "hsspi_cs7";
|
|
||||||
+ pins = "gpio9";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_adsl_spi: adsl_spi {
|
|
||||||
+ pinctrl_adsl_spi_miso: adsl_spi_miso {
|
|
||||||
+ function = "adsl_spi_miso";
|
|
||||||
+ pins = "gpio18";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi {
|
|
||||||
+ function = "adsl_spi_mosi";
|
|
||||||
+ pins = "gpio19";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_vreq_clk: vreq_clk {
|
|
||||||
+ function = "vreq_clk";
|
|
||||||
+ pins = "gpio22";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_pcie_clkreq_b: pcie_clkreq_b {
|
|
||||||
+ function = "pcie_clkreq_b";
|
|
||||||
+ pins = "gpio23";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led_clk: robosw_led_clk {
|
|
||||||
+ function = "robosw_led_clk";
|
|
||||||
+ pins = "gpio30";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_robosw_led_data: robosw_led_data {
|
|
||||||
+ function = "robosw_led_data";
|
|
||||||
+ pins = "gpio31";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_nand: nand {
|
|
||||||
+ function = "nand";
|
|
||||||
+ group = "nand_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_gpio35_alt: gpio35_alt {
|
|
||||||
+ function = "gpio35_alt";
|
|
||||||
+ pin = "gpio35";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_dectpd: dectpd {
|
|
||||||
+ function = "dectpd";
|
|
||||||
+ group = "dectpd_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
|
|
||||||
+ function = "vdsl_phy_override_0";
|
|
||||||
+ group = "vdsl_phy_override_0_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
|
|
||||||
+ function = "vdsl_phy_override_1";
|
|
||||||
+ group = "vdsl_phy_override_1_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
|
|
||||||
+ function = "vdsl_phy_override_2";
|
|
||||||
+ group = "vdsl_phy_override_2_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
|
|
||||||
+ function = "vdsl_phy_override_3";
|
|
||||||
+ group = "vdsl_phy_override_3_grp";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_dsl_gpio8: dsl_gpio8 {
|
|
||||||
+ function = "dsl_gpio8";
|
|
||||||
+ group = "dsl_gpio8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_dsl_gpio9: dsl_gpio9 {
|
|
||||||
+ function = "dsl_gpio9";
|
|
||||||
+ group = "dsl_gpio9";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
@@ -1,194 +0,0 @@
|
|||||||
From f909bf5d5cf3db6b35c082f27f7982dfcb1447c2 Mon Sep 17 00:00:00 2001
|
|
||||||
From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
|
|
||||||
Date: Wed, 27 Jul 2016 11:38:05 +0200
|
|
||||||
Subject: [PATCH 11/12] Documentation: add BCM6318 pincontroller binding
|
|
||||||
documentation
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
Add binding documentation for the pincontrol core found in BCM6318 SoCs.
|
|
||||||
|
|
||||||
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
---
|
|
||||||
.../pinctrl/brcm,bcm6318-pinctrl.yaml | 173 ++++++++++++++++++
|
|
||||||
1 file changed, 173 insertions(+)
|
|
||||||
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
|
|
||||||
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
|
|
||||||
@@ -0,0 +1,173 @@
|
|
||||||
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
||||||
+%YAML 1.2
|
|
||||||
+---
|
|
||||||
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
|
|
||||||
+$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
||||||
+
|
|
||||||
+title: Broadcom BCM6318 pin controller
|
|
||||||
+
|
|
||||||
+maintainers:
|
|
||||||
+ - Álvaro Fernández Rojas <noltari@gmail.com>
|
|
||||||
+ - Jonas Gorski <jonas.gorski@gmail.com>
|
|
||||||
+
|
|
||||||
+description: |+
|
|
||||||
+ The pin controller node should be the child of a syscon node.
|
|
||||||
+
|
|
||||||
+ Refer to the the bindings described in
|
|
||||||
+ Documentation/devicetree/bindings/mfd/syscon.yaml
|
|
||||||
+
|
|
||||||
+properties:
|
|
||||||
+ compatible:
|
|
||||||
+ const: brcm,bcm6318-pinctrl
|
|
||||||
+
|
|
||||||
+ gpio-controller: true
|
|
||||||
+
|
|
||||||
+ '#gpio-cells':
|
|
||||||
+ description:
|
|
||||||
+ Specifies the pin number and flags, as defined in
|
|
||||||
+ include/dt-bindings/gpio/gpio.h
|
|
||||||
+ const: 2
|
|
||||||
+
|
|
||||||
+ interrupts-extended:
|
|
||||||
+ description:
|
|
||||||
+ One interrupt per each of the 2 GPIO ports supported by the controller,
|
|
||||||
+ sorted by port number ascending order.
|
|
||||||
+ minItems: 2
|
|
||||||
+ maxItems: 2
|
|
||||||
+
|
|
||||||
+patternProperties:
|
|
||||||
+ '^.*$':
|
|
||||||
+ if:
|
|
||||||
+ type: object
|
|
||||||
+ then:
|
|
||||||
+ properties:
|
|
||||||
+ function:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
|
|
||||||
+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
|
|
||||||
+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
|
|
||||||
+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
|
|
||||||
+ usb_device_led, usb_active ]
|
|
||||||
+
|
|
||||||
+ pins:
|
|
||||||
+ $ref: "/schemas/types.yaml#/definitions/string"
|
|
||||||
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
|
|
||||||
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
|
|
||||||
+
|
|
||||||
+required:
|
|
||||||
+ - compatible
|
|
||||||
+ - gpio-controller
|
|
||||||
+ - '#gpio-cells'
|
|
||||||
+
|
|
||||||
+additionalProperties: false
|
|
||||||
+
|
|
||||||
+examples:
|
|
||||||
+ - |
|
|
||||||
+ gpio@10000080 {
|
|
||||||
+ compatible = "syscon", "simple-mfd";
|
|
||||||
+ reg = <0x10000080 0x80>;
|
|
||||||
+
|
|
||||||
+ pinctrl: pinctrl {
|
|
||||||
+ compatible = "brcm,bcm6318-pinctrl";
|
|
||||||
+
|
|
||||||
+ gpio-controller;
|
|
||||||
+ #gpio-cells = <2>;
|
|
||||||
+
|
|
||||||
+ interrupts-extended = <&ext_intc 0 0>,
|
|
||||||
+ <&ext_intc 1 0>;
|
|
||||||
+ interrupt-names = "gpio33",
|
|
||||||
+ "gpio34";
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy0_spd_led: ephy0_spd_led {
|
|
||||||
+ function = "ephy0_spd_led";
|
|
||||||
+ pins = "gpio0";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy1_spd_led: ephy1_spd_led {
|
|
||||||
+ function = "ephy1_spd_led";
|
|
||||||
+ pins = "gpio1";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy2_spd_led: ephy2_spd_led {
|
|
||||||
+ function = "ephy2_spd_led";
|
|
||||||
+ pins = "gpio2";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy3_spd_led: ephy3_spd_led {
|
|
||||||
+ function = "ephy3_spd_led";
|
|
||||||
+ pins = "gpio3";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy0_act_led: ephy0_act_led {
|
|
||||||
+ function = "ephy0_act_led";
|
|
||||||
+ pins = "gpio4";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy1_act_led: ephy1_act_led {
|
|
||||||
+ function = "ephy1_act_led";
|
|
||||||
+ pins = "gpio5";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy2_act_led: ephy2_act_led {
|
|
||||||
+ function = "ephy2_act_led";
|
|
||||||
+ pins = "gpio6";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_ephy3_act_led: ephy3_act_led {
|
|
||||||
+ function = "ephy3_act_led";
|
|
||||||
+ pins = "gpio7";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led: serial_led {
|
|
||||||
+ pinctrl_serial_led_data: serial_led_data {
|
|
||||||
+ function = "serial_led_data";
|
|
||||||
+ pins = "gpio6";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_serial_led_clk: serial_led_clk {
|
|
||||||
+ function = "serial_led_clk";
|
|
||||||
+ pins = "gpio7";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_inet_act_led: inet_act_led {
|
|
||||||
+ function = "inet_act_led";
|
|
||||||
+ pins = "gpio8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_inet_fail_led: inet_fail_led {
|
|
||||||
+ function = "inet_fail_led";
|
|
||||||
+ pins = "gpio9";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_dsl_led: dsl_led {
|
|
||||||
+ function = "dsl_led";
|
|
||||||
+ pins = "gpio10";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_post_fail_led: post_fail_led {
|
|
||||||
+ function = "post_fail_led";
|
|
||||||
+ pins = "gpio11";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_wlan_wps_led: wlan_wps_led {
|
|
||||||
+ function = "wlan_wps_led";
|
|
||||||
+ pins = "gpio12";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_pwron: usb_pwron {
|
|
||||||
+ function = "usb_pwron";
|
|
||||||
+ pins = "gpio13";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_device_led: usb_device_led {
|
|
||||||
+ function = "usb_device_led";
|
|
||||||
+ pins = "gpio13";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pinctrl_usb_active: usb_active {
|
|
||||||
+ function = "usb_active";
|
|
||||||
+ pins = "gpio40";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
Reference in New Issue
Block a user