ramips: add support for Kroks Rt-Pot mXw DS RSIM router
Aka "Kroks KNdRt31R19". Ported from v19.07.8 of OpenWrt fork: see https://github.com/kroks-free/openwrt for support of other models. Device specs: - CPU: MediaTek MT7628AN - Flash: 16MB SPI NOR - RAM: 64MB - Bootloader: U-Boot - Ethernet: 1x 10/100 Mbps - 2.4 GHz: b/g/n SoC - mPCIe: 1x (usually equipped with an LTE modem by vendor) - Buttons: reset - LEDs: 1x Modem, 1x Injector, 1x Wi-Fi, 1x Status Flashing: - sysupgrade image via stock firmware WEB interface. - U-Boot launches a WEB server if Reset button is held during power up. Server IP: 192.168.1.1 SIM card switching: The device supports up to 4 SIM cards - 2 locally on board and 2 on remote SIM-injector. By default, 1-st local SIM is active. To switch to e.g. 1-st remote SIM: echo 0 > /sys/class/gpio/modem1power/value echo 0 > /sys/class/gpio/modem1sim1/value echo 1 > /sys/class/gpio/modem1rsim1/value echo 1 > /sys/class/gpio/modem1power/value MAC addresses as verified by OEM firmware: vendor OpenWrt source LAN eth0 factory 0x4 (label) 2g wlan0 label Signed-off-by: Kroks <dev@kroks.ru> [butirsky@gmail.com: port to master; drop dts-v1] Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
This commit is contained in:
		 Andrey Butirsky
					Andrey Butirsky
				
			
				
					committed by
					
						 Hauke Mehrtens
						Hauke Mehrtens
					
				
			
			
				
	
			
			
			 Hauke Mehrtens
						Hauke Mehrtens
					
				
			
						parent
						
							837fd23c80
						
					
				
				
					commit
					0a79c77a4e
				
			| @@ -37,6 +37,7 @@ beeline,smartbox-turbo) | |||||||
| 	;; | 	;; | ||||||
| buffalo,wsr-1166dhp|\ | buffalo,wsr-1166dhp|\ | ||||||
| buffalo,wsr-600dhp|\ | buffalo,wsr-600dhp|\ | ||||||
|  | kroks,kndrt31r19|\ | ||||||
| mediatek,linkit-smart-7688|\ | mediatek,linkit-smart-7688|\ | ||||||
| samknows,whitebox-v8|\ | samknows,whitebox-v8|\ | ||||||
| xiaomi,mi-router-4c|\ | xiaomi,mi-router-4c|\ | ||||||
|   | |||||||
							
								
								
									
										116
									
								
								target/linux/ramips/dts/mt7628an_kroks.dtsi
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										116
									
								
								target/linux/ramips/dts/mt7628an_kroks.dtsi
									
									
									
									
									
										Normal file
									
								
							| @@ -0,0 +1,116 @@ | |||||||
|  | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||||
|  |  | ||||||
|  | #include "mt7628an.dtsi" | ||||||
|  |  | ||||||
|  | #include <dt-bindings/input/input.h> | ||||||
|  | #include <dt-bindings/gpio/gpio.h> | ||||||
|  |  | ||||||
|  | / { | ||||||
|  | 	aliases { | ||||||
|  | 		led-boot = &led_status; | ||||||
|  | 		led-failsafe = &led_status; | ||||||
|  | 		led-running = &led_status; | ||||||
|  | 		led-upgrade = &led_status; | ||||||
|  | 		serial1 = &uart1; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	leds { | ||||||
|  | 		compatible = "gpio-leds"; | ||||||
|  |  | ||||||
|  | 		led_status: status { | ||||||
|  | 			label = "led:status"; | ||||||
|  | 			gpios = <&gpio 2 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		wifi { | ||||||
|  | 			label = "led:wifi"; | ||||||
|  | 			gpios = <&gpio 44 GPIO_ACTIVE_LOW>; | ||||||
|  | 			linux,default-trigger = "phy0tpt"; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	keys { | ||||||
|  | 		compatible = "gpio-keys"; | ||||||
|  |  | ||||||
|  | 		reset { | ||||||
|  | 			label = "reset"; | ||||||
|  | 			gpios = <&gpio 38 GPIO_ACTIVE_LOW>; | ||||||
|  | 			linux,code = <KEY_RESTART>; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &spi0 { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	flash@0 { | ||||||
|  | 		compatible = "jedec,spi-nor"; | ||||||
|  | 		reg = <0>; | ||||||
|  | 		spi-max-frequency = <25000000>; | ||||||
|  | 		m25p,fast-read; | ||||||
|  |  | ||||||
|  | 		partitions: partitions { | ||||||
|  | 			compatible = "fixed-partitions"; | ||||||
|  | 			#address-cells = <1>; | ||||||
|  | 			#size-cells = <1>; | ||||||
|  |  | ||||||
|  | 			partition@0 { | ||||||
|  | 				label = "u-boot"; | ||||||
|  | 				reg = <0x0 0x30000>; | ||||||
|  | 			}; | ||||||
|  |  | ||||||
|  | 			partition@30000 { | ||||||
|  | 				label = "u-boot-env"; | ||||||
|  | 				reg = <0x30000 0x10000>; | ||||||
|  | 			}; | ||||||
|  |  | ||||||
|  | 			factory: partition@40000 { | ||||||
|  | 				label = "factory"; | ||||||
|  | 				reg = <0x40000 0x10000>; | ||||||
|  | 			}; | ||||||
|  |  | ||||||
|  | 			partition@50000 { | ||||||
|  | 				compatible = "denx,uimage"; | ||||||
|  | 				label = "firmware"; | ||||||
|  | 				reg = <0x50000 0xfb0000>; | ||||||
|  | 			}; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &state_default { | ||||||
|  | 	gpio_reset { | ||||||
|  | 		groups = "wdt"; | ||||||
|  | 		function = "gpio"; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	p0led_an { | ||||||
|  | 		groups = "p0led_an"; | ||||||
|  | 		function = "p0led_an"; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &factory { | ||||||
|  | 	compatible = "nvmem-cells"; | ||||||
|  | 	#address-cells = <1>; | ||||||
|  | 	#size-cells = <1>; | ||||||
|  |  | ||||||
|  | 	macaddr_factory_4: macaddr@4 { | ||||||
|  | 		reg = <0x4 0x6>; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | ðernet { | ||||||
|  | 	nvmem-cells = <&macaddr_factory_4>; | ||||||
|  | 	nvmem-cell-names = "mac-address"; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &wmac { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	mediatek,mtd-eeprom = <&factory 0x0000>; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &uart1 { | ||||||
|  | 	status = "okay"; | ||||||
|  | }; | ||||||
							
								
								
									
										64
									
								
								target/linux/ramips/dts/mt7628an_kroks_kndrt31r19.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										64
									
								
								target/linux/ramips/dts/mt7628an_kroks_kndrt31r19.dts
									
									
									
									
									
										Normal file
									
								
							| @@ -0,0 +1,64 @@ | |||||||
|  | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||||
|  |  | ||||||
|  | #include "mt7628an_kroks.dtsi" | ||||||
|  |  | ||||||
|  | / { | ||||||
|  | 	compatible = "kroks,kndrt31r19", "mediatek,mt7628an-soc"; | ||||||
|  | 	model = "Kroks KNdRt31R19"; | ||||||
|  |  | ||||||
|  | 	leds { | ||||||
|  | 		status { | ||||||
|  | 			label = "red:status"; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		wifi { | ||||||
|  | 			label = "yellow:wifi"; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	gpio_export { | ||||||
|  | 		compatible = "gpio-export"; | ||||||
|  | 		#size-cells = <0>; | ||||||
|  |  | ||||||
|  | 		modem1power { | ||||||
|  | 			gpio-export,name = "modem1power"; | ||||||
|  | 			gpio-export,output = <0>; | ||||||
|  | 			gpios = <&gpio 1 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		modem1sim1 { | ||||||
|  | 			gpio-export,name = "modem1sim1"; | ||||||
|  | 			gpio-export,output = <1>; | ||||||
|  | 			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		modem1sim2 { | ||||||
|  | 			gpio-export,name = "modem1sim2"; | ||||||
|  | 			gpio-export,output = <0>; | ||||||
|  | 			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		modem1rsim1 { | ||||||
|  | 			gpio-export,name = "modem1rsim1"; | ||||||
|  | 			gpio-export,output = <0>; | ||||||
|  | 			gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		modem1rsim2 { | ||||||
|  | 			gpio-export,name = "modem1rsim2"; | ||||||
|  | 			gpio-export,output = <0>; | ||||||
|  | 			gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &esw { | ||||||
|  | 	mediatek,portmap = <0x2f>; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &state_default { | ||||||
|  | 	gpio { | ||||||
|  | 		groups = "i2s", "i2c", "p4led_an", "p3led_an", "wled_an"; | ||||||
|  | 		function = "gpio"; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
| @@ -310,6 +310,17 @@ define Device/jotale_js76x8-32m | |||||||
| endef | endef | ||||||
| TARGET_DEVICES += jotale_js76x8-32m | TARGET_DEVICES += jotale_js76x8-32m | ||||||
|  |  | ||||||
|  | define Device/kroks_kndrt31r19 | ||||||
|  |   IMAGE_SIZE := 16064k | ||||||
|  |   DEVICE_VENDOR := Kroks | ||||||
|  |   DEVICE_MODEL := Rt-Pot mXw DS RSIM | ||||||
|  |   DEVICE_ALT0_VENDOR := Kroks | ||||||
|  |   DEVICE_ALT0_MODEL := KNdRt31R19 | ||||||
|  |   DEVICE_PACKAGES := kmod-usb2 uqmi | ||||||
|  |   SUPPORTED_DEVICES += kndrt31r19 | ||||||
|  | endef | ||||||
|  | TARGET_DEVICES += kroks_kndrt31r19 | ||||||
|  |  | ||||||
| define Device/mediatek_linkit-smart-7688 | define Device/mediatek_linkit-smart-7688 | ||||||
|   IMAGE_SIZE := 32448k |   IMAGE_SIZE := 32448k | ||||||
|   DEVICE_VENDOR := MediaTek |   DEVICE_VENDOR := MediaTek | ||||||
|   | |||||||
| @@ -131,6 +131,7 @@ ramips_setup_interfaces() | |||||||
| 		ucidef_add_switch "switch0" \ | 		ucidef_add_switch "switch0" \ | ||||||
| 			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" | 			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" | ||||||
| 		;; | 		;; | ||||||
|  | 	kroks,kndrt31r19|\ | ||||||
| 	tplink,tl-mr3020-v3) | 	tplink,tl-mr3020-v3) | ||||||
| 		ucidef_add_switch "switch0" \ | 		ucidef_add_switch "switch0" \ | ||||||
| 			"0:lan" "6@eth0" | 			"0:lan" "6@eth0" | ||||||
|   | |||||||
		Reference in New Issue
	
	Block a user