domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: add support for Ubiquiti PowerBeam M (XW)

Browse Source 
This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400,
a 802.11n wireless with a feed+dish form factor. This device was previously
supported by the ar71xx loco-m-xw firmware.

Specifications:
 - Atheros AR9342 SoC
 - 64 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in
 - Power and LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1)

Flashing via stock GUI:
 - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see
   https://openwrt.org/toh/ubiquiti/powerbeam installation instructions)
 - Upload the factory image via AirOS web GUI.

Flashing via TFTP:
 - Use a pointy tool (e.g., unbent paperclip) to keep the
   reset button pressed.
 - Power on the device (keep reset button pressed).
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button.
 - The device starts a TFTP server at 192.168.1.20.
 - Set a static IP on the computer (e.g., 192.168.1.21/24).
 - Upload via tftp the factory image:
    $ tftp 192.168.1.20
    tftp> bin
    tftp> trace
    tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin

WARNING: so far, no non-destructive method has been discovered for
opening the enclosure to reach the serial console. Internal photos
are available here: https://fcc.io/SWX-NBM5HP

Signed-off-by: Russell Senior <russell@personaltelco.net>
This commit is contained in:
Russell Senior
2021-06-04 17:27:48 -07:00
committed by Adrian Schmutzler
parent 3c3a96df3f
commit 12eb5b2384
4 changed files with 44 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

34
target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts Normal file
View File

@@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9342_ubnt_xw.dtsi"
/ {
compatible = "ubnt,powerbeam-m-xw", "ubnt,xw", "qca,ar9342";
model = "Ubiquiti PowerBeam M (XW)";
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x02000000 0x00000101 0x00001313>;
phy-mode = "rgmii-id";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};

1
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -397,6 +397,7 @@ ubnt,nanostation-loco-m-xw|\
ubnt,nanostation-m|\
ubnt,nanostation-m-xw|\
ubnt,picostation-m|\
ubnt,powerbeam-m-xw|\
ubnt,powerbridge-m|\
ubnt,rocket-m)
ucidef_set_rssimon "wlan0" "200000" "1"

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -85,6 +85,7 @@ ath79_setup_interfaces()
ubnt,picostation-m|\
ubnt,powerbeam-5ac-500|\
ubnt,powerbeam-5ac-gen2|\
ubnt,powerbeam-m-xw|\
ubnt,powerbridge-m|\
ubnt,rocket-5ac-lite|\
ubnt,rocket-m|\

8
target/linux/ath79/image/generic-ubnt.mk
View File

@@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2
endef
TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
define Device/ubnt_powerbeam-m-xw
$(Device/ubnt-xw)
DEVICE_MODEL := PowerBeam M
DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += loco-m-xw
endef
TARGET_DEVICES += ubnt_powerbeam-m-xw
define Device/ubnt_powerbridge-m
$(Device/ubnt-xm)
SOC := ar7241