domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ipq40xx: add support for AVM FRITZ!Repeater 3000

Browse Source 
Hardware
--------
CPU:   Qualcomm IPQ4019
RAM:   256M (NANYA NT5CC128M16JR-EK)
FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI)
ETH:   Qualcomm QCA8072
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
WiFi5: QCA9984 4T4R 4SS n/ac
LED:    - Connect green/blue/red
        - Power green
BTN:   WPS/Connect
UART:  115200n8 3.3V
       VCC - RX - TX - GND (Square is VCC)

Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz3000'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ3000.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz3000.bin uboot0
   > mtd write /path/to/uboot-fritz3000.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
2019-03-11 18:05:32 +01:00
committed by Christian Lamparter
parent 5389db72e3
commit 148d29d47b
11 changed files with 555 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
package/boot/uboot-fritz4040/Makefile
View File

@@ -25,6 +25,11 @@ define U-Boot/Default
UBOOT_IMAGE:=uboot-$(1).bin
endef
define U-Boot/fritz3000
NAME:=FritzRepeater 3000
BUILD_DEVICES:=avm_fritzrepeater-3000
endef
define U-Boot/fritz4040
NAME:=FritzBox 4040
BUILD_DEVICES:=avm_fritzbox-4040
@@ -61,6 +66,6 @@ define Package/u-boot/install
$(INSTALL_BIN) $(PKG_BUILD_DIR)/upload-to-f4040.sh $(1)/
endef
UBOOT_TARGETS := fritz4040 fritz7530
UBOOT_TARGETS := fritz3000 fritz4040 fritz7530
$(eval $(call BuildPackage/U-Boot))

3
package/firmware/ipq-wifi/Makefile
View File

@@ -18,7 +18,7 @@ endef
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:=alfa-network_ap120c-ac asus_map-ac2200 avm_fritzbox-7530 engenius_eap1300 linksys_ea6350v3 qxwlan_e2600ac
ALLWIFIBOARDS:=alfa-network_ap120c-ac asus_map-ac2200 avm_fritzbox-7530 avm_fritzrepeater-3000 engenius_eap1300 linksys_ea6350v3 qxwlan_e2600ac
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
@@ -57,6 +57,7 @@ $(eval $(call generate-ipq-wifi-package,alfa-network_ap120c-ac,board-alfa-networ
$(eval $(call generate-ipq-wifi-package,asus_map-ac2200,board-map-ac2200.bin,ASUS MAP-AC2200))
$(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))
$(eval $(call generate-ipq-wifi-package,avm_fritzbox-7530,board-avm_fritzbox-7530.bin,AVM FRITZ!Box 7530))
$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-3000,board-avm_fritzrepeater-3000.bin,AVM FRITZ!Repeater 3000))
$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,board-qxwlan-e2600ac.bin,Qxwlan E2600AC))

BIN
package/firmware/ipq-wifi/board-avm_fritzrepeater-3000.bin Normal file
View File

Binary file not shown.

1
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@@ -37,6 +37,7 @@ ipq40xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
avm,fritzrepeater-3000|\
compex,wpj428)
ucidef_set_interface_lan "eth0 eth1"
;;

10
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -111,6 +111,10 @@ case "$FIRMWARE" in
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
openmesh,a62)
ath10kcal_extract "0:ART" 36864 12064
;;
@@ -135,7 +139,8 @@ case "$FIRMWARE" in
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
avm,fritzbox-7530)
avm,fritzbox-7530 |\
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
@@ -183,7 +188,8 @@ case "$FIRMWARE" in
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
avm,fritzbox-7530)
avm,fritzbox-7530 |\
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;

1
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@@ -49,6 +49,7 @@ platform_do_upgrade() {
8dev,jalapeno |\
alfa-network,ap120c-ac |\
avm,fritzbox-7530 |\
avm,fritzrepeater-3000|\
qxwlan,e2600ac-c2)
nand_do_upgrade "$ARGV"
;;

260
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts Normal file
View File

@@ -0,0 +1,260 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Repeater 3000";
compatible = "avm,fritzrepeater-3000";
aliases {
led-boot = &power_led;
led-failsafe = &power_led;
led-running = &power_led;
led-upgrade = &power_led;
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
key {
compatible = "gpio-keys";
connect {
label = "Connect";
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
connect_red {
label = "fritzwlan-3000:red:connect";
gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
};
connect_green {
label = "fritzwlan-3000:green:connect";
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
};
connect_blue {
label = "fritzwlan-3000:blue:connect";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
};
power_led: power {
label = "fritzwlan-3000:green:power";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x000000 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x080000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5350000>;
/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
/* QCA9984 */
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
ieee80211-freq-limit = <5470000 5875000>;
/* Uses the reference BDF */
};
};
};

264
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts Normal file
View File

@@ -0,0 +1,264 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Repeater 3000";
compatible = "avm,fritzrepeater-3000";
aliases {
led-boot = &power_led;
led-failsafe = &power_led;
led-running = &power_led;
led-upgrade = &power_led;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
key {
compatible = "gpio-keys";
connect {
label = "Connect";
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
connect_red {
label = "fritzwlan-3000:red:connect";
gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
};
connect_green {
label = "fritzwlan-3000:green:connect";
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
};
connect_blue {
label = "fritzwlan-3000:blue:connect";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
};
power_led: power {
label = "fritzwlan-3000:green:power";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x000000 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x080000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5350000>;
/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
/* QCA9984 */
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
ieee80211-freq-limit = <5470000 5875000>;
/* Uses the reference BDF */
};
};
};

9
target/linux/ipq40xx/image/Makefile
View File

@@ -130,6 +130,15 @@ define Device/avm_fritzbox-7530
endef
TARGET_DEVICES += avm_fritzbox-7530
define Device/avm_fritzrepeater-3000
$(call Device/FitImageLzma)
DEVICE_DTS := qcom-ipq4019-fritzrepeater-3000
DEVICE_TITLE := AVM Fritz!Repeater 3000
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-3000
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += avm_fritzrepeater-3000
define Device/compex_wpj428
$(call Device/FitImage)
DEVICE_DTS := qcom-ipq4028-wpj428

3
target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
View File

@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -697,7 +697,27 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -697,7 +697,28 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -29,6 +29,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-qxwlan-e2600ac-c1.dtb \
+ qcom-ipq4019-qxwlan-e2600ac-c2.dtb \

3
target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
View File

@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -785,11 +785,30 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -785,11 +785,31 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -32,6 +32,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-qxwlan-e2600ac-c1.dtb \
+ qcom-ipq4019-qxwlan-e2600ac-c2.dtb \