ath79: mikrotik: stack ar9344 devices to single dtsi
Most of boards from MikroTik with AR9344 SoC (supported and un-supported) replicate the same schematic, so stack common device nodes to a single dtsi. ar9344_mikrotik_routerboard-16m-nor.dtsi: - remove include paragraph and wmac node, make it single nor flash node for others dts to include ar9344_mikrotik_routerboard-lhg-5nd.dts: - move all of the nodes to new file ar9344_mikrotik_routerboard.dtsi and leave only power, user and lan LEDs which differ from sxt-5nd-r2 and other yet unsupported devices ar9344_mikrotik_routerboard-sxt-5n.dtsi: - remove, it made no sense to keep it, as only ar9344_mikrotik_routerboard-sxt-5nd-r2.dts included this file and added only compatible and model ar9344_mikrotik_routerboard-sxt-5nd-r2.dts: - include ar9344_mikrotik_routerboard.dtsi - add nand gpio activating node, beeper, additional LEDs and flash chips which previously have been in ar9344_mikrotik_routerboard-sxt-5n.dtsi ar9344_mikrotik_routerboard.dtsi: - inherited most of the content from ar9344_mikrotik_routerboard-lhg-5nd.dts except three LEDs - add wmac node, removed from ar9344_mikrotik_routerboard-16m-nor.dtsi Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
This commit is contained in:
		 Tomasz Maciej Nowak
					Tomasz Maciej Nowak
				
			
				
					committed by
					
						 Hauke Mehrtens
						Hauke Mehrtens
					
				
			
			
				
	
			
			
			 Hauke Mehrtens
						Hauke Mehrtens
					
				
			
						parent
						
							522a60cd31
						
					
				
				
					commit
					173d864253
				
			| @@ -1,7 +1,5 @@ | |||||||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||||
|  |  | ||||||
| #include "ar9344.dtsi" |  | ||||||
|  |  | ||||||
| &spi { | &spi { | ||||||
| 	status = "okay"; | 	status = "okay"; | ||||||
|  |  | ||||||
| @@ -55,9 +53,3 @@ | |||||||
| 		}; | 		}; | ||||||
| 	}; | 	}; | ||||||
| }; | }; | ||||||
|  |  | ||||||
| &wmac { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	qca,no-eeprom; |  | ||||||
| }; |  | ||||||
|   | |||||||
| @@ -1,55 +1,20 @@ | |||||||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||||
|  |  | ||||||
|  | #include "ar9344_mikrotik_routerboard.dtsi" | ||||||
| #include "ar9344_mikrotik_routerboard-16m-nor.dtsi" | #include "ar9344_mikrotik_routerboard-16m-nor.dtsi" | ||||||
|  |  | ||||||
| #include <dt-bindings/gpio/gpio.h> |  | ||||||
| #include <dt-bindings/input/input.h> |  | ||||||
|  |  | ||||||
| / { | / { | ||||||
| 	compatible = "mikrotik,routerboard-lhg-5nd", "qca,ar9344"; | 	compatible = "mikrotik,routerboard-lhg-5nd", "qca,ar9344"; | ||||||
| 	model = "MikroTik RouterBOARD LHG 5nD"; | 	model = "MikroTik RouterBOARD LHG 5nD"; | ||||||
|  | }; | ||||||
|  |  | ||||||
| 	aliases { | &leds { | ||||||
| 		led-boot = &led_user; |  | ||||||
| 		led-failsafe = &led_user; |  | ||||||
| 		led-running = &led_user; |  | ||||||
| 		led-upgrade = &led_user; |  | ||||||
| 	}; |  | ||||||
|  |  | ||||||
| 	leds { |  | ||||||
| 		compatible = "gpio-leds"; |  | ||||||
|  |  | ||||||
| 	power { | 	power { | ||||||
| 		label = "blue:power"; | 		label = "blue:power"; | ||||||
| 		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; | 		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; | ||||||
| 		default-state = "on"; | 		default-state = "on"; | ||||||
| 	}; | 	}; | ||||||
|  |  | ||||||
| 		rssilow { |  | ||||||
| 			label = "green:rssilow"; |  | ||||||
| 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssimediumlow { |  | ||||||
| 			label = "green:rssimediumlow"; |  | ||||||
| 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssimedium { |  | ||||||
| 			label = "green:rssimedium"; |  | ||||||
| 			gpios = <&gpio 4 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssimediumhigh { |  | ||||||
| 			label = "green:rssimediumhigh"; |  | ||||||
| 			gpios = <&gpio 21 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssihigh { |  | ||||||
| 			label = "green:rssihigh"; |  | ||||||
| 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 	led_user: user { | 	led_user: user { | ||||||
| 		label = "white:user"; | 		label = "white:user"; | ||||||
| 		gpios = <&gpio 20 GPIO_ACTIVE_LOW>; | 		gpios = <&gpio 20 GPIO_ACTIVE_LOW>; | ||||||
| @@ -59,33 +24,4 @@ | |||||||
| 		label = "green:lan"; | 		label = "green:lan"; | ||||||
| 		gpios = <&gpio 14 GPIO_ACTIVE_LOW>; | 		gpios = <&gpio 14 GPIO_ACTIVE_LOW>; | ||||||
| 	}; | 	}; | ||||||
| 	}; |  | ||||||
|  |  | ||||||
| 	keys { |  | ||||||
| 		compatible = "gpio-keys"; |  | ||||||
|  |  | ||||||
| 		reset { |  | ||||||
| 			label = "reset"; |  | ||||||
| 			linux,code = <KEY_RESTART>; |  | ||||||
| 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |  | ||||||
| 			debounce-interval = <60>; |  | ||||||
| 		}; |  | ||||||
| 	}; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| ð0 { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	phy-handle = <&swphy0>; |  | ||||||
|  |  | ||||||
| 	gmac-config { |  | ||||||
| 		device = <&gmac>; |  | ||||||
| 		switch-phy-swap = <1>; |  | ||||||
| 	}; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| ð1 { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	compatible = "syscon", "simple-mfd"; |  | ||||||
| }; | }; | ||||||
|   | |||||||
| @@ -1,185 +0,0 @@ | |||||||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |  | ||||||
|  |  | ||||||
| #include "ar9344.dtsi" |  | ||||||
|  |  | ||||||
| #include <dt-bindings/gpio/gpio.h> |  | ||||||
| #include <dt-bindings/input/input.h> |  | ||||||
|  |  | ||||||
| / { |  | ||||||
| 	compatible = "mikrotik,routerboard-sxt-5n", "qca,ar9344"; |  | ||||||
| 	model = "MikroTik SXT 5N platform"; |  | ||||||
|  |  | ||||||
| 	aliases { |  | ||||||
| 		led-boot = &led_user; |  | ||||||
| 		led-failsafe = &led_user; |  | ||||||
| 		led-running = &led_user; |  | ||||||
| 		led-upgrade = &led_user; |  | ||||||
| 	}; |  | ||||||
|  |  | ||||||
| 	leds { |  | ||||||
| 		compatible = "gpio-leds"; |  | ||||||
|  |  | ||||||
| 		power { |  | ||||||
| 			label = "green:power"; |  | ||||||
| 			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; |  | ||||||
| 			default-state = "on"; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssilow { |  | ||||||
| 			label = "green:rssilow"; |  | ||||||
| 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssimediumlow { |  | ||||||
| 			label = "green:rssimediumlow"; |  | ||||||
| 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssimedium { |  | ||||||
| 			label = "green:rssimedium"; |  | ||||||
| 			gpios = <&gpio 4 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssimediumhigh { |  | ||||||
| 			label = "green:rssimediumhigh"; |  | ||||||
| 			gpios = <&gpio 21 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		rssihigh { |  | ||||||
| 			label = "green:rssihigh"; |  | ||||||
| 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		led_user: user { |  | ||||||
| 			label = "green:user"; |  | ||||||
| 			gpios = <&gpio 3 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
| 	}; |  | ||||||
|  |  | ||||||
| 	keys { |  | ||||||
| 		compatible = "gpio-keys"; |  | ||||||
|  |  | ||||||
| 		reset { |  | ||||||
| 			label = "reset"; |  | ||||||
| 			linux,code = <KEY_RESTART>; |  | ||||||
| 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |  | ||||||
| 			debounce-interval = <60>; |  | ||||||
| 		}; |  | ||||||
| 	}; |  | ||||||
|  |  | ||||||
| 	gpio-export { |  | ||||||
| 		compatible = "gpio-export"; |  | ||||||
|  |  | ||||||
| 		gpio_nand_power { |  | ||||||
| 			gpio-export,name = "sxt5n:power:nand"; |  | ||||||
| 			gpio-export,output = <0>; |  | ||||||
| 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |  | ||||||
| 		}; |  | ||||||
| 	}; |  | ||||||
|  |  | ||||||
| 	beeper { |  | ||||||
| 		compatible = "gpio-beeper"; |  | ||||||
| 		gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; |  | ||||||
| 	}; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| &spi { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	flash@0 { |  | ||||||
| 		compatible = "jedec,spi-nor"; |  | ||||||
| 		reg = <0>; |  | ||||||
| 		spi-max-frequency = <40000000>; |  | ||||||
|  |  | ||||||
| 		partitions { |  | ||||||
| 			compatible = "fixed-partitions"; |  | ||||||
| 			#address-cells = <1>; |  | ||||||
| 			#size-cells = <1>; |  | ||||||
|  |  | ||||||
| 			partition@0 { |  | ||||||
| 				label = "RouterBoot"; |  | ||||||
| 				reg = <0x0 0x20000>; |  | ||||||
| 				compatible = "mikrotik,routerboot-partitions"; |  | ||||||
| 				#address-cells = <1>; |  | ||||||
| 				#size-cells = <1>; |  | ||||||
|  |  | ||||||
| 				partition@0 { |  | ||||||
| 					label = "bootloader1"; |  | ||||||
| 					reg = <0x0 0x0>; |  | ||||||
| 					read-only; |  | ||||||
| 				}; |  | ||||||
|  |  | ||||||
| 				hard_config { |  | ||||||
| 					read-only; |  | ||||||
| 				}; |  | ||||||
|  |  | ||||||
| 				bios { |  | ||||||
| 					size = <0x1000>; |  | ||||||
| 					read-only; |  | ||||||
| 				}; |  | ||||||
|  |  | ||||||
| 				soft_config { |  | ||||||
| 				}; |  | ||||||
|  |  | ||||||
| 				partition@10000 { |  | ||||||
| 					label = "bootloader2"; |  | ||||||
| 					reg = <0x10000 0x10000>; |  | ||||||
| 					read-only; |  | ||||||
| 				}; |  | ||||||
| 			}; |  | ||||||
| 		}; |  | ||||||
| 	}; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| &nand { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	nand-ecc-mode = "soft"; |  | ||||||
| 	qca,nand-swap-dma; |  | ||||||
| 	qca,nand-scan-fixup; |  | ||||||
|  |  | ||||||
| 	partitions { |  | ||||||
| 		compatible = "fixed-partitions"; |  | ||||||
| 		#address-cells = <1>; |  | ||||||
| 		#size-cells = <1>; |  | ||||||
|  |  | ||||||
| 		partition@0 { |  | ||||||
| 			label = "booter"; |  | ||||||
| 			reg = <0x0000000 0x0040000>; |  | ||||||
| 			read-only; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		partition@40000 { |  | ||||||
| 			label = "kernel"; |  | ||||||
| 			reg = <0x0040000 0x03c0000>; |  | ||||||
| 		}; |  | ||||||
|  |  | ||||||
| 		partition@400000 { |  | ||||||
| 			label = "ubi"; |  | ||||||
| 			reg = <0x0400000 0x7c00000>; |  | ||||||
| 		}; |  | ||||||
| 	}; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| ð0 { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	phy-handle = <&swphy0>; |  | ||||||
|  |  | ||||||
| 	gmac-config { |  | ||||||
| 		device = <&gmac>; |  | ||||||
| 		switch-phy-swap = <1>; |  | ||||||
| 	}; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| ð1 { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	compatible = "syscon", "simple-mfd"; |  | ||||||
| }; |  | ||||||
|  |  | ||||||
| &wmac { |  | ||||||
| 	status = "okay"; |  | ||||||
|  |  | ||||||
| 	qca,no-eeprom; |  | ||||||
| }; |  | ||||||
| @@ -1,8 +1,114 @@ | |||||||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||||
|  |  | ||||||
| #include "ar9344_mikrotik_routerboard-sxt-5n.dtsi" | #include "ar9344_mikrotik_routerboard.dtsi" | ||||||
|  |  | ||||||
| / { | / { | ||||||
| 	compatible = "mikrotik,routerboard-sxt-5nd-r2", "qca,ar9344"; | 	compatible = "mikrotik,routerboard-sxt-5nd-r2", "qca,ar9344"; | ||||||
| 	model = "MikroTik RouterBOARD SXT 5nD r2 (SXT Lite5)"; | 	model = "MikroTik RouterBOARD SXT 5nD r2 (SXT Lite5)"; | ||||||
|  |  | ||||||
|  | 	gpio-export { | ||||||
|  | 		compatible = "gpio-export"; | ||||||
|  |  | ||||||
|  | 		gpio_nand_power { | ||||||
|  | 			gpio-export,name = "sxt5n:power:nand"; | ||||||
|  | 			gpio-export,output = <0>; | ||||||
|  | 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	beeper { | ||||||
|  | 		compatible = "gpio-beeper"; | ||||||
|  | 		gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &leds { | ||||||
|  | 	power { | ||||||
|  | 		label = "green:power"; | ||||||
|  | 		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; | ||||||
|  | 		default-state = "on"; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	led_user: user { | ||||||
|  | 		label = "green:user"; | ||||||
|  | 		gpios = <&gpio 3 GPIO_ACTIVE_LOW>; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &spi { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	flash@0 { | ||||||
|  | 		compatible = "jedec,spi-nor"; | ||||||
|  | 		reg = <0>; | ||||||
|  | 		spi-max-frequency = <40000000>; | ||||||
|  |  | ||||||
|  | 		partitions { | ||||||
|  | 			compatible = "fixed-partitions"; | ||||||
|  | 			#address-cells = <1>; | ||||||
|  | 			#size-cells = <1>; | ||||||
|  |  | ||||||
|  | 			partition@0 { | ||||||
|  | 				label = "RouterBoot"; | ||||||
|  | 				reg = <0x0 0x20000>; | ||||||
|  | 				compatible = "mikrotik,routerboot-partitions"; | ||||||
|  | 				#address-cells = <1>; | ||||||
|  | 				#size-cells = <1>; | ||||||
|  |  | ||||||
|  | 				partition@0 { | ||||||
|  | 					label = "bootloader1"; | ||||||
|  | 					reg = <0x0 0x0>; | ||||||
|  | 					read-only; | ||||||
|  | 				}; | ||||||
|  |  | ||||||
|  | 				hard_config { | ||||||
|  | 					read-only; | ||||||
|  | 				}; | ||||||
|  |  | ||||||
|  | 				bios { | ||||||
|  | 					size = <0x1000>; | ||||||
|  | 					read-only; | ||||||
|  | 				}; | ||||||
|  |  | ||||||
|  | 				soft_config { | ||||||
|  | 				}; | ||||||
|  |  | ||||||
|  | 				partition@10000 { | ||||||
|  | 					label = "bootloader2"; | ||||||
|  | 					reg = <0x10000 0x10000>; | ||||||
|  | 					read-only; | ||||||
|  | 				}; | ||||||
|  | 			}; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &nand { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	nand-ecc-mode = "soft"; | ||||||
|  | 	qca,nand-swap-dma; | ||||||
|  | 	qca,nand-scan-fixup; | ||||||
|  |  | ||||||
|  | 	partitions { | ||||||
|  | 		compatible = "fixed-partitions"; | ||||||
|  | 		#address-cells = <1>; | ||||||
|  | 		#size-cells = <1>; | ||||||
|  |  | ||||||
|  | 		partition@0 { | ||||||
|  | 			label = "booter"; | ||||||
|  | 			reg = <0x0000000 0x0040000>; | ||||||
|  | 			read-only; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		partition@40000 { | ||||||
|  | 			label = "kernel"; | ||||||
|  | 			reg = <0x0040000 0x03c0000>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		partition@400000 { | ||||||
|  | 			label = "ubi"; | ||||||
|  | 			reg = <0x0400000 0x7c00000>; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
| }; | }; | ||||||
|   | |||||||
							
								
								
									
										78
									
								
								target/linux/ath79/dts/ar9344_mikrotik_routerboard.dtsi
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										78
									
								
								target/linux/ath79/dts/ar9344_mikrotik_routerboard.dtsi
									
									
									
									
									
										Normal file
									
								
							| @@ -0,0 +1,78 @@ | |||||||
|  | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||||
|  |  | ||||||
|  | #include "ar9344.dtsi" | ||||||
|  |  | ||||||
|  | #include <dt-bindings/gpio/gpio.h> | ||||||
|  | #include <dt-bindings/input/input.h> | ||||||
|  |  | ||||||
|  | / { | ||||||
|  | 	aliases { | ||||||
|  | 		led-boot = &led_user; | ||||||
|  | 		led-failsafe = &led_user; | ||||||
|  | 		led-running = &led_user; | ||||||
|  | 		led-upgrade = &led_user; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	keys { | ||||||
|  | 		compatible = "gpio-keys"; | ||||||
|  |  | ||||||
|  | 		reset { | ||||||
|  | 			label = "reset"; | ||||||
|  | 			linux,code = <KEY_RESTART>; | ||||||
|  | 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>; | ||||||
|  | 			debounce-interval = <60>; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  |  | ||||||
|  | 	leds: leds { | ||||||
|  | 		compatible = "gpio-leds"; | ||||||
|  |  | ||||||
|  | 		rssilow { | ||||||
|  | 			label = "green:rssilow"; | ||||||
|  | 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		rssimediumlow { | ||||||
|  | 			label = "green:rssimediumlow"; | ||||||
|  | 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		rssimedium { | ||||||
|  | 			label = "green:rssimedium"; | ||||||
|  | 			gpios = <&gpio 4 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		rssimediumhigh { | ||||||
|  | 			label = "green:rssimediumhigh"; | ||||||
|  | 			gpios = <&gpio 21 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  |  | ||||||
|  | 		rssihigh { | ||||||
|  | 			label = "green:rssihigh"; | ||||||
|  | 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>; | ||||||
|  | 		}; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | ð0 { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	phy-handle = <&swphy0>; | ||||||
|  |  | ||||||
|  | 	gmac-config { | ||||||
|  | 		device = <&gmac>; | ||||||
|  | 		switch-phy-swap = <1>; | ||||||
|  | 	}; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | ð1 { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	compatible = "syscon", "simple-mfd"; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | &wmac { | ||||||
|  | 	status = "okay"; | ||||||
|  |  | ||||||
|  | 	qca,no-eeprom; | ||||||
|  | }; | ||||||
		Reference in New Issue
	
	Block a user