ramips: add support for JCG JHR-AC876M
JCG JHR-AC876M is an AC2600M router Hardware specs: SoC: MT7621AT 2.4GHz: MT7615N 4x4 @ PCIe0 5GHz: MT7615N 4x4 @ PCIe1 Flash: Winbond W25Q128JVSQ 16MiB RAM: Nanya NT5CB128M16 256MiB USB 2.0 and 3.0 ports 6 LEDs, 3 of which are connected to SoC GPIO Reset and WPS buttons Flash instructions: Stock to OpenWrt: Upload factory.bin in stock firmware's upgrade page, do not preserve settings OpenWrt to stock: Push and hold the reset button for 5s while power cycling to enter recovery mode; Visit 192.168.1.1 and upload stock firmware MAC addresses map: 0x0004 *:1c wlan2g/wan/label 0x8004 *:20 wlan5g 0xe000 *:1b lan 0xe006 *:1a not used in stock fw Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
This commit is contained in:
		
				
					committed by
					
						
						Adrian Schmutzler
					
				
			
			
				
	
			
			
			
						parent
						
							0bf4d681d4
						
					
				
				
					commit
					1b7199c90c
				
			
							
								
								
									
										144
									
								
								target/linux/ramips/dts/mt7621_jcg_jhr-ac876m.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										144
									
								
								target/linux/ramips/dts/mt7621_jcg_jhr-ac876m.dts
									
									
									
									
									
										Normal file
									
								
							@@ -0,0 +1,144 @@
 | 
			
		||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 | 
			
		||||
/dts-v1/;
 | 
			
		||||
 | 
			
		||||
#include "mt7621.dtsi"
 | 
			
		||||
 | 
			
		||||
#include <dt-bindings/gpio/gpio.h>
 | 
			
		||||
#include <dt-bindings/input/input.h>
 | 
			
		||||
 | 
			
		||||
/ {
 | 
			
		||||
	compatible = "jcg,jhr-ac876m", "mediatek,mt7621-soc";
 | 
			
		||||
	model = "JCG JHR-AC876M";
 | 
			
		||||
 | 
			
		||||
	aliases {
 | 
			
		||||
		led-boot = &led_wps;
 | 
			
		||||
		led-failsafe = &led_wps;
 | 
			
		||||
		led-running = &led_wps;
 | 
			
		||||
		led-upgrade = &led_wps;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	chosen {
 | 
			
		||||
		bootargs = "console=ttyS0,57600";
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	leds {
 | 
			
		||||
		compatible = "gpio-leds";
 | 
			
		||||
 | 
			
		||||
		usb3 {
 | 
			
		||||
			label = "jhr-ac876m:blue:usb3";
 | 
			
		||||
			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			trigger-sources = <&xhci_ehci_port1>;
 | 
			
		||||
			linux,default-trigger = "usbport";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		usb2 {
 | 
			
		||||
			label = "jhr-ac876m:blue:usb2";
 | 
			
		||||
			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			trigger-sources = <&ehci_port2>;
 | 
			
		||||
			linux,default-trigger = "usbport";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		led_wps: wps {
 | 
			
		||||
			label = "jhr-ac876m:blue:wps";
 | 
			
		||||
			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	keys {
 | 
			
		||||
		compatible = "gpio-keys";
 | 
			
		||||
 | 
			
		||||
		reset {
 | 
			
		||||
			label = "reset";
 | 
			
		||||
			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_RESTART>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps {
 | 
			
		||||
			label = "wps";
 | 
			
		||||
			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_WPS_BUTTON>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&spi0 {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
 | 
			
		||||
	flash@0 {
 | 
			
		||||
		compatible = "jedec,spi-nor";
 | 
			
		||||
		reg = <0>;
 | 
			
		||||
		spi-max-frequency = <80000000>;
 | 
			
		||||
		m25p,fast-read;
 | 
			
		||||
 | 
			
		||||
		partitions {
 | 
			
		||||
			compatible = "fixed-partitions";
 | 
			
		||||
			#address-cells = <1>;
 | 
			
		||||
			#size-cells = <1>;
 | 
			
		||||
 | 
			
		||||
			partition@0 {
 | 
			
		||||
				label = "u-boot";
 | 
			
		||||
				reg = <0x0 0x30000>;
 | 
			
		||||
				read-only;
 | 
			
		||||
			};
 | 
			
		||||
 | 
			
		||||
			partition@30000 {
 | 
			
		||||
				label = "u-boot-env";
 | 
			
		||||
				reg = <0x30000 0x10000>;
 | 
			
		||||
				read-only;
 | 
			
		||||
			};
 | 
			
		||||
 | 
			
		||||
			factory: partition@40000 {
 | 
			
		||||
				label = "factory";
 | 
			
		||||
				reg = <0x40000 0x10000>;
 | 
			
		||||
				read-only;
 | 
			
		||||
			};
 | 
			
		||||
 | 
			
		||||
			partition@50000 {
 | 
			
		||||
				compatible = "denx,uimage";
 | 
			
		||||
				label = "firmware";
 | 
			
		||||
				reg = <0x50000 0xfb0000>;
 | 
			
		||||
			};
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie0 {
 | 
			
		||||
	wifi@0,0 {
 | 
			
		||||
		compatible = "mediatek,mt76";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x0>;
 | 
			
		||||
		ieee80211-freq-limit = <2400000 2500000>;
 | 
			
		||||
 | 
			
		||||
		led {
 | 
			
		||||
			led-active-low;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie1 {
 | 
			
		||||
	wifi@0,0 {
 | 
			
		||||
		compatible = "mediatek,mt76";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x8000>;
 | 
			
		||||
		ieee80211-freq-limit = <5000000 6000000>;
 | 
			
		||||
 | 
			
		||||
		led {
 | 
			
		||||
			led-active-low;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
ðernet {
 | 
			
		||||
	mtd-mac-address = <&factory 0xe000>;
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&state_default {
 | 
			
		||||
	gpio {
 | 
			
		||||
		ralink,group = "i2c", "uart3", "jtag", "wdt";
 | 
			
		||||
		ralink,function = "gpio";
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
@@ -371,6 +371,19 @@ define Device/iptime_a6ns-m
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += iptime_a6ns-m
 | 
			
		||||
 | 
			
		||||
define Device/jcg_jhr-ac876m
 | 
			
		||||
  MTK_SOC := mt7621
 | 
			
		||||
  IMAGE_SIZE := 16064k
 | 
			
		||||
  IMAGES += factory.bin
 | 
			
		||||
  IMAGE/factory.bin := \
 | 
			
		||||
        $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | jcg-header 89.1
 | 
			
		||||
  JCG_MAXSIZE := 16064k
 | 
			
		||||
  DEVICE_VENDOR := JCG
 | 
			
		||||
  DEVICE_MODEL := JHR-AC876M
 | 
			
		||||
  DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += jcg_jhr-ac876m
 | 
			
		||||
 | 
			
		||||
define Device/lenovo_newifi-d1
 | 
			
		||||
  MTK_SOC := mt7621
 | 
			
		||||
  IMAGE_SIZE := 32448k
 | 
			
		||||
 
 | 
			
		||||
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
 | 
			
		||||
	d-team,pbr-m1|\
 | 
			
		||||
	firefly,firewrt|\
 | 
			
		||||
	hiwifi,hc5962|\
 | 
			
		||||
	jcg,jhr-ac876m|\
 | 
			
		||||
	mediatek,ap-mt7621a-v60|\
 | 
			
		||||
	mediatek,mt7621-eval-board|\
 | 
			
		||||
	mqmaker,witi|\
 | 
			
		||||
@@ -222,6 +223,10 @@ ramips_setup_macs()
 | 
			
		||||
	iptime,a6ns-m)
 | 
			
		||||
		wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
 | 
			
		||||
		;;
 | 
			
		||||
	jcg,jhr-ac876m)
 | 
			
		||||
		label_mac=$(mtd_get_mac_binary factory 0x4)
 | 
			
		||||
		wan_mac=$label_mac
 | 
			
		||||
		;;
 | 
			
		||||
	mediatek,ap-mt7621a-v60)
 | 
			
		||||
		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x5)" 1)
 | 
			
		||||
		;;
 | 
			
		||||
 
 | 
			
		||||
		Reference in New Issue
	
	Block a user