mvebu: initial support for Marvell Armada 3720 DB board

Add initial support for Marvell Armada cortex-a53 based
DB-88F3720-DDR3-Modular development board.

Specifications:
- Dual core ARMv8 Cortex-A53 CPU (up to 1.0 GHz)
- 4Gb 16-bit DDR3/3L DRAM memory
- 128Mb SPI NOR flash memory
- 8Gb eMMC NAND flash memory
- 1 x SATA Rev 3.0 port
- 1 x PCI Express (PCIe) Gen 2.0 or 1 x mini PCI Express (PCIe) Gen 2.0
- 1 x 1G Ethernet port via RGMII (RJ45)
- 1 x SD card port
- 1 x USB3 (USB2 backward) host\device port via type C connector
- 1 x USB2 host port via type A connector
- 1 x serial COM port driven by the 88F3720 UART interface and converted to
  USB via FTDI IC (option to connect the UART DB9 adapter)
- I2C Master Interface:
  - 1 x EEPROM @ address 0x57
  - 1 x I/O Expanders @ address 0x22
  - Sample at Reset (SatR) memory device @ address 0x4C
  - RTC clock generator PT7C4337AWE @ address 0x68
  - USB3 switch PI5USB30213XEA @ address 0x0D
  - ID component of PHY module @ address 0x24
- 1 x JTAG interface for CPU emulator
- 1 x SETM and JTAG debug interface
- 1 x power connector for HDD supply
- 1 x 12V DC jack power connector
- Board dimensions: 150 mm x 179 mm
- LED interface for system status

Booting from SD card:
 1. reset U-Boot environment:
      env default -a
      saveenv

 2. prepare U-Boot with boot script:
      setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
      saveenv

    or manually:
      setenv fdt_name armada-3720-db.dtb
      setenv image_name Image
      setenv bootcmd 'mmc dev 0; ext4load mmc 0:1 $kernel_addr $image_name;ext4load mmc 0:1 $fdt_addr $fdt_name;setenv bootargs $console root=/dev/mmcblk1p2 rw rootwait; booti $kernel_addr - $fdt_addr'
      saveenv

Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>

target/linux/mvebu/base-files/etc/board.d/02_network

@@ -46,6 +46,9 @@ armada-xp-gp)
 globalscale,espressobin)
 	ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
 	;;
+marvell,armada-3720-db)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
 marvell,armada8040-mcbin)
 	ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
 	;;

target/linux/mvebu/base-files/lib/mvebu.sh

@@ -20,6 +20,9 @@ mvebu_board_detect() {
 	*"Globalscale Marvell ESPRESSOBin Board")
 		name="globalscale,espressobin"
 		;;
+	*"Marvell Armada 3720 Development Board DB-88F3720-DDR3")
+		name="marvell,armada-3720-db"
+		;;
 	*"Marvell 8040 MACHIATOBin")
 		name="marvell,armada8040-mcbin"
 		;;

target/linux/mvebu/image/armada-3720-db.bootscript

@@ -0,0 +1,10 @@
+setenv bootargs "root=PARTUUID=@ROOT@-02 rw rootwait"
+
+if test -n "${console}"; then
+	setenv bootargs "${bootargs} ${console}"
+fi
+
+load mmc 0:1 ${fdt_addr} armada-3720-db.dtb
+load mmc 0:1 ${kernel_addr} Image
+
+booti ${kernel_addr} - ${fdt_addr}

target/linux/mvebu/image/cortex-a53.mk

@@ -13,4 +13,17 @@ define Device/globalscale-espressobin
 endef
 TARGET_DEVICES += globalscale-espressobin
 
+define Device/armada-3720-db
+  KERNEL_NAME := Image
+  KERNEL := kernel-bin
+  DEVICE_TITLE := Marvell Armada 3720 Development Board DB-88F3720-DDR3
+  DEVICE_PACKAGES := e2fsprogs ethtool mkf2fs kmod-fs-vfat kmod-usb2 kmod-usb3 kmod-usb-storage
+  IMAGES := sdcard.img.gz
+  IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+  DEVICE_DTS := armada-3720-db
+  DTS_DIR := $(DTS_DIR)/marvell
+  SUPPORTED_DEVICES := marvell,armada-3720-db
+endef
+TARGET_DEVICES += armada-3720-db
+
 endif