ramips: add support for D-Link DAP-X1860 A1
The DAP-X1860 is a wall-plug AX1800 repeater. Specifications: - MT7621, 256 MiB RAM, 128 MiB SPI NAND - MT7915 + MT7975 2x2 802.11ax (DBDC) - Ethernet: 1 port 10/100/1000 - LED RSSI bargraph (2x green, 1x red/orange), status and RSSI LEDs are incorrectly populated red/orange (should be red/green according to documentation) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tar -xvf DAP-X1860_RevA_Firmware_101b94.bin - openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \ -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 - flash kernel_DAP-X1860.bin via Recovery Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
11759a5bf3
commit
3c31f6b521
197
target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
Normal file
197
target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
Normal file
@@ -0,0 +1,197 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dap-x1860-a1", "mediatek,mt7621-soc";
|
||||
model = "D-Link DAP-X1860 A1";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_power_orange;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_orange;
|
||||
led-upgrade = &led_power_red;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "orange:power";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
rssihigh {
|
||||
label = "green:rssihigh";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssimedium {
|
||||
label = "green:rssimedium";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssilow_orange {
|
||||
label = "orange:rssilow";
|
||||
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssilow_green {
|
||||
label = "green:rssilow";
|
||||
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
|
||||
devices = <&fwconcat0 &fwconcat1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x0 0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
mediatek,nmbm;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bootloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "config";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "kernel";
|
||||
reg = <0x180000 0x0800000>;
|
||||
};
|
||||
|
||||
fwconcat0: partition@980000 {
|
||||
label = "fwconcat0";
|
||||
reg = <0x980000 0x2c00000>;
|
||||
};
|
||||
|
||||
partition@3580000 {
|
||||
label = "manufacture";
|
||||
reg = <0x3580000 0x400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3980000 {
|
||||
label = "storage";
|
||||
reg = <0x3980000 0x680000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fwconcat1: partition@4000000 {
|
||||
label = "fwconcat1";
|
||||
reg = <0x4000000 0x3800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
mediatek,disable-radar-background;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "uart2";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
@@ -478,6 +478,27 @@ define Device/cudy_x6
|
||||
endef
|
||||
TARGET_DEVICES += cudy_x6
|
||||
|
||||
define Device/dlink_dap-x1860-a1
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 53248k
|
||||
DEVICE_VENDOR := D-Link
|
||||
DEVICE_MODEL := DAP-X1860
|
||||
DEVICE_VARIANT := A1
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 8192k
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
||||
check-size | elx-header 011b0060 8844A2D168B45A2D
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware rssileds
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dap-x1860-a1
|
||||
|
||||
define Device/dlink_dir-8xx-a1
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 16000k
|
||||
|
||||
@@ -56,6 +56,13 @@ jcg,y2|\
|
||||
xzwifi,creativebox-v1)
|
||||
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
|
||||
;;
|
||||
dlink,dap-x1860-a1)
|
||||
ucidef_set_rssimon "wlan1" "200000" "1"
|
||||
ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25"
|
||||
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "26" "100"
|
||||
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100"
|
||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100"
|
||||
;;
|
||||
dlink,dir-1960-a1|\
|
||||
dlink,dir-2640-a1|\
|
||||
dlink,dir-2660-a1)
|
||||
|
||||
@@ -11,6 +11,7 @@ ramips_setup_interfaces()
|
||||
ampedwireless,ally-00x19k|\
|
||||
asus,rp-ac56|\
|
||||
asus,rp-ac87|\
|
||||
dlink,dap-x1860-a1|\
|
||||
edimax,re23s|\
|
||||
mikrotik,ltap-2hnd|\
|
||||
mikrotik,routerboard-m11g|\
|
||||
|
||||
@@ -22,6 +22,13 @@ case "$board" in
|
||||
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
|
||||
macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
dlink,dap-x1860-a1)
|
||||
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
|
||||
[ "$PHYNBR" = "0" ] && \
|
||||
macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && \
|
||||
macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
dlink,dir-853-a3)
|
||||
[ "$PHYNBR" = "0" ] && \
|
||||
macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
|
||||
|
||||
@@ -59,6 +59,7 @@ platform_do_upgrade() {
|
||||
beeline,smartbox-giga|\
|
||||
beeline,smartbox-turbo|\
|
||||
belkin,rt1800|\
|
||||
dlink,dap-x1860-a1|\
|
||||
dlink,dir-1960-a1|\
|
||||
dlink,dir-2640-a1|\
|
||||
dlink,dir-2660-a1|\
|
||||
|
||||
Reference in New Issue
Block a user