ramips: mt7621: add support for Netgear R6800
This patch adds support for the Netgear R6800, aka Netgear AC1900 and R6800-100PES. Specification: - SoC: MediaTek MT7621AT (880 MHz) - Flash: 128 MiB NAND - RAM: 256 MiB - Wireless: MediaTek MT7615EN b/g/n , MediaTek MT7615EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - USB 2.0 - USB 3.0 - Serial baud rate of Bootloader and factory firmware: 57600 Known issues: - Device has 3 wifi LEDs: Wifi 5Ghz, Wifi 2.4Ghz and Wifi on/off. Wifi on/off is not used. Installation: - apply factory image via stock web-gui. Back to stock: - nmrpflash can be used to recover to the stock Netgear firmware. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Pawel Dembicki
committed by
David Bauer
David Bauer
parent
3251ac8f2d
commit
4e9317201d
124
target/linux/ramips/dts/mt7621_netgear_r6800.dts
Normal file
124
target/linux/ramips/dts/mt7621_netgear_r6800.dts
Normal file
@@ -0,0 +1,124 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621_netgear_sercomm_bzv.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "netgear,r6800", "mediatek,mt7621-soc";
|
||||
model = "Netgear R6800";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_white;
|
||||
led-failsafe = &led_power_orange;
|
||||
led-running = &led_power_white;
|
||||
led-upgrade = &led_power_orange;
|
||||
label-mac-device = ðernet;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_orange: power_orange {
|
||||
gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:orange:power";
|
||||
};
|
||||
|
||||
led_power_white: power_white {
|
||||
gpios = <&gpio_expander 1 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:power";
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
gpios = <&gpio_expander 2 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:orange:wan";
|
||||
};
|
||||
|
||||
wan_white {
|
||||
gpios = <&gpio_expander 3 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:wan";
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
gpios = <&gpio_expander 4 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:wlan2g";
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:wlan5g";
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:usb2";
|
||||
linux,default-trigger = "usbport";
|
||||
trigger-sources = <&ehci_port2>;
|
||||
};
|
||||
|
||||
usb3 {
|
||||
gpios = <&gpio_expander 7 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:usb3";
|
||||
linux,default-trigger = "usbport";
|
||||
trigger-sources = <&xhci_ehci_port1>;
|
||||
};
|
||||
|
||||
lan1_orange {
|
||||
gpios = <&gpio_expander 8 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:orange:lan1";
|
||||
};
|
||||
|
||||
lan1_white {
|
||||
gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:lan1";
|
||||
};
|
||||
|
||||
lan2_orange {
|
||||
gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:orange:lan2";
|
||||
};
|
||||
|
||||
lan2_white {
|
||||
gpios = <&gpio_expander 11 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:lan2";
|
||||
};
|
||||
|
||||
lan3_orange {
|
||||
gpios = <&gpio_expander 12 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:orange:lan3";
|
||||
};
|
||||
|
||||
lan3_white {
|
||||
gpios = <&gpio_expander 13 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:lan3";
|
||||
};
|
||||
|
||||
lan4_orange {
|
||||
gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:orange:lan4";
|
||||
};
|
||||
|
||||
lan4_white {
|
||||
gpios = <&gpio_expander 15 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:lan4";
|
||||
};
|
||||
|
||||
wps {
|
||||
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
||||
label = "r6800:white:wps";
|
||||
};
|
||||
|
||||
wlan {
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
label = "r6800:white:wlan";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
ralink,group = "uart3", "uart2", "jtag", "wdt";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
125
target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
Normal file
125
target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
Normal file
@@ -0,0 +1,125 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "mediatek,mt7621-soc";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
|
||||
gpio_expander: i2c0gpio-expander@20{
|
||||
#gpio-cells = <2>;
|
||||
#interrupt-cells = <2>;
|
||||
compatible = "semtech,sx1503q";
|
||||
reg = <0x20>;
|
||||
|
||||
gpio-controller;
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "SC PART_MAP";
|
||||
reg = <0x100000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x400000>;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "ubi";
|
||||
reg = <0x600000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@2e00000 {
|
||||
label = "reserved0";
|
||||
reg = <0x2e00000 0x1800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@4600000 {
|
||||
label = "factory";
|
||||
reg = <0x4600000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4800000 {
|
||||
label = "reserved1";
|
||||
reg = <0x4800000 0x3800000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -595,6 +595,18 @@ define Device/netgear_r6350
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r6350
|
||||
|
||||
define Device/netgear_r6800
|
||||
$(Device/netgear_sercomm_nand)
|
||||
DEVICE_MODEL := R6800
|
||||
SERCOMM_HWNAME := R6950
|
||||
SERCOMM_HWID := BZV
|
||||
SERCOMM_HWVER := A001
|
||||
SERCOMM_SWVER := 0x0062
|
||||
IMAGE_SIZE := 40960k
|
||||
DEVICE_PACKAGES += kmod-mt7615e
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r6800
|
||||
|
||||
define Device/netgear_r6850
|
||||
$(Device/netgear_sercomm_nand)
|
||||
DEVICE_MODEL := R6850
|
||||
|
||||
@@ -52,6 +52,13 @@ netgear,r6850|\
|
||||
netgear,wndr3700-v5)
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
||||
;;
|
||||
netgear,r6800)
|
||||
ucidef_set_led_switch "wan" "WAN" "$boardname:white:wan" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "$boardname:white:lan1" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "$boardname:white:lan2" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "$boardname:white:lan3" "switch0" "0x02"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "$boardname:white:lan4" "switch0" "0x01"
|
||||
;;
|
||||
tplink,re350-v1|\
|
||||
tplink,re650-v1)
|
||||
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
|
||||
|
||||
@@ -41,6 +41,7 @@ ramips_setup_interfaces()
|
||||
netgear,r6220|\
|
||||
netgear,r6260|\
|
||||
netgear,r6350|\
|
||||
netgear,r6800|\
|
||||
netgear,r6850|\
|
||||
netgear,wndr3700-v5|\
|
||||
netis,wf2881|\
|
||||
@@ -252,6 +253,7 @@ ramips_setup_macs()
|
||||
;;
|
||||
netgear,r6260|\
|
||||
netgear,r6350|\
|
||||
netgear,r6800|\
|
||||
netgear,r6850)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 2)
|
||||
;;
|
||||
|
||||
@@ -48,6 +48,7 @@ platform_do_upgrade() {
|
||||
netgear,r6220|\
|
||||
netgear,r6260|\
|
||||
netgear,r6350|\
|
||||
netgear,r6800|\
|
||||
netgear,r6850|\
|
||||
netis,wf2881|\
|
||||
xiaomi,mir3g|\
|
||||
|
||||
@@ -236,6 +236,7 @@ CONFIG_PHYLIB=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_RT2880=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
CONFIG_PINCTRL_SX150X=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
|
||||
Reference in New Issue
Block a user