packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

package/kernel/linux/modules/block.mk

@@ -0,0 +1,606 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+BLOCK_MENU:=Block Devices
+
+define KernelPackage/aoe
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=ATA over Ethernet support
+  KCONFIG:=CONFIG_ATA_OVER_ETH
+  FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
+  AUTOLOAD:=$(call AutoLoad,30,aoe)
+endef
+
+define KernelPackage/aoe/description
+  Kernel support for ATA over Ethernet
+endef
+
+$(eval $(call KernelPackage,aoe))
+
+
+define KernelPackage/ata-core
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Serial and Parallel ATA support
+  DEPENDS:=@PCI_SUPPORT +kmod-scsi-core
+  KCONFIG:=CONFIG_ATA
+  FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
+  AUTOLOAD:=$(call AutoLoad,21,libata,1)
+endef
+
+$(eval $(call KernelPackage,ata-core))
+
+
+define AddDepends/ata
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS+=kmod-ata-core $(1)
+endef
+
+
+define KernelPackage/ata-ahci
+  TITLE:=AHCI Serial ATA support
+  KCONFIG:=CONFIG_SATA_AHCI
+  FILES:= \
+    $(LINUX_DIR)/drivers/ata/ahci.ko \
+    $(LINUX_DIR)/drivers/ata/libahci.ko
+  AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-ahci/description
+ Support for AHCI Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-ahci))
+
+
+define KernelPackage/ata-artop
+  TITLE:=ARTOP 6210/6260 PATA support
+  KCONFIG:=CONFIG_PATA_ARTOP
+  FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
+  AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-artop/description
+ PATA support for ARTOP 6210/6260 host controllers.
+endef
+
+$(eval $(call KernelPackage,ata-artop))
+
+
+define KernelPackage/ata-marvell-sata
+  TITLE:=Marvell Serial ATA support
+  KCONFIG:=CONFIG_SATA_MV
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-marvell-sata/description
+ SATA support for marvell chipsets
+endef
+
+$(eval $(call KernelPackage,ata-marvell-sata))
+
+
+define KernelPackage/ata-nvidia-sata
+  TITLE:=Nvidia Serial ATA support
+  KCONFIG:=CONFIG_SATA_NV
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
+  $(call AddDepends/ata)
+endef
+
+$(eval $(call KernelPackage,ata-nvidia-sata))
+
+
+define KernelPackage/ata-pdc202xx-old
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Older Promise PATA controller support
+  DEPENDS:=kmod-ata-core
+  KCONFIG:= \
+       CONFIG_ATA_SFF=y \
+       CONFIG_PATA_PDC_OLD
+  FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
+  AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
+endef
+
+define KernelPackage/ata-pdc202xx-old/description
+ This option enables support for the Promise 20246, 20262, 20263,
+ 20265 and 20267 adapters.
+endef
+
+$(eval $(call KernelPackage,ata-pdc202xx-old))
+
+
+define KernelPackage/ata-piix
+  TITLE:=Intel PIIX PATA/SATA support
+  KCONFIG:=CONFIG_ATA_PIIX
+  FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
+  AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-piix/description
+ SATA support for Intel ICH5/6/7/8 series host controllers and
+ PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
+endef
+
+$(eval $(call KernelPackage,ata-piix))
+
+
+define KernelPackage/ata-sil
+  TITLE:=Silicon Image SATA support
+  KCONFIG:=CONFIG_SATA_SIL
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sil/description
+ Support for Silicon Image Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-sil))
+
+
+define KernelPackage/ata-sil24
+  TITLE:=Silicon Image 3124/3132 SATA support
+  KCONFIG:=CONFIG_SATA_SIL24
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sil24/description
+ Support for Silicon Image 3124/3132 Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-sil24))
+
+
+define KernelPackage/ata-sis
+  TITLE:=SIS SATA support
+  KCONFIG:=CONFIG_SATA_SIS
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_sis.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_sis,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-sis/description
+ Support for SIS Serial ATA controllers.
+endef
+
+$(eval $(call KernelPackage,ata-sis))
+
+
+define KernelPackage/ata-via-sata
+  TITLE:=VIA SATA support
+  KCONFIG:=CONFIG_SATA_VIA
+  FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
+  AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
+  $(call AddDepends/ata)
+endef
+
+define KernelPackage/ata-via-sata/description
+ This option enables support for VIA Serial ATA.
+endef
+
+$(eval $(call KernelPackage,ata-via-sata))
+
+
+define KernelPackage/block2mtd
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Block device MTD emulation
+  KCONFIG:=CONFIG_MTD_BLOCK2MTD
+  FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
+endef
+
+$(eval $(call KernelPackage,block2mtd))
+
+
+define KernelPackage/dm
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Device Mapper
+  # All the "=n" are unnecessary, they're only there
+  # to stop the config from asking the question.
+  # MIRROR is M because I've needed it for pvmove.
+  KCONFIG:= \
+	CONFIG_BLK_DEV_MD=n \
+	CONFIG_DM_DEBUG=n \
+	CONFIG_DM_UEVENT=n \
+	CONFIG_DM_DELAY=n \
+	CONFIG_DM_MULTIPATH=n \
+	CONFIG_DM_ZERO=n \
+	CONFIG_DM_SNAPSHOT=n \
+	CONFIG_DM_LOG_USERSPACE=n \
+	CONFIG_MD=y \
+	CONFIG_BLK_DEV_DM \
+	CONFIG_DM_CRYPT \
+	CONFIG_DM_MIRROR
+  FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
+  AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
+endef
+
+define KernelPackage/dm/description
+ Kernel module necessary for LVM2 support
+endef
+
+$(eval $(call KernelPackage,dm))
+
+
+define KernelPackage/md-mod
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=MD RAID
+  KCONFIG:= \
+       CONFIG_MD=y \
+       CONFIG_BLK_DEV_MD=m \
+       CONFIG_MD_AUTODETECT=y \
+       CONFIG_MD_FAULTY=n
+  FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
+  AUTOLOAD:=$(call AutoLoad,27,md-mod)
+endef
+
+define KernelPackage/md-mod/description
+ Kernel RAID md module (md-mod.ko).
+ You will need to select at least one RAID level module below.
+endef
+
+$(eval $(call KernelPackage,md-mod))
+
+
+define KernelPackage/md/Depends
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS:=kmod-md-mod $(1)
+endef
+
+
+define KernelPackage/md-linear
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID Linear Module
+  KCONFIG:=CONFIG_MD_LINEAR
+  FILES:=$(LINUX_DIR)/drivers/md/linear.ko
+  AUTOLOAD:=$(call AutoLoad,28,linear)
+endef
+
+define KernelPackage/md-linear/description
+ RAID "Linear" or "Append" driver module (linear.ko)
+endef
+
+$(eval $(call KernelPackage,md-linear))
+
+
+define KernelPackage/md-raid0
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID0 Module
+  KCONFIG:=CONFIG_MD_RAID0
+  FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
+  AUTOLOAD:=$(call AutoLoad,28,raid0)
+endef
+
+define KernelPackage/md-raid0/description
+ RAID Level 0 (Striping) driver module (raid0.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid0))
+
+
+define KernelPackage/md-raid1
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID1 Module
+  KCONFIG:=CONFIG_MD_RAID1
+  FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
+  AUTOLOAD:=$(call AutoLoad,28,raid1)
+endef
+
+define KernelPackage/md-raid1/description
+ RAID Level 1 (Mirroring) driver (raid1.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid1))
+
+
+define KernelPackage/md-raid10
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID10 Module
+  KCONFIG:=CONFIG_MD_RAID10
+  FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
+  AUTOLOAD:=$(call AutoLoad,28,raid10)
+endef
+
+define KernelPackage/md-raid10/description
+ RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
+endef
+
+$(eval $(call KernelPackage,md-raid10))
+
+
+define KernelPackage/md-raid456
+$(call KernelPackage/md/Depends,)
+  TITLE:=RAID Level 456 Driver
+  KCONFIG:= \
+       CONFIG_XOR_BLOCKS \
+       CONFIG_ASYNC_CORE \
+       CONFIG_ASYNC_MEMCPY \
+       CONFIG_ASYNC_XOR \
+       CONFIG_ASYNC_PQ \
+       CONFIG_ASYNC_RAID6_RECOV \
+       CONFIG_ASYNC_RAID6_TEST=n \
+       CONFIG_MD_RAID6_PQ \
+       CONFIG_MD_RAID456 \
+       CONFIG_MULTICORE_RAID456=n
+  FILES:= \
+	$(LINUX_DIR)/crypto/xor.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_tx.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_xor.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_pq.ko \
+	$(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
+	$(LINUX_DIR)/drivers/md/raid456.ko \
+	$(LINUX_DIR)/lib/raid6/raid6_pq.ko
+  AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
+endef
+
+define KernelPackage/md-raid456/description
+ RAID Level 4,5,6 kernel module (raid456.ko)
+
+ Includes the following modules required by
+ raid456.ko:
+    xor.ko
+    async_tx.ko
+    async_xor.ko
+    async_memcpy.ko
+    async_pq.ko
+    async_raid5_recov.ko
+    raid6_pq.ko
+endef
+
+$(eval $(call KernelPackage,md-raid456))
+
+
+define KernelPackage/md-multipath
+$(call KernelPackage/md/Depends,)
+  TITLE:=MD Multipath Module
+  KCONFIG:=CONFIG_MD_MULTIPATH
+  FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
+  AUTOLOAD:=$(call AutoLoad,29,multipath)
+endef
+
+define KernelPackage/md-multipath/description
+ Multipath driver module (multipath.ko)
+endef
+
+$(eval $(call KernelPackage,md-multipath))
+
+
+define KernelPackage/ide-core
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=IDE (ATA/ATAPI) device support
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:= \
+	CONFIG_IDE \
+	CONFIG_BLK_DEV_IDE \
+	CONFIG_BLK_DEV_IDEDISK \
+	CONFIG_IDE_GD \
+	CONFIG_IDE_GD_ATA=y \
+	CONFIG_IDE_GD_ATAPI=n \
+	CONFIG_IDEPCI_PCIBUS_ORDER=y \
+	CONFIG_BLK_DEV_IDEDMA_PCI=y \
+	CONFIG_BLK_DEV_IDEPCI=y
+  FILES:= \
+	$(LINUX_DIR)/drivers/ide/ide-core.ko \
+	$(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
+  AUTOLOAD:= \
+	$(call AutoLoad,20,ide-core,1) \
+	$(call AutoLoad,40,ide-gd_mod,1)
+endef
+
+define KernelPackage/ide-core/description
+ Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
+ Includes:
+ - ide-core
+ - ide-gd_mod
+endef
+
+$(eval $(call KernelPackage,ide-core))
+
+
+define AddDepends/ide
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS+=kmod-ide-core $(1)
+endef
+
+
+define KernelPackage/ide-generic
+  SUBMENU:=$(BLOCK_MENU)
+  DEPENDS:=@PCI_SUPPORT
+  TITLE:=Kernel support for generic PCI IDE chipsets
+  KCONFIG:=CONFIG_BLK_DEV_GENERIC
+  FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
+  AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
+  $(call AddDepends/ide)
+endef
+
+$(eval $(call KernelPackage,ide-generic))
+
+
+define KernelPackage/ide-generic-old
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for generic (legacy) IDE chipsets
+  KCONFIG:=CONFIG_IDE_GENERIC
+  FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
+  AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
+  $(call AddDepends/ide)
+endef
+
+$(eval $(call KernelPackage,ide-generic-old))
+
+
+define KernelPackage/ide-aec62xx
+  TITLE:=Acard AEC62xx IDE driver
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:=CONFIG_BLK_DEV_AEC62XX
+  FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
+  AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
+  $(call AddDepends/ide)
+endef
+
+define KernelPackage/ide-aec62xx/description
+ Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
+endef
+
+$(eval $(call KernelPackage,ide-aec62xx,1))
+
+
+define KernelPackage/ide-pdc202xx
+  TITLE:=Promise PDC202xx IDE driver
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
+  FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
+  AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
+  $(call AddDepends/ide)
+endef
+
+define KernelPackage/ide-pdc202xx/description
+ Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
+ controllers.
+endef
+
+$(eval $(call KernelPackage,ide-pdc202xx))
+
+
+define KernelPackage/ide-it821x
+  TITLE:=ITE IT821x IDE driver
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:=CONFIG_BLK_DEV_IT821X
+  FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
+  AUTOLOAD:=$(call AutoLoad,30,it821x,1)
+  $(call AddDepends/ide)
+endef
+
+define KernelPackage/ide-it821x/description
+  Kernel module for the ITE IDE821x IDE controllers.
+endef
+
+$(eval $(call KernelPackage,ide-it821x))
+
+
+define KernelPackage/libsas
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=SAS Domain Transport Attributes
+  KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
+	CONFIG_SCSI_SAS_ATTRS \
+	CONFIG_SCSI_SAS_ATA=y \
+	CONFIG_SCSI_SAS_HOST_SMP=y \
+	CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+  FILES:= \
+	$(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
+	$(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
+  AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
+endef
+
+define KernelPackage/libsas/description
+  SAS Domain Transport Attributes support.
+endef
+
+$(eval $(call KernelPackage,libsas,1))
+
+
+define KernelPackage/loop
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Loopback device support
+  KCONFIG:= \
+	CONFIG_BLK_DEV_LOOP \
+	CONFIG_BLK_DEV_CRYPTOLOOP=n
+  FILES:=$(LINUX_DIR)/drivers/block/loop.ko
+  AUTOLOAD:=$(call AutoLoad,30,loop)
+endef
+
+define KernelPackage/loop/description
+ Kernel module for loopback device support
+endef
+
+$(eval $(call KernelPackage,loop))
+
+
+define KernelPackage/mvsas
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Marvell 88SE6440 SAS/SATA driver
+  DEPENDS:=@TARGET_x86 +kmod-libsas
+  KCONFIG:= \
+	CONFIG_SCSI_MVSAS \
+	CONFIG_SCSI_MVSAS_TASKLET=n
+  FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
+  AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
+endef
+
+define KernelPackage/mvsas/description
+  Kernel support for the Marvell SAS SCSI adapters
+endef
+
+$(eval $(call KernelPackage,mvsas))
+
+
+define KernelPackage/nbd
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Network block device support
+  KCONFIG:=CONFIG_BLK_DEV_NBD
+  FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
+  AUTOLOAD:=$(call AutoLoad,30,nbd)
+endef
+
+define KernelPackage/nbd/description
+ Kernel module for network block device support
+endef
+
+$(eval $(call KernelPackage,nbd))
+
+
+define KernelPackage/scsi-core
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=SCSI device support
+  KCONFIG:= \
+	CONFIG_SCSI \
+	CONFIG_BLK_DEV_SD
+  FILES:= \
+	$(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
+	$(LINUX_DIR)/drivers/scsi/sd_mod.ko
+  AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
+endef
+
+$(eval $(call KernelPackage,scsi-core))
+
+
+define KernelPackage/scsi-generic
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for SCSI generic
+  DEPENDS:=+kmod-scsi-core
+  KCONFIG:= \
+	CONFIG_CHR_DEV_SG
+  FILES:= \
+	$(LINUX_DIR)/drivers/scsi/sg.ko
+  AUTOLOAD:=$(call AutoLoad,65,sg)
+endef
+
+$(eval $(call KernelPackage,scsi-generic))
+
+
+define KernelPackage/scsi-cdrom
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=Kernel support for CD / DVD drives
+  DEPENDS:=+kmod-scsi-core
+  KCONFIG:= \
+    CONFIG_BLK_DEV_SR \
+    CONFIG_BLK_DEV_SR_VENDOR=n
+  FILES:= \
+    $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
+    $(LINUX_DIR)/drivers/scsi/sr_mod.ko
+  AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
+endef
+
+$(eval $(call KernelPackage,scsi-cdrom))
+