ath79: add support for Netgear R6100
Netgear R6100 is a dual-band Wi-Fi 5 (AC1200) router based on Qualcomm
Atheros (AR9344 + QCA9882) platform. Support for this device was first
introduced in 15f6f67d18 (ar71xx). FCC ID: PY312400225.
Specifications:
- Atheros AR9344 (560 MHz)
- 128 MB of RAM (DDR2)
- 128 MB of flash (parallel NAND)
- 2T2R 2.4 GHz Wi-Fi (AR9344)
- 2T2R 5 GHz Wi-Fi (QCA9882)
- 5x 10/100 Mbps Ethernet (AR9344)
- 4x internal antenna
- 1x USB 2.0 (GPIO-controlled power)
- 6x LED, 3x button (reset, Wi-Fi, WPS)
- UART (4-pin, 2.54 mm pitch) header on PCB
- 1x mechanical power switch
- DC jack for main power input (12 V)
WARNING: sysupgrade from older stable releases is not possible, fresh
installation (via vendor's GUI or TFTP based recovery) is required.
Reason for that is increased kernel partition size.
Installation:
Use the 'factory' image under vendor's GUI or via TFTP U-Boot recovery.
You can use the 'nmrpflash' tool at a boot time, before kernel is loaded
or start it manually by pressing the 'reset' button for ~20 seconds from
powering up the device (U-Boot will start TFTP server on 192.168.1.1,
use TFTP client to send the image).
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
231
target/linux/ath79/dts/ar9344_netgear_r6100.dts
Normal file
231
target/linux/ath79/dts/ar9344_netgear_r6100.dts
Normal file
@@ -0,0 +1,231 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9344.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear R6100";
|
||||
compatible = "netgear,r6100", "qca,ar9344";
|
||||
|
||||
aliases {
|
||||
label-mac-device = ð0;
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_amber;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
usb-power {
|
||||
gpio-export,name = "usb-power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_amber: power_amber {
|
||||
label = "amber:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "blue:usb";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&hub_port>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_green {
|
||||
label = "green:wan";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
label = "blue:wlan";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy0>;
|
||||
|
||||
nvmem-cells = <&macaddr_caldata_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
switch-phy-swap = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_caldata_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
caldata: partition@20000 {
|
||||
label = "caldata";
|
||||
reg = <0x0020000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "caldata-backup";
|
||||
reg = <0x0060000 0x0040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "config";
|
||||
reg = <0x00a0000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
label = "pot";
|
||||
reg = <0x0120000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1a0000 {
|
||||
label = "kernel";
|
||||
reg = <0x01a0000 0x0400000>;
|
||||
};
|
||||
|
||||
partition@5a0000 {
|
||||
label = "ubi";
|
||||
reg = <0x05a0000 0x7560000>;
|
||||
};
|
||||
|
||||
partition@7b00000 {
|
||||
label = "language";
|
||||
reg = <0x7b00000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7d00000 {
|
||||
label = "traffic_meter";
|
||||
reg = <0x7d00000 0x0300000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_caldata_c>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&ref {
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub_port: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&caldata 0x1000>;
|
||||
};
|
||||
|
||||
&caldata {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_caldata_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_caldata_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
macaddr_caldata_c: macaddr@c {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
};
|
||||
@@ -215,6 +215,17 @@ define Device/netgear_ath79_nand
|
||||
UBINIZE_OPTS := -E 5
|
||||
endef
|
||||
|
||||
define Device/netgear_r6100
|
||||
SOC := ar9344
|
||||
DEVICE_MODEL := R6100
|
||||
UIMAGE_MAGIC := 0x36303030
|
||||
NETGEAR_BOARD_ID := R6100
|
||||
NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
|
||||
$(Device/netgear_ath79_nand)
|
||||
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r6100
|
||||
|
||||
define Device/netgear_wndr3700-v4
|
||||
SOC := ar9344
|
||||
DEVICE_MODEL := WNDR3700
|
||||
|
||||
@@ -14,6 +14,9 @@ glinet,gl-ar300m-nand|\
|
||||
glinet,gl-ar300m-nor)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
|
||||
;;
|
||||
netgear,r6100)
|
||||
ucidef_set_led_netdev "wan-green" "WAN (green)" "green:wan" "eth1"
|
||||
;;
|
||||
netgear,wndr3700-v4|\
|
||||
netgear,wndr4300|\
|
||||
netgear,wndr4300sw|\
|
||||
|
||||
@@ -25,6 +25,11 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
|
||||
;;
|
||||
netgear,r6100)
|
||||
ucidef_set_interface_wan "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
|
||||
;;
|
||||
netgear,wndr3700-v4|\
|
||||
netgear,wndr4300|\
|
||||
netgear,wndr4300sw|\
|
||||
|
||||
@@ -23,6 +23,9 @@ case "$FIRMWARE" in
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
|
||||
;;
|
||||
netgear,r6100)
|
||||
caldata_extract "caldata" 0x5000 0x844
|
||||
;;
|
||||
zyxel,nbg6716)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
|
||||
|
||||
Reference in New Issue
Block a user