domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

kernel: update 3.10 to 3.10.34

Browse Source 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
This commit is contained in:
Gabor Juhos
2014-03-27 09:28:33 +00:00
parent b68564ed3f
commit 627baa28d3
46 changed files with 77 additions and 298 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/brcm63xx/Makefile
View File

@@ -11,7 +11,7 @@ BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM63xx
SUBTARGETS:=generic smp
FEATURES:=squashfs usb atm pci pcmcia usbgadget
LINUX_VERSION:=3.10.32
LINUX_VERSION:=3.10.34
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk

2
target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
View File

@@ -31,7 +31,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
static struct clk clk_usbd = {
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -386,7 +386,6 @@ static inline void set_clocks(struct bcm
@@ -392,7 +392,6 @@ static inline void set_clocks(struct bcm
if (is_enabled) {
clk_enable(udc->usbh_clk);
clk_enable(udc->usbd_clk);

4
target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
View File

@@ -108,7 +108,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
#define DRV_MODULE_NAME "bcm63xx_udc"
@@ -863,22 +864,7 @@ static void bcm63xx_select_phy_mode(stru
@@ -869,22 +870,7 @@ static void bcm63xx_select_phy_mode(stru
bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
}
@@ -132,7 +132,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
}
/**
@@ -892,14 +878,9 @@ static void bcm63xx_select_phy_mode(stru
@@ -898,14 +884,9 @@ static void bcm63xx_select_phy_mode(stru
*/
static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
{

168
target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch
View File

@@ -1,168 +0,0 @@
From a864a5b3efe9dce1647172d105559a1b850cf4c9 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 14 Jan 2014 15:29:25 -0800
Subject: [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel
code
Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
changed the ENETDMA[CS] macros such that they are no longer macros, but
actual register offset definitions. The bcm63xx_udc driver was not
updated, and as a result, causes the following build error to pop up:
CC drivers/usb/gadget/u_ether.o
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
a function
Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
take an extra channel argument, and use the channel width
(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
doing again what the macro implicitely did for us.
CC: Kevin Cernekee <cernekee@gmail.com>
CC: Jonas Gorski <jogo@openwrt.org>
CC: stable@vger.kernel.org
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Felipe,
This is against your branch as balbi/usb.git, and this fix should be applied to
stable 3.11 onwards.
Thanks!
drivers/usb/gadget/bcm63xx_udc.c | 58 ++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 26 deletions(-)
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -362,24 +362,30 @@ static inline void usb_dma_writel(struct
bcm_writel(val, udc->iudma_regs + off);
}
-static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
{
- return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+ return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
-static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+ int chan)
{
- bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
-static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
{
- return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+ return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
-static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+ int chan)
{
- bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}
static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u
} while (!last_bd);
usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
- ENETDMAC_CHANCFG_REG(iudma->ch_idx));
+ ENETDMAC_CHANCFG_REG, iudma->ch_idx);
}
/**
@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b
bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
/* stop DMA, then wait for the hardware to wrap up */
- usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
+ usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
- while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
+ while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
ENETDMAC_CHANCFG_EN_MASK) {
udelay(1);
@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b
dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
ch_idx);
usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
- ENETDMAC_CHANCFG_REG(ch_idx));
+ ENETDMAC_CHANCFG_REG, ch_idx);
}
}
- usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
+ usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
/* don't leave "live" HW-owned entries for the next guy to step on */
for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b
/* set up IRQs, UBUS burst size, and BD base for this channel */
usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
- ENETDMAC_IRMASK_REG(ch_idx));
- usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
+ ENETDMAC_IRMASK_REG, ch_idx);
+ usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
- usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
- usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
+ usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
+ usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
}
/**
@@ -2016,7 +2022,7 @@ static irqreturn_t bcm63xx_udc_data_isr(
spin_lock(&udc->lock);
usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
- ENETDMAC_IR_REG(iudma->ch_idx));
+ ENETDMAC_IR_REG, iudma->ch_idx);
bep = iudma->bep;
rc = iudma_read(udc, iudma);
@@ -2156,18 +2162,18 @@ static int bcm63xx_iudma_dbg_show(struct
seq_printf(s, " [ep%d]:\n",
max_t(int, iudma_defaults[ch_idx].ep_num, 0));
seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
- usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
+ usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
- sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
- sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
+ sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
+ sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
- usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
+ usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
sram2 >> 16, sram2 & 0xffff,
sram3 >> 16, sram3 & 0xffff,
- usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
+ usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
seq_printf(s, " desc: %d/%d used", iudma->n_bds_used,
iudma->n_bds);