ramips: refresh patches
Removed upstreamed/solved elsewhere upstream: - 0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch - 0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch - 0004-MIPS-ralink-add-MT7621-pcie-driver.patch - 0009-PCI-MIPS-enable-PCIe-on-MT7688.patch - 0025-pinctrl-ralink-add-pinctrl-driver.patch - 0028-GPIO-ralink-add-mt7621-gpio-controller.patch - 0043-spi-add-mt7621-support.patch - 0045-i2c-add-mt7621-driver.patch - 0047-DMA-ralink-add-rt2880-dma-engine.patch - 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch - 0054-mtd-spi-nor-w25q256-respect-default-mode.patch - 0099-pci-mt7620.patch - 304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch Removed because of the new NAND driver: - 0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch - 0039-mtd-add-mt7621-nand-support.patch - 0040-nand-hack.patch Remove patch that no longer applies (needs rework): - 0034-NET-multi-phy-support.patch Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
This commit is contained in:
committed by
Chuanhong Guo
parent
d75c9b8f81
commit
6be0da90a1
@@ -1,12 +1,12 @@
|
||||
--- a/drivers/usb/dwc2/platform.c
|
||||
+++ b/drivers/usb/dwc2/platform.c
|
||||
@@ -406,6 +406,12 @@ static int dwc2_driver_probe(struct plat
|
||||
if (retval)
|
||||
return retval;
|
||||
@@ -432,6 +432,12 @@ static int dwc2_driver_probe(struct plat
|
||||
|
||||
hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
|
||||
|
||||
+ /* Enable USB port before any regs access */
|
||||
+ if (dwc2_readl(hsotg->regs + PCGCTL) & 0x0f) {
|
||||
+ dwc2_writel(0x00, hsotg->regs + PCGCTL);
|
||||
+ if (dwc2_readl(hsotg, PCGCTL) & 0x0f) {
|
||||
+ dwc2_writel(0x00, hsotg, PCGCTL);
|
||||
+ /* TODO: mdelay(25) here? vendor driver don't use it */
|
||||
+ }
|
||||
+
|
||||
|
||||
Reference in New Issue
Block a user