domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

bcm47xx: add support for NETGEAR R6200 V1

Browse Source 
This patch adds supports for the NETGEAR R6200 V1
This device is mainlined in Linux as of 5.4

Specification:
   - SOC: Broadcom BCM4718A1 (480 MHz)
   - Flash: 16MB (Macronix MX25L128)
   - RAM: 128MB DDR2
   - SWITCH: BCM53125
   - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order)
   - WLAN 2.4G: In SOC
   - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360)
   - USB: 1x USB 2.0 port (Type A)
   - Buttons: Reset, WLAN, WPS
   - LED: Amber for Power, others need a workaround
   - UART: 1x UART on PCB

LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7)

Firmware Install Instructions
=============================
Using the device specific .chk, use that file to perform
a normal device upgrade in the OEM admin page.

Signed-off-by: Edward Matijevic <motolav@gmail.com>
This commit is contained in:
Edward Matijevic
2020-06-23 14:50:04 -05:00
committed by Adrian Schmutzler
parent 46a6586c83
commit 6da3194127
5 changed files with 73 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/bcm47xx/base-files/etc/board.d/01_network
View File

@@ -177,6 +177,11 @@ configure_by_model() {
"0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
;;
"Netgear R6200 V1")
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "8@eth0"
;;
"Netgear WN2500RP V1")
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"

1
target/linux/bcm47xx/base-files/lib/upgrade/platform.sh
View File

@@ -18,6 +18,7 @@ platform_expected_image() {
local model="$(cat /tmp/sysinfo/model)"
case "$model" in
"Netgear R6200 V1") echo "chk U12H192T00_NETGEAR"; return;;
"Netgear WGR614 V8") echo "chk U12H072T00_NETGEAR"; return;;
"Netgear WGR614 V9") echo "chk U12H094T00_NETGEAR"; return;;
"Netgear WGR614 V10") echo "chk U12H139T01_NETGEAR"; return;;