bcm53xx: add support for Asus RT-AC88U
Asus RT-AC88U is an AC3100 router featuring 9 Ethernet ports over the integrated Broadcom and the external Realtek switch. Hardware info: * Processor: Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz * Switch: BCM53012 in BCM4709C0KFEBG & external RTL8365MB * DDR3 RAM: 512 MB * Flash: 128 MB (ESMT F59L1G81LA-25T) * 2.4GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * 5GHz: BCM4366 4×4 2.4/5G single chip 802.11ac SoC * Ports: 8 Ports, 1 WAN Ports Flashing instructions: * Boot to CFE Recovery Mode by holding the reset button while power-on. * Connect to the router with an ethernet cable. * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0. * Head to http://192.168.1.1. * Reset NVRAM. * Upload the OpenWrt image. CFE bootloader may reject flashing the image due to image integrity check. In that case, follow the instructions below. * Rename the OpenWrt image as firmware.trx. * Run a TFTP server and make it serve the firmware.trx file. * Run the URL below on a browser or curl. http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> [rmilecki: mark BROKEN until we sort out nvram & CFE recovery] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
		 Arınç ÜNAL
					Arınç ÜNAL
				
			
				
					committed by
					
						 Rafał Miłecki
						Rafał Miłecki
					
				
			
			
				
	
			
			
			 Rafał Miłecki
						Rafał Miłecki
					
				
			
						parent
						
							fc6a83e63b
						
					
				
				
					commit
					72b9b721d7
				
			| @@ -13,6 +13,9 @@ bcm53xx_setup_interfaces() | |||||||
| 	asus,rt-ac87u) | 	asus,rt-ac87u) | ||||||
| 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" | 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" | ||||||
| 		;; | 		;; | ||||||
|  | 	asus,rt-ac88u) | ||||||
|  | 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 extsw" "wan" | ||||||
|  | 		;; | ||||||
| 	linksys,panamera) | 	linksys,panamera) | ||||||
| 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan" | 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 extsw" "wan" | ||||||
| 		;; | 		;; | ||||||
|   | |||||||
| @@ -167,6 +167,15 @@ define Device/asus_rt-ac87u | |||||||
| endef | endef | ||||||
| TARGET_DEVICES += asus_rt-ac87u | TARGET_DEVICES += asus_rt-ac87u | ||||||
|  |  | ||||||
|  | define Device/asus_rt-ac88u | ||||||
|  |   $(call Device/asus) | ||||||
|  |   DEVICE_MODEL := RT-AC88U | ||||||
|  |   DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES) | ||||||
|  |   ASUS_PRODUCTID := RT-AC88U | ||||||
|  |   BROKEN := y | ||||||
|  | endef | ||||||
|  | TARGET_DEVICES += asus_rt-ac88u | ||||||
|  |  | ||||||
| define Device/asus_rt-n18u | define Device/asus_rt-n18u | ||||||
|   $(call Device/asus) |   $(call Device/asus) | ||||||
|   DEVICE_MODEL := RT-N18U |   DEVICE_MODEL := RT-N18U | ||||||
|   | |||||||
		Reference in New Issue
	
	Block a user