gemini: Set proper default networks
Some Gemini devices are NAS type devices and need to ask for DHCP IP on eth0. Some has a LAN/WAN setup. Add sensible defaults for all known devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
		 Linus Walleij
					Linus Walleij
				
			
				
					committed by
					
						 Christian Lamparter
						Christian Lamparter
					
				
			
			
				
	
			
			
			 Christian Lamparter
						Christian Lamparter
					
				
			
						parent
						
							50d20db6a8
						
					
				
				
					commit
					772434e707
				
			| @@ -9,16 +9,31 @@ dlink,dir-685) | |||||||
| 	ucidef_set_interface "eth" device "eth0" protocol "none" | 	ucidef_set_interface "eth" device "eth0" protocol "none" | ||||||
| 	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" | 	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" | ||||||
| 	;; | 	;; | ||||||
|  | dlink,dns-313|\ | ||||||
|  | edimax,ns-2502|\ | ||||||
|  | raidsonic,ib-4220-b|\ | ||||||
|  | wiliboard,wbd111|\ | ||||||
|  | wiliboard,wbd222) | ||||||
|  | 	# NAS machines with a single ethernet port | ||||||
|  | 	ucidef_set_interface_lan "eth0" "dhcp" | ||||||
|  | 	;; | ||||||
| itian,sq201) | itian,sq201) | ||||||
| 	# These are all connected to eth1 thru VSC7395 | 	# These are all connected to eth1 thru VSC7395 | ||||||
| 	ucidef_set_interface "eth" device "eth1" protocol "none" | 	ucidef_set_interface "eth" device "eth1" protocol "none" | ||||||
| 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" | 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" | ||||||
| 	;; | 	;; | ||||||
|  | ssi,1328) | ||||||
|  | 	ucidef_set_interfaces_lan_wan "eth0" "eth1" | ||||||
|  | 	;; | ||||||
| storlink,gemini324) | storlink,gemini324) | ||||||
| 	# These are all connected to eth1 thru VSC7385 | 	# These are all connected to eth1 thru VSC7385 | ||||||
| 	ucidef_set_interface "eth" device "eth1" protocol "none" | 	ucidef_set_interface "eth" device "eth1" protocol "none" | ||||||
| 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" | 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" | ||||||
| 	;; | 	;; | ||||||
|  | teltonika,rut1xx) | ||||||
|  | 	# One ethernet LAN which is offering DHCP | ||||||
|  | 	ucidef_set_interface_lan "eth0" | ||||||
|  | 	;; | ||||||
| esac | esac | ||||||
|  |  | ||||||
| board_config_flush | board_config_flush | ||||||
|   | |||||||
		Reference in New Issue
	
	Block a user