ramips: add support for Amped Wireless B1200EX

This device is almost identical to the already supported Edimax
EW-7476RP5, the only differences are:
- There is no mode selection slider switch on this device
- The two wireless LEDs are green instead of blue
- Model name in the CSYS header is RN10

Additional changes:
- Moved WiFi LEDs and the slider switch to the individual dt files
- Added ieee80211-freq-limit to the mt7612e radio to properly disable
  2.4GHz band on this radio

Device specifications:
SoC:	MediaTek MT7620a @ 580MHz
RAM:	64M (Winbond W9751G6KB-25)
FLASH:	8MB (Macronix)
WiFi:	SoC-integrated: MediaTek MT7620a bgn
WiFi:	MediaTek MT7612EN nac
GbE:	1x (RTL8211E)
BTN:	WPS/RESET
LED:	- WiFi 5G (green)
	- WiFi 2.4G (green)
	- Signal Strength (green)
	- Power (green)
	- WPS (green)
	- LAN (green)
UART:	UART is present as Pads with throughholes on the PCB. They are
	located next to the WPS button
	3.3V - RX - GND - TX / 57600-8N1
	3.3V is the square pad

Installation:
Upload the sysupgrade image via the default web interface

Signed-off-by: Daniel Fuchs <software@sagacioussuricata.com>
This commit is contained in:
Daniel Fuchs
2022-10-25 01:13:30 +00:00
committed by Hauke Mehrtens
parent 0cfd15552e
commit 794d1645b3
7 changed files with 118 additions and 32 deletions

View File

@@ -75,6 +75,19 @@ define Device/amit_jboot
DEVICE_PACKAGES := jboot-tools kmod-usb2 kmod-usb-ohci
endef
define Device/ampedwireless_b1200ex
SOC := mt7620a
DEVICE_VENDOR := Amped Wireless
DEVICE_MODEL := B1200EX
BLOCKSIZE := 4k
IMAGE_SIZE := 7744k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN10 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size | append-metadata
DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
endef
TARGET_DEVICES += ampedwireless_b1200ex
define Device/asus_rp-n53
SOC := mt7620a
IMAGE_SIZE := 7872k