ramips: add support for Asus RT-AC65P
The Asus RT-AC65P router is identical with the RT-AC85P, but better to make separate images for it. On both routers the installation can be done also via SSH: Note: The user/password for SSH is identical with the one used in the Web-interface. 1. Complete the initial setup wizard. 2. Activate SSH under "Administration" -> "System". 3. Transfer the OpenWrt factory image via scp: > scp openwrt-ramips-mt7621-asus_rt-ac65p-squashfs-factory.bin admin@192.168.50.1:/tmp 4. Connect via SSH to the router. > ssh admin@192.168.50.1 5. Write the OpenWrt image to flash. > mtd-write -i /tmp/openwrt-ramips-mt7621-asus_rt-ac65p-squashfs-factory.bin -d linux 6. Reboot the router > reboot Changelog: v3: removed [] from filename, rebased to latest master v2: Rebased to latest master v1: Initial release Signed-off-by: Gabor Varga <vargagab@gmail.com>
This commit is contained in:
		
				
					committed by
					
						
						John Crispin
					
				
			
			
				
	
			
			
			
						parent
						
							49db2026e5
						
					
				
				
					commit
					7c5f712e4f
				
			@@ -234,6 +234,7 @@ ramips_setup_interfaces()
 | 
			
		||||
		ucidef_add_switch "switch0" \
 | 
			
		||||
			"0:lan" "1:wan" "6@eth0"
 | 
			
		||||
		;;
 | 
			
		||||
	asus,rt-ac65p|\
 | 
			
		||||
	asus,rt-ac85p|\
 | 
			
		||||
	dlink,dir-860l-b1|\
 | 
			
		||||
	elecom,wrc-1167ghbk2-s|\
 | 
			
		||||
@@ -562,6 +563,7 @@ ramips_setup_macs()
 | 
			
		||||
	zbtlink,zbt-we3526)
 | 
			
		||||
		wan_mac=$(mtd_get_mac_binary factory 0xe006)
 | 
			
		||||
		;;
 | 
			
		||||
	asus,rt-ac65p|\
 | 
			
		||||
	asus,rt-ac85p)
 | 
			
		||||
		wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
 | 
			
		||||
		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
 | 
			
		||||
 
 | 
			
		||||
@@ -18,6 +18,7 @@ platform_do_upgrade() {
 | 
			
		||||
	mikrotik,rbm33g)
 | 
			
		||||
		[ -z "$(rootfs_type)" ] && mtd erase firmware
 | 
			
		||||
		;;
 | 
			
		||||
	asus,rt-ac65p|\
 | 
			
		||||
	asus,rt-ac85p)
 | 
			
		||||
		echo "Backing up firmware"
 | 
			
		||||
		dd if=/dev/mtd4 bs=1024 count=4096  > /tmp/backup_firmware.bin
 | 
			
		||||
@@ -27,6 +28,7 @@ platform_do_upgrade() {
 | 
			
		||||
	esac
 | 
			
		||||
 | 
			
		||||
	case "$board" in
 | 
			
		||||
	asus,rt-ac65p|\
 | 
			
		||||
	asus,rt-ac85p|\
 | 
			
		||||
	hiwifi,hc5962|\
 | 
			
		||||
	netgear,r6220|\
 | 
			
		||||
 
 | 
			
		||||
							
								
								
									
										9
									
								
								target/linux/ramips/dts/mt7621_asus_rt-ac65p.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										9
									
								
								target/linux/ramips/dts/mt7621_asus_rt-ac65p.dts
									
									
									
									
									
										Normal file
									
								
							@@ -0,0 +1,9 @@
 | 
			
		||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 | 
			
		||||
/dts-v1/;
 | 
			
		||||
 | 
			
		||||
#include "mt7621_asus_rt-acx5p.dtsi"
 | 
			
		||||
 | 
			
		||||
/ {
 | 
			
		||||
	compatible = "asus,rt-ac65p", "mediatek,mt7621-soc";
 | 
			
		||||
	model = "ASUS RT-AC65P";
 | 
			
		||||
};
 | 
			
		||||
@@ -1,162 +1,9 @@
 | 
			
		||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 | 
			
		||||
/dts-v1/;
 | 
			
		||||
 | 
			
		||||
#include "mt7621.dtsi"
 | 
			
		||||
 | 
			
		||||
#include <dt-bindings/gpio/gpio.h>
 | 
			
		||||
#include <dt-bindings/input/input.h>
 | 
			
		||||
#include "mt7621_asus_rt-acx5p.dtsi"
 | 
			
		||||
 | 
			
		||||
/ {
 | 
			
		||||
	compatible = "asus,rt-ac85p", "mediatek,mt7621-soc";
 | 
			
		||||
	model = "ASUS RT-AC85P";
 | 
			
		||||
 | 
			
		||||
	aliases {
 | 
			
		||||
		led-boot = &led_power;
 | 
			
		||||
		led-failsafe = &led_power;
 | 
			
		||||
		led-running = &led_power;
 | 
			
		||||
		led-upgrade = &led_power;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	chosen {
 | 
			
		||||
		bootargs = "console=ttyS0,57600";
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	palmbus: palmbus@1E000000 {
 | 
			
		||||
		i2c@900 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	keys {
 | 
			
		||||
		compatible = "gpio-keys";
 | 
			
		||||
 | 
			
		||||
		reset {
 | 
			
		||||
			label = "reset";
 | 
			
		||||
			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_RESTART>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps {
 | 
			
		||||
			label = "wps";
 | 
			
		||||
			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_WPS_BUTTON>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	leds {
 | 
			
		||||
		compatible = "gpio-leds";
 | 
			
		||||
 | 
			
		||||
		led_power: power {
 | 
			
		||||
			label = "rt-ac85p:blue:power";
 | 
			
		||||
			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,default-trigger = "phy0tpt";
 | 
			
		||||
		};
 | 
			
		||||
		wlan2g {
 | 
			
		||||
			label = "rt-ac85p:blue:wlan2g";
 | 
			
		||||
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,default-trigger = "phy0radio";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wlan5g {
 | 
			
		||||
			label = "rt-ac85p:blue:wlan5g";
 | 
			
		||||
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,default-trigger = "phy1radio";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&sdhci {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&nand {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
 | 
			
		||||
	partitions {
 | 
			
		||||
		compatible = "fixed-partitions";
 | 
			
		||||
		#address-cells = <1>;
 | 
			
		||||
		#size-cells = <1>;
 | 
			
		||||
 | 
			
		||||
		partition@0 {
 | 
			
		||||
			label = "u-boot";
 | 
			
		||||
			reg = <0x0 0xe0000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@e0000 {
 | 
			
		||||
			label = "u-boot-env";
 | 
			
		||||
			reg = <0xe0000 0x100000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		factory: partition@1e0000 {
 | 
			
		||||
			label = "factory";
 | 
			
		||||
			reg = <0x1e0000 0x100000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		factory2: partition@2e0000 {
 | 
			
		||||
			label = "factory2";
 | 
			
		||||
			reg = <0x2e0000 0x100000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@3e0000 {
 | 
			
		||||
			label = "kernel";
 | 
			
		||||
			reg = <0x3e0000 0x400000>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@7e0000 {
 | 
			
		||||
			label = "ubi";
 | 
			
		||||
			reg = <0x7e0000 0x2e00000>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@35e0000 {
 | 
			
		||||
			label = "firmware2";
 | 
			
		||||
			reg = <0x35e0000 0x3200000>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie0 {
 | 
			
		||||
	wifi0: wifi@0,0 {
 | 
			
		||||
		compatible = "pci14c3,7615";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x0000>;
 | 
			
		||||
		ieee80211-freq-limit = <2400000 2500000>;
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie1 {
 | 
			
		||||
	wifi1: wifi@0,0 {
 | 
			
		||||
		compatible = "pci14c3,7615";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x8000>;
 | 
			
		||||
		ieee80211-freq-limit = <5000000 6000000>;
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
ðernet {
 | 
			
		||||
	mtd-mac-address = <&factory 0xe000>;
 | 
			
		||||
	mediatek,portmap = "wllll";
 | 
			
		||||
	port@5 {
 | 
			
		||||
		status = "disabled";
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&i2c {
 | 
			
		||||
	status = "disabled";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pinctrl {
 | 
			
		||||
	state_default: pinctrl0 {
 | 
			
		||||
		gpio {
 | 
			
		||||
			ralink,group = "uart2", "uart3", "i2c";
 | 
			
		||||
			ralink,function = "gpio";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
};
 | 
			
		||||
							
								
								
									
										159
									
								
								target/linux/ramips/dts/mt7621_asus_rt-acx5p.dtsi
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										159
									
								
								target/linux/ramips/dts/mt7621_asus_rt-acx5p.dtsi
									
									
									
									
									
										Normal file
									
								
							@@ -0,0 +1,159 @@
 | 
			
		||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 | 
			
		||||
/dts-v1/;
 | 
			
		||||
 | 
			
		||||
#include "mt7621.dtsi"
 | 
			
		||||
 | 
			
		||||
#include <dt-bindings/gpio/gpio.h>
 | 
			
		||||
#include <dt-bindings/input/input.h>
 | 
			
		||||
 | 
			
		||||
/ {
 | 
			
		||||
	aliases {
 | 
			
		||||
		led-boot = &led_power;
 | 
			
		||||
		led-failsafe = &led_power;
 | 
			
		||||
		led-running = &led_power;
 | 
			
		||||
		led-upgrade = &led_power;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	chosen {
 | 
			
		||||
		bootargs = "console=ttyS0,57600";
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	palmbus: palmbus@1E000000 {
 | 
			
		||||
		i2c@900 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	keys {
 | 
			
		||||
		compatible = "gpio-keys";
 | 
			
		||||
 | 
			
		||||
		reset {
 | 
			
		||||
			label = "reset";
 | 
			
		||||
			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_RESTART>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps {
 | 
			
		||||
			label = "wps";
 | 
			
		||||
			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_WPS_BUTTON>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	leds {
 | 
			
		||||
		compatible = "gpio-leds";
 | 
			
		||||
 | 
			
		||||
		led_power: power {
 | 
			
		||||
			label = "rt-ac85p:blue:power";
 | 
			
		||||
			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,default-trigger = "phy0tpt";
 | 
			
		||||
		};
 | 
			
		||||
		wlan2g {
 | 
			
		||||
			label = "rt-ac85p:blue:wlan2g";
 | 
			
		||||
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,default-trigger = "phy0radio";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wlan5g {
 | 
			
		||||
			label = "rt-ac85p:blue:wlan5g";
 | 
			
		||||
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,default-trigger = "phy1radio";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&sdhci {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&nand {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
 | 
			
		||||
	partitions {
 | 
			
		||||
		compatible = "fixed-partitions";
 | 
			
		||||
		#address-cells = <1>;
 | 
			
		||||
		#size-cells = <1>;
 | 
			
		||||
 | 
			
		||||
		partition@0 {
 | 
			
		||||
			label = "u-boot";
 | 
			
		||||
			reg = <0x0 0xe0000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@e0000 {
 | 
			
		||||
			label = "u-boot-env";
 | 
			
		||||
			reg = <0xe0000 0x100000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		factory: partition@1e0000 {
 | 
			
		||||
			label = "factory";
 | 
			
		||||
			reg = <0x1e0000 0x100000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		factory2: partition@2e0000 {
 | 
			
		||||
			label = "factory2";
 | 
			
		||||
			reg = <0x2e0000 0x100000>;
 | 
			
		||||
			read-only;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@3e0000 {
 | 
			
		||||
			label = "kernel";
 | 
			
		||||
			reg = <0x3e0000 0x400000>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@7e0000 {
 | 
			
		||||
			label = "ubi";
 | 
			
		||||
			reg = <0x7e0000 0x2e00000>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		partition@35e0000 {
 | 
			
		||||
			label = "firmware2";
 | 
			
		||||
			reg = <0x35e0000 0x3200000>;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie0 {
 | 
			
		||||
	wifi0: wifi@0,0 {
 | 
			
		||||
		compatible = "pci14c3,7615";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x0000>;
 | 
			
		||||
		ieee80211-freq-limit = <2400000 2500000>;
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie1 {
 | 
			
		||||
	wifi1: wifi@0,0 {
 | 
			
		||||
		compatible = "pci14c3,7615";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x8000>;
 | 
			
		||||
		ieee80211-freq-limit = <5000000 6000000>;
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
ðernet {
 | 
			
		||||
	mtd-mac-address = <&factory 0xe000>;
 | 
			
		||||
	mediatek,portmap = "wllll";
 | 
			
		||||
	port@5 {
 | 
			
		||||
		status = "disabled";
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&i2c {
 | 
			
		||||
	status = "disabled";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pinctrl {
 | 
			
		||||
	state_default: pinctrl0 {
 | 
			
		||||
		gpio {
 | 
			
		||||
			ralink,group = "uart2", "uart3", "i2c";
 | 
			
		||||
			ralink,function = "gpio";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
@@ -125,6 +125,22 @@ define Device/asus_rt-ac57u
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += asus_rt-ac57u
 | 
			
		||||
 | 
			
		||||
define Device/asus_rt-ac65p
 | 
			
		||||
  MTK_SOC := mt7621
 | 
			
		||||
  DEVICE_VENDOR := ASUS
 | 
			
		||||
  DEVICE_MODEL := RT-AC65P
 | 
			
		||||
  IMAGE_SIZE := 51200k
 | 
			
		||||
  UBINIZE_OPTS := -E 5
 | 
			
		||||
  BLOCKSIZE := 128k
 | 
			
		||||
  PAGESIZE := 2048
 | 
			
		||||
  KERNEL_SIZE := 4096k
 | 
			
		||||
  IMAGES += factory.bin
 | 
			
		||||
  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 | 
			
		||||
  IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
 | 
			
		||||
  DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += asus_rt-ac65p
 | 
			
		||||
 | 
			
		||||
define Device/asus_rt-ac85p
 | 
			
		||||
  MTK_SOC := mt7621
 | 
			
		||||
  DEVICE_VENDOR := ASUS
 | 
			
		||||
 
 | 
			
		||||
		Reference in New Issue
	
	Block a user