domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

kernel: bump to 4.9.105

Browse Source 
Refresh patches.

Drop patches that have been upstreamed:
target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
target/linux/generic/backport-4.9/095-v4.12-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch
target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
target/linux/generic/pending-4.9/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch
target/linux/generic/pending-4.9/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch

Compile & run tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
This commit is contained in:
Kevin Darbyshire-Bryant
2018-05-31 19:49:08 +00:00
committed by John Crispin
parent 5b0c899bfd
commit 7dca1bae82
36 changed files with 439 additions and 681 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/layerscape/patches-4.9/202-core-linux-support-layerscape.patch
View File

@@ -411,7 +411,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
#endif /* __SOC_BUS_H */
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -35,6 +35,7 @@
@@ -36,6 +36,7 @@
#define ETH_DATA_LEN 1500 /* Max. octets in payload */
#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
#define ETH_FCS_LEN 4 /* Octets in the FCS */

2
target/linux/layerscape/patches-4.9/702-pci-support-layerscape.patch
View File

@@ -2060,7 +2060,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
}
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4654,3 +4654,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
@@ -4659,3 +4659,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid);

2
target/linux/layerscape/patches-4.9/704-fsl-mc-layerscape-support.patch
View File

@@ -8267,7 +8267,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
.msi_prepare = its_fsl_mc_msi_prepare,
};
@@ -95,8 +95,8 @@ int __init its_fsl_mc_msi_init(void)
@@ -97,8 +97,8 @@ int __init its_fsl_mc_msi_init(void)
continue;
}

8
target/linux/layerscape/patches-4.9/810-iommu-support-layerscape.patch
View File

@@ -995,7 +995,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
};
struct dmar_atsr_unit {
@@ -4252,27 +4253,40 @@ static inline void init_iommu_pm_ops(voi
@@ -4251,27 +4252,40 @@ static inline void init_iommu_pm_ops(voi
int __init dmar_parse_one_rmrr(struct acpi_dmar_header *header, void *arg)
{
struct acpi_dmar_reserved_memory *rmrr;
@@ -1041,7 +1041,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
}
static struct dmar_atsr_unit *dmar_find_atsr(struct acpi_dmar_atsr *atsr)
@@ -4486,6 +4500,7 @@ static void intel_iommu_free_dmars(void)
@@ -4485,6 +4499,7 @@ static void intel_iommu_free_dmars(void)
list_for_each_entry_safe(rmrru, rmrr_n, &dmar_rmrr_units, list) {
list_del(&rmrru->list);
dmar_free_dev_scope(&rmrru->devices, &rmrru->devices_cnt);
@@ -1049,7 +1049,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
kfree(rmrru);
}
@@ -5221,6 +5236,45 @@ static void intel_iommu_remove_device(st
@@ -5220,6 +5235,45 @@ static void intel_iommu_remove_device(st
iommu_device_unlink(iommu->iommu_dev, dev);
}
@@ -1095,7 +1095,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
#ifdef CONFIG_INTEL_IOMMU_SVM
#define MAX_NR_PASID_BITS (20)
static inline unsigned long intel_iommu_get_pts(struct intel_iommu *iommu)
@@ -5351,19 +5405,21 @@ struct intel_iommu *intel_svm_device_to_
@@ -5350,19 +5404,21 @@ struct intel_iommu *intel_svm_device_to_
#endif /* CONFIG_INTEL_IOMMU_SVM */
static const struct iommu_ops intel_iommu_ops = {

10
target/linux/layerscape/patches-4.9/816-tty-serial-support-layerscape.patch
View File

@@ -117,12 +117,16 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
}
/*
@@ -1899,9 +1922,13 @@ static int lpuart_probe(struct platform_
@@ -1899,13 +1922,13 @@ static int lpuart_probe(struct platform_
ret = of_alias_get_id(np, "serial");
if (ret < 0) {
- dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
- return ret;
- }
- if (ret >= ARRAY_SIZE(lpuart_ports)) {
- dev_err(&pdev->dev, "serial%d out of range\n", ret);
- return -EINVAL;
+ ret = find_first_zero_bit(linemap, UART_NR);
+ if (ret >= UART_NR) {
+ dev_err(&pdev->dev, "port line is full, add device failed\n");
@@ -133,7 +137,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
sport->port.line = ret;
sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
@@ -1983,6 +2010,7 @@ static int lpuart_remove(struct platform
@@ -1987,6 +2010,7 @@ static int lpuart_remove(struct platform
struct lpuart_port *sport = platform_get_drvdata(pdev);
uart_remove_one_port(&lpuart_reg, &sport->port);
@@ -141,7 +145,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
clk_disable_unprepare(sport->clk);
@@ -2067,12 +2095,10 @@ static int lpuart_resume(struct device *
@@ -2071,12 +2095,10 @@ static int lpuart_resume(struct device *
if (sport->lpuart_dma_rx_use) {
if (sport->port.irq_wake) {

32
target/linux/layerscape/patches-4.9/817-usb-support-layerscape.patch
View File

@@ -206,7 +206,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
mode = USB_DR_MODE_HOST;
else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
@@ -213,8 +232,9 @@ static void dwc3_frame_length_adjustment
@@ -227,8 +246,9 @@ static void dwc3_frame_length_adjustment
reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
dft = reg & DWC3_GFLADJ_30MHZ_MASK;
@@ -218,7 +218,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
reg &= ~DWC3_GFLADJ_30MHZ_MASK;
reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
@@ -585,6 +605,99 @@ static int dwc3_phy_setup(struct dwc3 *d
@@ -599,6 +619,99 @@ static int dwc3_phy_setup(struct dwc3 *d
return 0;
}
@@ -318,7 +318,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
static void dwc3_core_exit(struct dwc3 *dwc)
{
dwc3_event_buffers_cleanup(dwc);
@@ -727,6 +840,8 @@ static int dwc3_core_init(struct dwc3 *d
@@ -741,6 +854,8 @@ static int dwc3_core_init(struct dwc3 *d
if (ret)
goto err1;
@@ -327,7 +327,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
/* Adjust Frame Length */
dwc3_frame_length_adjustment(dwc);
@@ -925,11 +1040,117 @@ static void dwc3_core_exit_mode(struct d
@@ -939,11 +1054,117 @@ static void dwc3_core_exit_mode(struct d
}
}
@@ -445,7 +445,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
struct resource *res;
struct dwc3 *dwc;
u8 lpm_nyet_threshold;
@@ -961,6 +1182,11 @@ static int dwc3_probe(struct platform_de
@@ -975,6 +1196,11 @@ static int dwc3_probe(struct platform_de
dwc->xhci_resources[0].flags = res->flags;
dwc->xhci_resources[0].name = res->name;
@@ -457,7 +457,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
res->start += DWC3_GLOBALS_REGS_START;
/*
@@ -1003,6 +1229,12 @@ static int dwc3_probe(struct platform_de
@@ -1017,6 +1243,12 @@ static int dwc3_probe(struct platform_de
dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
@@ -470,7 +470,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
dwc->disable_scramble_quirk = device_property_read_bool(dev,
"snps,disable_scramble_quirk");
dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
@@ -1047,6 +1279,8 @@ static int dwc3_probe(struct platform_de
@@ -1061,6 +1293,8 @@ static int dwc3_probe(struct platform_de
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
@@ -479,7 +479,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
platform_set_drvdata(pdev, dwc);
dwc3_cache_hwparams(dwc);
@@ -1070,6 +1304,11 @@ static int dwc3_probe(struct platform_de
@@ -1084,6 +1318,11 @@ static int dwc3_probe(struct platform_de
if (ret < 0)
goto err1;
@@ -542,7 +542,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
#define DWC3_GCTL_PRTCAP_HOST 1
@@ -292,6 +318,10 @@
@@ -294,6 +320,10 @@
/* Global Frame Length Adjustment Register */
#define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7)
#define DWC3_GFLADJ_30MHZ_MASK 0x3f
@@ -553,7 +553,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14)
@@ -756,6 +786,7 @@ struct dwc3_scratchpad_array {
@@ -758,6 +788,7 @@ struct dwc3_scratchpad_array {
* @regs: base address for our registers
* @regs_size: address space size
* @fladj: frame length adjustment
@@ -561,7 +561,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* @irq_gadget: peripheral controller's IRQ number
* @nr_scratch: number of scratch buffers
* @u1u2: only used on revisions <1.83a for workaround
@@ -832,6 +863,7 @@ struct dwc3_scratchpad_array {
@@ -834,6 +865,7 @@ struct dwc3_scratchpad_array {
* 1 - -3.5dB de-emphasis
* 2 - No de-emphasis
* 3 - Reserved
@@ -569,7 +569,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
*/
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
@@ -850,6 +882,7 @@ struct dwc3 {
@@ -852,6 +884,7 @@ struct dwc3 {
spinlock_t lock;
struct device *dev;
@@ -577,7 +577,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
struct platform_device *xhci;
struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
@@ -875,6 +908,12 @@ struct dwc3 {
@@ -877,6 +910,12 @@ struct dwc3 {
enum usb_phy_interface hsphy_mode;
u32 fladj;
@@ -590,7 +590,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
u32 irq_gadget;
u32 nr_scratch;
u32 u1u2;
@@ -951,9 +990,12 @@ struct dwc3 {
@@ -953,9 +992,12 @@ struct dwc3 {
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
unsigned has_hibernation:1;
@@ -603,7 +603,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
unsigned pending_events:1;
unsigned pullups_connected:1;
unsigned setup_packet_pending:1;
@@ -974,9 +1016,16 @@ struct dwc3 {
@@ -976,9 +1018,16 @@ struct dwc3 {
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
unsigned dis_del_phy_power_chg_quirk:1;
@@ -822,7 +822,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
curr_ep = get_ep_by_pipe(udc, i);
/* If the ep is configured */
- if (curr_ep->name == NULL) {
- if (!curr_ep->ep.name) {
+ if (strncmp(curr_ep->name, "ep", 2)) {
WARNING("Invalid EP?");
continue;