toolchain/binutils: backport stable patches

Add the patches with real changes from the binutils 2.40 stable branch. I am not aware that we ran into any of these problems, but I think it is better to take the existing stable patches. They were exported like this: git format-patch binutils-2_40...origin/binutils-2_40-branch I removed the patches changing the version numbers and updating the translations only. I removed the following patches: *Automatic-date-updat* 001-Re-enable-development.-Update-version-to-2.40.0.patch 004-Updated-translations-for-the-gas-and-binutils-sub-di.patch 015-Updated-Swedish-translation-for-the-binutils-sub-dir.patch 027-Updated-Swedish-translation-for-the-binutils-sub-dir.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-02-20 22:35:50 +01:00
parent 339a67cb7f
commit 801c88295e
11 changed files with 2674 additions and 0 deletions
--- a/toolchain/binutils/patches/2.40/005-libctf-update-regexp-to-allow-makeinfo-to-build-docu.patch
+++ b/toolchain/binutils/patches/2.40/005-libctf-update-regexp-to-allow-makeinfo-to-build-docu.patch
@@ -0,0 +1,70 @@
 From f7c5db99b76e8dde89335d794c82fcbfbf53c612 Mon Sep 17 00:00:00 2001
 From: Enze Li <enze.li@hotmail.com>
 Date: Sat, 14 Jan 2023 11:33:48 +0800
 Subject: [PATCH 05/50] libctf: update regexp to allow makeinfo to build
 document
 While trying to build gdb on latest openSUSE Tumbleweed, I noticed the
 following warning,
 checking for makeinfo... makeinfo --split-size=5000000
 configure: WARNING:
 *** Makeinfo is too old. Info documentation will not be built.
 then I checked the version of makeinfo, it said,
 ======
 $ makeinfo --version
 texi2any (GNU texinfo) 7.0.1
 Copyright (C) 2022 Free Software Foundation, Inc.
 License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
 This is free software: you are free to change and redistribute it.
 There is NO WARRANTY, to the extent permitted by law.
 ======
 After digging a little bit, it became quite obvious that a dot is
 missing in regexp that makes it impossible to match versions higher than
 7.0, and here's the solution:
 -       | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then
 +       | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]\.[0-9])' >/dev/null 2>&1; then
 However, Eli pointed out that the solution above has another problem: it
 will stop working when Texinfo 10.1 will be released.  Meanwhile, he
 suggested to solve this problem permanently.  That is, we don't care
 about the minor version for Texinfo > 6.9, we only care about the major
 version.
 In this way, the problem will be resolved permanently, thanks to Eli.
 libctf/ChangeLog:
 	* configure: Regenerated.
 	* configure.ac: Update regexp to match versions higher than 7.0.
 ---
 libctf/configure    | 2 +-
 libctf/configure.ac | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
 --- a/libctf/configure
 +++ b/libctf/configure
@@ -14865,7 +14865,7 @@ esac
     # We require texinfo to be 6.3 or later, for a working synindex
     # and validatemenus: otherwise we fall back to /bin/true.
     if ${MAKEINFO} --version \
 -       | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then
 +       | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]|[1-6][0-9])' >/dev/null 2>&1; then
       build_info=yes
     else
         build_info=
 --- a/libctf/configure.ac
 +++ b/libctf/configure.ac
@@ -184,7 +184,7 @@ changequote(,)
     # We require texinfo to be 6.3 or later, for a working synindex
     # and validatemenus: otherwise we fall back to /bin/true.
     if ${MAKEINFO} --version \
 -       | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then
 +       | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]|[1-6][0-9])' >/dev/null 2>&1; then
       build_info=yes
     else
         build_info=
--- a/toolchain/binutils/patches/2.40/007-Fix-version-number-snafu-in-some-configuration-files.patch
+++ b/toolchain/binutils/patches/2.40/007-Fix-version-number-snafu-in-some-configuration-files.patch
@@ -0,0 +1,444 @@
 From 59706683feafb6252d0ad369cf8759f75fd147be Mon Sep 17 00:00:00 2001
 From: Nick Clifton <nickc@redhat.com>
 Date: Tue, 17 Jan 2023 12:02:56 +0000
 Subject: [PATCH 07/50] Fix version number snafu in some configuration files:
 2.40.00 should be 2.40
 ---
 binutils/configure             | 20 ++++++++++----------
 gprof/configure                | 20 ++++++++++----------
 gprofng/configure              | 20 ++++++++++----------
 gprofng/doc/version.texi       |  4 ++--
 gprofng/libcollector/configure | 20 ++++++++++----------
 ld/configure                   | 20 ++++++++++----------
 6 files changed, 52 insertions(+), 52 deletions(-)
 --- a/binutils/configure
 +++ b/binutils/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for binutils 2.40.00.
 +# Generated by GNU Autoconf 2.69 for binutils 2.40.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='binutils'
 PACKAGE_TARNAME='binutils'
 -PACKAGE_VERSION='2.40.00'
 -PACKAGE_STRING='binutils 2.40.00'
 +PACKAGE_VERSION='2.40'
 +PACKAGE_STRING='binutils 2.40'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1401,7 +1401,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures binutils 2.40.00 to adapt to many kinds of systems.
 +\`configure' configures binutils 2.40 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1472,7 +1472,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of binutils 2.40.00:";;
 +     short | recursive ) echo "Configuration of binutils 2.40:";;
    esac
   cat <<\_ACEOF
@@ -1631,7 +1631,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -binutils configure 2.40.00
 +binutils configure 2.40
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2099,7 +2099,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by binutils $as_me 2.40.00, which was
 +It was created by binutils $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3081,7 +3081,7 @@ fi
 # Define the identity of the package.
  PACKAGE='binutils'
 - VERSION='2.40.00'
 + VERSION='2.40'
 cat >>confdefs.h <<_ACEOF
@@ -15326,7 +15326,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by binutils $as_me 2.40.00, which was
 +This file was extended by binutils $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -15392,7 +15392,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -binutils config.status 2.40.00
 +binutils config.status 2.40
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gprof/configure
 +++ b/gprof/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gprof 2.40.00.
 +# Generated by GNU Autoconf 2.69 for gprof 2.40.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gprof'
 PACKAGE_TARNAME='gprof'
 -PACKAGE_VERSION='2.40.00'
 -PACKAGE_STRING='gprof 2.40.00'
 +PACKAGE_VERSION='2.40'
 +PACKAGE_STRING='gprof 2.40'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1338,7 +1338,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gprof 2.40.00 to adapt to many kinds of systems.
 +\`configure' configures gprof 2.40 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1409,7 +1409,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gprof 2.40.00:";;
 +     short | recursive ) echo "Configuration of gprof 2.40:";;
    esac
   cat <<\_ACEOF
@@ -1520,7 +1520,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gprof configure 2.40.00
 +gprof configure 2.40
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1885,7 +1885,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gprof $as_me 2.40.00, which was
 +It was created by gprof $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -2864,7 +2864,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gprof'
 - VERSION='2.40.00'
 + VERSION='2.40'
 cat >>confdefs.h <<_ACEOF
@@ -12572,7 +12572,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gprof $as_me 2.40.00, which was
 +This file was extended by gprof $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -12638,7 +12638,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gprof config.status 2.40.00
 +gprof config.status 2.40
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gprofng/configure
 +++ b/gprofng/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gprofng 2.40.00.
 +# Generated by GNU Autoconf 2.69 for gprofng 2.40.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gprofng'
 PACKAGE_TARNAME='gprofng'
 -PACKAGE_VERSION='2.40.00'
 -PACKAGE_STRING='gprofng 2.40.00'
 +PACKAGE_VERSION='2.40'
 +PACKAGE_STRING='gprofng 2.40'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1362,7 +1362,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gprofng 2.40.00 to adapt to many kinds of systems.
 +\`configure' configures gprofng 2.40 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1433,7 +1433,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gprofng 2.40.00:";;
 +     short | recursive ) echo "Configuration of gprofng 2.40:";;
    esac
   cat <<\_ACEOF
@@ -1547,7 +1547,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gprofng configure 2.40.00
 +gprofng configure 2.40
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2079,7 +2079,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gprofng $as_me 2.40.00, which was
 +It was created by gprofng $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3052,7 +3052,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gprofng'
 - VERSION='2.40.00'
 + VERSION='2.40'
 cat >>confdefs.h <<_ACEOF
@@ -17467,7 +17467,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gprofng $as_me 2.40.00, which was
 +This file was extended by gprofng $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -17533,7 +17533,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gprofng config.status 2.40.00
 +gprofng config.status 2.40
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gprofng/doc/version.texi
 +++ b/gprofng/doc/version.texi
@@ -1,4 +1,4 @@
 @set UPDATED 5 January 2023
 @set UPDATED-MONTH January 2023
 -@set EDITION 2.40.00
 -@set VERSION 2.40.00
 +@set EDITION 2.40
 +@set VERSION 2.40
 --- a/gprofng/libcollector/configure
 +++ b/gprofng/libcollector/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gprofng 2.40.00.
 +# Generated by GNU Autoconf 2.69 for gprofng 2.40.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gprofng'
 PACKAGE_TARNAME='gprofng'
 -PACKAGE_VERSION='2.40.00'
 -PACKAGE_STRING='gprofng 2.40.00'
 +PACKAGE_VERSION='2.40'
 +PACKAGE_STRING='gprofng 2.40'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1325,7 +1325,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gprofng 2.40.00 to adapt to many kinds of systems.
 +\`configure' configures gprofng 2.40 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1396,7 +1396,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gprofng 2.40.00:";;
 +     short | recursive ) echo "Configuration of gprofng 2.40:";;
    esac
   cat <<\_ACEOF
@@ -1505,7 +1505,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gprofng configure 2.40.00
 +gprofng configure 2.40
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1991,7 +1991,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gprofng $as_me 2.40.00, which was
 +It was created by gprofng $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -2968,7 +2968,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gprofng'
 - VERSION='2.40.00'
 + VERSION='2.40'
 cat >>confdefs.h <<_ACEOF
@@ -16098,7 +16098,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gprofng $as_me 2.40.00, which was
 +This file was extended by gprofng $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -16164,7 +16164,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gprofng config.status 2.40.00
 +gprofng config.status 2.40
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/ld/configure
 +++ b/ld/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for ld 2.40.00.
 +# Generated by GNU Autoconf 2.69 for ld 2.40.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='ld'
 PACKAGE_TARNAME='ld'
 -PACKAGE_VERSION='2.40.00'
 -PACKAGE_STRING='ld 2.40.00'
 +PACKAGE_VERSION='2.40'
 +PACKAGE_STRING='ld 2.40'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1423,7 +1423,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures ld 2.40.00 to adapt to many kinds of systems.
 +\`configure' configures ld 2.40 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1494,7 +1494,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of ld 2.40.00:";;
 +     short | recursive ) echo "Configuration of ld 2.40:";;
    esac
   cat <<\_ACEOF
@@ -1661,7 +1661,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -ld configure 2.40.00
 +ld configure 2.40
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2376,7 +2376,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by ld $as_me 2.40.00, which was
 +It was created by ld $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3359,7 +3359,7 @@ fi
 # Define the identity of the package.
  PACKAGE='ld'
 - VERSION='2.40.00'
 + VERSION='2.40'
 cat >>confdefs.h <<_ACEOF
@@ -18083,7 +18083,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by ld $as_me 2.40.00, which was
 +This file was extended by ld $as_me 2.40, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -18149,7 +18149,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -ld config.status 2.40.00
 +ld config.status 2.40
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
--- a/toolchain/binutils/patches/2.40/010-toplevel-Makefile.def-add-install-strip-dependency-o.patch
+++ b/toolchain/binutils/patches/2.40/010-toplevel-Makefile.def-add-install-strip-dependency-o.patch
@@ -0,0 +1,60 @@
 From bcea253f5fa194e57f9564e8461c718e228bd26e Mon Sep 17 00:00:00 2001
 From: Indu Bhagat <indu.bhagat@oracle.com>
 Date: Wed, 18 Jan 2023 23:17:49 -0800
 Subject: [PATCH 10/50] toplevel: Makefile.def: add install-strip dependency on
 libsframe
 As noted in PR libsframe/30014 - FTBFS: install-strip fails because
 bfdlib relinks and fails to find libsframe, the install time
 dependencies of libbfd need to be updated.
 	PR libsframe/30014
 	* Makefile.def: Reflect that libsframe needs to installed before
 	libbfd.  Reorder a bit to better track libsframe dependencies.
 	* Makefile.in: Regenerate.
 (cherry picked from commit b8d21eb0cd10d6127e77cc437d82e949adb0c454)
 ---
 Makefile.def | 5 ++++-
 Makefile.in  | 3 ++-
 2 files changed, 6 insertions(+), 2 deletions(-)
 --- a/Makefile.def
 +++ b/Makefile.def
@@ -493,7 +493,6 @@ dependencies = { module=install-binutils
 dependencies = { module=install-strip-binutils; on=install-strip-opcodes; };
 // Likewise for ld, libctf, and bfd.
 -dependencies = { module=install-bfd; on=install-libsframe; };
 dependencies = { module=install-libctf; on=install-bfd; };
 dependencies = { module=install-ld; on=install-bfd; };
 dependencies = { module=install-ld; on=install-libctf; };
@@ -501,6 +500,10 @@ dependencies = { module=install-strip-li
 dependencies = { module=install-strip-ld; on=install-strip-bfd; };
 dependencies = { module=install-strip-ld; on=install-strip-libctf; };
 +// libbfd depends on libsframe
 +dependencies = { module=install-bfd; on=install-libsframe; };
 +dependencies = { module=install-strip-bfd; on=install-strip-libsframe; };
 +
 // libopcodes depends on libbfd
 dependencies = { module=configure-opcodes; on=configure-bfd; hard=true; };
 dependencies = { module=install-opcodes; on=install-bfd; };
 --- a/Makefile.in
 +++ b/Makefile.in
@@ -64549,13 +64549,14 @@ all-stageautoprofile-binutils: maybe-all
 all-stageautofeedback-binutils: maybe-all-stageautofeedback-libsframe
 install-binutils: maybe-install-opcodes
 install-strip-binutils: maybe-install-strip-opcodes
 -install-bfd: maybe-install-libsframe
 install-libctf: maybe-install-bfd
 install-ld: maybe-install-bfd
 install-ld: maybe-install-libctf
 install-strip-libctf: maybe-install-strip-bfd
 install-strip-ld: maybe-install-strip-bfd
 install-strip-ld: maybe-install-strip-libctf
 +install-bfd: maybe-install-libsframe
 +install-strip-bfd: maybe-install-strip-libsframe
 configure-opcodes: configure-bfd
 configure-stage1-opcodes: configure-stage1-bfd
 configure-stage2-opcodes: configure-stage2-bfd
--- a/toolchain/binutils/patches/2.40/018-gprofng-PR29521-docs-man-pages-are-not-in-the-releas.patch
+++ b/toolchain/binutils/patches/2.40/018-gprofng-PR29521-docs-man-pages-are-not-in-the-releas.patch
@@ -0,0 +1,703 @@
 From c6e269febbc946a54ed9dbbb2dc70feba6017607 Mon Sep 17 00:00:00 2001
 From: Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
 Date: Fri, 20 Jan 2023 15:39:55 -0800
 Subject: [PATCH 18/50] gprofng: PR29521 [docs] man pages are not in the
 release tarball
 gprofng/ChangeLog
 2023-01-20  Vladimir Mezentsev  <vladimir.mezentsev@oracle.com>
 	PR gprofng/29521
 	* configure.ac: Check if $MAKEINFO and $HELP2MAN are missing.
 	* Makefile.am: Build doc if $MAKEINFO exists.
 	* doc/gprofng.texi: Update documentation for gprofng.
 	* doc/Makefile.am: Build gprofng.1.
 	* src/Makefile.am: Move the build of gprofng.1 to doc/Makefile.am.
 	* configure: Rebuild.
 	* Makefile.in: Rebuild.
 	* doc/Makefile.in: Rebuild.
 	* src/Makefile.in: Rebuild.
 ---
 gprofng/Makefile.am      |   2 +-
 gprofng/Makefile.in      |   2 +-
 gprofng/configure        |  79 +++++++++++++++---
 gprofng/configure.ac     |  21 +++--
 gprofng/doc/Makefile.am  |  24 +++++-
 gprofng/doc/Makefile.in  |  93 ++++++++++++++++++---
 gprofng/doc/gprofng.texi | 169 +++++++++++++++++++++++++++++++++++++++
 gprofng/src/Makefile.am  |   8 +-
 gprofng/src/Makefile.in  |   8 +-
 9 files changed, 364 insertions(+), 42 deletions(-)
 --- a/gprofng/Makefile.am
 +++ b/gprofng/Makefile.am
@@ -23,7 +23,7 @@ AUTOMAKE_OPTIONS = dejagnu foreign
 if BUILD_COLLECTOR
     COLLECTOR_SUBDIRS = libcollector
 endif
 -if BUILD_MAN
 +if BUILD_DOC
     DOC_SUBDIR = doc
 endif
 if BUILD_SRC
 --- a/gprofng/Makefile.in
 +++ b/gprofng/Makefile.in
@@ -381,7 +381,7 @@ zlibinc = @zlibinc@
 ACLOCAL_AMFLAGS = -I . -I .. 
 AUTOMAKE_OPTIONS = dejagnu foreign
 @BUILD_COLLECTOR_TRUE@COLLECTOR_SUBDIRS = libcollector
 -@BUILD_MAN_TRUE@DOC_SUBDIR = doc
 +@BUILD_DOC_TRUE@DOC_SUBDIR = doc
 @BUILD_SRC_TRUE@SRC_SUBDIRS = src gp-display-html $(DOC_SUBDIR)
 SUBDIRS = $(COLLECTOR_SUBDIRS) $(SRC_SUBDIRS)
 DIST_SUBDIRS = libcollector src gp-display-html $(DOC_SUBDIR)
 --- a/gprofng/configure
 +++ b/gprofng/configure
@@ -639,6 +639,8 @@ GPROFNG_CPPFLAGS
 GPROFNG_NO_FORMAT_TRUNCATION_CFLAGS
 GPROFNG_CFLAGS
 LD_NO_AS_NEEDED
 +BUILD_DOC_FALSE
 +BUILD_DOC_TRUE
 BUILD_MAN_FALSE
 BUILD_MAN_TRUE
 HELP2MAN
@@ -12221,7 +12223,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
 -#line 12224 "configure"
 +#line 12226 "configure"
 #include "confdefs.h"
 #if HAVE_DLFCN_H
@@ -12327,7 +12329,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
 -#line 12330 "configure"
 +#line 12332 "configure"
 #include "confdefs.h"
 #if HAVE_DLFCN_H
@@ -16737,9 +16739,58 @@ fi
 # Generate manpages, if possible.
 build_man=false
 +build_doc=false
 if test $cross_compiling = no; then
 +  for ac_prog in help2man
 +do
 +  # Extract the first word of "$ac_prog", so it can be a program name with args.
 +set dummy $ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
 +if ${ac_cv_prog_HELP2MAN+:} false; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -n "$HELP2MAN"; then
 +  ac_cv_prog_HELP2MAN="$HELP2MAN" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
 +    ac_cv_prog_HELP2MAN="$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
 +HELP2MAN=$ac_cv_prog_HELP2MAN
 +if test -n "$HELP2MAN"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HELP2MAN" >&5
 +$as_echo "$HELP2MAN" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 -HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"}
 +
 +  test -n "$HELP2MAN" && break
 +done
 +test -n "$HELP2MAN" || HELP2MAN="$MISSING help2man"
 +
 +  case "x$HELP2MAN" in
 +    x | */missing\ help2man* )
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: gprofng: help2man is missing. Man pages will not be built." >&5
 +$as_echo "$as_me: WARNING: gprofng: help2man is missing. Man pages will not be built." >&2;}
 +      ;;
 +    * ) build_man=true ;;
 +    esac
   for ac_prog in makeinfo
 do
@@ -16782,10 +16833,10 @@ fi
   test -n "$MAKEINFO" && break
 done
 -test -n "$MAKEINFO" || MAKEINFO=""@echo makeinfo missing; true""
 +test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
 -  case "$MAKEINFO" in
 -    *true)
 +  case "x$MAKEINFO" in
 +    x | */missing\ makeinfo*)
       { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: gprofng: makeinfo is missing. Info documentation will not be built." >&5
 $as_echo "$as_me: WARNING: gprofng: makeinfo is missing. Info documentation will not be built." >&2;}
       ;;
@@ -16796,9 +16847,7 @@ $as_echo "$as_me: WARNING: gprofng: make
 $as_echo "$as_me: WARNING: gprofng: $MAKEINFO is too old. Info documentation will not be built." >&2;}
 	  MAKEINFO="@echo $MAKEINFO is too old, 6.5 or newer required; true"
 	  ;;
 -	x* )
 -	  build_man=true
 -	  ;;
 +	x* ) build_doc=true ;;
 	esac
       ;;
     esac
@@ -16812,6 +16861,14 @@ else
   BUILD_MAN_FALSE=
 fi
 + if test x$build_doc = xtrue; then
 +  BUILD_DOC_TRUE=
 +  BUILD_DOC_FALSE='#'
 +else
 +  BUILD_DOC_TRUE='#'
 +  BUILD_DOC_FALSE=
 +fi
 +
 LD_NO_AS_NEEDED=${no_as_needed}
@@ -17070,6 +17127,10 @@ if test -z "${BUILD_MAN_TRUE}" && test -
   as_fn_error $? "conditional \"BUILD_MAN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 +if test -z "${BUILD_DOC_TRUE}" && test -z "${BUILD_DOC_FALSE}"; then
 +  as_fn_error $? "conditional \"BUILD_DOC\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
 : "${CONFIG_STATUS=./config.status}"
 ac_write_fail=0
 --- a/gprofng/configure.ac
 +++ b/gprofng/configure.ac
@@ -210,11 +210,19 @@ AM_ZLIB
 # Generate manpages, if possible.
 build_man=false
 +build_doc=false
 if test $cross_compiling = no; then
 -  AM_MISSING_PROG(HELP2MAN, help2man)
 -  AC_CHECK_PROGS([MAKEINFO], makeinfo, ["@echo makeinfo missing; true"])
 -  case "$MAKEINFO" in
 -    *true)
 +  AC_CHECK_PROGS([HELP2MAN], help2man, [$MISSING help2man])
 +  case "x$HELP2MAN" in
 +    x | */missing\ help2man* )
 +      AC_MSG_WARN([gprofng: help2man is missing. Man pages will not be built.])
 +      ;;
 +    * ) build_man=true ;;
 +    esac
 +
 +  AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo])
 +  case "x$MAKEINFO" in
 +    x | */missing\ makeinfo*)
       AC_MSG_WARN([gprofng: makeinfo is missing. Info documentation will not be built.])
       ;;
     *)
@@ -223,15 +231,14 @@ if test $cross_compiling = no; then
 	  AC_MSG_WARN([gprofng: $MAKEINFO is too old. Info documentation will not be built.])
 	  MAKEINFO="@echo $MAKEINFO is too old, 6.5 or newer required; true"
 	  ;;
 -	x* )
 -	  build_man=true
 -	  ;;
 +	x* ) build_doc=true ;;
 	esac
       ;;
     esac
   AC_SUBST(MAKEINFO)
 fi
 AM_CONDITIONAL([BUILD_MAN], [test x$build_man = xtrue])
 +AM_CONDITIONAL([BUILD_DOC], [test x$build_doc = xtrue])
 AC_SUBST(LD_NO_AS_NEEDED, [${no_as_needed}])
 AC_SUBST(GPROFNG_CFLAGS, [${gprofng_cflags}])
 --- a/gprofng/doc/Makefile.am
 +++ b/gprofng/doc/Makefile.am
@@ -19,9 +19,31 @@
 AUTOMAKE_OPTIONS = info-in-builddir foreign no-texinfo.tex
 +# Options to extract the man page
 +MANCONF = -Dman
 +
 +TEXI2POD = perl $(srcdir)/../../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
 +POD2MAN = pod2man --center="User Commands" \
 +	--release="binutils-$(VERSION)" --section=1
 +
 info_TEXINFOS       = gprofng.texi
 gprofng_TEXINFOS    = fdl.texi
 TEXINFO_TEX         = .
 MAKEINFOHTML        = $(MAKEINFO) --html --no-split
 -MAINTAINERCLEANFILES = gprofng.info
 +man_MANS = gprofng.1
 +
 +# Build the man page from the texinfo file
 +# The sed command removes the no-adjust Nroff command so that
 +# the man output looks standard.
 +gprofng.1: $(srcdir)/gprofng.texi
 +	$(AM_V_GEN)touch $@
 +	$(AM_V_at)-$(TEXI2POD) $(MANCONF) < $(srcdir)/gprofng.texi > gprofng.pod
 +	$(AM_V_at)-($(POD2MAN) gprofng.pod | \
 +	  sed -e '/^.if n .na/d' > $@.tmp && \
 +	  mv -f $@.tmp $@) || (rm -f $@.tmp && exit 1)
 +	$(AM_V_at)rm -f gprofng.pod
 +
 +MAINTAINERCLEANFILES = gprofng.info $(man_MANS)
 +
 +info: $(man_MANS)
 --- a/gprofng/doc/Makefile.in
 +++ b/gprofng/doc/Makefile.in
@@ -182,7 +182,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
 -am__installdirs = "$(DESTDIR)$(infodir)"
 +am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -210,6 +210,9 @@ am__uninstall_files_from_dir = { \
     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
          $(am__cd) "$$dir" && rm -f $$files; }; \
   }
 +man1dir = $(mandir)/man1
 +NROFF = nroff
 +MANS = $(man_MANS)
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 am__DIST_COMMON = $(gprofng_TEXINFOS) $(srcdir)/Makefile.in \
 	$(top_srcdir)/../mkinstalldirs mdate-sh texinfo.tex
@@ -361,11 +364,19 @@ top_srcdir = @top_srcdir@
 zlibdir = @zlibdir@
 zlibinc = @zlibinc@
 AUTOMAKE_OPTIONS = info-in-builddir foreign no-texinfo.tex
 +
 +# Options to extract the man page
 +MANCONF = -Dman
 +TEXI2POD = perl $(srcdir)/../../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
 +POD2MAN = pod2man --center="User Commands" \
 +	--release="binutils-$(VERSION)" --section=1
 +
 info_TEXINFOS = gprofng.texi
 gprofng_TEXINFOS = fdl.texi
 TEXINFO_TEX = .
 MAKEINFOHTML = $(MAKEINFO) --html --no-split
 -MAINTAINERCLEANFILES = gprofng.info
 +man_MANS = gprofng.1
 +MAINTAINERCLEANFILES = gprofng.info $(man_MANS)
 all: all-am
 .SUFFIXES:
@@ -558,6 +569,49 @@ maintainer-clean-aminfo:
 	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 	done
 +install-man1: $(man_MANS)
 +	@$(NORMAL_INSTALL)
 +	@list1=''; \
 +	list2='$(man_MANS)'; \
 +	test -n "$(man1dir)" \
 +	  && test -n "`echo $$list1$$list2`" \
 +	  || exit 0; \
 +	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
 +	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
 +	{ for i in $$list1; do echo "$$i"; done;  \
 +	if test -n "$$list2"; then \
 +	  for i in $$list2; do echo "$$i"; done \
 +	    | sed -n '/\.1[a-z]*$$/p'; \
 +	fi; \
 +	} | while read p; do \
 +	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 +	  echo "$$d$$p"; echo "$$p"; \
 +	done | \
 +	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 +	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 +	sed 'N;N;s,\n, ,g' | { \
 +	list=; while read file base inst; do \
 +	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 +	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 +	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 +	  fi; \
 +	done; \
 +	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 +	while read files; do \
 +	  test -z "$$files" || { \
 +	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 +	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 +	done; }
 +
 +uninstall-man1:
 +	@$(NORMAL_UNINSTALL)
 +	@list=''; test -n "$(man1dir)" || exit 0; \
 +	files=`{ for i in $$list; do echo "$$i"; done; \
 +	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 +	  sed -n '/\.1[a-z]*$$/p'; \
 +	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 +	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 +	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 tags TAGS:
 ctags CTAGS:
@@ -600,9 +654,9 @@ distdir: $(DISTFILES)
 	  dist-info
 check-am: all-am
 check: check-am
 -all-am: Makefile $(INFO_DEPS)
 +all-am: Makefile $(INFO_DEPS) $(MANS)
 installdirs:
 -	for dir in "$(DESTDIR)$(infodir)"; do \
 +	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -652,11 +706,9 @@ html: html-am
 html-am: $(HTMLS)
 -info: info-am
 -
 info-am: $(INFO_DEPS)
 -install-data-am: install-info-am
 +install-data-am: install-info-am install-man
 install-dvi: install-dvi-am
@@ -739,7 +791,7 @@ install-info-am: $(INFO_DEPS)
 	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 	  done; \
 	else : ; fi
 -install-man:
 +install-man: install-man1
 install-pdf: install-pdf-am
@@ -794,7 +846,9 @@ ps: ps-am
 ps-am: $(PSS)
 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
 -	uninstall-pdf-am uninstall-ps-am
 +	uninstall-man uninstall-pdf-am uninstall-ps-am
 +
 +uninstall-man: uninstall-man1
 .MAKE: install-am install-strip
@@ -804,19 +858,32 @@ uninstall-am: uninstall-dvi-am uninstall
 	html-am info info-am install install-am install-data \
 	install-data-am install-dvi install-dvi-am install-exec \
 	install-exec-am install-html install-html-am install-info \
 -	install-info-am install-man install-pdf install-pdf-am \
 -	install-ps install-ps-am install-strip installcheck \
 -	installcheck-am installdirs maintainer-clean \
 +	install-info-am install-man install-man1 install-pdf \
 +	install-pdf-am install-ps install-ps-am install-strip \
 +	installcheck installcheck-am installdirs maintainer-clean \
 	maintainer-clean-aminfo maintainer-clean-generic \
 	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
 	mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
 	pdf-am ps ps-am tags-am uninstall uninstall-am \
 	uninstall-dvi-am uninstall-html-am uninstall-info-am \
 -	uninstall-pdf-am uninstall-ps-am
 +	uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
 .PRECIOUS: Makefile
 +# Build the man page from the texinfo file
 +# The sed command removes the no-adjust Nroff command so that
 +# the man output looks standard.
 +gprofng.1: $(srcdir)/gprofng.texi
 +	$(AM_V_GEN)touch $@
 +	$(AM_V_at)-$(TEXI2POD) $(MANCONF) < $(srcdir)/gprofng.texi > gprofng.pod
 +	$(AM_V_at)-($(POD2MAN) gprofng.pod | \
 +	  sed -e '/^.if n .na/d' > $@.tmp && \
 +	  mv -f $@.tmp $@) || (rm -f $@.tmp && exit 1)
 +	$(AM_V_at)rm -f gprofng.pod
 +
 +info: $(man_MANS)
 +
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
 --- a/gprofng/doc/gprofng.texi
 +++ b/gprofng/doc/gprofng.texi
@@ -1,5 +1,8 @@
 \input texinfo @c -*-texinfo-*-
 +@c for $sect (qw(NAME SYNOPSIS TARGET DESCRIPTION OPTIONS ENVIRONMENT FILES
 +@c               BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) {
 +
 @c ----------------------------------------------------------------------------
 @c This is the Texinfo source file for the GPROFNG manual.
 @c
@@ -59,6 +62,10 @@ gprofng
 @cindex \label\, \string\
 @end macro
 +@macro gcctabopt{body}
 +@code{\body\}
 +@end macro
 +
 @c -- Get the version information ---------------------------------------------
 @include version.texi
@@ -99,6 +106,20 @@ section entitled ``GNU Free Documentatio
 @page
 @vskip 0pt plus 1filll
 @insertcopying
 +
 +@c man begin COPYRIGHT
 +
 +Copyright @copyright{} 2022-2023 Free Software Foundation, Inc.
 +
 +Permission is granted to copy, distribute and/or modify this document
 +under the terms of the GNU Free Documentation License, Version 1.3
 +or any later version published by the Free Software Foundation;
 +with no Invariant Sections, with no Front-Cover Texts, and with no
 +Back-Cover Texts.  A copy of the license is included in the
 +section entitled ``GNU Free Documentation License''.
 +
 +@c man end
 +
 @end titlepage
 @c -- Generate the Table of Contents ------------------------------------------
@@ -163,6 +184,154 @@ Terminology
 @end menu
 @end ifinfo
 +@ifset man
 +
 +@c man title gprofng the driver for the gprofng tool suite
 +
 +@c man begin SYNOPSIS
 +gprofng [OPTION(S)] ACTION [@b{QUALIFIER}] [ARGUMENTS] TARGET
 +@c man end
 +
 +@c man begin DESCRIPTION
 +This is the driver for the GPROFNG tools suite to gather and analyze performance data.
 +
 +The driver executes the action specified. An example of an action is @code{collect}
 +to collect performance data. Depending on the action, a qualifier may be needed to
 +define the command. Several qualifiers support options. The last item on the command
 +is the target the command applies to.
 +
 +For example, to collect performance data for an application called @code{a.out} and
 +store the results in experiment directory @code{mydata.er}, the following command may
 +be used:
 +
 +@smallexample
 +$ gprofng collect app -o mydata.er a.out
 +@end smallexample
 +
 +In this example, the action is @code{collect}, the qualifier is @code{app}, the single
 +argument is @code{-o mydata.er} and the target is @code{a.out}.
 +
 +If gprofng is executed without any additional option, action, or target, a usage
 +overview is printed.
 +
 +@c man end
 +
 +@c man begin OPTIONS
 +
 +@table @gcctabopt
 +
 +@item @var{--version}
 +print the version number and exit.
 +
 +@item @var{--help}
 +print usage information and exit.
 +
 +@end table
 +
 +@c man end
 +
 +@c man begin NOTES
 +
 +The gprofng driver supports the following commands.
 +
 +@c The man pages for the commands below can be viewed using the command name with "gprofng" replaced by "gp" and the spaces replaced by a dash ("-"). For example the man page
 +@c        name for "gprofng collect app" is "gp-collect-app".
 +
 +Collect performance data:
 +
 +@table @code
 +
 +@item gprofng collect app
 +collect application performance data.
 +
 +@end table
 +
 +Display the performance results:
 +
 +@table @code
 +
 +@item gprofng display text
 +display the performance data in ASCII format.
 +
 +@item gprofng display html
 +generate an HTML file from one or more experiments.
 +
 +@end table
 +
 +Miscellaneous commands:
 +
 +@table @code
 +
 +@item gprofng display src
 +display source or disassembly with compiler annotations.
 +
 +@item gprofng archive
 +include binaries and source code in an experiment directory.
 +
 +@end table
 +
 +It is also possible to invoke the lower level commands directly, but since
 +these are subject to change, in particular the options, we recommend to
 +use the driver.
 +
 +@c man end
 +
 +@c man begin ENVIRONMENT
 +The following environment variables are supported:
 +
 +@table @code
 +
 +@item @env{GPROFNG_MAX_CALL_STACK_DEPTH}
 +set the depth of the call stack (default is 256).
 +
 +@item @env{GPROFNG_USE_JAVA_OPTIONS}
 +may be set when profiling a C/C++ application that uses dlopen() to execute Java code.
 +
 +@item @env{GPROFNG_SSH_REMOTE_DISPLAY}
 +use this variable to define the ssh command executed by the remote display tool.
 +
 +@item @env{GPROFNG_SKIP_VALIDATION}
 +set this variable to disable checking hardware, system, and Java versions.
 +
 +@item @env{GPROFNG_ALLOW_CORE_DUMP}
 +set this variable to allow a core file to be generated; otherwise an error report is created on /tmp.
 +
 +@item @env{GPROFNG_ARCHIVE}
 +use this variable to define the settings for automatic archiving upon experiment recording completion.
 +
 +@item @env{GPROFNG_ARCHIVE_COMMON_DIR}
 +set this variable to the location of the common archive.
 +
 +@item @env{GPROFNG_JAVA_MAX_CALL_STACK_DEPTH}
 +set the depth of the Java call stack; the default is 256; set to 0 to disable capturing of call stacks.
 +
 +@item @env{GPROFNG_JAVA_NATIVE_MAX_CALL_STACK_DEPTH}
 +set the depth of the Java native call stack; the default is 256; set to 0 to disable capturing of call stacks (JNI and assembly call stacks are not captured).
 +
 +@end table
 +
 +@c man end
 +
 +@c man begin SEEALSO
 +The man pages for the various gprofng commands are not available yet, but
 +the @option{--help} option supported on each of the commands lists the options
 +and provides more information.
 +
 +For example this displays the options supported on the @command{gprofng collect app}
 +command:
 +
 +@smallexample
 +$ gprofng collect app --help
 +@end smallexample
 +
 +The user guide is available as an Info entry for @file{gprofng}.
 +@c man end
 +
 +@end ifset
 +
 +@c man begin DESCRIPTION
 +@c man end
 +
 @c -- A new node --------------------------------------------------------------
 @node    Introduction
 @chapter Introduction
 --- a/gprofng/src/Makefile.am
 +++ b/gprofng/src/Makefile.am
@@ -160,7 +160,7 @@ gp_display_text_LDADD = $(LIBGPROFNG) $(
 if BUILD_MAN
 -man_MANS = gprofng.1 \
 +man_MANS = \
 	gp-archive.1 \
 	gp-collect-app.1 \
 	gp-display-src.1 \
@@ -191,10 +191,6 @@ H2M_FILTER = | sed 's/\.TP/\.TP\n.B/' |
   | sed 's/See also:/\.SH SEE ALSO/' | sed 's/Documentation:/.SH DOCUMENTATION/' \
   | sed 's/Limitations:/.SH LIMITATIONS/'
 -gprofng.1: $(srcdir)/gprofng.cc $(common_mandeps) | ./gprofng$(EXEEXT)
 -	$(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \
 -	  --name=$(TEXT_GPROFNG) ./gprofng$(EXEEXT) $(H2M_FILTER) > $@
 -
 gp-archive.1: $(srcdir)/gp-archive.cc $(common_mandeps) | ./gp-archive$(EXEEXT)
 	$(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \
 	  --name=$(TEXT_GP_ARCHIVE) ./gp-archive$(EXEEXT) $(H2M_FILTER) > $@
@@ -223,3 +219,5 @@ dist-hook: $(LIBGPROFNG)
 install-data-local: install-pkglibLTLIBRARIES
 	rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a
 +
 +$(srcdir)/DbeSession.cc: QLParser.tab.hh
 --- a/gprofng/src/Makefile.in
 +++ b/gprofng/src/Makefile.in
@@ -572,7 +572,7 @@ gp_display_src_SOURCES = gp-display-src.
 gp_display_src_LDADD = $(LIBGPROFNG) $(CLOCK_GETTIME_LINK) $(ZLIB)
 gp_display_text_SOURCES = gp-display-text.cc ipc.cc ipcio.cc
 gp_display_text_LDADD = $(LIBGPROFNG) $(CLOCK_GETTIME_LINK) $(ZLIB)
 -@BUILD_MAN_TRUE@man_MANS = gprofng.1 \
 +@BUILD_MAN_TRUE@man_MANS = \
 @BUILD_MAN_TRUE@	gp-archive.1 \
 @BUILD_MAN_TRUE@	gp-collect-app.1 \
 @BUILD_MAN_TRUE@	gp-display-src.1 \
@@ -1176,10 +1176,6 @@ uninstall-man: uninstall-man1
 QLParser.tab.cc QLParser.tab.hh: QLParser.yy
 	$(BISON) $^
 -@BUILD_MAN_TRUE@gprofng.1: $(srcdir)/gprofng.cc $(common_mandeps) | ./gprofng$(EXEEXT)
 -@BUILD_MAN_TRUE@	$(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \
 -@BUILD_MAN_TRUE@	  --name=$(TEXT_GPROFNG) ./gprofng$(EXEEXT) $(H2M_FILTER) > $@
 -
 @BUILD_MAN_TRUE@gp-archive.1: $(srcdir)/gp-archive.cc $(common_mandeps) | ./gp-archive$(EXEEXT)
 @BUILD_MAN_TRUE@	$(AM_V_GEN)_BUILDING_MANPAGE=1 $(HELP2MAN) $(HELP2MAN_OPT) \
 @BUILD_MAN_TRUE@	  --name=$(TEXT_GP_ARCHIVE) ./gp-archive$(EXEEXT) $(H2M_FILTER) > $@
@@ -1207,6 +1203,8 @@ dist-hook: $(LIBGPROFNG)
 install-data-local: install-pkglibLTLIBRARIES
 	rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a
 +$(srcdir)/DbeSession.cc: QLParser.tab.hh
 +
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- a/toolchain/binutils/patches/2.40/020-gprofng-PR30043-libgprofng.so.-are-installed-to-a-wr.patch
+++ b/toolchain/binutils/patches/2.40/020-gprofng-PR30043-libgprofng.so.-are-installed-to-a-wr.patch
@@ -0,0 +1,212 @@
 From edd36b26f3506eeb259534ba2493e15c728cd280 Mon Sep 17 00:00:00 2001
 From: Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
 Date: Wed, 25 Jan 2023 19:21:38 -0800
 Subject: [PATCH 20/50] gprofng: PR30043 libgprofng.so.* are installed to a
 wrong location
 gprofng/ChangeLog
 2023-01-25  Vladimir Mezentsev  <vladimir.mezentsev@oracle.com>
 	PR gprofng/30043
 	PR gprofng/28972
 	* src/Makefile.am: Use lib_LTLIBRARIES instead of pkglib_LTLIBRARIES.
 	* src/Makefile.in: Rebuild.
 ---
 gprofng/src/Makefile.am |  7 +---
 gprofng/src/Makefile.in | 76 +++++++++++++++++++----------------------
 2 files changed, 37 insertions(+), 46 deletions(-)
 --- a/gprofng/src/Makefile.am
 +++ b/gprofng/src/Makefile.am
@@ -124,7 +124,7 @@ BUILT_SOURCES = QLParser.tab.hh
 EXTRA_DIST = QLParser.yy $(man_MANS)
 -pkglib_LTLIBRARIES = $(LIBGPROFNG)
 +lib_LTLIBRARIES = $(LIBGPROFNG)
 libgprofng_la_SOURCES = $(CCSOURCES) $(CSOURCES)
 libgprofng_la_LDFLAGS = -version-info 0:0:0
@@ -215,9 +215,4 @@ endif
 # so ensure that the necessary libraries are built at dist time.
 dist-hook: $(LIBGPROFNG)
 -.PHONY: install-data-local
 -
 -install-data-local: install-pkglibLTLIBRARIES
 -	rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a
 -
 $(srcdir)/DbeSession.cc: QLParser.tab.hh
 --- a/gprofng/src/Makefile.in
 +++ b/gprofng/src/Makefile.in
@@ -155,9 +155,9 @@ am__uninstall_files_from_dir = { \
     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
          $(am__cd) "$$dir" && rm -f $$files; }; \
   }
 -am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" \
 +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
 	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(dbedir)"
 -LTLIBRARIES = $(pkglib_LTLIBRARIES)
 +LTLIBRARIES = $(lib_LTLIBRARIES)
 am__DEPENDENCIES_1 =
 libgprofng_la_DEPENDENCIES = $(top_builddir)/../opcodes/libopcodes.la \
 	$(top_builddir)/../bfd/libbfd.la $(am__DEPENDENCIES_1)
@@ -548,7 +548,7 @@ AM_CFLAGS = $(GPROFNG_CFLAGS) $(PTHREAD_
 AM_CXXFLAGS = $(AM_CFLAGS)
 BUILT_SOURCES = QLParser.tab.hh
 EXTRA_DIST = QLParser.yy $(man_MANS)
 -pkglib_LTLIBRARIES = $(LIBGPROFNG)
 +lib_LTLIBRARIES = $(LIBGPROFNG)
 libgprofng_la_SOURCES = $(CCSOURCES) $(CSOURCES)
 libgprofng_la_LDFLAGS = -version-info 0:0:0
@@ -636,33 +636,33 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 -install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
 +install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 -	@list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
 +	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 	list2=; for p in $$list; do \
 	  if test -f $$p; then \
 	    list2="$$list2 $$p"; \
 	  else :; fi; \
 	done; \
 	test -z "$$list2" || { \
 -	  echo " $(MKDIR_P) '$(DESTDIR)$(pkglibdir)'"; \
 -	  $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" || exit 1; \
 -	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \
 -	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \
 +	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
 +	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
 +	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
 +	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
 	}
 -uninstall-pkglibLTLIBRARIES:
 +uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
 -	@list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
 +	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 	for p in $$list; do \
 	  $(am__strip_dir) \
 -	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
 -	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
 +	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
 +	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 	done
 -clean-pkglibLTLIBRARIES:
 -	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
 -	@list='$(pkglib_LTLIBRARIES)'; \
 +clean-libLTLIBRARIES:
 +	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
 +	@list='$(lib_LTLIBRARIES)'; \
 	locs=`for p in $$list; do echo $$p; done | \
 	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
 	      sort -u`; \
@@ -672,7 +672,7 @@ clean-pkglibLTLIBRARIES:
 	}
 libgprofng.la: $(libgprofng_la_OBJECTS) $(libgprofng_la_DEPENDENCIES) $(EXTRA_libgprofng_la_DEPENDENCIES) 
 -	$(AM_V_CXXLD)$(libgprofng_la_LINK) -rpath $(pkglibdir) $(libgprofng_la_OBJECTS) $(libgprofng_la_LIBADD) $(LIBS)
 +	$(AM_V_CXXLD)$(libgprofng_la_LINK) -rpath $(libdir) $(libgprofng_la_OBJECTS) $(libgprofng_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
@@ -1039,8 +1039,10 @@ check-am: all-am
 check: $(BUILT_SOURCES)
 	$(MAKE) $(AM_MAKEFLAGS) check-am
 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(DATA)
 +install-binPROGRAMS: install-libLTLIBRARIES
 +
 installdirs:
 -	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(dbedir)"; do \
 +	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(dbedir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: $(BUILT_SOURCES)
@@ -1078,8 +1080,8 @@ maintainer-clean-generic:
 	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-am
 -clean-am: clean-binPROGRAMS clean-generic clean-libtool \
 -	clean-pkglibLTLIBRARIES mostlyclean-am
 +clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
 +	clean-libtool mostlyclean-am
 distclean: distclean-am
 	-rm -rf ./$(DEPDIR)
@@ -1099,13 +1101,13 @@ info: info-am
 info-am:
 -install-data-am: install-data-local install-dbeDATA install-man
 +install-data-am: install-dbeDATA install-man
 install-dvi: install-dvi-am
 install-dvi-am:
 -install-exec-am: install-binPROGRAMS install-pkglibLTLIBRARIES
 +install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
 install-html: install-html-am
@@ -1145,30 +1147,29 @@ ps: ps-am
 ps-am:
 -uninstall-am: uninstall-binPROGRAMS uninstall-dbeDATA uninstall-man \
 -	uninstall-pkglibLTLIBRARIES
 +uninstall-am: uninstall-binPROGRAMS uninstall-dbeDATA \
 +	uninstall-libLTLIBRARIES uninstall-man
 uninstall-man: uninstall-man1
 .MAKE: all check install install-am install-strip
 .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
 -	clean-binPROGRAMS clean-generic clean-libtool \
 -	clean-pkglibLTLIBRARIES cscopelist-am ctags ctags-am dist-hook \
 -	distclean distclean-compile distclean-generic \
 -	distclean-libtool distclean-tags distdir dvi dvi-am html \
 -	html-am info info-am install install-am install-binPROGRAMS \
 -	install-data install-data-am install-data-local \
 -	install-dbeDATA install-dvi install-dvi-am install-exec \
 -	install-exec-am install-html install-html-am install-info \
 -	install-info-am install-man install-man1 install-pdf \
 -	install-pdf-am install-pkglibLTLIBRARIES install-ps \
 +	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
 +	clean-libtool cscopelist-am ctags ctags-am dist-hook distclean \
 +	distclean-compile distclean-generic distclean-libtool \
 +	distclean-tags distdir dvi dvi-am html html-am info info-am \
 +	install install-am install-binPROGRAMS install-data \
 +	install-data-am install-dbeDATA install-dvi install-dvi-am \
 +	install-exec install-exec-am install-html install-html-am \
 +	install-info install-info-am install-libLTLIBRARIES \
 +	install-man install-man1 install-pdf install-pdf-am install-ps \
 	install-ps-am install-strip installcheck installcheck-am \
 	installdirs maintainer-clean maintainer-clean-generic \
 	mostlyclean mostlyclean-compile mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
 	uninstall-am uninstall-binPROGRAMS uninstall-dbeDATA \
 -	uninstall-man uninstall-man1 uninstall-pkglibLTLIBRARIES
 +	uninstall-libLTLIBRARIES uninstall-man uninstall-man1
 .PRECIOUS: Makefile
@@ -1198,11 +1199,6 @@ QLParser.tab.cc QLParser.tab.hh: QLParse
 # so ensure that the necessary libraries are built at dist time.
 dist-hook: $(LIBGPROFNG)
 -.PHONY: install-data-local
 -
 -install-data-local: install-pkglibLTLIBRARIES
 -	rm -f $(DESTDIR)/$(pkglibdir)/*.la $(DESTDIR)/$(pkglibdir)/*.a
 -
 $(srcdir)/DbeSession.cc: QLParser.tab.hh
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
--- a/toolchain/binutils/patches/2.40/026-RISC-V-make-C-extension-JAL-available-again-for-32-b.patch
+++ b/toolchain/binutils/patches/2.40/026-RISC-V-make-C-extension-JAL-available-again-for-32-b.patch
@@ -0,0 +1,115 @@
 From 27f59ec47a18277b6ea3548f405263ef558f5217 Mon Sep 17 00:00:00 2001
 From: Jan Beulich <jbeulich@suse.com>
 Date: Tue, 31 Jan 2023 09:47:22 +0100
 Subject: [PATCH 26/50] RISC-V: make C-extension JAL available again for
 (32-bit) assembly
 Along with the normal JAL alias, the C-extension one should have been
 moved as well by 839189bc932e ("RISC-V: re-arrange opcode table for
 consistent alias handling"), for the assembler to actually be able to
 use it where/when possible.
 Since neither this nor any other compressed branch insn was being tested
 so far, take the opportunity and introduce a new testcase covering those.
 ---
 gas/config/tc-riscv.c                 |  3 +++
 gas/testsuite/gas/riscv/c-branch-na.d | 20 ++++++++++++++++++++
 gas/testsuite/gas/riscv/c-branch.d    | 19 +++++++++++++++++++
 gas/testsuite/gas/riscv/c-branch.s    | 11 +++++++++++
 opcodes/riscv-opc.c                   |  2 +-
 5 files changed, 54 insertions(+), 1 deletion(-)
 create mode 100644 gas/testsuite/gas/riscv/c-branch-na.d
 create mode 100644 gas/testsuite/gas/riscv/c-branch.d
 create mode 100644 gas/testsuite/gas/riscv/c-branch.s
 --- a/gas/config/tc-riscv.c
 +++ b/gas/config/tc-riscv.c
@@ -2762,6 +2762,8 @@ riscv_ip (char *str, struct riscv_cl_ins
 		case 'p':
 		  goto branch;
 		case 'a':
 +		  if (oparg == insn->args + 1)
 +		    goto jump_check_gpr;
 		  goto jump;
 		case 'S': /* Floating-point RS1 x8-x15.  */
 		  if (!reg_lookup (&asarg, RCLASS_FPR, &regno)
@@ -3271,6 +3273,7 @@ riscv_ip (char *str, struct riscv_cl_ins
 		 but the 2nd (with 2 operands) might.  */
 	      if (oparg == insn->args)
 		{
 +	    jump_check_gpr:
 		  asargStart = asarg;
 		  if (reg_lookup (&asarg, RCLASS_GPR, NULL)
 		      && (*asarg == ',' || (ISSPACE (*asarg) && asarg[1] == ',')))
 --- /dev/null
 +++ b/gas/testsuite/gas/riscv/c-branch-na.d
@@ -0,0 +1,20 @@
 +#as: -march=rv32ic
 +#source: c-branch.s
 +#objdump: -drw -Mno-aliases
 +
 +.*:[ 	]+file format .*
 +
 +
 +Disassembly of section .text:
 +
 +0+ <target>:
 +[ 	]+[0-9a-f]+:[ 	]+c001[ 	]+c\.beqz[ 	]+s0,0 <target>[ 	]+0: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+dcfd[ 	]+c\.beqz[ 	]+s1,0 <target>[ 	]+2: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+fc75[ 	]+c\.bnez[ 	]+s0,0 <target>[ 	]+4: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+fced[ 	]+c\.bnez[ 	]+s1,0 <target>[ 	]+6: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+bfe5[ 	]+c\.j[ 	]+0 <target>[ 	]+8: R_RISCV_RVC_JUMP	.*
 +[ 	]+[0-9a-f]+:[ 	]+3fdd[ 	]+c\.jal[ 	]+0 <target>[ 	]+a: R_RISCV_RVC_JUMP	.*
 +[ 	]+[0-9a-f]+:[ 	]+9302[ 	]+c\.jalr[ 	]+t1
 +[ 	]+[0-9a-f]+:[ 	]+8382[ 	]+c\.jr[ 	]+t2
 +[ 	]+[0-9a-f]+:[ 	]+8082[ 	]+c\.jr[ 	]+ra
 +#...
 --- /dev/null
 +++ b/gas/testsuite/gas/riscv/c-branch.d
@@ -0,0 +1,19 @@
 +#as: -march=rv64ic
 +#objdump: -drw
 +
 +.*:[ 	]+file format .*
 +
 +
 +Disassembly of section .text:
 +
 +0+ <target>:
 +[ 	]+[0-9a-f]+:[ 	]+c001[ 	]+beqz[ 	]+s0,0 <target>[ 	]+0: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+dcfd[ 	]+beqz[ 	]+s1,0 <target>[ 	]+2: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+fc75[ 	]+bnez[ 	]+s0,0 <target>[ 	]+4: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+fced[ 	]+bnez[ 	]+s1,0 <target>[ 	]+6: R_RISCV_RVC_BRANCH	.*
 +[ 	]+[0-9a-f]+:[ 	]+bfe5[ 	]+j[ 	]+0 <target>[ 	]+8: R_RISCV_RVC_JUMP	.*
 +[ 	]+[0-9a-f]+:[ 	]+ff7ff0ef[ 	]+jal[ 	]+0 <target>[ 	]+a: R_RISCV_JAL	.*
 +[ 	]+[0-9a-f]+:[ 	]+9302[ 	]+jalr[ 	]+t1
 +[ 	]+[0-9a-f]+:[ 	]+8382[ 	]+jr[ 	]+t2
 +[ 	]+[0-9a-f]+:[ 	]+8082[ 	]+ret
 +#...
 --- /dev/null
 +++ b/gas/testsuite/gas/riscv/c-branch.s
@@ -0,0 +1,11 @@
 +	.text
 +target:
 +	beq	x8, x0, target
 +	beqz	x9, target
 +	bne	x8, x0, target
 +	bnez	x9, target
 +	j	target
 +	jal	target
 +	jalr	x6
 +	jr	x7
 +	ret
 --- a/opcodes/riscv-opc.c
 +++ b/opcodes/riscv-opc.c
@@ -340,9 +340,9 @@ const struct riscv_opcode riscv_opcodes[
 {"jalr",        0, INSN_CLASS_I, "d,s,j",     MATCH_JALR, MASK_JALR, match_opcode, INSN_JSR },
 {"j",           0, INSN_CLASS_C, "Ca",        MATCH_C_J, MASK_C_J, match_opcode, INSN_ALIAS|INSN_BRANCH },
 {"j",           0, INSN_CLASS_I, "a",         MATCH_JAL, MASK_JAL|MASK_RD, match_opcode, INSN_ALIAS|INSN_BRANCH },
 +{"jal",        32, INSN_CLASS_C, "Ca",        MATCH_C_JAL, MASK_C_JAL, match_opcode, INSN_ALIAS|INSN_JSR },
 {"jal",         0, INSN_CLASS_I, "a",         MATCH_JAL|(X_RA << OP_SH_RD), MASK_JAL|MASK_RD, match_opcode, INSN_ALIAS|INSN_JSR },
 {"jal",         0, INSN_CLASS_I, "d,a",       MATCH_JAL, MASK_JAL, match_opcode, INSN_JSR },
 -{"jal",        32, INSN_CLASS_C, "Ca",        MATCH_C_JAL, MASK_C_JAL, match_opcode, INSN_ALIAS|INSN_JSR },
 {"call",        0, INSN_CLASS_I, "d,c",       (X_T1 << OP_SH_RS1), (int) M_CALL, match_never, INSN_MACRO },
 {"call",        0, INSN_CLASS_I, "c",         (X_RA << OP_SH_RS1)|(X_RA << OP_SH_RD), (int) M_CALL, match_never, INSN_MACRO },
 {"tail",        0, INSN_CLASS_I, "c",         (X_T1 << OP_SH_RS1), (int) M_CALL, match_never, INSN_MACRO },
--- a/toolchain/binutils/patches/2.40/034-bpf-fix-error-conversion-from-long-unsigned-int-to-u.patch
+++ b/toolchain/binutils/patches/2.40/034-bpf-fix-error-conversion-from-long-unsigned-int-to-u.patch
@@ -0,0 +1,209 @@
 From 3e888977f165594cf44dbe8f67e3a4960b22c11f Mon Sep 17 00:00:00 2001
 From: "Guillermo E. Martinez" <guillermo.e.martinez@oracle.com>
 Date: Fri, 3 Feb 2023 11:17:49 -0600
 Subject: [PATCH 34/50] bpf: fix error conversion from long unsigned int to
 unsigned int [-Werror=overflow]
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
 Regenerating BPF target using the maintainer mode emits:
 .../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow]
  57 |   64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 The use of a narrow size to handle the mask CGEN in instruction format
 is causing this error.  Additionally eBPF `call' instructions
 constructed by expressions using symbols (BPF_PSEUDO_CALL) emits
 annotations in `src' field of the instruction, used to identify BPF
 target endianness.
 cpu/
 	* bpf.cpu (define-call-insn): Remove `src' field from
 	instruction mask.
 include/
 	*opcode/cge.h (CGEN_IFMT): Adjust mask bit width.
 opcodes/
 	* bpf-opc.c: Regenerate.
 (cherry picked from commit 7f6ebecd56e690012b05af0a492280765b17f186)
 ---
 cpu/bpf.cpu           |  2 +-
 include/opcode/cgen.h |  2 +-
 opcodes/bpf-opc.c     | 54 +++++++++++++++++++++++--------------------
 opcodes/cgen-dis.c    |  2 +-
 4 files changed, 32 insertions(+), 28 deletions(-)
 --- a/cpu/bpf.cpu
 +++ b/cpu/bpf.cpu
@@ -768,7 +768,7 @@
        "call"
        (endian-isas x-endian)
        "call $disp32"
 -       (+ disp32 (f-offset16 0) (f-regs 0)
 +       (+ disp32 (f-offset16 0) (.sym src x-endian) ((.sym f-dst x-endian) 0)
           OP_CLASS_JMP OP_SRC_K OP_CODE_CALL)
        (c-call VOID
                "bpfbf_call" disp32 (ifield (.sym f-src x-endian)))
 --- a/include/opcode/cgen.h
 +++ b/include/opcode/cgen.h
@@ -914,7 +914,7 @@ typedef struct
      Each insn's value is stored with the insn.
      The first step in recognizing an insn for disassembly is
      (opcode & mask) == value.  */
 -  CGEN_INSN_INT mask;
 +  CGEN_INSN_LGUINT mask;
 #define CGEN_IFMT_MASK(ifmt) ((ifmt)->mask)
   /* Instruction fields.
 --- a/opcodes/bpf-opc.c
 +++ b/opcodes/bpf-opc.c
@@ -50,99 +50,103 @@ static const CGEN_IFMT ifmt_empty ATTRIB
 };
 static const CGEN_IFMT ifmt_addile ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_addrle ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_negle ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xfffffffffffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_addibe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_addrbe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_negbe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffffffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_endlele ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_endlebe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_lddwle ATTRIBUTE_UNUSED = {
 -  64, 128, 0xff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 128, 0xfffff0ff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_lddwbe ATTRIBUTE_UNUSED = {
 -  64, 128, 0xff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 128, 0xffff0fff, { { F (F_IMM64) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_ldabsw ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_ldindwle ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_ldindwbe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_ldxwle ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_ldxwbe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_stble ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xf0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_DSTLE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_stbbe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xfff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_MODE) }, { F (F_OP_SIZE) }, { F (F_SRCBE) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_jeqile ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xf0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_jeqrle ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_jeqibe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xfff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_jeqrbe ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffff000000ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_callle ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffff0fff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +};
 +
 +static const CGEN_IFMT ifmt_callbe ATTRIBUTE_UNUSED = {
 +  64, 64, 0xfffff0ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_DSTBE) }, { F (F_OP_CODE) }, { F (F_SRCBE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_ja ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffff0000ffff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 static const CGEN_IFMT ifmt_exit ATTRIBUTE_UNUSED = {
 -  64, 64, 0xff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 +  64, 64, 0xffffffffffffffff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_REGS) }, { F (F_OP_CODE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
 };
 #undef F
@@ -1646,7 +1650,7 @@ static const CGEN_OPCODE bpf_cgen_insn_o
   {
     { 0, 0, 0, 0 },
     { { MNEM, ' ', OP (DISP32), 0 } },
 -    & ifmt_callle, { 0x85 }
 +    & ifmt_callbe, { 0x85 }
   },
 /* call $dstle */
   {
 --- a/opcodes/cgen-dis.c
 +++ b/opcodes/cgen-dis.c
@@ -39,7 +39,7 @@ static void		 add_insn_to_hash_chain (CG
 static int
 count_decodable_bits (const CGEN_INSN *insn)
 {
 -  unsigned mask = CGEN_INSN_BASE_MASK (insn);
 +  CGEN_INSN_LGUINT mask = CGEN_INSN_BASE_MASK (insn);
 #if GCC_VERSION >= 3004
   return __builtin_popcount (mask);
 #else
--- a/toolchain/binutils/patches/2.40/035-Pass-JANSSON_LIBS-and-ZSTD_LIBS-to-ld-bootstrap-boot.patch
+++ b/toolchain/binutils/patches/2.40/035-Pass-JANSSON_LIBS-and-ZSTD_LIBS-to-ld-bootstrap-boot.patch
@@ -0,0 +1,50 @@
 From e1815414077347097e5bf0d75162add955e241d9 Mon Sep 17 00:00:00 2001
 From: Romain Geissler <romain.geissler@amadeus.com>
 Date: Sun, 5 Feb 2023 13:56:34 +0000
 Subject: [PATCH 35/50] Pass $JANSSON_LIBS and $ZSTD_LIBS to
 ld-bootstrap/bootrap.exp
 ---
 ld/Makefile.am                          | 1 +
 ld/Makefile.in                          | 1 +
 ld/testsuite/ld-bootstrap/bootstrap.exp | 4 ++--
 3 files changed, 4 insertions(+), 2 deletions(-)
 --- a/ld/Makefile.am
 +++ b/ld/Makefile.am
@@ -992,6 +992,7 @@ check-DEJAGNU: site.exp
 		CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
 		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" CTFLIB="$(TESTCTFLIB) $(ZLIB)" \
 		SFRAMELIB="$(TESTSFRAMELIB)" \
 +		JANSSON_LIBS="$(JANSSON_LIBS)" ZSTD_LIBS="$(ZSTD_LIBS)" \
 		LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \
 		DO_COMPARE="`echo '$(do_compare)' | sed -e 's,\\$$,,g'`" \
 		$(RUNTESTFLAGS); \
 --- a/ld/Makefile.in
 +++ b/ld/Makefile.in
@@ -2645,6 +2645,7 @@ check-DEJAGNU: site.exp
 		CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
 		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" CTFLIB="$(TESTCTFLIB) $(ZLIB)" \
 		SFRAMELIB="$(TESTSFRAMELIB)" \
 +		JANSSON_LIBS="$(JANSSON_LIBS)" ZSTD_LIBS="$(ZSTD_LIBS)" \
 		LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \
 		DO_COMPARE="`echo '$(do_compare)' | sed -e 's,\\$$,,g'`" \
 		$(RUNTESTFLAGS); \
 --- a/ld/testsuite/ld-bootstrap/bootstrap.exp
 +++ b/ld/testsuite/ld-bootstrap/bootstrap.exp
@@ -162,13 +162,13 @@ foreach flags $test_flags {
     }
     if { [lindex [remote_exec build grep "-q \"HAVE_ZSTD 1\" config.h" ] 0] == 0 } then {
 -	set extralibs "$extralibs -lzstd"
 +	set extralibs "$extralibs $ZSTD_LIBS"
     }
     # Check if the system's jansson library is used. If so, the object files will
     # be using symbols from it, so link to it.
     if { [lindex [remote_exec build grep "-q \"HAVE_JANSSON 1\" config.h" ] 0] == 0 } then {
 -	set extralibs "$extralibs -ljansson"
 +	set extralibs "$extralibs $JANSSON_LIBS"
     }
     # Plugin support requires linking with libdl.
--- a/toolchain/binutils/patches/2.40/036-Regen-config-files.patch
+++ b/toolchain/binutils/patches/2.40/036-Regen-config-files.patch
@@ -0,0 +1,714 @@
 From 1fc096a4c590f28e0efb1823cdca653f2db9de74 Mon Sep 17 00:00:00 2001
 From: Alan Modra <amodra@gmail.com>
 Date: Mon, 6 Feb 2023 10:48:59 +1030
 Subject: [PATCH 36/50] Regen config files
 For the version update to 2.40.0
 ---
 bfd/configure                  | 20 ++++++++++----------
 binutils/configure             | 20 ++++++++++----------
 gas/configure                  | 20 ++++++++++----------
 gprof/configure                | 20 ++++++++++----------
 gprofng/configure              | 20 ++++++++++----------
 gprofng/doc/version.texi       |  8 ++++----
 gprofng/libcollector/configure | 20 ++++++++++----------
 intl/configure                 |  3 +++
 ld/configure                   | 20 ++++++++++----------
 opcodes/configure              | 20 ++++++++++----------
 10 files changed, 87 insertions(+), 84 deletions(-)
 --- a/bfd/configure
 +++ b/bfd/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for bfd 2.40.
 +# Generated by GNU Autoconf 2.69 for bfd 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='bfd'
 PACKAGE_TARNAME='bfd'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='bfd 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='bfd 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1400,7 +1400,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures bfd 2.40 to adapt to many kinds of systems.
 +\`configure' configures bfd 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1471,7 +1471,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of bfd 2.40:";;
 +     short | recursive ) echo "Configuration of bfd 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1608,7 +1608,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -bfd configure 2.40
 +bfd configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2202,7 +2202,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by bfd $as_me 2.40, which was
 +It was created by bfd $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3184,7 +3184,7 @@ fi
 # Define the identity of the package.
  PACKAGE='bfd'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -15906,7 +15906,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by bfd $as_me 2.40, which was
 +This file was extended by bfd $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -15972,7 +15972,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -bfd config.status 2.40
 +bfd config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/binutils/configure
 +++ b/binutils/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for binutils 2.40.
 +# Generated by GNU Autoconf 2.69 for binutils 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='binutils'
 PACKAGE_TARNAME='binutils'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='binutils 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='binutils 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1401,7 +1401,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures binutils 2.40 to adapt to many kinds of systems.
 +\`configure' configures binutils 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1472,7 +1472,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of binutils 2.40:";;
 +     short | recursive ) echo "Configuration of binutils 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1631,7 +1631,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -binutils configure 2.40
 +binutils configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2099,7 +2099,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by binutils $as_me 2.40, which was
 +It was created by binutils $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3081,7 +3081,7 @@ fi
 # Define the identity of the package.
  PACKAGE='binutils'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -15326,7 +15326,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by binutils $as_me 2.40, which was
 +This file was extended by binutils $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -15392,7 +15392,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -binutils config.status 2.40
 +binutils config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gas/configure
 +++ b/gas/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gas 2.40.
 +# Generated by GNU Autoconf 2.69 for gas 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gas'
 PACKAGE_TARNAME='gas'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='gas 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='gas 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1381,7 +1381,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gas 2.40 to adapt to many kinds of systems.
 +\`configure' configures gas 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1452,7 +1452,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gas 2.40:";;
 +     short | recursive ) echo "Configuration of gas 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1600,7 +1600,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gas configure 2.40
 +gas configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2011,7 +2011,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gas $as_me 2.40, which was
 +It was created by gas $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -2990,7 +2990,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gas'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -14910,7 +14910,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gas $as_me 2.40, which was
 +This file was extended by gas $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -14976,7 +14976,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gas config.status 2.40
 +gas config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gprof/configure
 +++ b/gprof/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gprof 2.40.
 +# Generated by GNU Autoconf 2.69 for gprof 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gprof'
 PACKAGE_TARNAME='gprof'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='gprof 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='gprof 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1338,7 +1338,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gprof 2.40 to adapt to many kinds of systems.
 +\`configure' configures gprof 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1409,7 +1409,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gprof 2.40:";;
 +     short | recursive ) echo "Configuration of gprof 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1520,7 +1520,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gprof configure 2.40
 +gprof configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1885,7 +1885,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gprof $as_me 2.40, which was
 +It was created by gprof $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -2864,7 +2864,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gprof'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -12572,7 +12572,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gprof $as_me 2.40, which was
 +This file was extended by gprof $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -12638,7 +12638,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gprof config.status 2.40
 +gprof config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gprofng/configure
 +++ b/gprofng/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gprofng 2.40.
 +# Generated by GNU Autoconf 2.69 for gprofng 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gprofng'
 PACKAGE_TARNAME='gprofng'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='gprofng 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='gprofng 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1364,7 +1364,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gprofng 2.40 to adapt to many kinds of systems.
 +\`configure' configures gprofng 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1435,7 +1435,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gprofng 2.40:";;
 +     short | recursive ) echo "Configuration of gprofng 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1549,7 +1549,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gprofng configure 2.40
 +gprofng configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2081,7 +2081,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gprofng $as_me 2.40, which was
 +It was created by gprofng $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3054,7 +3054,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gprofng'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -17528,7 +17528,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gprofng $as_me 2.40, which was
 +This file was extended by gprofng $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -17594,7 +17594,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gprofng config.status 2.40
 +gprofng config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/gprofng/doc/version.texi
 +++ b/gprofng/doc/version.texi
@@ -1,4 +1,4 @@
 -@set UPDATED 5 January 2023
 -@set UPDATED-MONTH January 2023
 -@set EDITION 2.40
 -@set VERSION 2.40
 +@set UPDATED 1 February 2023
 +@set UPDATED-MONTH February 2023
 +@set EDITION 2.40.0
 +@set VERSION 2.40.0
 --- a/gprofng/libcollector/configure
 +++ b/gprofng/libcollector/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for gprofng 2.40.
 +# Generated by GNU Autoconf 2.69 for gprofng 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='gprofng'
 PACKAGE_TARNAME='gprofng'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='gprofng 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='gprofng 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1325,7 +1325,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures gprofng 2.40 to adapt to many kinds of systems.
 +\`configure' configures gprofng 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1396,7 +1396,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of gprofng 2.40:";;
 +     short | recursive ) echo "Configuration of gprofng 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1505,7 +1505,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -gprofng configure 2.40
 +gprofng configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1991,7 +1991,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by gprofng $as_me 2.40, which was
 +It was created by gprofng $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -2968,7 +2968,7 @@ fi
 # Define the identity of the package.
  PACKAGE='gprofng'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -16098,7 +16098,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by gprofng $as_me 2.40, which was
 +This file was extended by gprofng $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -16164,7 +16164,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -gprofng config.status 2.40
 +gprofng config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/intl/configure
 +++ b/intl/configure
@@ -6857,6 +6857,9 @@ case "${host}" in
 	# sets the default TLS model and affects inlining.
 	PICFLAG=-fPIC
 	;;
 +    loongarch*-*-*)
 +	PICFLAG=-fpic
 +	;;
     mips-sgi-irix6*)
 	# PIC is the default.
 	;;
 --- a/ld/configure
 +++ b/ld/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for ld 2.40.
 +# Generated by GNU Autoconf 2.69 for ld 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='ld'
 PACKAGE_TARNAME='ld'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='ld 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='ld 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1423,7 +1423,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures ld 2.40 to adapt to many kinds of systems.
 +\`configure' configures ld 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1494,7 +1494,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of ld 2.40:";;
 +     short | recursive ) echo "Configuration of ld 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1661,7 +1661,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -ld configure 2.40
 +ld configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2376,7 +2376,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by ld $as_me 2.40, which was
 +It was created by ld $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3359,7 +3359,7 @@ fi
 # Define the identity of the package.
  PACKAGE='ld'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -18083,7 +18083,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by ld $as_me 2.40, which was
 +This file was extended by ld $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -18149,7 +18149,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -ld config.status 2.40
 +ld config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 --- a/opcodes/configure
 +++ b/opcodes/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
 -# Generated by GNU Autoconf 2.69 for opcodes 2.40.
 +# Generated by GNU Autoconf 2.69 for opcodes 2.40.0.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='opcodes'
 PACKAGE_TARNAME='opcodes'
 -PACKAGE_VERSION='2.40'
 -PACKAGE_STRING='opcodes 2.40'
 +PACKAGE_VERSION='2.40.0'
 +PACKAGE_STRING='opcodes 2.40.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
@@ -1360,7 +1360,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
 -\`configure' configures opcodes 2.40 to adapt to many kinds of systems.
 +\`configure' configures opcodes 2.40.0 to adapt to many kinds of systems.
 Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1431,7 +1431,7 @@ fi
 if test -n "$ac_init_help"; then
   case $ac_init_help in
 -     short | recursive ) echo "Configuration of opcodes 2.40:";;
 +     short | recursive ) echo "Configuration of opcodes 2.40.0:";;
    esac
   cat <<\_ACEOF
@@ -1545,7 +1545,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 -opcodes configure 2.40
 +opcodes configure 2.40.0
 generated by GNU Autoconf 2.69
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2139,7 +2139,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 -It was created by opcodes $as_me 2.40, which was
 +It was created by opcodes $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   $ $0 $@
@@ -3118,7 +3118,7 @@ fi
 # Define the identity of the package.
  PACKAGE='opcodes'
 - VERSION='2.40'
 + VERSION='2.40.0'
 cat >>confdefs.h <<_ACEOF
@@ -13191,7 +13191,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_wri
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 -This file was extended by opcodes $as_me 2.40, which was
 +This file was extended by opcodes $as_me 2.40.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
   CONFIG_FILES    = $CONFIG_FILES
@@ -13257,7 +13257,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 -opcodes config.status 2.40
 +opcodes config.status 2.40.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
--- a/toolchain/binutils/patches/2.40/040-configure-remove-dependencies-on-gmp-and-mpfr-when-g.patch
+++ b/toolchain/binutils/patches/2.40/040-configure-remove-dependencies-on-gmp-and-mpfr-when-g.patch
@@ -0,0 +1,51 @@
 From 17294931e3e361bee6810b1a39493e214b38c5e5 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Cl=C3=A9ment=20Chigot?= <chigot@adacore.com>
 Date: Tue, 3 Jan 2023 14:24:43 +0100
 Subject: [PATCH 40/50] configure: remove dependencies on gmp and mpfr when gdb
 is disabled
 Since 991180627851801f1999d1ebbc0e569a17e47c74, the configure checks
 about GMP and MPFR for gdb builds have been moved to the toplevel
 configure.
 However, it doesn't take into account the --disable-gdb option. Meaning
 that a build without gdb will require these libraries even if not
 needed.
 ChangeLog:
 	* configure.ac: Skip GMP and MPFR when --disable-gdb is
 	provided.
 	* configure: Regenerate.
 (cherry picked from commit 5fb0e308577143ceb313fde5538dc9ecb038f29f)
 ---
 configure    | 4 +++-
 configure.ac | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)
 --- a/configure
 +++ b/configure
@@ -8032,7 +8032,9 @@ if test -d ${srcdir}/gcc ; then
   require_mpc=yes
 fi
 if test -d ${srcdir}/gdb ; then
 -  require_gmp=yes
 +  if test "x$enable_gdb" != xno; then
 +   require_gmp=yes
 +  fi
 fi
 gmplibs="-lmpfr -lgmp"
 --- a/configure.ac
 +++ b/configure.ac
@@ -1585,7 +1585,9 @@ if test -d ${srcdir}/gcc ; then
   require_mpc=yes
 fi
 if test -d ${srcdir}/gdb ; then
 -  require_gmp=yes
 +  if test "x$enable_gdb" != xno; then
 +   require_gmp=yes
 +  fi
 fi
 gmplibs="-lmpfr -lgmp"
--- a/toolchain/binutils/patches/2.40/046-gas-correct-symbol-name-comparison-in-.startof.-.siz.patch
+++ b/toolchain/binutils/patches/2.40/046-gas-correct-symbol-name-comparison-in-.startof.-.siz.patch
@@ -0,0 +1,46 @@
 From b2bc62b7b4e7638c3a249d2d2728ceb4d5f2b22c Mon Sep 17 00:00:00 2001
 From: Jan Beulich <jbeulich@suse.com>
 Date: Tue, 14 Feb 2023 08:35:02 +0100
 Subject: [PATCH 46/50] gas: correct symbol name comparison in
 .startof./.sizeof. handling
 In 162c6aef1f3a ("gas: fold symbol table entries generated for
 .startof.() / .sizeof.()") I screwed up quite badly, inverting the case
 sensitive and case insensitive comparison functions.
 ---
 gas/expr.c                      | 4 ++--
 gas/testsuite/gas/elf/startof.d | 2 ++
 gas/testsuite/gas/elf/startof.s | 3 +++
 3 files changed, 7 insertions(+), 2 deletions(-)
 --- a/gas/expr.c
 +++ b/gas/expr.c
@@ -149,8 +149,8 @@ symbol_lookup_or_make (const char *name,
     name = S_GET_NAME (symbolP);
     if ((symbols_case_sensitive
 -	 ? strcasecmp (buf, name)
 -	 : strcmp (buf, name)) == 0)
 +	 ? strcmp (buf, name)
 +	 : strcasecmp (buf, name)) == 0)
       {
 	free (buf);
 	return symbolP;
 --- a/gas/testsuite/gas/elf/startof.d
 +++ b/gas/testsuite/gas/elf/startof.d
@@ -7,4 +7,6 @@ Symbol table .*
 #...
      [1-8]: 0+ .* UND \.startof\.\.text
      [2-9]: 0+ .* UND \.sizeof\.\.text
 + +[1-9][0-9]*: 0+ .* UND \.startof\.\.Text
 + +[1-9][0-9]*: 0+ .* UND \.sizeof\.\.TEXT
 #pass
 --- a/gas/testsuite/gas/elf/startof.s
 +++ b/gas/testsuite/gas/elf/startof.s
@@ -4,3 +4,6 @@
 	.dc.a	0
 	.dc.a	.sizeof.(.text)
 	.dc.a	.startof.(.text)
 +	.dc.a	0
 +	.dc.a	.startof.(.Text)
 +	.dc.a	.sizeof.(.TEXT)