kernel: add support for 3.8-rc2

Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35055
2013-01-08 22:19:31 +00:00
parent c38cb63808
commit 8dbed04ec9
150 changed files with 29125 additions and 1 deletions
--- a/target/linux/generic/patches-3.8/726-phy_rtl8366.patch
+++ b/target/linux/generic/patches-3.8/726-phy_rtl8366.patch
@@ -0,0 +1,45 @@
+--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
+@@ -215,6 +215,30 @@ config MDIO_BUS_MUX_MMIOREG
+ 
+ 	  Currently, only 8-bit registers are supported.
+ 
+config RTL8366_SMI
+	tristate "Driver for the RTL8366 SMI interface"
+	depends on GENERIC_GPIO
+	---help---
+	  This module implements the SMI interface protocol which is used
+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366_SMI_DEBUG_FS
+	bool "RTL8366 SMI interface debugfs support"
+        depends on DEBUG_FS
+        default n
+
+config RTL8366S_PHY
+	tristate "Driver for the Realtek RTL8366S switch"
+	select SWCONFIG
+
+config RTL8366RB_PHY
+	tristate "Driver for the Realtek RTL8366RB switch"
+	select SWCONFIG
+
+endif # RTL8366_SMI
+
+ endif # PHYLIB
+ 
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
+@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
+obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o