gemini: add 3.18 support
Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 45033
This commit is contained in:
Felix Fietkau
243
target/linux/gemini/patches-3.18/160-gemini-timers.patch
Normal file
243
target/linux/gemini/patches-3.18/160-gemini-timers.patch
Normal file
@@ -0,0 +1,243 @@
|
||||
--- a/arch/arm/mach-gemini/time.c 2015-03-25 23:06:03.188317455 +0200
|
||||
+++ b/arch/arm/mach-gemini/time.c 2015-03-25 23:06:24.417315486 +0200
|
||||
@@ -15,15 +15,18 @@
|
||||
#include <asm/mach/time.h>
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/clocksource.h>
|
||||
+#include <linux/sched_clock.h>
|
||||
|
||||
/*
|
||||
* Register definitions for the timers
|
||||
*/
|
||||
-#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00)
|
||||
-#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04)
|
||||
-#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08)
|
||||
-#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C)
|
||||
-#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30)
|
||||
+#define TIMER_COUNT(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x00)
|
||||
+#define TIMER_LOAD(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x04)
|
||||
+#define TIMER_MATCH1(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x08)
|
||||
+#define TIMER_MATCH2(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x0C)
|
||||
+#define TIMER_CR(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x30)
|
||||
+#define TIMER_INTR_STATE(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x34)
|
||||
+#define TIMER_INTR_MASK(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x38)
|
||||
|
||||
#define TIMER_1_CR_ENABLE (1 << 0)
|
||||
#define TIMER_1_CR_CLOCK (1 << 1)
|
||||
@@ -34,27 +37,38 @@
|
||||
#define TIMER_3_CR_ENABLE (1 << 6)
|
||||
#define TIMER_3_CR_CLOCK (1 << 7)
|
||||
#define TIMER_3_CR_INT (1 << 8)
|
||||
+#define TIMER_1_CR_UPDOWN (1 << 9)
|
||||
+#define TIMER_2_CR_UPDOWN (1 << 10)
|
||||
+#define TIMER_3_CR_UPDOWN (1 << 11)
|
||||
+
|
||||
+#define TIMER_1_INT_MATCH1 (1 << 0)
|
||||
+#define TIMER_1_INT_MATCH2 (1 << 1)
|
||||
+#define TIMER_1_INT_OVERFLOW (1 << 2)
|
||||
+#define TIMER_2_INT_MATCH1 (1 << 3)
|
||||
+#define TIMER_2_INT_MATCH2 (1 << 4)
|
||||
+#define TIMER_2_INT_OVERFLOW (1 << 5)
|
||||
+#define TIMER_3_INT_MATCH1 (1 << 6)
|
||||
+#define TIMER_3_INT_MATCH2 (1 << 7)
|
||||
+#define TIMER_3_INT_OVERFLOW (1 << 8)
|
||||
+#define TIMER_INT_ALL_MASK 0x1ff
|
||||
|
||||
static unsigned int tick_rate;
|
||||
|
||||
+static u64 notrace gemini_read_sched_clock(void)
|
||||
+{
|
||||
+ return readl(TIMER_COUNT(GEMINI_TIMER3_BASE));
|
||||
+}
|
||||
+
|
||||
static int gemini_timer_set_next_event(unsigned long cycles,
|
||||
struct clock_event_device *evt)
|
||||
{
|
||||
u32 cr;
|
||||
|
||||
- cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
-
|
||||
- /* This may be overdoing it, feel free to test without this */
|
||||
- cr &= ~TIMER_2_CR_ENABLE;
|
||||
- cr &= ~TIMER_2_CR_INT;
|
||||
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
-
|
||||
- /* Set next event */
|
||||
- writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
||||
- writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
||||
- cr |= TIMER_2_CR_ENABLE;
|
||||
- cr |= TIMER_2_CR_INT;
|
||||
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
+ /* Setup the match register */
|
||||
+ cr = readl(TIMER_COUNT(GEMINI_TIMER1_BASE));
|
||||
+ writel(cr + cycles, TIMER_MATCH1(GEMINI_TIMER1_BASE));
|
||||
+ if (readl(TIMER_COUNT(GEMINI_TIMER1_BASE)) - cr > cycles)
|
||||
+ return -ETIME;
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -66,48 +80,68 @@
|
||||
u32 cr;
|
||||
|
||||
switch (mode) {
|
||||
- case CLOCK_EVT_MODE_PERIODIC:
|
||||
- /* Start the timer */
|
||||
- writel(period,
|
||||
- TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
||||
- writel(period,
|
||||
- TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
||||
- cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
- cr |= TIMER_2_CR_ENABLE;
|
||||
- cr |= TIMER_2_CR_INT;
|
||||
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
+ case CLOCK_EVT_MODE_PERIODIC:
|
||||
+ /* Stop timer and interrupt. */
|
||||
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+ cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
|
||||
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+
|
||||
+ /* Setup timer to fire at 1/HZ intervals. */
|
||||
+ cr = 0xffffffff - (period - 1);
|
||||
+ writel(cr, TIMER_COUNT(GEMINI_TIMER1_BASE));
|
||||
+ writel(cr, TIMER_LOAD(GEMINI_TIMER1_BASE));
|
||||
+
|
||||
+ /* enable interrupt on overflaw */
|
||||
+ cr = readl(TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
||||
+ cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
|
||||
+ cr |= TIMER_1_INT_OVERFLOW;
|
||||
+ writel(cr, TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
||||
+
|
||||
+ /* start the timer */
|
||||
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+ cr |= TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
|
||||
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
||||
break;
|
||||
+
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
case CLOCK_EVT_MODE_UNUSED:
|
||||
- case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
+ /* Stop timer and interrupt. */
|
||||
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+ cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
|
||||
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+
|
||||
+ /* Setup counter start from 0 */
|
||||
+ writel(0, TIMER_COUNT(GEMINI_TIMER1_BASE));
|
||||
+ writel(0, TIMER_LOAD(GEMINI_TIMER1_BASE));
|
||||
+
|
||||
+ /* enable interrupt */
|
||||
+ cr = readl(TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
||||
+ cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
|
||||
+ cr |= TIMER_1_INT_MATCH1;
|
||||
+ writel(cr, TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
||||
+
|
||||
+ /* start the timer */
|
||||
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+ cr |= TIMER_1_CR_ENABLE;
|
||||
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
||||
+ break;
|
||||
+
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
- /*
|
||||
- * Disable also for oneshot: the set_next() call will
|
||||
- * arm the timer instead.
|
||||
- */
|
||||
- cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
- cr &= ~TIMER_2_CR_ENABLE;
|
||||
- cr &= ~TIMER_2_CR_INT;
|
||||
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
break;
|
||||
- default:
|
||||
- break;
|
||||
}
|
||||
}
|
||||
|
||||
-/* Use TIMER2 as clock event */
|
||||
static struct clock_event_device gemini_clockevent = {
|
||||
- .name = "TIMER2",
|
||||
- .rating = 300, /* Reasonably fast and accurate clock event */
|
||||
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
||||
- .set_next_event = gemini_timer_set_next_event,
|
||||
- .set_mode = gemini_timer_set_mode,
|
||||
+ .name = "gemini_timer_1",
|
||||
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
||||
+ .shift = 32,
|
||||
+ .rating = 300,
|
||||
+ .set_next_event = gemini_timer_set_next_event,
|
||||
+ .set_mode = gemini_timer_set_mode,
|
||||
};
|
||||
|
||||
-/*
|
||||
- * IRQ handler for the timer
|
||||
- */
|
||||
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
|
||||
+static irqreturn_t gemini_timer_intr(int irq, void *dev_id)
|
||||
{
|
||||
struct clock_event_device *evt = &gemini_clockevent;
|
||||
|
||||
@@ -116,14 +150,11 @@
|
||||
}
|
||||
|
||||
static struct irqaction gemini_timer_irq = {
|
||||
- .name = "Gemini Timer Tick",
|
||||
- .flags = IRQF_TIMER,
|
||||
- .handler = gemini_timer_interrupt,
|
||||
+ .name = "gemini timer 1",
|
||||
+ .flags = IRQF_DISABLED | IRQF_TIMER,
|
||||
+ .handler = gemini_timer_intr,
|
||||
};
|
||||
|
||||
-/*
|
||||
- * Set up timer interrupt, and return the current time in seconds.
|
||||
- */
|
||||
void __init gemini_timer_init(void)
|
||||
{
|
||||
u32 reg_v;
|
||||
@@ -151,20 +182,35 @@
|
||||
}
|
||||
|
||||
/*
|
||||
- * Make irqs happen for the system timer
|
||||
+ * Reset the interrupt mask and status
|
||||
*/
|
||||
- setup_irq(IRQ_TIMER2, &gemini_timer_irq);
|
||||
+ writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
||||
+ writel(0, TIMER_INTR_STATE(GEMINI_TIMER_BASE));
|
||||
+ writel(TIMER_1_CR_UPDOWN | TIMER_3_CR_ENABLE | TIMER_3_CR_UPDOWN,
|
||||
+ TIMER_CR(GEMINI_TIMER_BASE));
|
||||
|
||||
- /* Enable and use TIMER1 as clock source */
|
||||
- writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
|
||||
- writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
|
||||
- writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
||||
- if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
|
||||
- "TIMER1", tick_rate, 300, 32,
|
||||
- clocksource_mmio_readl_up))
|
||||
- pr_err("timer: failed to initialize gemini clock source\n");
|
||||
+ /*
|
||||
+ * Setup free-running clocksource timer (interrupts
|
||||
+ * disabled.)
|
||||
+ */
|
||||
+ writel(0, TIMER_COUNT(GEMINI_TIMER3_BASE));
|
||||
+ writel(0, TIMER_LOAD(GEMINI_TIMER3_BASE));
|
||||
+ writel(0, TIMER_MATCH1(GEMINI_TIMER3_BASE));
|
||||
+ writel(0, TIMER_MATCH2(GEMINI_TIMER3_BASE));
|
||||
+ clocksource_mmio_init(TIMER_COUNT(GEMINI_TIMER3_BASE),
|
||||
+ "gemini_clocksource", tick_rate,
|
||||
+ 300, 32, clocksource_mmio_readl_up);
|
||||
+ sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
|
||||
|
||||
- /* Configure and register the clockevent */
|
||||
+ /*
|
||||
+ * Setup clockevent timer (interrupt-driven.)
|
||||
+ */
|
||||
+ writel(0, TIMER_COUNT(GEMINI_TIMER1_BASE));
|
||||
+ writel(0, TIMER_LOAD(GEMINI_TIMER1_BASE));
|
||||
+ writel(0, TIMER_MATCH1(GEMINI_TIMER1_BASE));
|
||||
+ writel(0, TIMER_MATCH2(GEMINI_TIMER1_BASE));
|
||||
+ setup_irq(IRQ_TIMER1, &gemini_timer_irq);
|
||||
+ gemini_clockevent.cpumask = cpumask_of(0);
|
||||
clockevents_config_and_register(&gemini_clockevent, tick_rate,
|
||||
1, 0xffffffff);
|
||||
}
|
||||
Reference in New Issue
Block a user