ramips: Archer C50 cleanup

- setting read-only flag to important partitions
- enabling PA to improve 2.4 GHz signal strength
- add missing leds
- rename colour led
- add mac adress to 5GHz wlan interface
- included <dt-bindings/input/input.h> and <dt-bindings/gpio/gpio.h>

Signed-off-by: Henryk Heisig hyniu@o2.pl

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -88,11 +88,12 @@ c20i)
 	ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
 	;;
 c50)
-	ucidef_set_led_default "power" "power" "$board:blue:power" "0"
-	ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" "eth0.2"
-	set_usb_led "$board:blue:usb"
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "$board:blue:wlan2g" "phy1radio"
-	ucidef_set_led_wlan "wlan5g" "wlan5g" "$board:blue:wlan5g" "phy0radio"
+	ucidef_set_led_default "power" "power" "$board:green:power" "0"
+	ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
+	ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+	set_usb_led "$board:green:usb"
+	ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1
+	set_wifi_led "$board:green:wlan5g"
 	;;
 cf-wr800n)
 	ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1

target/linux/ramips/base-files/etc/diag.sh

@@ -19,6 +19,7 @@ get_status_led() {
 	asl26555|\
 	br-6425|\
 	br-6475nd|\
+	c50|\
 	dch-m225|\
 	dir-860l-b1|\
 	e1700|\
@@ -91,9 +92,6 @@ get_status_led() {
 	wrh-300cr)
 		status_led="$board:green:wps"
 		;;
-	c50)
-		status_led="tp-link:blue:power"
-		;;
 	cf-wr800n|\
 	psg1208)
 		status_led="$board:white:wps"