kernel: bump 5.10 to 5.10.30

Deleted (reverse-applicable):
mvebu/patches-5.10/101-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch

Automatically refreshed:
bcm63xx/patches-5.10/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch
generic/backport-5.10/610-v5.13-02-netfilter-Fix-fall-through-warnings-for-Clang.patch
generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch
generic/hack-5.10/204-module_strip.patch
generic/hack-5.10/902-debloat_proc.patch
generic/pending-5.10/203-kallsyms_uncompressed.patch
generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
generic/pending-5.10/920-mangle_bootargs.patch
mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch
mediatek/patches-5.10/602-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch
mediatek/patches-5.10/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch
ramips/patches-5.10/323-mt7621-memory-detect.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

target/linux/mvebu/patches-5.10/101-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch

@@ -1,64 +0,0 @@
-From: "Marek Behún" <kabel@kernel.org>
-To: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: "Marek Behún" <kabel@kernel.org>, Rui Salvaterra <rsalvaterra@gmail.com>, "Uwe Kleine-König" <uwe@kleine-koenig.org>, linux-arm-kernel@lists.infradead.org, Andrew Lunn <andrew@lunn.ch>, stable@vger.kernel.org
-Subject: [PATCH mvebu-dt] ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
-Date: Sun, 21 Feb 2021 00:11:44 +0100
-Message-Id: <20210220231144.32325-1-kabel@kernel.org>
-X-Mailer: git-send-email 2.26.2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
-of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.
-
-Without this the pin is by default in LED[2] mode, and the Marvell PHY
-driver configures LED[2] into "On - Link, Blink - Activity" mode.
-
-This fixes the issue where the pca9538 GPIO/interrupt controller (which
-can't mask interrupts in HW) received too many interrupts and after a
-time started ignoring the interrupt with error message:
-  IRQ 71: nobody cared
-
-There is a work in progress to have the Marvell PHY driver support
-parsing PHY LED nodes from OF and registering the LEDs as Linux LED
-class devices. Once this is done the PHY driver can also automatically
-set the pin into INTn mode if it does not find LED[2] in OF.
-
-Until then, though, we fix this via `marvell,reg-init` DT property.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: <stable@vger.kernel.org>
-
----
-
-This patch fixes bug introduced with the commit that added Turris
-Omnia's DTS (26ca8b52d6e1), but will not apply cleanly because there is
-commit 8ee4a5f4f40d which changed node name and node compatible
-property and this commit did not go into stable.
-
-So either commit 8ee4a5f4f40d has also to go into stable before this, or
-this patch has to be fixed a little in order to apply to 4.14+.
-
-Please let me know how should I handle this.
-
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -254,6 +254,7 @@
- 		status = "okay";
- 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
- 		reg = <1>;
-+		marvell,reg-init = <3 18 0 0x4985>;
- 
- 		/* irq is connected to &pcawan pin 7 */
- 	};