add preliminary support for Storm SL3512 based devices, not ready yet
SVN-Revision: 10956
This commit is contained in:
Imre Kaloz
@@ -48,6 +48,9 @@ endif
|
||||
ifeq ($(ARCH),powerpc)
|
||||
HAL_TARGET:=powerpc-be-elf
|
||||
endif
|
||||
ifeq ($(BOARD),storm)
|
||||
HAL_TARGET:=armv4-le-elf
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_TARGET_atheros),)
|
||||
BUS:=AHB
|
||||
|
||||
28
target/linux/storm/Makefile
Normal file
28
target/linux/storm/Makefile
Normal file
@@ -0,0 +1,28 @@
|
||||
#
|
||||
# Copyright (C) 2006-2008 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
ARCH:=arm
|
||||
BOARD:=storm
|
||||
BOARDNAME:=Storm SL3512
|
||||
FEATURES:=squashfs pci broken
|
||||
|
||||
LINUX_VERSION:=2.6.23.16
|
||||
|
||||
include $(INCLUDE_DIR)/target.mk
|
||||
|
||||
define Target/Description
|
||||
Build images for boards based on the Storm Semiconductor SL3512, eg. Wiligear WBD-111
|
||||
endef
|
||||
|
||||
define Kernel/Configure
|
||||
$(call Kernel/Configure/Default)
|
||||
$(SED) 's,.*CONFIG_AEABI.*,$(if $(CONFIG_EABI_SUPPORT),CONFIG_AEABI=y,# CONFIG_AEABI is not set),' $(LINUX_DIR)/.config
|
||||
$(if $(CONFIG_EABI_SUPPORT),echo '# CONFIG_OABI_COMPAT is not set' >> $(LINUX_DIR)/.config)
|
||||
endef
|
||||
|
||||
$(eval $(call BuildTarget))
|
||||
358
target/linux/storm/config-default
Normal file
358
target/linux/storm/config-default
Normal file
@@ -0,0 +1,358 @@
|
||||
# CONFIG_AEABI is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
# CONFIG_ARCH_AT91 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_DAVINCI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_EP93XX is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP13XX is not set
|
||||
# CONFIG_ARCH_IOP32X is not set
|
||||
# CONFIG_ARCH_IOP33X is not set
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_IXP23XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
# CONFIG_ARCH_KS8695 is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_MXC is not set
|
||||
# CONFIG_ARCH_NETX is not set
|
||||
# CONFIG_ARCH_NS9XXX is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_PNX4008 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
CONFIG_ARCH_SL2312=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
CONFIG_ARM=y
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
# CONFIG_ATM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_BLK_DEV is not set
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
# CONFIG_BONDING is not set
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_BRIDGE_NETFILTER=y
|
||||
# CONFIG_BRIDGE_NF_EBTABLES is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_CLS_U32_PERF is not set
|
||||
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttySL0,19200 init=/etc/preinit mem=32M loglevel=8"
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_32v4=y
|
||||
CONFIG_CPU_ABRT_EV4=y
|
||||
CONFIG_CPU_CACHE_FA=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_FA=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
CONFIG_CPU_FA526=y
|
||||
CONFIG_CPU_FA_BTB=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_TLB_FA=y
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
# CONFIG_CRYPTO is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_DEVRES is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
# CONFIG_DEBUG_ERRORS is not set
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
# CONFIG_DEBUG_LIST is not set
|
||||
# CONFIG_DEBUG_LL is not set
|
||||
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||
# CONFIG_DEBUG_LOCK_ALLOC is not set
|
||||
# CONFIG_DEBUG_MUTEXES is not set
|
||||
# CONFIG_DEBUG_SHIRQ is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
CONFIG_DEFAULT_IOSCHED="noop"
|
||||
CONFIG_DEFAULT_NOOP=y
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
# CONFIG_DETECT_SOFTLOCKUP is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_EXT2_FS is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_FAULT_INJECTION is not set
|
||||
CONFIG_FORCED_INLINING=y
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
# CONFIG_FPE_NWFPE is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_FUTEX is not set
|
||||
# CONFIG_FW_LOADER is not set
|
||||
CONFIG_GEMINI_GPIO_DEV=y
|
||||
# CONFIG_GEMINI_IPI is not set
|
||||
# CONFIG_GENERIC_CLOCKEVENTS is not set
|
||||
# CONFIG_GENERIC_GPIO is not set
|
||||
# CONFIG_GENERIC_TIME is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_IDE is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
# CONFIG_IFB is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
# CONFIG_IMQ is not set
|
||||
# CONFIG_INET6_TUNNEL is not set
|
||||
# CONFIG_INET6_XFRM_TUNNEL is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_DIAG is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_XFRM_MODE_BEET=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_TUNNEL is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IPSEC_NAT_TRAVERSAL is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_IP_MROUTE=y
|
||||
# CONFIG_IP_NF_ARPTABLES is not set
|
||||
CONFIG_IP_NF_FILTER=m
|
||||
CONFIG_IP_NF_IPTABLES=m
|
||||
CONFIG_IP_NF_MANGLE=m
|
||||
# CONFIG_IP_NF_MATCH_AH is not set
|
||||
# CONFIG_IP_NF_MATCH_ECN is not set
|
||||
# CONFIG_IP_NF_MATCH_IPP2P is not set
|
||||
# CONFIG_IP_NF_MATCH_OWNER is not set
|
||||
# CONFIG_IP_NF_MATCH_RECENT is not set
|
||||
# CONFIG_IP_NF_MATCH_TIME is not set
|
||||
# CONFIG_IP_NF_MATCH_TOS is not set
|
||||
# CONFIG_IP_NF_MATCH_TTL is not set
|
||||
# CONFIG_IP_NF_QUEUE is not set
|
||||
# CONFIG_IP_NF_SET is not set
|
||||
# CONFIG_IP_NF_TARGET_ECN is not set
|
||||
# CONFIG_IP_NF_TARGET_IMQ is not set
|
||||
# CONFIG_IP_NF_TARGET_LOG is not set
|
||||
# CONFIG_IP_NF_TARGET_REJECT is not set
|
||||
# CONFIG_IP_NF_TARGET_ROUTE is not set
|
||||
# CONFIG_IP_NF_TARGET_TOS is not set
|
||||
# CONFIG_IP_NF_TARGET_TTL is not set
|
||||
# CONFIG_IP_NF_TARGET_ULOG is not set
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
# CONFIG_ISDN is not set
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_JFFS2_RTIME is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
CONFIG_LLC=m
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_LOCK_STAT is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_MINI_FO is not set
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
# CONFIG_MTD_CFI_I2 is not set
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_NOSWAP=y
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
# CONFIG_MTD_OTP is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_RAM is not set
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
|
||||
# CONFIG_MTD_ROOTFS_SPLIT is not set
|
||||
# CONFIG_MTD_SERIAL is not set
|
||||
CONFIG_MTD_SL2312_CFI=y
|
||||
# CONFIG_MTD_SL2312_SERIAL_ATMEL is not set
|
||||
# CONFIG_MTD_SL2312_SERIAL_ST is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
CONFIG_NETFILTER_XTABLES=m
|
||||
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
|
||||
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
|
||||
# CONFIG_NET_ACT_GACT is not set
|
||||
# CONFIG_NET_ACT_IPT is not set
|
||||
# CONFIG_NET_ACT_MIRRED is not set
|
||||
# CONFIG_NET_ACT_PEDIT is not set
|
||||
# CONFIG_NET_CLS_RSVP is not set
|
||||
# CONFIG_NET_CLS_RSVP6 is not set
|
||||
# CONFIG_NET_EMATCH is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
# CONFIG_NET_PCI is not set
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NET_SCH_DSMARK is not set
|
||||
# CONFIG_NET_SCH_ESFQ is not set
|
||||
# CONFIG_NET_SCH_GRED is not set
|
||||
# CONFIG_NET_SCH_HFSC is not set
|
||||
# CONFIG_NET_SCH_HTB is not set
|
||||
# CONFIG_NET_SCH_INGRESS is not set
|
||||
# CONFIG_NET_SCH_PRIO is not set
|
||||
# CONFIG_NET_SCH_RED is not set
|
||||
# CONFIG_NET_SCH_RR is not set
|
||||
# CONFIG_NET_SCH_SFQ is not set
|
||||
# CONFIG_NET_SCH_TBF is not set
|
||||
# CONFIG_NET_SCH_TEQL is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
# CONFIG_NFSD is not set
|
||||
# CONFIG_NFS_FS is not set
|
||||
# CONFIG_NF_CONNTRACK is not set
|
||||
# CONFIG_NF_CONNTRACK_ENABLED is not set
|
||||
# CONFIG_NLS is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_OUTER_CACHE is not set
|
||||
CONFIG_PACKET=m
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
CONFIG_PCI_SYSCALL=y
|
||||
# CONFIG_PPP is not set
|
||||
CONFIG_PRINTK_TIME=y
|
||||
# CONFIG_PROVE_LOCKING is not set
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_RTC_LIB=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_SL2312=y
|
||||
CONFIG_SERIAL_SL2312_CONSOLE=y
|
||||
# CONFIG_SHMEM is not set
|
||||
# CONFIG_SL2312_LPC is not set
|
||||
# CONFIG_SL2312_SHARE_PIN is not set
|
||||
# CONFIG_SL2312_USB is not set
|
||||
CONFIG_SL3516_ASIC=y
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
# CONFIG_SOUND is not set
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_SWAP is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
# CONFIG_SYSVIPC is not set
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
# CONFIG_TICK_ONESHOT is not set
|
||||
# CONFIG_TIMER_STATS is not set
|
||||
CONFIG_TINY_SHMEM=y
|
||||
# CONFIG_TUN is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
CONFIG_UID16=y
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
CONFIG_VLAN_8021Q=m
|
||||
# CONFIG_WLAN_80211 is not set
|
||||
# CONFIG_XFRM_USER is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
41
target/linux/storm/image/Makefile
Normal file
41
target/linux/storm/image/Makefile
Normal file
@@ -0,0 +1,41 @@
|
||||
#
|
||||
# Copyright (C) 2007 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/image.mk
|
||||
|
||||
define Image/Prepare
|
||||
cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage
|
||||
endef
|
||||
|
||||
define Image/BuildKernel
|
||||
cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
|
||||
#
|
||||
# XXX - FIXME
|
||||
#
|
||||
# BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh
|
||||
endef
|
||||
|
||||
define Image/Build
|
||||
$(call Image/Build/$(1),$(1))
|
||||
endef
|
||||
|
||||
define Image/Build/jffs2-64k
|
||||
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=65536 conv=sync
|
||||
endef
|
||||
|
||||
define Image/Build/jffs2-128k
|
||||
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync
|
||||
$(call Image/Build/slug,$(1))
|
||||
endef
|
||||
|
||||
define Image/Build/squashfs
|
||||
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
||||
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync
|
||||
$(call Image/Build/slug,$(1))
|
||||
endef
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
9010
target/linux/storm/patches/1001-arch.patch
Normal file
9010
target/linux/storm/patches/1001-arch.patch
Normal file
File diff suppressed because it is too large
Load Diff
18584
target/linux/storm/patches/1002-gmac.patch
Normal file
18584
target/linux/storm/patches/1002-gmac.patch
Normal file
File diff suppressed because it is too large
Load Diff
13
target/linux/storm/patches/1003-gmac_one_phy.patch
Normal file
13
target/linux/storm/patches/1003-gmac_one_phy.patch
Normal file
@@ -0,0 +1,13 @@
|
||||
Index: linux-2.6.x/include/asm-arm/arch-sl2312/sl351x_gmac.h
|
||||
===================================================================
|
||||
--- linux-2.6.x.orig/include/asm-arm/arch-sl2312/sl351x_gmac.h 2007-09-04 14:18:28.540865746 +0300
|
||||
+++ linux-2.6.x/include/asm-arm/arch-sl2312/sl351x_gmac.h 2007-09-04 14:15:55.584200244 +0300
|
||||
@@ -21,7 +21,7 @@
|
||||
#undef BIG_ENDIAN
|
||||
#define BIG_ENDIAN 0
|
||||
#define GMAC_DEBUG 1
|
||||
-#define GMAC_NUM 2
|
||||
+#define GMAC_NUM 1
|
||||
//#define L2_jumbo_frame 1
|
||||
|
||||
#define _PACKED_ __attribute__ ((aligned(1), packed))
|
||||
83
target/linux/storm/patches/1004-gmac-enable-napi.patch
Normal file
83
target/linux/storm/patches/1004-gmac-enable-napi.patch
Normal file
@@ -0,0 +1,83 @@
|
||||
Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c
|
||||
===================================================================
|
||||
--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 16:59:23.361457295 +0200
|
||||
+++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:00:32.365389612 +0200
|
||||
@@ -68,9 +68,11 @@
|
||||
#include <linux/ip.h>
|
||||
#endif
|
||||
|
||||
+/* Enables NAPI unconditionally */
|
||||
+#define CONFIG_SL_NAPI 1
|
||||
+
|
||||
// #define SL351x_TEST_WORKAROUND
|
||||
#ifdef CONFIG_SL351x_NAT
|
||||
-#define CONFIG_SL_NAPI 1
|
||||
#endif
|
||||
#define GMAX_TX_INTR_DISABLED 1
|
||||
#define DO_HW_CHKSUM 1
|
||||
@@ -124,12 +126,17 @@
|
||||
*************************************************************/
|
||||
static int gmac_initialized = 0;
|
||||
TOE_INFO_T toe_private_data;
|
||||
-//static int do_again = 0;
|
||||
+static int do_again = 0;
|
||||
spinlock_t gmac_fq_lock;
|
||||
unsigned int FLAG_SWITCH;
|
||||
|
||||
static unsigned int next_tick = 3 * HZ;
|
||||
-static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
|
||||
+static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {
|
||||
+ {0x00,0x11,0x11,0x87,0x87,0x87},
|
||||
+#if GMAC_NUM != 1
|
||||
+ {0x00,0x22,0x22,0xab,0xab,0xab}
|
||||
+#endif
|
||||
+};
|
||||
|
||||
#undef CONFIG_SL351x_RXTOE
|
||||
extern NAT_CFG_T nat_cfg;
|
||||
@@ -2443,7 +2450,8 @@
|
||||
toe = (TOE_INFO_T *)&toe_private_data;
|
||||
// handle NAPI
|
||||
#ifdef CONFIG_SL_NAPI
|
||||
-if (storlink_ctl.pauseoff == 1)
|
||||
+ /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
|
||||
+if (1)
|
||||
{
|
||||
/* disable GMAC interrupt */
|
||||
//toe_gmac_disable_interrupt(tp->irq);
|
||||
@@ -2530,7 +2538,7 @@
|
||||
{
|
||||
if (likely(netif_rx_schedule_prep(dev)))
|
||||
{
|
||||
- unsigned int data32;
|
||||
+ // unsigned int data32;
|
||||
// disable GMAC-0 rx interrupt
|
||||
// class-Q & TOE-Q are implemented in future
|
||||
//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
@@ -2563,7 +2571,7 @@
|
||||
{
|
||||
if (likely(netif_rx_schedule_prep(dev)))
|
||||
{
|
||||
- unsigned int data32;
|
||||
+ // unsigned int data32;
|
||||
// disable GMAC-0 rx interrupt
|
||||
// class-Q & TOE-Q are implemented in future
|
||||
//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
@@ -4217,7 +4225,7 @@
|
||||
GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
|
||||
unsigned int status4;
|
||||
volatile DMA_RWPTR_T fq_rwptr;
|
||||
- int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
|
||||
+ // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
|
||||
//unsigned long rx_old_bytes;
|
||||
struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
|
||||
//unsigned long long rx_time;
|
||||
@@ -4479,7 +4487,7 @@
|
||||
|
||||
if (rwptr.bits.rptr == rwptr.bits.wptr)
|
||||
{
|
||||
- unsigned int data32;
|
||||
+ // unsigned int data32;
|
||||
//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
|
||||
|
||||
/* Receive descriptor is empty now */
|
||||
250
target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch
Normal file
250
target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch
Normal file
@@ -0,0 +1,250 @@
|
||||
Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c
|
||||
===================================================================
|
||||
--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 17:00:32.365389612 +0200
|
||||
+++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:00:55.366700383 +0200
|
||||
@@ -127,6 +127,7 @@
|
||||
static int gmac_initialized = 0;
|
||||
TOE_INFO_T toe_private_data;
|
||||
static int do_again = 0;
|
||||
+static int rx_poll_enabled;
|
||||
spinlock_t gmac_fq_lock;
|
||||
unsigned int FLAG_SWITCH;
|
||||
|
||||
@@ -1065,7 +1066,8 @@
|
||||
tp->intr3_enabled = 0xffffffff;
|
||||
tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
|
||||
HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
|
||||
- tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
|
||||
+ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT;
|
||||
+ // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT;
|
||||
|
||||
data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
|
||||
writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
|
||||
@@ -1115,7 +1117,7 @@
|
||||
tp->intr3_enabled |= 0xffffffff;
|
||||
tp->intr4_selected |= CLASS_RX_FULL_INT_BITS |
|
||||
HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
|
||||
- tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT;
|
||||
+ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT;
|
||||
}
|
||||
data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
|
||||
writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
|
||||
@@ -2408,7 +2410,7 @@
|
||||
// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
|
||||
|
||||
fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
|
||||
- spin_lock_irqsave(&gmac_fq_lock, flags);
|
||||
+ // spin_lock_irqsave(&gmac_fq_lock, flags);
|
||||
//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
|
||||
// TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
|
||||
while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
|
||||
@@ -2428,10 +2430,47 @@
|
||||
SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
|
||||
toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
|
||||
}
|
||||
- spin_unlock_irqrestore(&gmac_fq_lock, flags);
|
||||
+ // spin_unlock_irqrestore(&gmac_fq_lock, flags);
|
||||
}
|
||||
// EXPORT_SYMBOL(toe_gmac_fill_free_q);
|
||||
|
||||
+static void gmac_registers(const char *message)
|
||||
+{
|
||||
+ unsigned int status0;
|
||||
+ unsigned int status1;
|
||||
+ unsigned int status2;
|
||||
+ unsigned int status3;
|
||||
+ unsigned int status4;
|
||||
+
|
||||
+ printk("%s\n", message);
|
||||
+
|
||||
+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
|
||||
+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
|
||||
+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
|
||||
+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
|
||||
+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
|
||||
+
|
||||
+ printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
|
||||
+ status0, status1, status2, status3, status4);
|
||||
+
|
||||
+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
|
||||
+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
|
||||
+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
|
||||
+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+
|
||||
+ printk("mask : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
|
||||
+ status0, status1, status2, status3, status4);
|
||||
+
|
||||
+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
|
||||
+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
|
||||
+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
|
||||
+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
|
||||
+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+
|
||||
+ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
|
||||
+ status0, status1, status2, status3, status4);
|
||||
+}
|
||||
/*----------------------------------------------------------------------
|
||||
* toe_gmac_interrupt
|
||||
*----------------------------------------------------------------------*/
|
||||
@@ -2492,6 +2531,7 @@
|
||||
writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
|
||||
if (status4)
|
||||
writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
|
||||
+
|
||||
#if 0
|
||||
/* handle freeq interrupt first */
|
||||
if (status4 & tp->intr4_enabled) {
|
||||
@@ -2536,10 +2576,31 @@
|
||||
}
|
||||
if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
|
||||
{
|
||||
- if (likely(netif_rx_schedule_prep(dev)))
|
||||
+ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
|
||||
{
|
||||
- // unsigned int data32;
|
||||
- // disable GMAC-0 rx interrupt
|
||||
+ unsigned int data32;
|
||||
+
|
||||
+ if (rx_poll_enabled)
|
||||
+ gmac_registers("check #1");
|
||||
+
|
||||
+ BUG_ON(rx_poll_enabled == 1);
|
||||
+
|
||||
+#if 0
|
||||
+ /* Masks GMAC-0 rx interrupt */
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+ data32 &= ~(DEFAULT_Q0_INT_BIT);
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+
|
||||
+ /* Masks GMAC-0 queue empty interrupt */
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+ data32 &= ~DEFAULT_Q0_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+ data32 &= ~DEFAULT_Q0_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+#endif
|
||||
+
|
||||
// class-Q & TOE-Q are implemented in future
|
||||
//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
//data32 &= ~DEFAULT_Q0_INT_BIT;
|
||||
@@ -2549,7 +2610,8 @@
|
||||
//tp->total_q_cnt_napi=0;
|
||||
//rx_time = jiffies;
|
||||
//rx_old_bytes = isPtr->rx_bytes;
|
||||
- __netif_rx_schedule(dev);
|
||||
+ __netif_rx_schedule(dev);
|
||||
+ rx_poll_enabled = 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -2569,9 +2631,31 @@
|
||||
|
||||
if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
|
||||
{
|
||||
- if (likely(netif_rx_schedule_prep(dev)))
|
||||
+ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
|
||||
{
|
||||
- // unsigned int data32;
|
||||
+ unsigned int data32;
|
||||
+
|
||||
+ if (rx_poll_enabled)
|
||||
+ gmac_registers("check #2");
|
||||
+
|
||||
+ BUG_ON(rx_poll_enabled == 1);
|
||||
+
|
||||
+#if 0
|
||||
+ /* Masks GMAC-1 rx interrupt */
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+ data32 &= ~(DEFAULT_Q1_INT_BIT);
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+
|
||||
+ /* Masks GMAC-1 queue empty interrupt */
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+ data32 &= ~DEFAULT_Q1_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+ data32 &= ~DEFAULT_Q1_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+#endif
|
||||
+
|
||||
// disable GMAC-0 rx interrupt
|
||||
// class-Q & TOE-Q are implemented in future
|
||||
//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
@@ -2583,9 +2667,13 @@
|
||||
//rx_time = jiffies;
|
||||
//rx_old_bytes = isPtr->rx_bytes;
|
||||
__netif_rx_schedule(dev);
|
||||
+ rx_poll_enabled = 1;
|
||||
}
|
||||
}
|
||||
}
|
||||
+ } else {
|
||||
+
|
||||
+ gmac_registers("check #3");
|
||||
}
|
||||
|
||||
// Interrupt Status 0
|
||||
@@ -3306,8 +3394,10 @@
|
||||
SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
|
||||
tp->rx_rwptr.bits32 = rwptr.bits32;
|
||||
|
||||
- toe_gmac_fill_free_q();
|
||||
}
|
||||
+
|
||||
+ /* Handles first available packets only then refill the queue. */
|
||||
+ toe_gmac_fill_free_q();
|
||||
}
|
||||
|
||||
/*----------------------------------------------------------------------
|
||||
@@ -4217,6 +4307,7 @@
|
||||
GMAC_RXDESC_T *curr_desc;
|
||||
struct sk_buff *skb;
|
||||
DMA_RWPTR_T rwptr;
|
||||
+ unsigned int data32;
|
||||
unsigned int pkt_size;
|
||||
unsigned int desc_count;
|
||||
unsigned int good_frame, chksum_status, rx_status;
|
||||
@@ -4231,7 +4322,7 @@
|
||||
//unsigned long long rx_time;
|
||||
|
||||
|
||||
-
|
||||
+ BUG_ON(rx_poll_enabled == 0);
|
||||
#if 1
|
||||
if (do_again)
|
||||
{
|
||||
@@ -4516,6 +4607,30 @@
|
||||
#endif
|
||||
//toe_gmac_fill_free_q();
|
||||
netif_rx_complete(dev);
|
||||
+
|
||||
+ rx_poll_enabled = 0;
|
||||
+
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+ if (tp->port_id == 0)
|
||||
+ data32 |= DEFAULT_Q0_INT_BIT;
|
||||
+ else
|
||||
+ data32 |= DEFAULT_Q1_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
+
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+ if (tp->port_id == 0)
|
||||
+ data32 |= DEFAULT_Q0_INT_BIT;
|
||||
+ else
|
||||
+ data32 |= DEFAULT_Q1_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
|
||||
+
|
||||
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+ if (tp->port_id == 0)
|
||||
+ data32 |= DEFAULT_Q0_INT_BIT;
|
||||
+ else
|
||||
+ data32 |= DEFAULT_Q1_INT_BIT;
|
||||
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
|
||||
+
|
||||
// enable GMAC-0 rx interrupt
|
||||
// class-Q & TOE-Q are implemented in future
|
||||
//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
|
||||
2098
target/linux/storm/patches/1006-gmac-napi-tx.patch
Normal file
2098
target/linux/storm/patches/1006-gmac-napi-tx.patch
Normal file
File diff suppressed because it is too large
Load Diff
4981
target/linux/storm/patches/1020-mtd.patch
Normal file
4981
target/linux/storm/patches/1020-mtd.patch
Normal file
File diff suppressed because it is too large
Load Diff
2825
target/linux/storm/patches/1021-serial.patch
Normal file
2825
target/linux/storm/patches/1021-serial.patch
Normal file
File diff suppressed because it is too large
Load Diff
390
target/linux/storm/patches/1100-gpio.patch
Normal file
390
target/linux/storm/patches/1100-gpio.patch
Normal file
@@ -0,0 +1,390 @@
|
||||
Index: linux-2.6.23.16/drivers/char/gemini_gpio_dev.c
|
||||
===================================================================
|
||||
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
||||
+++ linux-2.6.23.16/drivers/char/gemini_gpio_dev.c 2008-03-15 17:05:28.382258620 +0200
|
||||
@@ -0,0 +1,356 @@
|
||||
+/*
|
||||
+ * GPIO driver for Gemini board
|
||||
+ * Provides /dev/gpio
|
||||
+ */
|
||||
+
|
||||
+#include <linux/version.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/proc_fs.h>
|
||||
+#include <linux/fcntl.h>
|
||||
+#include <linux/miscdevice.h>
|
||||
+#include <asm/uaccess.h> /* copy_to_user, copy_from_user */
|
||||
+
|
||||
+#include <asm/hardware.h>
|
||||
+#include <asm/io.h>
|
||||
+#include <asm/arch/sl2312.h>
|
||||
+#include <asm/arch/irqs.h>
|
||||
+#include <asm/arch/gemini_gpio.h>
|
||||
+
|
||||
+#define GEMINI_GPIO_BASE1 IO_ADDRESS(SL2312_GPIO_BASE)
|
||||
+#define GEMINI_GPIO_BASE2 IO_ADDRESS(SL2312_GPIO_BASE1)
|
||||
+
|
||||
+#define GPIO_SET 2
|
||||
+#define MAX_GPIO_LINE 32*GPIO_SET
|
||||
+
|
||||
+wait_queue_head_t gemini_gpio_wait[MAX_GPIO_LINE];
|
||||
+
|
||||
+enum GPIO_REG
|
||||
+{
|
||||
+ GPIO_DATA_OUT = 0x00,
|
||||
+ GPIO_DATA_IN = 0x04,
|
||||
+ GPIO_PIN_DIR = 0x08,
|
||||
+ GPIO_BY_PASS = 0x0C,
|
||||
+ GPIO_DATA_SET = 0x10,
|
||||
+ GPIO_DATA_CLEAR = 0x14,
|
||||
+ GPIO_PULL_ENABLE = 0x18,
|
||||
+ GPIO_PULL_TYPE = 0x1C,
|
||||
+ GPIO_INT_ENABLE = 0x20,
|
||||
+ GPIO_INT_RAW_STATUS = 0x24,
|
||||
+ GPIO_INT_MASK_STATUS = 0x28,
|
||||
+ GPIO_INT_MASK = 0x2C,
|
||||
+ GPIO_INT_CLEAR = 0x30,
|
||||
+ GPIO_INT_TRIG = 0x34,
|
||||
+ GPIO_INT_BOTH = 0x38,
|
||||
+ GPIO_INT_POLAR = 0x3C
|
||||
+};
|
||||
+
|
||||
+unsigned int regist_gpio_int0=0,regist_gpio_int1=0;
|
||||
+
|
||||
+/* defines a specific GPIO bit number and state */
|
||||
+struct gpio_bit {
|
||||
+ unsigned char bit;
|
||||
+ unsigned char state;
|
||||
+};
|
||||
+
|
||||
+#define GPIO_MAJOR 10
|
||||
+#define GPIO_MINOR 127
|
||||
+
|
||||
+/*
|
||||
+ * ioctl calls that are permitted to the /dev/gpio interface
|
||||
+ */
|
||||
+#define GPIO_GET_BIT 0x0000001
|
||||
+#define GPIO_SET_BIT 0x0000002
|
||||
+#define GPIO_GET_CONFIG 0x0000003
|
||||
+#define GPIO_SET_CONFIG 0x0000004
|
||||
+
|
||||
+//#define GPIO_CONFIG_OUT 1
|
||||
+//#define GPIO_CONFIG_IN 2
|
||||
+
|
||||
+
|
||||
+
|
||||
+#define DEVICE_NAME "gpio"
|
||||
+
|
||||
+//#define DEBUG
|
||||
+
|
||||
+/*
|
||||
+ * GPIO interface
|
||||
+ */
|
||||
+
|
||||
+/* /dev/gpio */
|
||||
+static int gpio_ioctl(struct inode *inode, struct file *file,
|
||||
+ unsigned int cmd, unsigned long arg);
|
||||
+
|
||||
+/* /proc/driver/gpio */
|
||||
+static int gpio_read_proc(char *page, char **start, off_t off,
|
||||
+ int count, int *eof, void *data);
|
||||
+
|
||||
+static unsigned char gpio_status; /* bitmapped status byte. */
|
||||
+
|
||||
+/* functions for set/get gpio lines on storlink cpu */
|
||||
+
|
||||
+void gpio_line_get(unsigned char pin, u32 * data)
|
||||
+{
|
||||
+ unsigned int set = pin >>5; // each GPIO set has 32 pins
|
||||
+ unsigned int status,addr;
|
||||
+
|
||||
+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1) + GPIO_DATA_IN;
|
||||
+ status = readl(addr);
|
||||
+#ifdef DEBUG
|
||||
+ printk("status = %08X, pin = %d, set = %d\n", status, pin, set);
|
||||
+#endif
|
||||
+ if (set)
|
||||
+ *data = (status&(1<<(pin-32)))?1:0;
|
||||
+ else
|
||||
+ *data = (status&(1<<pin))?1:0;
|
||||
+}
|
||||
+
|
||||
+void gpio_line_set(unsigned char pin, u32 high)
|
||||
+{
|
||||
+ unsigned char set = pin >>5; // each GPIO set has 32 pins
|
||||
+ unsigned int status=0,addr;
|
||||
+
|
||||
+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+(high?GPIO_DATA_SET:GPIO_DATA_CLEAR);
|
||||
+
|
||||
+ status &= ~(1 << (pin %32));
|
||||
+ status |= (1 << (pin % 32));
|
||||
+ writel(status,addr);
|
||||
+}
|
||||
+
|
||||
+/*
|
||||
+ * pin = [0..63]
|
||||
+ * mode =
|
||||
+ * 1 -- OUT
|
||||
+ * 2 -- IN
|
||||
+ */
|
||||
+void gpio_line_config(unsigned char pin, unsigned char mode)
|
||||
+{
|
||||
+ unsigned char set = pin >>5; // each GPIO set has 32 pins
|
||||
+ unsigned int status,addr;
|
||||
+
|
||||
+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PIN_DIR;
|
||||
+ status = readl(addr);
|
||||
+
|
||||
+ status &= ~(1 << (pin %32));
|
||||
+ if (mode == 1)
|
||||
+ status |= (1 << (pin % 32)); /* PinDir: 0 - input, 1 - output */
|
||||
+
|
||||
+ writel(status,addr);
|
||||
+#if 0
|
||||
+ /* enable pullup-high if mode is input */
|
||||
+
|
||||
+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_ENABLE;
|
||||
+ status = readl(addr);
|
||||
+
|
||||
+ status &= ~(1 << (pin %32));
|
||||
+ if (mode == 2) /* input */
|
||||
+ status |= (1 << (pin % 32)); /* PullEnable: 0 - disable, 1 - enable */
|
||||
+
|
||||
+ writel(status,addr);
|
||||
+
|
||||
+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_TYPE;
|
||||
+ status = readl(addr);
|
||||
+
|
||||
+ status &= ~(1 << (pin %32));
|
||||
+ if (mode == 2) /* input */
|
||||
+ status |= (1 << (pin % 32)); /* PullType: 0 - low, 1 - high */
|
||||
+
|
||||
+ writel(status,addr);
|
||||
+#endif
|
||||
+}
|
||||
+
|
||||
+#define GPIO_IS_OPEN 0x01 /* means /dev/gpio is in use */
|
||||
+
|
||||
+/*
|
||||
+ * Now all the various file operations that we export.
|
||||
+ */
|
||||
+static int gpio_ioctl(struct inode *inode, struct file *file,
|
||||
+ unsigned int cmd, unsigned long arg)
|
||||
+{
|
||||
+ struct gpio_bit bit;
|
||||
+ u32 val;
|
||||
+
|
||||
+ if (copy_from_user(&bit, (struct gpio_bit *)arg,
|
||||
+ sizeof(bit)))
|
||||
+ return -EFAULT;
|
||||
+
|
||||
+ switch (cmd) {
|
||||
+
|
||||
+ case GPIO_GET_BIT:
|
||||
+ gpio_line_get(bit.bit, &val);
|
||||
+ bit.state = val;
|
||||
+ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
|
||||
+ case GPIO_SET_BIT:
|
||||
+ val = bit.state;
|
||||
+ gpio_line_set(bit.bit, val);
|
||||
+ return 0;
|
||||
+ case GPIO_GET_CONFIG:
|
||||
+ // gpio_line_config(bit.bit, bit.state);
|
||||
+ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
|
||||
+ case GPIO_SET_CONFIG:
|
||||
+ val = bit.state;
|
||||
+ gpio_line_config(bit.bit, bit.state);
|
||||
+ return 0;
|
||||
+ }
|
||||
+ return -EINVAL;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int gpio_open(struct inode *inode, struct file *file)
|
||||
+{
|
||||
+ if (gpio_status & GPIO_IS_OPEN)
|
||||
+ return -EBUSY;
|
||||
+
|
||||
+ gpio_status |= GPIO_IS_OPEN;
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int gpio_release(struct inode *inode, struct file *file)
|
||||
+{
|
||||
+ /*
|
||||
+ * Turn off all interrupts once the device is no longer
|
||||
+ * in use and clear the data.
|
||||
+ */
|
||||
+
|
||||
+ gpio_status &= ~GPIO_IS_OPEN;
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+/*
|
||||
+ * The various file operations we support.
|
||||
+ */
|
||||
+
|
||||
+static struct file_operations gpio_fops = {
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .ioctl = gpio_ioctl,
|
||||
+ .open = gpio_open,
|
||||
+ .release = gpio_release,
|
||||
+};
|
||||
+
|
||||
+static struct miscdevice gpio_dev =
|
||||
+{
|
||||
+ .minor = GPIO_MINOR,
|
||||
+ .name = "gpio",
|
||||
+ .fops = &gpio_fops,
|
||||
+};
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+#ifdef CONFIG_PROC_FS
|
||||
+static struct proc_dir_entry *dir;
|
||||
+
|
||||
+/*
|
||||
+ * Info exported via "/proc/driver/gpio".
|
||||
+ */
|
||||
+static int gpio_get_status(char *buf)
|
||||
+{
|
||||
+ char *p = buf;
|
||||
+ u32 val = 0;
|
||||
+ int i;
|
||||
+ int bit;
|
||||
+#ifdef DEBUG
|
||||
+ u32 addr;
|
||||
+
|
||||
+ for (i = 0; i < 0x20; i+=4 ) {
|
||||
+ addr = IO_ADDRESS(SL2312_GPIO_BASE) + i;
|
||||
+ val = readl(addr);
|
||||
+ p+=sprintf(p, "GPIO0: 0x%02X: %08X\n", i, val );
|
||||
+ }
|
||||
+ for (i = 0; i < 0x20; i+=4 ) {
|
||||
+ addr = IO_ADDRESS(SL2312_GPIO_BASE1) + i;
|
||||
+ val = readl(addr);
|
||||
+ p+=sprintf(p, "GPIO1: 0x%02X: %08X\n", i, val );
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
+ for (i = 0; i < 32; i++) {
|
||||
+ gpio_line_get(i, &bit);
|
||||
+ if (bit)
|
||||
+ val |= (1 << i);
|
||||
+ }
|
||||
+ p += sprintf(p, "gpio0\t: 0x%08x\n", val);
|
||||
+
|
||||
+ val = 0;
|
||||
+ for (i = 32; i < 64; i++) {
|
||||
+ gpio_line_get(i, &bit);
|
||||
+ if (bit)
|
||||
+ val |= (1 << i);
|
||||
+ }
|
||||
+ p += sprintf(p, "gpio1\t: 0x%08x\n", val);
|
||||
+
|
||||
+ return p - buf;
|
||||
+}
|
||||
+
|
||||
+
|
||||
+/* /proc/driver/gpio read op
|
||||
+ */
|
||||
+static int gpio_read_proc(char *page, char **start, off_t off,
|
||||
+ int count, int *eof, void *data)
|
||||
+{
|
||||
+ int len = gpio_get_status (page);
|
||||
+
|
||||
+ if (len <= off+count)
|
||||
+ *eof = 1;
|
||||
+ *start = page + off;
|
||||
+ len -= off;
|
||||
+ if ( len > count )
|
||||
+ len = count;
|
||||
+ if ( len < 0 )
|
||||
+ len = 0;
|
||||
+ return len;
|
||||
+}
|
||||
+#endif /* CONFIG_PROC_FS */
|
||||
+
|
||||
+
|
||||
+static int __init gpio_init_module(void)
|
||||
+{
|
||||
+ int retval;
|
||||
+#ifdef CONFIG_PROC_FS
|
||||
+ struct proc_dir_entry *res;
|
||||
+#endif
|
||||
+
|
||||
+ /* register /dev/gpio file ops */
|
||||
+ //retval = register_chrdev(GPIO_MAJOR, DEVICE_NAME, &gpio_fops);
|
||||
+ retval = misc_register(&gpio_dev);
|
||||
+ if(retval < 0)
|
||||
+ return retval;
|
||||
+
|
||||
+#ifdef CONFIG_PROC_FS
|
||||
+ dir = proc_mkdir("driver/gpio", NULL);
|
||||
+ if (!dir) {
|
||||
+ misc_deregister(&gpio_dev);
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+ /* register /proc/driver/gpio */
|
||||
+ res = create_proc_entry("info", 0644, dir);
|
||||
+ if (res) {
|
||||
+ res->read_proc= gpio_read_proc;
|
||||
+ } else {
|
||||
+ misc_deregister(&gpio_dev);
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
+ printk("%s: GPIO driver loaded\n", __FILE__);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void __exit gpio_cleanup_module(void)
|
||||
+{
|
||||
+ remove_proc_entry ("info", dir);
|
||||
+ misc_deregister(&gpio_dev);
|
||||
+
|
||||
+ printk("%s: GPIO driver unloaded\n", __FILE__);
|
||||
+}
|
||||
+
|
||||
+module_init(gpio_init_module);
|
||||
+module_exit(gpio_cleanup_module);
|
||||
+
|
||||
+MODULE_AUTHOR("Jonas Majauskas");
|
||||
+MODULE_LICENSE("GPL");
|
||||
+
|
||||
Index: linux-2.6.23.16/drivers/char/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.23.16.orig/drivers/char/Kconfig 2008-03-13 17:45:54.000221290 +0200
|
||||
+++ linux-2.6.23.16/drivers/char/Kconfig 2008-03-15 17:05:09.381175866 +0200
|
||||
@@ -1064,5 +1064,12 @@
|
||||
|
||||
source "drivers/s390/char/Kconfig"
|
||||
|
||||
+config GEMINI_GPIO_DEV
|
||||
+ tristate "GPIO driver for Gemini board (provides /dev/gpio)"
|
||||
+ depends on ARCH_SL2312
|
||||
+ default n
|
||||
+ help
|
||||
+ GPIO driver for Gemini boards - SL3512, SL3516.
|
||||
+
|
||||
endmenu
|
||||
|
||||
Index: linux-2.6.23.16/drivers/char/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:04:35.879266660 +0200
|
||||
+++ linux-2.6.23.16/drivers/char/Makefile 2008-03-15 17:05:09.381175866 +0200
|
||||
@@ -115,6 +115,7 @@
|
||||
|
||||
obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
|
||||
obj-$(CONFIG_TCG_TPM) += tpm/
|
||||
+obj-$(CONFIG_GEMINI_GPIO_DEV) += gemini_gpio_dev.o
|
||||
|
||||
obj-$(CONFIG_PS3_FLASH) += ps3flash.o
|
||||
|
||||
@@ -85,6 +85,7 @@ config TARGET_OPTIMIZATION
|
||||
default "-Os -pipe -march=i486 -funit-at-a-time" if TARGET_rdc
|
||||
default "-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time" if mipsel || mips
|
||||
default "-Os -pipe -march=armv5te -mtune=xscale -funit-at-a-time" if TARGET_ixp4xx || TARGET_iop32x || TARGET_pxa
|
||||
default "-Os -pipe -march=armv4t -mtune=arm9tdmi -funit-at-a-time" if TARGET_storm
|
||||
default "-Os -pipe -funit-at-a-time"
|
||||
help
|
||||
Optimizations to use when building for the target host.
|
||||
|
||||
210
toolchain/uClibc/config/arm.storm
Normal file
210
toolchain/uClibc/config/arm.storm
Normal file
@@ -0,0 +1,210 @@
|
||||
#
|
||||
# Automatically generated make config: don't edit
|
||||
#
|
||||
# TARGET_alpha is not set
|
||||
TARGET_arm=y
|
||||
# TARGET_avr32 is not set
|
||||
# TARGET_bfin is not set
|
||||
# TARGET_cris is not set
|
||||
# TARGET_e1 is not set
|
||||
# TARGET_frv is not set
|
||||
# TARGET_h8300 is not set
|
||||
# TARGET_hppa is not set
|
||||
# TARGET_i386 is not set
|
||||
# TARGET_i960 is not set
|
||||
# TARGET_ia64 is not set
|
||||
# TARGET_m68k is not set
|
||||
# TARGET_microblaze is not set
|
||||
# TARGET_mips is not set
|
||||
# TARGET_nios is not set
|
||||
# TARGET_nios2 is not set
|
||||
# TARGET_powerpc is not set
|
||||
# TARGET_sh is not set
|
||||
# TARGET_sh64 is not set
|
||||
# TARGET_sparc is not set
|
||||
# TARGET_v850 is not set
|
||||
# TARGET_vax is not set
|
||||
# TARGET_x86_64 is not set
|
||||
|
||||
#
|
||||
# Target Architecture Features and Options
|
||||
#
|
||||
TARGET_ARCH="arm"
|
||||
FORCE_OPTIONS_FOR_ARCH=y
|
||||
# CONFIG_ARM_OABI is not set
|
||||
CONFIG_ARM_EABI=y
|
||||
USE_BX=y
|
||||
# CONFIG_GENERIC_ARM is not set
|
||||
# CONFIG_ARM610 is not set
|
||||
# CONFIG_ARM710 is not set
|
||||
# CONFIG_ARM7TDMI is not set
|
||||
# CONFIG_ARM720T is not set
|
||||
CONFIG_ARM920T=y
|
||||
# CONFIG_ARM922T is not set
|
||||
# CONFIG_ARM926T is not set
|
||||
# CONFIG_ARM10T is not set
|
||||
# CONFIG_ARM1136JF_S is not set
|
||||
# CONFIG_ARM1176JZ_S is not set
|
||||
# CONFIG_ARM1176JZF_S is not set
|
||||
# CONFIG_ARM_SA110 is not set
|
||||
# CONFIG_ARM_SA1100 is not set
|
||||
# CONFIG_ARM_XSCALE is not set
|
||||
# CONFIG_ARM_IWMMXT is not set
|
||||
ARCH_ANY_ENDIAN=y
|
||||
# ARCH_WANTS_BIG_ENDIAN is not set
|
||||
ARCH_WANTS_LITTLE_ENDIAN=y
|
||||
ARCH_HAS_MMU=y
|
||||
ARCH_USE_MMU=y
|
||||
UCLIBC_HAS_FLOATS=y
|
||||
UCLIBC_HAS_FPU=y
|
||||
UCLIBC_HAS_SOFT_FLOAT=y
|
||||
DO_C99_MATH=y
|
||||
KERNEL_SOURCE="./toolchain_build_arm/linux"
|
||||
KERNEL_HEADERS="./toolchain_build_arm/linux/include"
|
||||
HAVE_DOT_CONFIG=y
|
||||
|
||||
#
|
||||
# General Library Settings
|
||||
#
|
||||
# HAVE_NO_PIC is not set
|
||||
DOPIC=y
|
||||
# HAVE_NO_SHARED is not set
|
||||
HAVE_SHARED=y
|
||||
# ARCH_HAS_NO_LDSO is not set
|
||||
BUILD_UCLIBC_LDSO=y
|
||||
# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
|
||||
LDSO_LDD_SUPPORT=y
|
||||
LDSO_CACHE_SUPPORT=y
|
||||
# LDSO_PRELOAD_FILE_SUPPORT is not set
|
||||
LDSO_BASE_FILENAME="ld.so"
|
||||
LDSO_RUNPATH=y
|
||||
# DL_FINI_CRT_COMPAT is not set
|
||||
UCLIBC_CTOR_DTOR=y
|
||||
# HAS_NO_THREADS is not set
|
||||
UCLIBC_HAS_THREADS=y
|
||||
# PTHREADS_DEBUG_SUPPORT is not set
|
||||
UCLIBC_HAS_LFS=y
|
||||
LINUXTHREADS_OLD=y
|
||||
# UCLIBC_STATIC_LDCONFIG is not set
|
||||
# MALLOC is not set
|
||||
# MALLOC_SIMPLE is not set
|
||||
MALLOC_STANDARD=y
|
||||
MALLOC_GLIBC_COMPAT=y
|
||||
UCLIBC_DYNAMIC_ATEXIT=y
|
||||
COMPAT_ATEXIT=y
|
||||
# UCLIBC_SUSV3_LEGACY is not set
|
||||
UCLIBC_SUSV3_LEGACY_MACROS=y
|
||||
UCLIBC_HAS_SHADOW=y
|
||||
UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
|
||||
UCLIBC_HAS___PROGNAME=y
|
||||
# UNIX98PTY_ONLY is not set
|
||||
ASSUME_DEVPTS=y
|
||||
UCLIBC_HAS_TM_EXTENSIONS=y
|
||||
UCLIBC_HAS_TZ_CACHING=y
|
||||
UCLIBC_HAS_TZ_FILE=y
|
||||
UCLIBC_HAS_TZ_FILE_READ_MANY=y
|
||||
UCLIBC_TZ_FILE_PATH="/etc/TZ"
|
||||
|
||||
#
|
||||
# Advanced Library Settings
|
||||
#
|
||||
UCLIBC_PWD_BUFFER_SIZE=256
|
||||
UCLIBC_GRP_BUFFER_SIZE=256
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
UCLIBC_HAS_IPV6=y
|
||||
UCLIBC_HAS_RPC=y
|
||||
UCLIBC_HAS_FULL_RPC=y
|
||||
# UCLIBC_HAS_REENTRANT_RPC is not set
|
||||
# UCLIBC_USE_NETLINK is not set
|
||||
UCLIBC_HAS_BSD_RES_CLOSE=y
|
||||
|
||||
#
|
||||
# String and Stdio Support
|
||||
#
|
||||
UCLIBC_HAS_STRING_GENERIC_OPT=y
|
||||
UCLIBC_HAS_STRING_ARCH_OPT=y
|
||||
UCLIBC_HAS_CTYPE_TABLES=y
|
||||
UCLIBC_HAS_CTYPE_SIGNED=y
|
||||
# UCLIBC_HAS_CTYPE_UNSAFE is not set
|
||||
UCLIBC_HAS_CTYPE_CHECKED=y
|
||||
# UCLIBC_HAS_CTYPE_ENFORCED is not set
|
||||
UCLIBC_HAS_WCHAR=y
|
||||
# UCLIBC_HAS_LOCALE is not set
|
||||
UCLIBC_HAS_HEXADECIMAL_FLOATS=y
|
||||
UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
|
||||
UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
|
||||
UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
|
||||
# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
|
||||
# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
|
||||
# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
|
||||
# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
|
||||
# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
|
||||
UCLIBC_HAS_STDIO_BUFSIZ_4096=y
|
||||
# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
|
||||
UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
|
||||
# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
|
||||
# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
|
||||
# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
|
||||
UCLIBC_HAS_STDIO_GETC_MACRO=y
|
||||
UCLIBC_HAS_STDIO_PUTC_MACRO=y
|
||||
UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
|
||||
# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
|
||||
UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
|
||||
UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
|
||||
UCLIBC_HAS_PRINTF_M_SPEC=y
|
||||
UCLIBC_HAS_ERRNO_MESSAGES=y
|
||||
# UCLIBC_HAS_SYS_ERRLIST is not set
|
||||
UCLIBC_HAS_SIGNUM_MESSAGES=y
|
||||
# UCLIBC_HAS_SYS_SIGLIST is not set
|
||||
UCLIBC_HAS_GNU_GETOPT=y
|
||||
UCLIBC_HAS_GNU_GETSUBOPT=y
|
||||
|
||||
#
|
||||
# Big and Tall
|
||||
#
|
||||
UCLIBC_HAS_REGEX=y
|
||||
UCLIBC_HAS_REGEX_OLD=y
|
||||
UCLIBC_HAS_FNMATCH=y
|
||||
UCLIBC_HAS_FNMATCH_OLD=y
|
||||
UCLIBC_HAS_WORDEXP=y
|
||||
UCLIBC_HAS_FTW=y
|
||||
UCLIBC_HAS_GLOB=y
|
||||
UCLIBC_HAS_GNU_GLOB=y
|
||||
|
||||
#
|
||||
# Library Installation Options
|
||||
#
|
||||
SHARED_LIB_LOADER_PREFIX="/lib"
|
||||
RUNTIME_PREFIX="/"
|
||||
DEVEL_PREFIX="/usr/"
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# UCLIBC_BUILD_PIE is not set
|
||||
# UCLIBC_HAS_ARC4RANDOM is not set
|
||||
# HAVE_NO_SSP is not set
|
||||
# UCLIBC_HAS_SSP is not set
|
||||
UCLIBC_BUILD_RELRO=y
|
||||
# UCLIBC_BUILD_NOW is not set
|
||||
UCLIBC_BUILD_NOEXECSTACK=y
|
||||
|
||||
#
|
||||
# uClibc development/debugging options
|
||||
#
|
||||
CROSS_COMPILER_PREFIX=""
|
||||
UCLIBC_EXTRA_CFLAGS=""
|
||||
# DODEBUG is not set
|
||||
# DODEBUG_PT is not set
|
||||
DOSTRIP=y
|
||||
# DOASSERTS is not set
|
||||
# SUPPORT_LD_DEBUG is not set
|
||||
# SUPPORT_LD_DEBUG_EARLY is not set
|
||||
# UCLIBC_MALLOC_DEBUGGING is not set
|
||||
WARNINGS="-Wall"
|
||||
# EXTRA_WARNINGS is not set
|
||||
# DOMULTI is not set
|
||||
# UCLIBC_MJN3_ONLY is not set
|
||||
Reference in New Issue
Block a user