ramips: add support for SNR SNR-CPE-ME2-Lite
SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A.
Specification:
    - SoC           : MediaTek MT7621A
    - RAM           : DDR3 128 MiB
    - Flash         : SPI-NOR 16 MiB
    - WLAN          : 2.4 GHz 2T2R (MediaTek MT7603E)
                      5 GHz 2T2R (MediaTek MT7613BE)
    - Ethernet      : 10/100/1000 Mbps x5
      - Switch      : MediaTek MT7530 (SoC)
    - UART          : through-hole on PCB
      - J4: 3.3V, GND, TX, RX
      - 57600n8
    - Power         : 12 VDC, 1.5 A
Flash instruction via WEB (firmware 1.10.4 and later)
    1. Boot SNR-CPE-ME2-Lite normally with "Router" mode
    2. Access to "http://192.168.1.1/" and open "Administration -> Management" page
    3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button
    4. Wait ~120 seconds to complete flashing
Flash instruction via TFTP (all version):
    1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on)
    2. Send firmware via TFTP client:
       TFTP Server address: 192.168.1.1
       TFTP Client address: 192.168.1.131
    3. Wait ~120 seconds to complete flashing
Signed-off-by: Alexey Kosmakov <a.kosmakov@nagtech.ru>
			
			
This commit is contained in:
		 Alexey Kosmakov
					Alexey Kosmakov
				
			
				
					committed by
					
						 Hauke Mehrtens
						Hauke Mehrtens
					
				
			
			
				
	
			
			
			 Hauke Mehrtens
						Hauke Mehrtens
					
				
			
						parent
						
							bf5b1a53d4
						
					
				
				
					commit
					a664d39c5b
				
			
							
								
								
									
										173
									
								
								target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-lite.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										173
									
								
								target/linux/ramips/dts/mt7621_snr_snr-cpe-me2-lite.dts
									
									
									
									
									
										Normal file
									
								
							| @@ -0,0 +1,173 @@ | ||||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||||
| #include "mt7621.dtsi" | ||||
|  | ||||
| #include <dt-bindings/gpio/gpio.h> | ||||
| #include <dt-bindings/input/input.h> | ||||
| #include <dt-bindings/leds/common.h> | ||||
|  | ||||
| / { | ||||
| 	compatible = "snr,snr-cpe-me2-lite", "mediatek,mt7621-soc"; | ||||
| 	model = "SNR-CPE-ME2-Lite"; | ||||
|  | ||||
| 	leds { | ||||
| 		compatible = "gpio-leds"; | ||||
|  | ||||
| 		led_sys: led-0 { | ||||
| 			label = "green:sys"; | ||||
| 			color = <LED_COLOR_ID_GREEN>; | ||||
| 			function = LED_FUNCTION_STATUS; | ||||
| 			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; | ||||
| 		}; | ||||
|  | ||||
| 		led_vpn: led-1 { | ||||
| 			label = "green:vpn"; | ||||
| 			color = <LED_COLOR_ID_GREEN>; | ||||
| 			function = LED_FUNCTION_STATUS; | ||||
| 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>; | ||||
| 		}; | ||||
| 	}; | ||||
|  | ||||
| 	keys { | ||||
| 		compatible = "gpio-keys"; | ||||
|  | ||||
| 		reset { | ||||
| 			label = "reset"; | ||||
| 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>; | ||||
| 			linux,code = <KEY_RESTART>; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &state_default { | ||||
| 	gpio { | ||||
| 		groups = "jtag", "wdt"; | ||||
| 		function = "gpio"; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &gdma { | ||||
| 	status = "okay"; | ||||
| }; | ||||
|  | ||||
| &spi0 { | ||||
| 	status = "okay"; | ||||
|  | ||||
| 	flash@0 { | ||||
| 		compatible = "jedec,spi-nor"; | ||||
| 		reg = <0>; | ||||
| 		spi-max-frequency = <104000000>; | ||||
|  | ||||
| 		partitions { | ||||
| 			compatible = "fixed-partitions"; | ||||
| 			#address-cells = <1>; | ||||
| 			#size-cells = <1>; | ||||
|  | ||||
| 			partition@0 { | ||||
| 				label = "u-boot"; | ||||
| 				reg = <0x0 0x30000>; | ||||
| 				read-only; | ||||
| 			}; | ||||
|  | ||||
| 			partition@30000 { | ||||
| 				label = "config"; | ||||
| 				reg = <0x30000 0x10000>; | ||||
| 			}; | ||||
|  | ||||
| 			factory: partition@40000 { | ||||
| 				label = "factory"; | ||||
| 				reg = <0x40000 0x10000>; | ||||
| 				read-only; | ||||
| 			}; | ||||
|  | ||||
| 			partition@50000 { | ||||
| 				compatible = "denx,uimage"; | ||||
| 				label = "firmware"; | ||||
| 				reg = <0x50000 0xfb0000>; | ||||
| 			}; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &sdhci { | ||||
| 	status = "okay"; | ||||
| }; | ||||
|  | ||||
| &mdio { | ||||
| 	ethphy0: ethernet-phy@0 { | ||||
| 		reg = <0>; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &gmac0 { | ||||
| 	nvmem-cells = <&macaddr_factory_e000>; | ||||
| 	nvmem-cell-names = "mac-address"; | ||||
| }; | ||||
|  | ||||
| &gmac1 { | ||||
| 	status = "okay"; | ||||
| 	label = "wan"; | ||||
| 	phy-handle = <ðphy0>; | ||||
|  | ||||
| 	nvmem-cells = <&macaddr_factory_e006>; | ||||
| 	nvmem-cell-names = "mac-address"; | ||||
| }; | ||||
|  | ||||
| &switch0 { | ||||
| 	ports { | ||||
| 		port@1 { | ||||
| 			status = "okay"; | ||||
| 			label = "lan1"; | ||||
| 		}; | ||||
|  | ||||
| 		port@2 { | ||||
| 			status = "okay"; | ||||
| 			label = "lan2"; | ||||
| 		}; | ||||
|  | ||||
| 		port@3 { | ||||
| 			status = "okay"; | ||||
| 			label = "lan3"; | ||||
| 		}; | ||||
|  | ||||
| 		port@4 { | ||||
| 			status = "okay"; | ||||
| 			label = "lan4"; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &pcie { | ||||
| 	status = "okay"; | ||||
| }; | ||||
|  | ||||
| &pcie0 { | ||||
| 	wifi@0,0 { | ||||
| 		compatible = "mediatek,mt76"; | ||||
| 		reg = <0x0000 0 0 0 0>; | ||||
| 		mediatek,mtd-eeprom = <&factory 0x0000>; | ||||
| 		ieee80211-freq-limit = <2400000 2500000>; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &pcie1 { | ||||
| 	wifi@0,0 { | ||||
| 		compatible = "mediatek,mt76"; | ||||
| 		reg = <0x0000 0 0 0 0>; | ||||
| 		mediatek,mtd-eeprom = <&factory 0x8000>; | ||||
| 		ieee80211-freq-limit = <5000000 6000000>; | ||||
| 	}; | ||||
| }; | ||||
|  | ||||
| &factory { | ||||
| 	compatible = "nvmem-cells"; | ||||
| 	#address-cells = <1>; | ||||
| 	#size-cells = <1>; | ||||
|  | ||||
| 	macaddr_factory_e000: macaddr@e000 { | ||||
| 		reg = <0xe000 0x6>; | ||||
| 	}; | ||||
|  | ||||
| 	macaddr_factory_e006: macaddr@e006 { | ||||
| 		reg = <0xe006 0x6>; | ||||
| 	}; | ||||
| }; | ||||
| @@ -1723,6 +1723,17 @@ define Device/sercomm_na502s | ||||
| endef | ||||
| TARGET_DEVICES += sercomm_na502s | ||||
|  | ||||
| define Device/snr_snr-cpe-me2-lite | ||||
|   $(Device/dsa-migration) | ||||
|   $(Device/uimage-lzma-loader) | ||||
|   IMAGE_SIZE := 16064k | ||||
|   DEVICE_VENDOR := SNR | ||||
|   DEVICE_MODEL := SNR-CPE-ME2-Lite | ||||
|   UIMAGE_NAME := $$(DEVICE_MODEL) | ||||
|   DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap | ||||
| endef | ||||
| TARGET_DEVICES += snr_snr-cpe-me2-lite | ||||
|  | ||||
| define Device/storylink_sap-g3200u3 | ||||
|   $(Device/dsa-migration) | ||||
|   IMAGE_SIZE := 7872k | ||||
|   | ||||
		Reference in New Issue
	
	Block a user