domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: add support for Netgear WNDR4500 v3

Browse Source 
This patch introduces support for Netgear WNDR4500v3. Router
is very similar to WNDR4300v2 and is based on the same PCB.

Information gathered from various Internet sources (including
https://patchwork.ozlabs.org/patch/809227/) shows following
differences to WNDR4300v2:

 * two USB 2.0 ports with separate LEDs
 * USB LEDs soldered to secondary pads
 * WPS and RFKILL buttons soldered to secondary pads
 * described as N900 device with 3x3:3 MIMO for 2.4GHz radio
 * power supply requirement is DC 12V 2.5A
 * vendor HW ID suffix differs in one digit
 * bigger chassis

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
This commit is contained in:
Michal Cieslakiewicz
2019-12-22 21:55:54 +01:00
committed by John Crispin
parent 37a36a588a
commit a736f39432
6 changed files with 63 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/nand/base-files/etc/board.d/01_leds
View File

@@ -14,7 +14,8 @@ glinet,gl-ar300m-nor)
;;
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20"
;;
esac

6
target/linux/ath79/nand/base-files/etc/board.d/02_network
View File

@@ -18,7 +18,8 @@ ath79_setup_interfaces()
;;
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
@@ -39,7 +40,8 @@ ath79_setup_macs()
case "$board" in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
wan_mac=$(mtd_get_mac_binary caldata 0x6)
;;
zyxel,nbg6716)

6
target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@@ -11,7 +11,8 @@ case "$FIRMWARE" in
case $board in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
caldata_extract "caldata" 0x1000 0x440
;;
zyxel,nbg6716)
@@ -27,7 +28,8 @@ case "$FIRMWARE" in
case $board in
netgear,wndr3700-v4|\
netgear,wndr4300|\
netgear,wndr4300-v2)
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
caldata_extract "caldata" 0x5000 0x440
;;
*)