imx: introduce 'cortexa7' subtarget

This adds some essential files required by new 'cortexa7' subtarget,
dedicated for Cortex-A7 based NXP i.MX series. For now, the kernel
config-default focuses only on the i.MX 6UL family, as the following
changeset will introduce support for i.MX 6ULL based device. Support
for more platforms (e.g. i.MX 7) might be enabled later, while adding
more devices.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

target/linux/imx/Makefile

@@ -8,7 +8,7 @@ ARCH:=arm
 BOARD:=imx
 BOARDNAME:=NXP i.MX
 FEATURES:=audio display fpu gpio pcie rtc usb usbgadget squashfs targz nand ubifs boot-part rootfs-part
-SUBTARGETS:=cortexa9
+SUBTARGETS:=cortexa7 cortexa9
 
 KERNEL_PATCHVER:=5.4
 KERNEL_TESTING_PATCHVER:=5.10

target/linux/imx/cortexa7/base-files/etc/board.d/02_network

@@ -0,0 +1,15 @@
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case "$board" in
+*)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/imx/cortexa7/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,16 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}

target/linux/imx/cortexa7/config-default

@@ -0,0 +1,24 @@
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_GIC=y
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CONTIG_ALLOC=y
+# CONFIG_DMA_CMA is not set
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_JFFS2_FS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_PINCTRL_IMX=y
+CONFIG_PINCTRL_IMX6UL=y
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_SOC_IMX6=y
+CONFIG_SOC_IMX6UL=y
+CONFIG_SPI_FSL_QUADSPI=y
+CONFIG_SPI_MEM=y

target/linux/imx/cortexa7/target.mk

@@ -0,0 +1,7 @@
+BOARDNAME:=NXP i.MX with Cortex-A7
+CPU_TYPE:=cortex-a7
+CPU_SUBTYPE:=neon-vfpv4
+
+define Target/Description
+	Build firmware images for NXP i.MX (Cortex-A7) based boards.
+endef

target/linux/imx/image/cortexa7.mk

@@ -0,0 +1,10 @@
+define Device/Default
+  PROFILES := Default
+  FILESYSTEMS := squashfs ext4
+  KERNEL_INSTALL := 1
+  KERNEL_SUFFIX := -uImage
+  KERNEL_NAME := zImage
+  KERNEL := kernel-bin | uImage none
+  KERNEL_LOADADDR := 0x80008000
+  IMAGES :=
+endef