domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ramips: fix whitespace and comment issues in dts

Browse Source 
Fix space vs. tabs issue and trainling whitespaces. Use C style
comments or drop the comments if they explain what is already to see in
the devicetree parameters.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin
2018-07-22 10:33:42 +02:00
parent 53624c1702
commit bfd65fc4ab
28 changed files with 80 additions and 84 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/ramips/dts/11ACNAS.dts
View File

@@ -14,11 +14,6 @@
gpio-leds { gpio-leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb { usb {
label = "11acnas:green:usb"; label = "11acnas:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;

8
target/linux/ramips/dts/BR-6475ND.dts
View File

@@ -94,9 +94,11 @@
realtek,extif0 = <1 0 1 1 1 1 1 1 2>; realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
}; };
/* Unclear if this is the correct gpio setup; the USB ports are /*
unpopulated on a stock BR-6475nD, even though the hardware exists * Unclear if this is the correct gpio setup; the USB ports are
and the headers are there. */ * unpopulated on a stock BR-6475nD, even though the hardware exists
* and the headers are there.
*/
/* /*
gpio_export { gpio_export {
compatible = "gpio-export"; compatible = "gpio-export";

16
target/linux/ramips/dts/FREESTATION5.dts
View File

@@ -48,20 +48,24 @@
gpio-export { gpio-export {
compatible = "gpio-export"; compatible = "gpio-export";
// Used to enable power-over-ethernet passthrough from port0 to port1. /*
// Disable passthrough by default to prevent accidental equipment damage. * Used to enable power-over-ethernet passthrough from port0 to port1.
* Disable passthrough by default to prevent accidental equipment damage.
*/
poe { poe {
gpio-export,name = "poe-passthrough"; gpio-export,name = "poe-passthrough";
gpio-export,output = <1>; // OUT_INIT_HIGH gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
}; };
}; };
gpio-leds { gpio-leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
// The following leds are defined in the ArcOS firmware, but reportedly /*
// not present in the Freestation5 device. * The following leds are defined in the ArcOS firmware, but reportedly
* not present in the Freestation5 device.
*/
wifi { wifi {
label = "freestation5:unknown:wifi"; label = "freestation5:unknown:wifi";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;

1
target/linux/ramips/dts/RB750Gr3.dts
View File

@@ -104,7 +104,6 @@
label = "firmware"; label = "firmware";
reg = <0x50000 0xfb0000>; reg = <0x50000 0xfb0000>;
}; };
}; };
}; };

1
target/linux/ramips/dts/RBM33G.dts
View File

@@ -113,7 +113,6 @@
reg = <0xf000 0x71000>; reg = <0xf000 0x71000>;
read-only; read-only;
}; };
}; };
w25q128@1 { w25q128@1 {

1
target/linux/ramips/dts/SK-WB8.dts
View File

@@ -83,7 +83,6 @@
label = "firmware"; label = "firmware";
reg = <0x50000 0xfb0000>; reg = <0x50000 0xfb0000>;
}; };
}; };
}; };

10
target/linux/ramips/dts/UBNT-ER-e50.dtsi
View File

@@ -77,10 +77,12 @@
}; };
&spi0 { &spi0 {
/* This board has 2Mb spi flash soldered in and visible /*
from manufacturer's firmware. * This board has 2Mb spi flash soldered in and visible
But this SoC shares spi and nand pins, * from manufacturer's firmware.
and current driver does't handle this sharing well */ * But this SoC shares spi and nand pins,
* and current driver doesn't handle this sharing well
*/
status = "disabled"; status = "disabled";
m25p80@0 { m25p80@0 {

5
target/linux/ramips/dts/W2914NSV2.dts
View File

@@ -13,11 +13,6 @@
gpio-leds { gpio-leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb { usb {
label = "w2914nsv2:green:usb"; label = "w2914nsv2:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;

6
target/linux/ramips/dts/WRC-1167GHBK2-S.dts
View File

@@ -137,8 +137,10 @@
&pcie { &pcie {
status = "okay"; status = "okay";
// WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi, /*
// but it's not supported in OpenWrt. * WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
* but it's not supported in OpenWrt.
*/
}; };
&xhci { &xhci {

3
target/linux/ramips/dts/WRC-2533GST.dts
View File

@@ -167,8 +167,7 @@
&pcie { &pcie {
status = "okay"; status = "okay";
// WRC-2533GST has MT7615 for 2.4/5 GHz wifi, /* WRC-2533GST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
// but it's not supported in OpenWrt.
}; };
&xhci { &xhci {

6
target/linux/ramips/dts/Y1S.dts
View File

@@ -13,11 +13,11 @@
gpio_export { gpio_export {
compatible = "gpio-export"; compatible = "gpio-export";
#size-cells = <0>; #size-cells = <0>;
/* GPIO 54、55、56 USB1、2、3 */
usb0 { usb0 {
gpio-export,name = "usb0"; gpio-export,name = "usb0";
gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH gpio-export,output = <1>;
gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54 gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
}; };
usb1 { usb1 {
gpio-export,name = "usb1"; gpio-export,name = "usb1";