ramips: add support for ipTIME A3004NS-dual
ipTIME A3004NS-dual is a 2.4/5GHz band router, based on Mediatek MT7621. Specifications: - SoC: MT7621 (880MHz) - RAM: DDR3 256M - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: MT7602E - 5GHz : MT7612E - Ethernet: - 4x LAN - 1x WAN - USB: 1 * USB3.0 port - UART: - 3.3V, TX, RX, GND / 57600 8N1 Installation via web interface: - 1. Flash Initramfs image using OEM Firmware's web GUI - 2. Boot into OpenWrt and perform Sysupgrade with sysupgrade image. Revert to stock firmware: - 1. Boot into OpenWrt and perform Sysupgrade with OEM Stock Firmware image. Signed-off-by: Yuchan Seo <hexagonwin@disroot.org> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
		
							
								
								
									
										179
									
								
								target/linux/ramips/dts/mt7621_iptime_a3004ns-dual.dts
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										179
									
								
								target/linux/ramips/dts/mt7621_iptime_a3004ns-dual.dts
									
									
									
									
									
										Normal file
									
								
							@@ -0,0 +1,179 @@
 | 
			
		||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 | 
			
		||||
 | 
			
		||||
#include "mt7621.dtsi"
 | 
			
		||||
 | 
			
		||||
#include <dt-bindings/gpio/gpio.h>
 | 
			
		||||
#include <dt-bindings/input/input.h>
 | 
			
		||||
 | 
			
		||||
/ {
 | 
			
		||||
	compatible = "iptime,a3004ns-dual", "mediatek,mt7621-soc";
 | 
			
		||||
	model = "ipTIME A3004NS-dual";
 | 
			
		||||
 | 
			
		||||
	aliases {
 | 
			
		||||
		led-boot = &led_cpu;
 | 
			
		||||
		led-failsafe = &led_cpu;
 | 
			
		||||
		led-running = &led_cpu;
 | 
			
		||||
		led-upgrade = &led_cpu;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	leds {
 | 
			
		||||
		compatible = "gpio-leds";
 | 
			
		||||
 | 
			
		||||
		led_cpu: cpu {
 | 
			
		||||
			label = "blue:cpu";
 | 
			
		||||
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		usb {
 | 
			
		||||
			label = "blue:usb";
 | 
			
		||||
			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			trigger-sources = <&xhci_ehci_port1>;
 | 
			
		||||
			linux,default-trigger = "usbport";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	keys {
 | 
			
		||||
		compatible = "gpio-keys";
 | 
			
		||||
 | 
			
		||||
		reset {
 | 
			
		||||
			label = "reset";
 | 
			
		||||
			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_RESTART>;
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		wps {
 | 
			
		||||
			label = "wps";
 | 
			
		||||
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 | 
			
		||||
			linux,code = <KEY_WPS_BUTTON>;
 | 
			
		||||
		};
 | 
			
		||||
	 };
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&spi0 {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
 | 
			
		||||
	flash@0 {
 | 
			
		||||
		compatible = "jedec,spi-nor";
 | 
			
		||||
		reg = <0>;
 | 
			
		||||
		spi-max-frequency = <50000000>;
 | 
			
		||||
 | 
			
		||||
		partitions {
 | 
			
		||||
			compatible = "fixed-partitions";
 | 
			
		||||
			#address-cells = <1>;
 | 
			
		||||
			#size-cells = <1>;
 | 
			
		||||
 | 
			
		||||
			uboot: partition@0 {
 | 
			
		||||
				label = "u-boot";
 | 
			
		||||
				reg = <0x0 0x20000>;
 | 
			
		||||
				read-only;
 | 
			
		||||
			};
 | 
			
		||||
 | 
			
		||||
			partition@20000 {
 | 
			
		||||
				label = "config";
 | 
			
		||||
				reg = <0x20000 0x10000>;
 | 
			
		||||
				read-only;
 | 
			
		||||
			};
 | 
			
		||||
 | 
			
		||||
			factory: partition@30000 {
 | 
			
		||||
				label = "factory";
 | 
			
		||||
				reg = <0x30000 0x10000>;
 | 
			
		||||
				read-only;
 | 
			
		||||
			};
 | 
			
		||||
 | 
			
		||||
			partition@40000 {
 | 
			
		||||
				label = "firmware";
 | 
			
		||||
				reg = <0x40000 0xfc0000>;
 | 
			
		||||
				compatible = "denx,uimage";
 | 
			
		||||
			};
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&gmac0 {
 | 
			
		||||
	nvmem-cells = <&macaddr_uboot_1fc20>;
 | 
			
		||||
	nvmem-cell-names = "mac-address";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&switch0 {
 | 
			
		||||
	ports {
 | 
			
		||||
		port@0 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
			label = "wan";
 | 
			
		||||
			nvmem-cells = <&macaddr_uboot_1fc40>;
 | 
			
		||||
			nvmem-cell-names = "mac-address";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		port@1 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
			label = "lan1";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		port@2 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
			label = "lan2";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		port@3 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
			label = "lan3";
 | 
			
		||||
		};
 | 
			
		||||
 | 
			
		||||
		port@4 {
 | 
			
		||||
			status = "okay";
 | 
			
		||||
			label = "lan4";
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie {
 | 
			
		||||
	status = "okay";
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie0 {
 | 
			
		||||
	wifi@0,0 {
 | 
			
		||||
		compatible = "mediatek,mt76";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x8000>;
 | 
			
		||||
		ieee80211-freq-limit = <5000000 6000000>;
 | 
			
		||||
 | 
			
		||||
		led {
 | 
			
		||||
			led-sources = <2>;
 | 
			
		||||
			led-active-low;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&pcie1 {
 | 
			
		||||
	wifi@0,0 {
 | 
			
		||||
		compatible = "mediatek,mt76";
 | 
			
		||||
		reg = <0x0000 0 0 0 0>;
 | 
			
		||||
		mediatek,mtd-eeprom = <&factory 0x0000>;
 | 
			
		||||
		ieee80211-freq-limit = <2400000 2500000>;
 | 
			
		||||
 | 
			
		||||
		led {
 | 
			
		||||
			led-sources = <2>;
 | 
			
		||||
			led-active-low;
 | 
			
		||||
		};
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&state_default {
 | 
			
		||||
	gpio {
 | 
			
		||||
		groups = "wdt", "i2c", "uart3";
 | 
			
		||||
		function = "gpio";
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
 | 
			
		||||
&uboot {
 | 
			
		||||
	compatible = "nvmem-cells";
 | 
			
		||||
	#address-cells = <1>;
 | 
			
		||||
	#size-cells = <1>;
 | 
			
		||||
 | 
			
		||||
	macaddr_uboot_1fc20: macaddr@1fc20 {
 | 
			
		||||
		reg = <0x1fc20 0x6>;
 | 
			
		||||
	};
 | 
			
		||||
 | 
			
		||||
	macaddr_uboot_1fc40: macaddr@1fc40 {
 | 
			
		||||
		reg = <0x1fc40 0x6>;
 | 
			
		||||
	};
 | 
			
		||||
};
 | 
			
		||||
@@ -736,6 +736,17 @@ define Device/iodata_wnpr2600g
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += iodata_wnpr2600g
 | 
			
		||||
 | 
			
		||||
define Device/iptime_a3004ns-dual
 | 
			
		||||
  $(Device/dsa-migration)
 | 
			
		||||
  $(Device/uimage-lzma-loader)
 | 
			
		||||
  IMAGE_SIZE := 16128k
 | 
			
		||||
  UIMAGE_NAME := a3004nd
 | 
			
		||||
  DEVICE_VENDOR := ipTIME
 | 
			
		||||
  DEVICE_MODEL := A3004NS-dual
 | 
			
		||||
  DEVICE_PACKAGES := kmod-usb3 kmod-mt76x2 kmod-usb-ledtrig-usbport
 | 
			
		||||
endef
 | 
			
		||||
TARGET_DEVICES += iptime_a3004ns-dual
 | 
			
		||||
 | 
			
		||||
define Device/iptime_a6ns-m
 | 
			
		||||
  $(Device/dsa-migration)
 | 
			
		||||
  IMAGE_SIZE := 16128k
 | 
			
		||||
 
 | 
			
		||||
		Reference in New Issue
	
	Block a user