domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: add support for devolo WiFi pro 1200i

Browse Source 
Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
2019-01-01 19:17:23 +01:00
committed by Christian Lamparter
parent 8d68be8057
commit c8115167f9
4 changed files with 61 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ath79/base-files/etc/board.d/02_network
View File

@@ -10,6 +10,7 @@ ath79_setup_interfaces()
case "$board" in case "$board" in
avm,fritz300e|\ avm,fritz300e|\
devolo,dvl1200i|\
devolo,dvl1750c|\ devolo,dvl1750c|\
devolo,dvl1750i|\ devolo,dvl1750i|\
ocedo,koala|\ ocedo,koala|\

1
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -88,6 +88,7 @@ case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin") "ath10k/cal-pci-0000:00:00.0.bin")
case $board in case $board in
devolo,dvl1200e|\ devolo,dvl1200e|\
devolo,dvl1200i|\
devolo,dvl1750c|\ devolo,dvl1750c|\
devolo,dvl1750i) devolo,dvl1750i)
ath10kcal_extract "art" 20480 2116 ath10kcal_extract "art" 20480 2116

51
target/linux/ath79/dts/qca9558_devolo_dvl1200i.dts Normal file
View File

@@ -0,0 +1,51 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9558_devolo_dvl1xxx.dtsi"
/ {
compatible = "devolo,dvl1200i", "qca,qca9557";
model = "devolo WiFi pro 1200i";
aliases {
led-boot = &status_blue;
led-failsafe = &status_red;
led-running = &status_blue;
led-upgrade = &status_red;
};
leds {
compatible = "gpio-leds";
status_blue: status_blue {
label = "dvl1200i:blue:status";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
status_red: status_red {
label = "dvl1200i:red:status";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
beeper {
compatible = "gpio-beeper";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
};
&eth0 {
pll-data = <0xbe000000 0x80000101 0x80001313>;
};
&gmac_config {
rxdv-delay = <3>;
rxd-delay = <3>;
txen-delay = <3>;
txd-delay = <3>;
rgmii-enabled = <1>;
};

8
target/linux/ath79/image/generic.mk
View File

@@ -170,6 +170,14 @@ define Device/devolo_dvl1200e
endef endef
TARGET_DEVICES += devolo_dvl1200e TARGET_DEVICES += devolo_dvl1200e
define Device/devolo_dvl1200i
ATH_SOC := qca9558
DEVICE_TITLE := devolo WiFi pro 1200i
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
IMAGE_SIZE := 15936k
endef
TARGET_DEVICES += devolo_dvl1200i
define Device/devolo_dvl1750c define Device/devolo_dvl1750c
ATH_SOC := qca9558 ATH_SOC := qca9558
DEVICE_TITLE := devolo WiFi pro 1750c DEVICE_TITLE := devolo WiFi pro 1750c