ipq806x: add pcie support to ipq806x based platforms
This change adds PCIe support to IPQ806x based platforms. The driver is actually cherry-picked from the following LKML thread: *https://lwn.net/Articles/643086/ (patches 110-111) We also add here an additional fix to support multiple PCI controllers on the same platform (patch 112), and to patch the ap148 & dbs149 DTS files (patch 113). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45663
This commit is contained in:
Felix Fietkau
@@ -258,6 +258,11 @@ CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_QCOM=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
@@ -295,6 +300,7 @@ CONFIG_QCOM_BAM_DMA=y
|
||||
CONFIG_QCOM_GSBI=y
|
||||
CONFIG_QCOM_SCM=y
|
||||
CONFIG_QCOM_WDT=y
|
||||
CONFIG_RAS=y
|
||||
# CONFIG_RCU_BOOST is not set
|
||||
CONFIG_RCU_CPU_STALL_TIMEOUT=21
|
||||
CONFIG_RCU_CPU_STALL_VERBOSE=y
|
||||
|
||||
@@ -267,7 +267,14 @@ CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PCI=y
|
||||
# CONFIG_PCI_DOMAINS_GENERIC is not set
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCIE_QCOM=y
|
||||
CONFIG_PCI_DEBUG=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
@@ -307,6 +314,7 @@ CONFIG_QCOM_BAM_DMA=y
|
||||
CONFIG_QCOM_GSBI=y
|
||||
CONFIG_QCOM_SCM=y
|
||||
CONFIG_QCOM_WDT=y
|
||||
CONFIG_RAS=y
|
||||
# CONFIG_RCU_BOOST is not set
|
||||
CONFIG_RCU_CPU_STALL_TIMEOUT=21
|
||||
CONFIG_RCU_STALL_COMMON=y
|
||||
|
||||
@@ -0,0 +1,266 @@
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v2,3/5] DT: PCI: qcom: Document PCIe devicetree bindings
|
||||
From: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
X-Patchwork-Id: 6326181
|
||||
Message-Id: <1430743338-10441-4-git-send-email-svarbanov@mm-sol.com>
|
||||
To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
|
||||
Mark Rutland <mark.rutland@arm.com>,
|
||||
Grant Likely <grant.likely@linaro.org>,
|
||||
Bjorn Helgaas <bhelgaas@google.com>,
|
||||
Kishon Vijay Abraham I <kishon@ti.com>,
|
||||
Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
|
||||
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
|
||||
linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
|
||||
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
|
||||
Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
Date: Mon, 4 May 2015 15:42:16 +0300
|
||||
|
||||
Document Qualcomm PCIe driver devicetree bindings.
|
||||
|
||||
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
|
||||
---
|
||||
.../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++
|
||||
1 files changed, 231 insertions(+), 0 deletions(-)
|
||||
create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
|
||||
|
||||
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
|
||||
new file mode 100644
|
||||
index 0000000..dcf7348
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
|
||||
@@ -0,0 +1,231 @@
|
||||
+* Qualcomm PCI express root complex
|
||||
+
|
||||
+- compatible:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Value shall include
|
||||
+ - "qcom,pcie-v0" for apq/ipq8064
|
||||
+ - "qcom,pcie-v1" for apq8084
|
||||
+
|
||||
+- reg:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: Register ranges as listed in the reg-names property
|
||||
+
|
||||
+- reg-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Must include the following entries
|
||||
+ - "parf" Qualcomm specific registers
|
||||
+ - "dbi" Designware PCIe registers
|
||||
+ - "elbi" External local bus interface registers
|
||||
+ - "config" PCIe configuration space
|
||||
+
|
||||
+- device_type:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: Should be "pci". As specified in designware-pcie.txt
|
||||
+
|
||||
+- #address-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: Should be set to 3. As specified in designware-pcie.txt
|
||||
+
|
||||
+- #size-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: Should be set 2. As specified in designware-pcie.txt
|
||||
+
|
||||
+- ranges:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: As specified in designware-pcie.txt
|
||||
+
|
||||
+- interrupts:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: MSI interrupt
|
||||
+
|
||||
+- interrupt-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain "msi"
|
||||
+
|
||||
+- #interrupt-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: Should be 1. As specified in designware-pcie.txt
|
||||
+
|
||||
+- interrupt-map-mask:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: As specified in designware-pcie.txt
|
||||
+
|
||||
+- interrupt-map:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: As specified in designware-pcie.txt
|
||||
+
|
||||
+- clocks:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: List of phandle and clock specifier pairs as listed
|
||||
+ in clock-names property
|
||||
+
|
||||
+- clock-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain the following entries
|
||||
+ * should be populated for v0 and v1
|
||||
+ - "iface" Configuration AHB clock
|
||||
+
|
||||
+ * should be populated for v0
|
||||
+ - "core" Clocks the pcie hw block
|
||||
+ - "phy" Clocks the pcie PHY block
|
||||
+
|
||||
+ * should be populated for v1
|
||||
+ - "aux" Auxiliary (AUX) clock
|
||||
+ - "bus_master" Master AXI clock
|
||||
+ - "bus_slave" Slave AXI clock
|
||||
+
|
||||
+- resets:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: List of phandle and reset specifier pairs as listed
|
||||
+ in reset-names property
|
||||
+
|
||||
+- reset-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain the following entries
|
||||
+ * should be populated for v0
|
||||
+ - "axi" AXI reset
|
||||
+ - "ahb" AHB reset
|
||||
+ - "por" POR reset
|
||||
+ - "pci" PCI reset
|
||||
+ - "phy" PHY reset
|
||||
+
|
||||
+ * should be populated for v1
|
||||
+ - "core" Core reset
|
||||
+
|
||||
+- power-domains:
|
||||
+ Usage: required (for v1 only)
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: A phandle and power domain specifier pair to the
|
||||
+ power domain which is responsible for collapsing
|
||||
+ and restoring power to the peripheral
|
||||
+
|
||||
+- <name>-supply:
|
||||
+ Usage: required
|
||||
+ Value type: <phandle>
|
||||
+ Definition: List of phandles to the power supply regulator(s)
|
||||
+ * should be populated for v0 and v1
|
||||
+ - "vdda" core analog power supply
|
||||
+
|
||||
+ * should be populated for v0
|
||||
+ - "vdda_phy" analog power supply for PHY
|
||||
+ - "vdda_refclk" analog power supply for IC which generate
|
||||
+ reference clock
|
||||
+
|
||||
+- phys:
|
||||
+ Usage: required (for v1 only)
|
||||
+ Value type: <phandle>
|
||||
+ Definition: List of phandle(s) as listed in phy-names property
|
||||
+
|
||||
+- phy-names:
|
||||
+ Usage: required (for v1 only)
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain "pciephy"
|
||||
+
|
||||
+- <name>-gpio:
|
||||
+ Usage: optional
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: List of phandle and gpio specifier pairs. Should contain
|
||||
+ - "perst" PCIe endpoint reset signal line
|
||||
+ - "pewake" PCIe endpoint wake signal line
|
||||
+
|
||||
+- pinctrl-0:
|
||||
+ Usage: required
|
||||
+ Value type: <phandle>
|
||||
+ Definition: List of phandles pointing at a pin(s) configuration
|
||||
+
|
||||
+- pinctrl-names
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: List of names of pinctrl-0 state
|
||||
+
|
||||
+* Example for v0
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b500000 0x1000
|
||||
+ 0x1b502000 0x80
|
||||
+ 0x1b600000 0x100
|
||||
+ 0x0ff00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <0>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
||||
+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* memory */
|
||||
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+ clocks = <&gcc PCIE_A_CLK>,
|
||||
+ <&gcc PCIE_H_CLK>,
|
||||
+ <&gcc PCIE_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+ resets = <&gcc PCIE_ACLK_RESET>,
|
||||
+ <&gcc PCIE_HCLK_RESET>,
|
||||
+ <&gcc PCIE_POR_RESET>,
|
||||
+ <&gcc PCIE_PCI_RESET>,
|
||||
+ <&gcc PCIE_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+ };
|
||||
+
|
||||
+* Example for v1
|
||||
+ pcie0@fc520000 {
|
||||
+ compatible = "qcom,pcie-v1";
|
||||
+ reg = <0xfc520000 0x2000>,
|
||||
+ <0xff000000 0x1000>,
|
||||
+ <0xff001000 0x1000>,
|
||||
+ <0xff002000 0x2000>;
|
||||
+ reg-names = "parf", "dbi", "elbi", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <0>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
|
||||
+ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
|
||||
+ interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
|
||||
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
|
||||
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
|
||||
+ <&gcc GCC_PCIE_0_AUX_CLK>;
|
||||
+ clock-names = "iface", "master_bus", "slave_bus", "aux";
|
||||
+ resets = <&gcc GCC_PCIE_0_BCR>;
|
||||
+ reset-names = "core";
|
||||
+ power-domains = <&gcc PCIE0_GDSC>;
|
||||
+ vdda-supply = <&pma8084_l3>;
|
||||
+ phys = <&pciephy0>;
|
||||
+ phy-names = "pciephy";
|
||||
+ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
|
||||
+ pinctrl-0 = <&pcie0_pins_default>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
@@ -0,0 +1,753 @@
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver
|
||||
From: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
X-Patchwork-Id: 6326161
|
||||
Message-Id: <1430743338-10441-5-git-send-email-svarbanov@mm-sol.com>
|
||||
To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
|
||||
Mark Rutland <mark.rutland@arm.com>,
|
||||
Grant Likely <grant.likely@linaro.org>,
|
||||
Bjorn Helgaas <bhelgaas@google.com>,
|
||||
Kishon Vijay Abraham I <kishon@ti.com>,
|
||||
Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
|
||||
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
|
||||
linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
|
||||
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
|
||||
Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
Date: Mon, 4 May 2015 15:42:17 +0300
|
||||
|
||||
The PCIe driver reuse the Designware common code for host
|
||||
and MSI initialization, and also program the Qualcomm
|
||||
application specific registers.
|
||||
|
||||
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
|
||||
---
|
||||
MAINTAINERS | 7 +
|
||||
drivers/pci/host/Kconfig | 9 +
|
||||
drivers/pci/host/Makefile | 1 +
|
||||
drivers/pci/host/pcie-qcom.c | 677 ++++++++++++++++++++++++++++++++++++++++++
|
||||
4 files changed, 694 insertions(+), 0 deletions(-)
|
||||
create mode 100644 drivers/pci/host/pcie-qcom.c
|
||||
|
||||
--- a/MAINTAINERS
|
||||
+++ b/MAINTAINERS
|
||||
@@ -7127,6 +7127,13 @@ L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*spear*
|
||||
|
||||
+PCIE DRIVER FOR QUALCOMM MSM
|
||||
+M: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
+L: linux-pci@vger.kernel.org
|
||||
+L: linux-arm-msm@vger.kernel.org
|
||||
+S: Maintained
|
||||
+F: drivers/pci/host/*qcom*
|
||||
+
|
||||
PCMCIA SUBSYSTEM
|
||||
P: Linux PCMCIA Team
|
||||
L: linux-pcmcia@lists.infradead.org
|
||||
--- a/drivers/pci/host/Kconfig
|
||||
+++ b/drivers/pci/host/Kconfig
|
||||
@@ -91,4 +91,13 @@ config PCI_XGENE
|
||||
There are 5 internal PCIe ports available. Each port is GEN3 capable
|
||||
and have varied lanes from x1 to x8.
|
||||
|
||||
+config PCIE_QCOM
|
||||
+ bool "Qualcomm PCIe controller"
|
||||
+ depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST)
|
||||
+ select PCIE_DW
|
||||
+ select PCIEPORTBUS
|
||||
+ help
|
||||
+ Say Y here to enable PCIe controller support on Qualcomm SoCs. The
|
||||
+ PCIe controller use Designware core plus Qualcomm specific hardware
|
||||
+ wrappers.
|
||||
endmenu
|
||||
--- /dev/null
|
||||
+++ b/drivers/pci/host/pcie-qcom.c
|
||||
@@ -0,0 +1,677 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/gpio.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of_gpio.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/phy/phy.h>
|
||||
+#include <linux/regulator/consumer.h>
|
||||
+#include <linux/reset.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/types.h>
|
||||
+
|
||||
+#include "pcie-designware.h"
|
||||
+
|
||||
+#define PCIE20_PARF_PHY_CTRL 0x40
|
||||
+#define PCIE20_PARF_PHY_REFCLK 0x4C
|
||||
+#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
||||
+#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
|
||||
+#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
|
||||
+
|
||||
+#define PCIE20_ELBI_SYS_CTRL 0x04
|
||||
+#define PCIE20_ELBI_SYS_STTS 0x08
|
||||
+#define XMLH_LINK_UP BIT(10)
|
||||
+
|
||||
+#define PCIE20_CAP 0x70
|
||||
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
|
||||
+
|
||||
+#define PERST_DELAY_MIN_US 1000
|
||||
+#define PERST_DELAY_MAX_US 1005
|
||||
+
|
||||
+#define LINKUP_DELAY_MIN_US 5000
|
||||
+#define LINKUP_DELAY_MAX_US 5100
|
||||
+#define LINKUP_RETRIES_COUNT 20
|
||||
+
|
||||
+#define PCIE_V0 0 /* apq8064 */
|
||||
+#define PCIE_V1 1 /* apq8084 */
|
||||
+
|
||||
+struct qcom_pcie_resources_v0 {
|
||||
+ struct clk *iface_clk;
|
||||
+ struct clk *core_clk;
|
||||
+ struct clk *phy_clk;
|
||||
+ struct reset_control *pci_reset;
|
||||
+ struct reset_control *axi_reset;
|
||||
+ struct reset_control *ahb_reset;
|
||||
+ struct reset_control *por_reset;
|
||||
+ struct reset_control *phy_reset;
|
||||
+ struct regulator *vdda;
|
||||
+ struct regulator *vdda_phy;
|
||||
+ struct regulator *vdda_refclk;
|
||||
+};
|
||||
+
|
||||
+struct qcom_pcie_resources_v1 {
|
||||
+ struct clk *iface;
|
||||
+ struct clk *aux;
|
||||
+ struct clk *master_bus;
|
||||
+ struct clk *slave_bus;
|
||||
+ struct reset_control *core;
|
||||
+ struct regulator *vdda;
|
||||
+};
|
||||
+
|
||||
+union pcie_resources {
|
||||
+ struct qcom_pcie_resources_v0 v0;
|
||||
+ struct qcom_pcie_resources_v1 v1;
|
||||
+};
|
||||
+
|
||||
+struct qcom_pcie {
|
||||
+ struct pcie_port pp;
|
||||
+ struct device *dev;
|
||||
+ union pcie_resources res;
|
||||
+ void __iomem *parf;
|
||||
+ void __iomem *dbi;
|
||||
+ void __iomem *elbi;
|
||||
+ struct phy *phy;
|
||||
+ struct gpio_desc *reset;
|
||||
+ unsigned int version;
|
||||
+};
|
||||
+
|
||||
+#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
|
||||
+
|
||||
+static inline void
|
||||
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
|
||||
+{
|
||||
+ u32 val = readl(addr);
|
||||
+
|
||||
+ val &= ~clear_mask;
|
||||
+ val |= set_mask;
|
||||
+ writel(val, addr);
|
||||
+}
|
||||
+
|
||||
+static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
|
||||
+{
|
||||
+ int val, active_low;
|
||||
+
|
||||
+ if (IS_ERR_OR_NULL(pcie->reset))
|
||||
+ return;
|
||||
+
|
||||
+ active_low = gpiod_is_active_low(pcie->reset);
|
||||
+
|
||||
+ if (assert)
|
||||
+ val = !!active_low;
|
||||
+ else
|
||||
+ val = !active_low;
|
||||
+
|
||||
+ gpiod_set_value(pcie->reset, val);
|
||||
+
|
||||
+ usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
|
||||
+}
|
||||
+
|
||||
+static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ qcom_ep_reset_assert_deassert(pcie, 1);
|
||||
+}
|
||||
+
|
||||
+static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ qcom_ep_reset_assert_deassert(pcie, 0);
|
||||
+}
|
||||
+
|
||||
+static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
|
||||
+{
|
||||
+ struct pcie_port *pp = arg;
|
||||
+
|
||||
+ return dw_handle_msi_irq(pp);
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_link_up(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS);
|
||||
+
|
||||
+ return val & BIT(29) ? 1 : 0;
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+
|
||||
+ reset_control_assert(res->pci_reset);
|
||||
+ reset_control_assert(res->axi_reset);
|
||||
+ reset_control_assert(res->ahb_reset);
|
||||
+ reset_control_assert(res->por_reset);
|
||||
+ reset_control_assert(res->pci_reset);
|
||||
+ clk_disable_unprepare(res->iface_clk);
|
||||
+ clk_disable_unprepare(res->core_clk);
|
||||
+ clk_disable_unprepare(res->phy_clk);
|
||||
+ regulator_disable(res->vdda);
|
||||
+ regulator_disable(res->vdda_phy);
|
||||
+ regulator_disable(res->vdda_refclk);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
+
|
||||
+ reset_control_assert(res->core);
|
||||
+ clk_disable_unprepare(res->slave_bus);
|
||||
+ clk_disable_unprepare(res->master_bus);
|
||||
+ clk_disable_unprepare(res->iface);
|
||||
+ clk_disable_unprepare(res->aux);
|
||||
+ regulator_disable(res->vdda);
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda regulator\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda_refclk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda_refclk regulator\n");
|
||||
+ goto err_refclk;
|
||||
+ }
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda_phy);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda_phy regulator\n");
|
||||
+ goto err_vdda_phy;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->iface_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
+ goto err_iface;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->core_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable core clock\n");
|
||||
+ goto err_clk_core;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->phy_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable phy clock\n");
|
||||
+ goto err_clk_phy;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->ahb_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert ahb reset\n");
|
||||
+ goto err_reset_ahb;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_reset_ahb:
|
||||
+ clk_disable_unprepare(res->phy_clk);
|
||||
+err_clk_phy:
|
||||
+ clk_disable_unprepare(res->core_clk);
|
||||
+err_clk_core:
|
||||
+ clk_disable_unprepare(res->iface_clk);
|
||||
+err_iface:
|
||||
+ regulator_disable(res->vdda_phy);
|
||||
+err_vdda_phy:
|
||||
+ regulator_disable(res->vdda_refclk);
|
||||
+err_refclk:
|
||||
+ regulator_disable(res->vdda);
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ ret = reset_control_deassert(res->core);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert core reset\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->aux);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable aux clock\n");
|
||||
+ goto err_res;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->iface);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
+ goto err_aux;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->master_bus);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable master_bus clock\n");
|
||||
+ goto err_iface;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->slave_bus);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable slave_bus clock\n");
|
||||
+ goto err_master;
|
||||
+ }
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda regulator\n");
|
||||
+ goto err_slave;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_slave:
|
||||
+ clk_disable_unprepare(res->slave_bus);
|
||||
+err_master:
|
||||
+ clk_disable_unprepare(res->master_bus);
|
||||
+err_iface:
|
||||
+ clk_disable_unprepare(res->iface);
|
||||
+err_aux:
|
||||
+ clk_disable_unprepare(res->aux);
|
||||
+err_res:
|
||||
+ reset_control_assert(res->core);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+
|
||||
+ res->vdda = devm_regulator_get(dev, "vdda");
|
||||
+ if (IS_ERR(res->vdda))
|
||||
+ return PTR_ERR(res->vdda);
|
||||
+
|
||||
+ res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
|
||||
+ if (IS_ERR(res->vdda_phy))
|
||||
+ return PTR_ERR(res->vdda_phy);
|
||||
+
|
||||
+ res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
|
||||
+ if (IS_ERR(res->vdda_refclk))
|
||||
+ return PTR_ERR(res->vdda_refclk);
|
||||
+
|
||||
+ res->iface_clk = devm_clk_get(dev, "iface");
|
||||
+ if (IS_ERR(res->iface_clk))
|
||||
+ return PTR_ERR(res->iface_clk);
|
||||
+
|
||||
+ res->core_clk = devm_clk_get(dev, "core");
|
||||
+ if (IS_ERR(res->core_clk))
|
||||
+ return PTR_ERR(res->core_clk);
|
||||
+
|
||||
+ res->phy_clk = devm_clk_get(dev, "phy");
|
||||
+ if (IS_ERR(res->phy_clk))
|
||||
+ return PTR_ERR(res->phy_clk);
|
||||
+
|
||||
+ res->pci_reset = devm_reset_control_get(dev, "pci");
|
||||
+ if (IS_ERR(res->pci_reset))
|
||||
+ return PTR_ERR(res->pci_reset);
|
||||
+
|
||||
+ res->axi_reset = devm_reset_control_get(dev, "axi");
|
||||
+ if (IS_ERR(res->axi_reset))
|
||||
+ return PTR_ERR(res->axi_reset);
|
||||
+
|
||||
+ res->ahb_reset = devm_reset_control_get(dev, "ahb");
|
||||
+ if (IS_ERR(res->ahb_reset))
|
||||
+ return PTR_ERR(res->ahb_reset);
|
||||
+
|
||||
+ res->por_reset = devm_reset_control_get(dev, "por");
|
||||
+ if (IS_ERR(res->por_reset))
|
||||
+ return PTR_ERR(res->por_reset);
|
||||
+
|
||||
+ res->phy_reset = devm_reset_control_get(dev, "phy");
|
||||
+ if (IS_ERR(res->phy_reset))
|
||||
+ return PTR_ERR(res->phy_reset);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+
|
||||
+ res->vdda = devm_regulator_get(dev, "vdda");
|
||||
+ if (IS_ERR(res->vdda))
|
||||
+ return PTR_ERR(res->vdda);
|
||||
+
|
||||
+ res->iface = devm_clk_get(dev, "iface");
|
||||
+ if (IS_ERR(res->iface))
|
||||
+ return PTR_ERR(res->iface);
|
||||
+
|
||||
+ res->aux = devm_clk_get(dev, "aux");
|
||||
+ if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER)
|
||||
+ return -EPROBE_DEFER;
|
||||
+ else if (IS_ERR(res->aux))
|
||||
+ res->aux = NULL;
|
||||
+
|
||||
+ res->master_bus = devm_clk_get(dev, "master_bus");
|
||||
+ if (IS_ERR(res->master_bus))
|
||||
+ return PTR_ERR(res->master_bus);
|
||||
+
|
||||
+ res->slave_bus = devm_clk_get(dev, "slave_bus");
|
||||
+ if (IS_ERR(res->slave_bus))
|
||||
+ return PTR_ERR(res->slave_bus);
|
||||
+
|
||||
+ res->core = devm_reset_control_get(dev, "core");
|
||||
+ if (IS_ERR(res->core))
|
||||
+ return PTR_ERR(res->core);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_enable_link_training(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ struct device *dev = pp->dev;
|
||||
+ int retries;
|
||||
+ u32 val;
|
||||
+
|
||||
+ /* enable link training */
|
||||
+ writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0));
|
||||
+
|
||||
+ /* wait for up to 100ms for the link to come up */
|
||||
+ retries = LINKUP_RETRIES_COUNT;
|
||||
+ do {
|
||||
+ val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS);
|
||||
+ if (val & XMLH_LINK_UP)
|
||||
+ break;
|
||||
+ usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US);
|
||||
+ } while (retries--);
|
||||
+
|
||||
+ if (retries < 0 || !dw_pcie_link_up(pp)) {
|
||||
+ dev_err(dev, "link initialization failed\n");
|
||||
+ return -ENXIO;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_host_init_v1(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ int ret;
|
||||
+
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_resources_v1(pcie);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+
|
||||
+ /* change DBI base address */
|
||||
+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT,
|
||||
+ 0, BIT(31));
|
||||
+
|
||||
+ ret = phy_init(pcie->phy);
|
||||
+ if (ret)
|
||||
+ goto err_res;
|
||||
+
|
||||
+ ret = phy_power_on(pcie->phy);
|
||||
+ if (ret)
|
||||
+ goto err_phy;
|
||||
+
|
||||
+ dw_pcie_setup_rc(pp);
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
+ dw_pcie_msi_init(pp);
|
||||
+
|
||||
+ qcom_ep_reset_deassert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_link_training(pp);
|
||||
+ if (ret)
|
||||
+ goto err;
|
||||
+
|
||||
+ return;
|
||||
+
|
||||
+err:
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+ phy_power_off(pcie->phy);
|
||||
+err_phy:
|
||||
+ phy_exit(pcie->phy);
|
||||
+err_res:
|
||||
+ qcom_pcie_disable_resources_v1(pcie);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_host_init_v0(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_resources_v0(pcie);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
|
||||
+
|
||||
+ /* enable external reference clock */
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
|
||||
+
|
||||
+ ret = reset_control_deassert(res->phy_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert phy reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->pci_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert pci reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->por_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert por reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->axi_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert axi reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ /* wait 150ms for clock acquisition */
|
||||
+ usleep_range(10000, 15000);
|
||||
+
|
||||
+ dw_pcie_setup_rc(pp);
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
+ dw_pcie_msi_init(pp);
|
||||
+
|
||||
+ qcom_ep_reset_deassert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_link_training(pp);
|
||||
+ if (ret)
|
||||
+ goto err;
|
||||
+
|
||||
+ return;
|
||||
+err:
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+ qcom_pcie_disable_resources_v0(pcie);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_host_init(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+
|
||||
+ if (pcie->version == PCIE_V0)
|
||||
+ return qcom_pcie_host_init_v0(pp);
|
||||
+ else
|
||||
+ return qcom_pcie_host_init_v1(pp);
|
||||
+}
|
||||
+
|
||||
+static int
|
||||
+qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
|
||||
+{
|
||||
+ /* the device class is not reported correctly from the register */
|
||||
+ if (where == PCI_CLASS_REVISION && size == 4) {
|
||||
+ *val = readl(pp->dbi_base + PCI_CLASS_REVISION);
|
||||
+ *val &= ~(0xffff << 16);
|
||||
+ *val |= PCI_CLASS_BRIDGE_PCI << 16;
|
||||
+ return PCIBIOS_SUCCESSFUL;
|
||||
+ }
|
||||
+
|
||||
+ return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
|
||||
+ size, val);
|
||||
+}
|
||||
+
|
||||
+static struct pcie_host_ops qcom_pcie_ops = {
|
||||
+ .link_up = qcom_pcie_link_up,
|
||||
+ .host_init = qcom_pcie_host_init,
|
||||
+ .rd_own_conf = qcom_pcie_rd_own_conf,
|
||||
+};
|
||||
+
|
||||
+static const struct of_device_id qcom_pcie_match[] = {
|
||||
+ { .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 },
|
||||
+ { .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 },
|
||||
+ { }
|
||||
+};
|
||||
+
|
||||
+static int qcom_pcie_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ const struct of_device_id *match;
|
||||
+ struct resource *res;
|
||||
+ struct qcom_pcie *pcie;
|
||||
+ struct pcie_port *pp;
|
||||
+ int ret;
|
||||
+
|
||||
+ match = of_match_node(qcom_pcie_match, dev->of_node);
|
||||
+ if (!match)
|
||||
+ return -ENXIO;
|
||||
+
|
||||
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
|
||||
+ if (!pcie)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ pcie->version = (unsigned int)match->data;
|
||||
+
|
||||
+ pcie->reset = devm_gpiod_get_optional(dev, "perst");
|
||||
+ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
|
||||
+ return PTR_ERR(pcie->reset);
|
||||
+
|
||||
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
|
||||
+ pcie->parf = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(pcie->parf))
|
||||
+ return PTR_ERR(pcie->parf);
|
||||
+
|
||||
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
|
||||
+ pcie->dbi = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(pcie->dbi))
|
||||
+ return PTR_ERR(pcie->dbi);
|
||||
+
|
||||
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
|
||||
+ pcie->elbi = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(pcie->elbi))
|
||||
+ return PTR_ERR(pcie->elbi);
|
||||
+
|
||||
+ pcie->phy = devm_phy_optional_get(dev, "pciephy");
|
||||
+ if (IS_ERR(pcie->phy))
|
||||
+ return PTR_ERR(pcie->phy);
|
||||
+
|
||||
+ pcie->dev = dev;
|
||||
+
|
||||
+ if (pcie->version == PCIE_V0)
|
||||
+ ret = qcom_pcie_get_resources_v0(pcie);
|
||||
+ else
|
||||
+ ret = qcom_pcie_get_resources_v1(pcie);
|
||||
+
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ pp = &pcie->pp;
|
||||
+ pp->dev = dev;
|
||||
+ pp->dbi_base = pcie->dbi;
|
||||
+ pp->root_bus_nr = -1;
|
||||
+ pp->ops = &qcom_pcie_ops;
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
||||
+ pp->msi_irq = platform_get_irq_byname(pdev, "msi");
|
||||
+ if (pp->msi_irq < 0) {
|
||||
+ dev_err(dev, "cannot get msi irq\n");
|
||||
+ return pp->msi_irq;
|
||||
+ }
|
||||
+
|
||||
+ ret = devm_request_irq(dev, pp->msi_irq,
|
||||
+ qcom_pcie_msi_irq_handler,
|
||||
+ IRQF_SHARED, "qcom-pcie-msi", pp);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot request msi irq\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ ret = dw_pcie_host_init(pp);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot initialize host\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ platform_set_drvdata(pdev, pcie);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = platform_get_drvdata(pdev);
|
||||
+
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+ phy_power_off(pcie->phy);
|
||||
+ phy_exit(pcie->phy);
|
||||
+ if (pcie->version == PCIE_V0)
|
||||
+ qcom_pcie_disable_resources_v0(pcie);
|
||||
+ else
|
||||
+ qcom_pcie_disable_resources_v1(pcie);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver qcom_pcie_driver = {
|
||||
+ .probe = qcom_pcie_probe,
|
||||
+ .remove = qcom_pcie_remove,
|
||||
+ .driver = {
|
||||
+ .name = "qcom-pcie",
|
||||
+ .of_match_table = qcom_pcie_match,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(qcom_pcie_driver);
|
||||
+
|
||||
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
|
||||
+MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_ALIAS("platform:qcom-pcie");
|
||||
--- a/drivers/pci/host/Makefile
|
||||
+++ b/drivers/pci/host/Makefile
|
||||
@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe
|
||||
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
|
||||
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
|
||||
obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
|
||||
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
|
||||
@@ -0,0 +1,268 @@
|
||||
From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Tue, 21 Apr 2015 19:01:42 -0700
|
||||
Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms
|
||||
|
||||
qcom-pcie driver now supports version 0 of the controller. This change
|
||||
adds the corresponding entries to the IPQ806x dtsi file and
|
||||
corresponding platform (AP148).
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
---
|
||||
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++
|
||||
arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++
|
||||
2 files changed, 154 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
||||
@@ -30,6 +30,22 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
+ pcie1_pins: pcie1_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio3";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie2_pins: pcie2_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio48";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
@@ -136,5 +152,19 @@
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
};
|
||||
+
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 3 0>;
|
||||
+ pinctrl-0 = <&pcie1_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pci@1b700000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 48 0>;
|
||||
+ pinctrl-0 = <&pcie2_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
};
|
||||
};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
||||
@@ -37,6 +37,30 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
+ pcie1_pins: pcie1_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio3";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie2_pins: pcie2_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio48";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie3_pins: pcie3_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio63";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
@@ -153,6 +177,27 @@
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 3 0>;
|
||||
+ pinctrl-0 = <&pcie1_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pci@1b700000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 48 0>;
|
||||
+ pinctrl-0 = <&pcie2_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
+ pcie2: pci@1b900000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 63 0>;
|
||||
+ pinctrl-0 = <&pcie3_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -3,6 +3,7 @@
|
||||
#include "skeleton.dtsi"
|
||||
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064";
|
||||
@@ -306,6 +307,129 @@
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b500000 0x1000
|
||||
+ 0x1b502000 0x80
|
||||
+ 0x1b600000 0x100
|
||||
+ 0x0ff00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <0>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* downstream I/O */
|
||||
+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
|
||||
+
|
||||
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+
|
||||
+ clocks = <&gcc PCIE_A_CLK>,
|
||||
+ <&gcc PCIE_H_CLK>,
|
||||
+ <&gcc PCIE_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+
|
||||
+ resets = <&gcc PCIE_ACLK_RESET>,
|
||||
+ <&gcc PCIE_HCLK_RESET>,
|
||||
+ <&gcc PCIE_POR_RESET>,
|
||||
+ <&gcc PCIE_PCI_RESET>,
|
||||
+ <&gcc PCIE_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pci@1b700000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b700000 0x1000
|
||||
+ 0x1b702000 0x80
|
||||
+ 0x1b800000 0x100
|
||||
+ 0x31f00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <1>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ ranges = <0x81000000 0 0 0x31e00000 0 0x00100000 /* downstream I/O */
|
||||
+ 0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
|
||||
+
|
||||
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+
|
||||
+ clocks = <&gcc PCIE_1_A_CLK>,
|
||||
+ <&gcc PCIE_1_H_CLK>,
|
||||
+ <&gcc PCIE_1_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+
|
||||
+ resets = <&gcc PCIE_1_ACLK_RESET>,
|
||||
+ <&gcc PCIE_1_HCLK_RESET>,
|
||||
+ <&gcc PCIE_1_POR_RESET>,
|
||||
+ <&gcc PCIE_1_PCI_RESET>,
|
||||
+ <&gcc PCIE_1_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ pcie2: pci@1b900000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b900000 0x1000
|
||||
+ 0x1b902000 0x80
|
||||
+ 0x1ba00000 0x100
|
||||
+ 0x35f00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <2>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ ranges = <0x81000000 0 0 0x35e00000 0 0x00100000 /* downstream I/O */
|
||||
+ 0x82000000 0 0x00000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
|
||||
+
|
||||
+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+
|
||||
+ clocks = <&gcc PCIE_2_A_CLK>,
|
||||
+ <&gcc PCIE_2_H_CLK>,
|
||||
+ <&gcc PCIE_2_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+
|
||||
+ resets = <&gcc PCIE_2_ACLK_RESET>,
|
||||
+ <&gcc PCIE_2_HCLK_RESET>,
|
||||
+ <&gcc PCIE_2_POR_RESET>,
|
||||
+ <&gcc PCIE_2_PCI_RESET>,
|
||||
+ <&gcc PCIE_2_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
hs_phy_1: phy@100f8800 {
|
||||
compatible = "qcom,dwc3-hs-usb-phy";
|
||||
reg = <0x100f8800 0x30>;
|
||||
@@ -389,6 +513,5 @@
|
||||
dr_mode = "host";
|
||||
};
|
||||
};
|
||||
-
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,29 @@
|
||||
From f004aa1dec6e2e206be025de15b115d60f2b21e3 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Tue, 21 Apr 2015 19:09:07 -0700
|
||||
Subject: [PATCH 9/9] ARM: qcom: automatically select PCI_DOMAINS if PCI is
|
||||
enabled
|
||||
|
||||
If multiple PCIe devices are present in the system, the kernel will
|
||||
panic at boot time when trying to scan the PCI buses. This happens on
|
||||
IPQ806x based platforms, which has 3 PCIe ports.
|
||||
|
||||
Enabling this option allows the kernel to assign the pci-domains
|
||||
according to the device-tree content. This allows multiple PCIe
|
||||
controllers to coexist in the system.
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
---
|
||||
arch/arm/mach-qcom/Kconfig | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
--- a/arch/arm/mach-qcom/Kconfig
|
||||
+++ b/arch/arm/mach-qcom/Kconfig
|
||||
@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
|
||||
select CLKSRC_OF
|
||||
select PINCTRL
|
||||
select QCOM_SCM if SMP
|
||||
+ select PCI_DOMAINS if PCI
|
||||
help
|
||||
Support for Qualcomm's devicetree based systems.
|
||||
|
||||
@@ -16,7 +16,7 @@
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
@@ -38,6 +45,25 @@
|
||||
@@ -54,6 +61,25 @@
|
||||
bias-none;
|
||||
};
|
||||
};
|
||||
@@ -42,7 +42,7 @@
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
@@ -76,6 +102,7 @@
|
||||
@@ -92,6 +118,7 @@
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
@@ -50,9 +50,9 @@
|
||||
|
||||
partition@0 {
|
||||
label = "lowlevel_init";
|
||||
@@ -136,5 +163,66 @@
|
||||
usb30@1 {
|
||||
status = "ok";
|
||||
@@ -166,5 +193,66 @@
|
||||
pinctrl-0 = <&pcie2_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
+
|
||||
+ mdio0: mdio {
|
||||
@@ -119,18 +119,19 @@
|
||||
};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -3,6 +3,7 @@
|
||||
#include "skeleton.dtsi"
|
||||
@@ -4,6 +4,7 @@
|
||||
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
||||
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064";
|
||||
@@ -390,5 +391,41 @@
|
||||
@@ -513,5 +514,42 @@
|
||||
dr_mode = "host";
|
||||
};
|
||||
};
|
||||
|
||||
+
|
||||
+ nss-gmac-common {
|
||||
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
|
||||
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
|
||||
|
||||
@@ -0,0 +1,266 @@
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v2,3/5] DT: PCI: qcom: Document PCIe devicetree bindings
|
||||
From: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
X-Patchwork-Id: 6326181
|
||||
Message-Id: <1430743338-10441-4-git-send-email-svarbanov@mm-sol.com>
|
||||
To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
|
||||
Mark Rutland <mark.rutland@arm.com>,
|
||||
Grant Likely <grant.likely@linaro.org>,
|
||||
Bjorn Helgaas <bhelgaas@google.com>,
|
||||
Kishon Vijay Abraham I <kishon@ti.com>,
|
||||
Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
|
||||
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
|
||||
linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
|
||||
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
|
||||
Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
Date: Mon, 4 May 2015 15:42:16 +0300
|
||||
|
||||
Document Qualcomm PCIe driver devicetree bindings.
|
||||
|
||||
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
|
||||
---
|
||||
.../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++
|
||||
1 files changed, 231 insertions(+), 0 deletions(-)
|
||||
create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
|
||||
|
||||
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
|
||||
new file mode 100644
|
||||
index 0000000..dcf7348
|
||||
--- /dev/null
|
||||
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
|
||||
@@ -0,0 +1,231 @@
|
||||
+* Qualcomm PCI express root complex
|
||||
+
|
||||
+- compatible:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Value shall include
|
||||
+ - "qcom,pcie-v0" for apq/ipq8064
|
||||
+ - "qcom,pcie-v1" for apq8084
|
||||
+
|
||||
+- reg:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: Register ranges as listed in the reg-names property
|
||||
+
|
||||
+- reg-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Must include the following entries
|
||||
+ - "parf" Qualcomm specific registers
|
||||
+ - "dbi" Designware PCIe registers
|
||||
+ - "elbi" External local bus interface registers
|
||||
+ - "config" PCIe configuration space
|
||||
+
|
||||
+- device_type:
|
||||
+ Usage: required
|
||||
+ Value type: <string>
|
||||
+ Definition: Should be "pci". As specified in designware-pcie.txt
|
||||
+
|
||||
+- #address-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: Should be set to 3. As specified in designware-pcie.txt
|
||||
+
|
||||
+- #size-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: Should be set 2. As specified in designware-pcie.txt
|
||||
+
|
||||
+- ranges:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: As specified in designware-pcie.txt
|
||||
+
|
||||
+- interrupts:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: MSI interrupt
|
||||
+
|
||||
+- interrupt-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain "msi"
|
||||
+
|
||||
+- #interrupt-cells:
|
||||
+ Usage: required
|
||||
+ Value type: <u32>
|
||||
+ Definition: Should be 1. As specified in designware-pcie.txt
|
||||
+
|
||||
+- interrupt-map-mask:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: As specified in designware-pcie.txt
|
||||
+
|
||||
+- interrupt-map:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: As specified in designware-pcie.txt
|
||||
+
|
||||
+- clocks:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: List of phandle and clock specifier pairs as listed
|
||||
+ in clock-names property
|
||||
+
|
||||
+- clock-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain the following entries
|
||||
+ * should be populated for v0 and v1
|
||||
+ - "iface" Configuration AHB clock
|
||||
+
|
||||
+ * should be populated for v0
|
||||
+ - "core" Clocks the pcie hw block
|
||||
+ - "phy" Clocks the pcie PHY block
|
||||
+
|
||||
+ * should be populated for v1
|
||||
+ - "aux" Auxiliary (AUX) clock
|
||||
+ - "bus_master" Master AXI clock
|
||||
+ - "bus_slave" Slave AXI clock
|
||||
+
|
||||
+- resets:
|
||||
+ Usage: required
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: List of phandle and reset specifier pairs as listed
|
||||
+ in reset-names property
|
||||
+
|
||||
+- reset-names:
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain the following entries
|
||||
+ * should be populated for v0
|
||||
+ - "axi" AXI reset
|
||||
+ - "ahb" AHB reset
|
||||
+ - "por" POR reset
|
||||
+ - "pci" PCI reset
|
||||
+ - "phy" PHY reset
|
||||
+
|
||||
+ * should be populated for v1
|
||||
+ - "core" Core reset
|
||||
+
|
||||
+- power-domains:
|
||||
+ Usage: required (for v1 only)
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: A phandle and power domain specifier pair to the
|
||||
+ power domain which is responsible for collapsing
|
||||
+ and restoring power to the peripheral
|
||||
+
|
||||
+- <name>-supply:
|
||||
+ Usage: required
|
||||
+ Value type: <phandle>
|
||||
+ Definition: List of phandles to the power supply regulator(s)
|
||||
+ * should be populated for v0 and v1
|
||||
+ - "vdda" core analog power supply
|
||||
+
|
||||
+ * should be populated for v0
|
||||
+ - "vdda_phy" analog power supply for PHY
|
||||
+ - "vdda_refclk" analog power supply for IC which generate
|
||||
+ reference clock
|
||||
+
|
||||
+- phys:
|
||||
+ Usage: required (for v1 only)
|
||||
+ Value type: <phandle>
|
||||
+ Definition: List of phandle(s) as listed in phy-names property
|
||||
+
|
||||
+- phy-names:
|
||||
+ Usage: required (for v1 only)
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: Should contain "pciephy"
|
||||
+
|
||||
+- <name>-gpio:
|
||||
+ Usage: optional
|
||||
+ Value type: <prop-encoded-array>
|
||||
+ Definition: List of phandle and gpio specifier pairs. Should contain
|
||||
+ - "perst" PCIe endpoint reset signal line
|
||||
+ - "pewake" PCIe endpoint wake signal line
|
||||
+
|
||||
+- pinctrl-0:
|
||||
+ Usage: required
|
||||
+ Value type: <phandle>
|
||||
+ Definition: List of phandles pointing at a pin(s) configuration
|
||||
+
|
||||
+- pinctrl-names
|
||||
+ Usage: required
|
||||
+ Value type: <stringlist>
|
||||
+ Definition: List of names of pinctrl-0 state
|
||||
+
|
||||
+* Example for v0
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b500000 0x1000
|
||||
+ 0x1b502000 0x80
|
||||
+ 0x1b600000 0x100
|
||||
+ 0x0ff00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <0>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
||||
+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* memory */
|
||||
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+ clocks = <&gcc PCIE_A_CLK>,
|
||||
+ <&gcc PCIE_H_CLK>,
|
||||
+ <&gcc PCIE_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+ resets = <&gcc PCIE_ACLK_RESET>,
|
||||
+ <&gcc PCIE_HCLK_RESET>,
|
||||
+ <&gcc PCIE_POR_RESET>,
|
||||
+ <&gcc PCIE_PCI_RESET>,
|
||||
+ <&gcc PCIE_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+ };
|
||||
+
|
||||
+* Example for v1
|
||||
+ pcie0@fc520000 {
|
||||
+ compatible = "qcom,pcie-v1";
|
||||
+ reg = <0xfc520000 0x2000>,
|
||||
+ <0xff000000 0x1000>,
|
||||
+ <0xff001000 0x1000>,
|
||||
+ <0xff002000 0x2000>;
|
||||
+ reg-names = "parf", "dbi", "elbi", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <0>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
|
||||
+ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
|
||||
+ interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
|
||||
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
|
||||
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
|
||||
+ <&gcc GCC_PCIE_0_AUX_CLK>;
|
||||
+ clock-names = "iface", "master_bus", "slave_bus", "aux";
|
||||
+ resets = <&gcc GCC_PCIE_0_BCR>;
|
||||
+ reset-names = "core";
|
||||
+ power-domains = <&gcc PCIE0_GDSC>;
|
||||
+ vdda-supply = <&pma8084_l3>;
|
||||
+ phys = <&pciephy0>;
|
||||
+ phy-names = "pciephy";
|
||||
+ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
|
||||
+ pinctrl-0 = <&pcie0_pins_default>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
@@ -0,0 +1,753 @@
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [v2,4/5] PCI: qcom: Add Qualcomm PCIe controller driver
|
||||
From: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
X-Patchwork-Id: 6326161
|
||||
Message-Id: <1430743338-10441-5-git-send-email-svarbanov@mm-sol.com>
|
||||
To: Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>,
|
||||
Mark Rutland <mark.rutland@arm.com>,
|
||||
Grant Likely <grant.likely@linaro.org>,
|
||||
Bjorn Helgaas <bhelgaas@google.com>,
|
||||
Kishon Vijay Abraham I <kishon@ti.com>,
|
||||
Russell King <linux@arm.linux.org.uk>, Arnd Bergmann <arnd@arndb.de>
|
||||
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
|
||||
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
|
||||
linux-pci@vger.kernel.org, Mathieu Olivari <mathieu@codeaurora.org>,
|
||||
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
|
||||
Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
Date: Mon, 4 May 2015 15:42:17 +0300
|
||||
|
||||
The PCIe driver reuse the Designware common code for host
|
||||
and MSI initialization, and also program the Qualcomm
|
||||
application specific registers.
|
||||
|
||||
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
|
||||
---
|
||||
MAINTAINERS | 7 +
|
||||
drivers/pci/host/Kconfig | 9 +
|
||||
drivers/pci/host/Makefile | 1 +
|
||||
drivers/pci/host/pcie-qcom.c | 677 ++++++++++++++++++++++++++++++++++++++++++
|
||||
4 files changed, 694 insertions(+), 0 deletions(-)
|
||||
create mode 100644 drivers/pci/host/pcie-qcom.c
|
||||
|
||||
--- a/MAINTAINERS
|
||||
+++ b/MAINTAINERS
|
||||
@@ -7511,6 +7511,13 @@ L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*spear*
|
||||
|
||||
+PCIE DRIVER FOR QUALCOMM MSM
|
||||
+M: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
+L: linux-pci@vger.kernel.org
|
||||
+L: linux-arm-msm@vger.kernel.org
|
||||
+S: Maintained
|
||||
+F: drivers/pci/host/*qcom*
|
||||
+
|
||||
PCMCIA SUBSYSTEM
|
||||
P: Linux PCMCIA Team
|
||||
L: linux-pcmcia@lists.infradead.org
|
||||
--- a/drivers/pci/host/Kconfig
|
||||
+++ b/drivers/pci/host/Kconfig
|
||||
@@ -106,4 +106,13 @@ config PCI_VERSATILE
|
||||
bool "ARM Versatile PB PCI controller"
|
||||
depends on ARCH_VERSATILE
|
||||
|
||||
+config PCIE_QCOM
|
||||
+ bool "Qualcomm PCIe controller"
|
||||
+ depends on ARCH_QCOM && OF || (ARM && COMPILE_TEST)
|
||||
+ select PCIE_DW
|
||||
+ select PCIEPORTBUS
|
||||
+ help
|
||||
+ Say Y here to enable PCIe controller support on Qualcomm SoCs. The
|
||||
+ PCIe controller use Designware core plus Qualcomm specific hardware
|
||||
+ wrappers.
|
||||
endmenu
|
||||
--- /dev/null
|
||||
+++ b/drivers/pci/host/pcie-qcom.c
|
||||
@@ -0,0 +1,677 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 and
|
||||
+ * only version 2 as published by the Free Software Foundation.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/gpio.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/io.h>
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/of_gpio.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/phy/phy.h>
|
||||
+#include <linux/regulator/consumer.h>
|
||||
+#include <linux/reset.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/types.h>
|
||||
+
|
||||
+#include "pcie-designware.h"
|
||||
+
|
||||
+#define PCIE20_PARF_PHY_CTRL 0x40
|
||||
+#define PCIE20_PARF_PHY_REFCLK 0x4C
|
||||
+#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
||||
+#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
|
||||
+#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
|
||||
+
|
||||
+#define PCIE20_ELBI_SYS_CTRL 0x04
|
||||
+#define PCIE20_ELBI_SYS_STTS 0x08
|
||||
+#define XMLH_LINK_UP BIT(10)
|
||||
+
|
||||
+#define PCIE20_CAP 0x70
|
||||
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
|
||||
+
|
||||
+#define PERST_DELAY_MIN_US 1000
|
||||
+#define PERST_DELAY_MAX_US 1005
|
||||
+
|
||||
+#define LINKUP_DELAY_MIN_US 5000
|
||||
+#define LINKUP_DELAY_MAX_US 5100
|
||||
+#define LINKUP_RETRIES_COUNT 20
|
||||
+
|
||||
+#define PCIE_V0 0 /* apq8064 */
|
||||
+#define PCIE_V1 1 /* apq8084 */
|
||||
+
|
||||
+struct qcom_pcie_resources_v0 {
|
||||
+ struct clk *iface_clk;
|
||||
+ struct clk *core_clk;
|
||||
+ struct clk *phy_clk;
|
||||
+ struct reset_control *pci_reset;
|
||||
+ struct reset_control *axi_reset;
|
||||
+ struct reset_control *ahb_reset;
|
||||
+ struct reset_control *por_reset;
|
||||
+ struct reset_control *phy_reset;
|
||||
+ struct regulator *vdda;
|
||||
+ struct regulator *vdda_phy;
|
||||
+ struct regulator *vdda_refclk;
|
||||
+};
|
||||
+
|
||||
+struct qcom_pcie_resources_v1 {
|
||||
+ struct clk *iface;
|
||||
+ struct clk *aux;
|
||||
+ struct clk *master_bus;
|
||||
+ struct clk *slave_bus;
|
||||
+ struct reset_control *core;
|
||||
+ struct regulator *vdda;
|
||||
+};
|
||||
+
|
||||
+union pcie_resources {
|
||||
+ struct qcom_pcie_resources_v0 v0;
|
||||
+ struct qcom_pcie_resources_v1 v1;
|
||||
+};
|
||||
+
|
||||
+struct qcom_pcie {
|
||||
+ struct pcie_port pp;
|
||||
+ struct device *dev;
|
||||
+ union pcie_resources res;
|
||||
+ void __iomem *parf;
|
||||
+ void __iomem *dbi;
|
||||
+ void __iomem *elbi;
|
||||
+ struct phy *phy;
|
||||
+ struct gpio_desc *reset;
|
||||
+ unsigned int version;
|
||||
+};
|
||||
+
|
||||
+#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
|
||||
+
|
||||
+static inline void
|
||||
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
|
||||
+{
|
||||
+ u32 val = readl(addr);
|
||||
+
|
||||
+ val &= ~clear_mask;
|
||||
+ val |= set_mask;
|
||||
+ writel(val, addr);
|
||||
+}
|
||||
+
|
||||
+static void qcom_ep_reset_assert_deassert(struct qcom_pcie *pcie, int assert)
|
||||
+{
|
||||
+ int val, active_low;
|
||||
+
|
||||
+ if (IS_ERR_OR_NULL(pcie->reset))
|
||||
+ return;
|
||||
+
|
||||
+ active_low = gpiod_is_active_low(pcie->reset);
|
||||
+
|
||||
+ if (assert)
|
||||
+ val = !!active_low;
|
||||
+ else
|
||||
+ val = !active_low;
|
||||
+
|
||||
+ gpiod_set_value(pcie->reset, val);
|
||||
+
|
||||
+ usleep_range(PERST_DELAY_MIN_US, PERST_DELAY_MAX_US);
|
||||
+}
|
||||
+
|
||||
+static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ qcom_ep_reset_assert_deassert(pcie, 1);
|
||||
+}
|
||||
+
|
||||
+static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ qcom_ep_reset_assert_deassert(pcie, 0);
|
||||
+}
|
||||
+
|
||||
+static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
|
||||
+{
|
||||
+ struct pcie_port *pp = arg;
|
||||
+
|
||||
+ return dw_handle_msi_irq(pp);
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_link_up(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ u32 val = readl(pcie->dbi + PCIE20_CAP_LINKCTRLSTATUS);
|
||||
+
|
||||
+ return val & BIT(29) ? 1 : 0;
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_disable_resources_v0(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+
|
||||
+ reset_control_assert(res->pci_reset);
|
||||
+ reset_control_assert(res->axi_reset);
|
||||
+ reset_control_assert(res->ahb_reset);
|
||||
+ reset_control_assert(res->por_reset);
|
||||
+ reset_control_assert(res->pci_reset);
|
||||
+ clk_disable_unprepare(res->iface_clk);
|
||||
+ clk_disable_unprepare(res->core_clk);
|
||||
+ clk_disable_unprepare(res->phy_clk);
|
||||
+ regulator_disable(res->vdda);
|
||||
+ regulator_disable(res->vdda_phy);
|
||||
+ regulator_disable(res->vdda_refclk);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_disable_resources_v1(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
+
|
||||
+ reset_control_assert(res->core);
|
||||
+ clk_disable_unprepare(res->slave_bus);
|
||||
+ clk_disable_unprepare(res->master_bus);
|
||||
+ clk_disable_unprepare(res->iface);
|
||||
+ clk_disable_unprepare(res->aux);
|
||||
+ regulator_disable(res->vdda);
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_enable_resources_v0(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda regulator\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda_refclk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda_refclk regulator\n");
|
||||
+ goto err_refclk;
|
||||
+ }
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda_phy);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda_phy regulator\n");
|
||||
+ goto err_vdda_phy;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->iface_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
+ goto err_iface;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->core_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable core clock\n");
|
||||
+ goto err_clk_core;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->phy_clk);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable phy clock\n");
|
||||
+ goto err_clk_phy;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->ahb_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert ahb reset\n");
|
||||
+ goto err_reset_ahb;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_reset_ahb:
|
||||
+ clk_disable_unprepare(res->phy_clk);
|
||||
+err_clk_phy:
|
||||
+ clk_disable_unprepare(res->core_clk);
|
||||
+err_clk_core:
|
||||
+ clk_disable_unprepare(res->iface_clk);
|
||||
+err_iface:
|
||||
+ regulator_disable(res->vdda_phy);
|
||||
+err_vdda_phy:
|
||||
+ regulator_disable(res->vdda_refclk);
|
||||
+err_refclk:
|
||||
+ regulator_disable(res->vdda);
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_enable_resources_v1(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ ret = reset_control_deassert(res->core);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert core reset\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->aux);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable aux clock\n");
|
||||
+ goto err_res;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->iface);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
+ goto err_aux;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->master_bus);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable master_bus clock\n");
|
||||
+ goto err_iface;
|
||||
+ }
|
||||
+
|
||||
+ ret = clk_prepare_enable(res->slave_bus);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot prepare/enable slave_bus clock\n");
|
||||
+ goto err_master;
|
||||
+ }
|
||||
+
|
||||
+ ret = regulator_enable(res->vdda);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot enable vdda regulator\n");
|
||||
+ goto err_slave;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_slave:
|
||||
+ clk_disable_unprepare(res->slave_bus);
|
||||
+err_master:
|
||||
+ clk_disable_unprepare(res->master_bus);
|
||||
+err_iface:
|
||||
+ clk_disable_unprepare(res->iface);
|
||||
+err_aux:
|
||||
+ clk_disable_unprepare(res->aux);
|
||||
+err_res:
|
||||
+ reset_control_assert(res->core);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+
|
||||
+ res->vdda = devm_regulator_get(dev, "vdda");
|
||||
+ if (IS_ERR(res->vdda))
|
||||
+ return PTR_ERR(res->vdda);
|
||||
+
|
||||
+ res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
|
||||
+ if (IS_ERR(res->vdda_phy))
|
||||
+ return PTR_ERR(res->vdda_phy);
|
||||
+
|
||||
+ res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
|
||||
+ if (IS_ERR(res->vdda_refclk))
|
||||
+ return PTR_ERR(res->vdda_refclk);
|
||||
+
|
||||
+ res->iface_clk = devm_clk_get(dev, "iface");
|
||||
+ if (IS_ERR(res->iface_clk))
|
||||
+ return PTR_ERR(res->iface_clk);
|
||||
+
|
||||
+ res->core_clk = devm_clk_get(dev, "core");
|
||||
+ if (IS_ERR(res->core_clk))
|
||||
+ return PTR_ERR(res->core_clk);
|
||||
+
|
||||
+ res->phy_clk = devm_clk_get(dev, "phy");
|
||||
+ if (IS_ERR(res->phy_clk))
|
||||
+ return PTR_ERR(res->phy_clk);
|
||||
+
|
||||
+ res->pci_reset = devm_reset_control_get(dev, "pci");
|
||||
+ if (IS_ERR(res->pci_reset))
|
||||
+ return PTR_ERR(res->pci_reset);
|
||||
+
|
||||
+ res->axi_reset = devm_reset_control_get(dev, "axi");
|
||||
+ if (IS_ERR(res->axi_reset))
|
||||
+ return PTR_ERR(res->axi_reset);
|
||||
+
|
||||
+ res->ahb_reset = devm_reset_control_get(dev, "ahb");
|
||||
+ if (IS_ERR(res->ahb_reset))
|
||||
+ return PTR_ERR(res->ahb_reset);
|
||||
+
|
||||
+ res->por_reset = devm_reset_control_get(dev, "por");
|
||||
+ if (IS_ERR(res->por_reset))
|
||||
+ return PTR_ERR(res->por_reset);
|
||||
+
|
||||
+ res->phy_reset = devm_reset_control_get(dev, "phy");
|
||||
+ if (IS_ERR(res->phy_reset))
|
||||
+ return PTR_ERR(res->phy_reset);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
|
||||
+{
|
||||
+ struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+
|
||||
+ res->vdda = devm_regulator_get(dev, "vdda");
|
||||
+ if (IS_ERR(res->vdda))
|
||||
+ return PTR_ERR(res->vdda);
|
||||
+
|
||||
+ res->iface = devm_clk_get(dev, "iface");
|
||||
+ if (IS_ERR(res->iface))
|
||||
+ return PTR_ERR(res->iface);
|
||||
+
|
||||
+ res->aux = devm_clk_get(dev, "aux");
|
||||
+ if (IS_ERR(res->aux) && PTR_ERR(res->aux) == -EPROBE_DEFER)
|
||||
+ return -EPROBE_DEFER;
|
||||
+ else if (IS_ERR(res->aux))
|
||||
+ res->aux = NULL;
|
||||
+
|
||||
+ res->master_bus = devm_clk_get(dev, "master_bus");
|
||||
+ if (IS_ERR(res->master_bus))
|
||||
+ return PTR_ERR(res->master_bus);
|
||||
+
|
||||
+ res->slave_bus = devm_clk_get(dev, "slave_bus");
|
||||
+ if (IS_ERR(res->slave_bus))
|
||||
+ return PTR_ERR(res->slave_bus);
|
||||
+
|
||||
+ res->core = devm_reset_control_get(dev, "core");
|
||||
+ if (IS_ERR(res->core))
|
||||
+ return PTR_ERR(res->core);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_enable_link_training(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ struct device *dev = pp->dev;
|
||||
+ int retries;
|
||||
+ u32 val;
|
||||
+
|
||||
+ /* enable link training */
|
||||
+ writel_masked(pcie->elbi + PCIE20_ELBI_SYS_CTRL, 0, BIT(0));
|
||||
+
|
||||
+ /* wait for up to 100ms for the link to come up */
|
||||
+ retries = LINKUP_RETRIES_COUNT;
|
||||
+ do {
|
||||
+ val = readl(pcie->elbi + PCIE20_ELBI_SYS_STTS);
|
||||
+ if (val & XMLH_LINK_UP)
|
||||
+ break;
|
||||
+ usleep_range(LINKUP_DELAY_MIN_US, LINKUP_DELAY_MAX_US);
|
||||
+ } while (retries--);
|
||||
+
|
||||
+ if (retries < 0 || !dw_pcie_link_up(pp)) {
|
||||
+ dev_err(dev, "link initialization failed\n");
|
||||
+ return -ENXIO;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_host_init_v1(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ int ret;
|
||||
+
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_resources_v1(pcie);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+
|
||||
+ /* change DBI base address */
|
||||
+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT,
|
||||
+ 0, BIT(31));
|
||||
+
|
||||
+ ret = phy_init(pcie->phy);
|
||||
+ if (ret)
|
||||
+ goto err_res;
|
||||
+
|
||||
+ ret = phy_power_on(pcie->phy);
|
||||
+ if (ret)
|
||||
+ goto err_phy;
|
||||
+
|
||||
+ dw_pcie_setup_rc(pp);
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
+ dw_pcie_msi_init(pp);
|
||||
+
|
||||
+ qcom_ep_reset_deassert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_link_training(pp);
|
||||
+ if (ret)
|
||||
+ goto err;
|
||||
+
|
||||
+ return;
|
||||
+
|
||||
+err:
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+ phy_power_off(pcie->phy);
|
||||
+err_phy:
|
||||
+ phy_exit(pcie->phy);
|
||||
+err_res:
|
||||
+ qcom_pcie_disable_resources_v1(pcie);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_host_init_v0(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
+ struct device *dev = pcie->dev;
|
||||
+ int ret;
|
||||
+
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_resources_v0(pcie);
|
||||
+ if (ret)
|
||||
+ return;
|
||||
+
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
|
||||
+
|
||||
+ /* enable external reference clock */
|
||||
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
|
||||
+
|
||||
+ ret = reset_control_deassert(res->phy_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert phy reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->pci_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert pci reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->por_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert por reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = reset_control_deassert(res->axi_reset);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot deassert axi reset\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ /* wait 150ms for clock acquisition */
|
||||
+ usleep_range(10000, 15000);
|
||||
+
|
||||
+ dw_pcie_setup_rc(pp);
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
+ dw_pcie_msi_init(pp);
|
||||
+
|
||||
+ qcom_ep_reset_deassert(pcie);
|
||||
+
|
||||
+ ret = qcom_pcie_enable_link_training(pp);
|
||||
+ if (ret)
|
||||
+ goto err;
|
||||
+
|
||||
+ return;
|
||||
+err:
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+ qcom_pcie_disable_resources_v0(pcie);
|
||||
+}
|
||||
+
|
||||
+static void qcom_pcie_host_init(struct pcie_port *pp)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
+
|
||||
+ if (pcie->version == PCIE_V0)
|
||||
+ return qcom_pcie_host_init_v0(pp);
|
||||
+ else
|
||||
+ return qcom_pcie_host_init_v1(pp);
|
||||
+}
|
||||
+
|
||||
+static int
|
||||
+qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
|
||||
+{
|
||||
+ /* the device class is not reported correctly from the register */
|
||||
+ if (where == PCI_CLASS_REVISION && size == 4) {
|
||||
+ *val = readl(pp->dbi_base + PCI_CLASS_REVISION);
|
||||
+ *val &= ~(0xffff << 16);
|
||||
+ *val |= PCI_CLASS_BRIDGE_PCI << 16;
|
||||
+ return PCIBIOS_SUCCESSFUL;
|
||||
+ }
|
||||
+
|
||||
+ return dw_pcie_cfg_read(pp->dbi_base + (where & ~0x3), where,
|
||||
+ size, val);
|
||||
+}
|
||||
+
|
||||
+static struct pcie_host_ops qcom_pcie_ops = {
|
||||
+ .link_up = qcom_pcie_link_up,
|
||||
+ .host_init = qcom_pcie_host_init,
|
||||
+ .rd_own_conf = qcom_pcie_rd_own_conf,
|
||||
+};
|
||||
+
|
||||
+static const struct of_device_id qcom_pcie_match[] = {
|
||||
+ { .compatible = "qcom,pcie-v0", .data = (void *)PCIE_V0 },
|
||||
+ { .compatible = "qcom,pcie-v1", .data = (void *)PCIE_V1 },
|
||||
+ { }
|
||||
+};
|
||||
+
|
||||
+static int qcom_pcie_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ const struct of_device_id *match;
|
||||
+ struct resource *res;
|
||||
+ struct qcom_pcie *pcie;
|
||||
+ struct pcie_port *pp;
|
||||
+ int ret;
|
||||
+
|
||||
+ match = of_match_node(qcom_pcie_match, dev->of_node);
|
||||
+ if (!match)
|
||||
+ return -ENXIO;
|
||||
+
|
||||
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
|
||||
+ if (!pcie)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ pcie->version = (unsigned int)match->data;
|
||||
+
|
||||
+ pcie->reset = devm_gpiod_get_optional(dev, "perst");
|
||||
+ if (IS_ERR(pcie->reset) && PTR_ERR(pcie->reset) == -EPROBE_DEFER)
|
||||
+ return PTR_ERR(pcie->reset);
|
||||
+
|
||||
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
|
||||
+ pcie->parf = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(pcie->parf))
|
||||
+ return PTR_ERR(pcie->parf);
|
||||
+
|
||||
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
|
||||
+ pcie->dbi = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(pcie->dbi))
|
||||
+ return PTR_ERR(pcie->dbi);
|
||||
+
|
||||
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
|
||||
+ pcie->elbi = devm_ioremap_resource(dev, res);
|
||||
+ if (IS_ERR(pcie->elbi))
|
||||
+ return PTR_ERR(pcie->elbi);
|
||||
+
|
||||
+ pcie->phy = devm_phy_optional_get(dev, "pciephy");
|
||||
+ if (IS_ERR(pcie->phy))
|
||||
+ return PTR_ERR(pcie->phy);
|
||||
+
|
||||
+ pcie->dev = dev;
|
||||
+
|
||||
+ if (pcie->version == PCIE_V0)
|
||||
+ ret = qcom_pcie_get_resources_v0(pcie);
|
||||
+ else
|
||||
+ ret = qcom_pcie_get_resources_v1(pcie);
|
||||
+
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ pp = &pcie->pp;
|
||||
+ pp->dev = dev;
|
||||
+ pp->dbi_base = pcie->dbi;
|
||||
+ pp->root_bus_nr = -1;
|
||||
+ pp->ops = &qcom_pcie_ops;
|
||||
+
|
||||
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
||||
+ pp->msi_irq = platform_get_irq_byname(pdev, "msi");
|
||||
+ if (pp->msi_irq < 0) {
|
||||
+ dev_err(dev, "cannot get msi irq\n");
|
||||
+ return pp->msi_irq;
|
||||
+ }
|
||||
+
|
||||
+ ret = devm_request_irq(dev, pp->msi_irq,
|
||||
+ qcom_pcie_msi_irq_handler,
|
||||
+ IRQF_SHARED, "qcom-pcie-msi", pp);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot request msi irq\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ ret = dw_pcie_host_init(pp);
|
||||
+ if (ret) {
|
||||
+ dev_err(dev, "cannot initialize host\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ platform_set_drvdata(pdev, pcie);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int qcom_pcie_remove(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct qcom_pcie *pcie = platform_get_drvdata(pdev);
|
||||
+
|
||||
+ qcom_ep_reset_assert(pcie);
|
||||
+ phy_power_off(pcie->phy);
|
||||
+ phy_exit(pcie->phy);
|
||||
+ if (pcie->version == PCIE_V0)
|
||||
+ qcom_pcie_disable_resources_v0(pcie);
|
||||
+ else
|
||||
+ qcom_pcie_disable_resources_v1(pcie);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver qcom_pcie_driver = {
|
||||
+ .probe = qcom_pcie_probe,
|
||||
+ .remove = qcom_pcie_remove,
|
||||
+ .driver = {
|
||||
+ .name = "qcom-pcie",
|
||||
+ .of_match_table = qcom_pcie_match,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(qcom_pcie_driver);
|
||||
+
|
||||
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
|
||||
+MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
|
||||
+MODULE_LICENSE("GPL v2");
|
||||
+MODULE_ALIAS("platform:qcom-pcie");
|
||||
--- a/drivers/pci/host/Makefile
|
||||
+++ b/drivers/pci/host/Makefile
|
||||
@@ -13,3 +13,4 @@ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx
|
||||
obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
|
||||
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
|
||||
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
|
||||
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
|
||||
@@ -0,0 +1,260 @@
|
||||
From 5b40516b2f5fb9b2a7d6d3e2e924f12ec9d183a8 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Tue, 21 Apr 2015 19:01:42 -0700
|
||||
Subject: [PATCH 8/9] ARM: dts: qcom: add pcie nodes to ipq806x platforms
|
||||
|
||||
qcom-pcie driver now supports version 0 of the controller. This change
|
||||
adds the corresponding entries to the IPQ806x dtsi file and
|
||||
corresponding platform (AP148).
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
---
|
||||
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 30 ++++++++
|
||||
arch/arm/boot/dts/qcom-ipq8064.dtsi | 124 +++++++++++++++++++++++++++++++
|
||||
2 files changed, 154 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
||||
@@ -30,6 +30,22 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
+ pcie1_pins: pcie1_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio3";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie2_pins: pcie2_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio48";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
@@ -112,5 +128,19 @@
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
};
|
||||
+
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 3 0>;
|
||||
+ pinctrl-0 = <&pcie1_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pci@1b700000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 48 0>;
|
||||
+ pinctrl-0 = <&pcie2_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
};
|
||||
};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
||||
@@ -37,6 +37,30 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
+ pcie1_pins: pcie1_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio3";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie2_pins: pcie2_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio48";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pcie3_pins: pcie3_pinmux {
|
||||
+ mux {
|
||||
+ pins = "gpio63";
|
||||
+ drive-strength = <2>;
|
||||
+ bias-disable;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
@@ -153,6 +177,27 @@
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 3 0>;
|
||||
+ pinctrl-0 = <&pcie1_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pci@1b700000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 48 0>;
|
||||
+ pinctrl-0 = <&pcie2_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
+ pcie2: pci@1b900000 {
|
||||
+ status = "ok";
|
||||
+ reset-gpio = <&qcom_pinmux 63 0>;
|
||||
+ pinctrl-0 = <&pcie3_pins>;
|
||||
+ pinctrl-names = "default";
|
||||
+ };
|
||||
+
|
||||
mdio0: mdio {
|
||||
compatible = "virtual,mdio-gpio";
|
||||
#address-cells = <1>;
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -3,6 +3,7 @@
|
||||
#include "skeleton.dtsi"
|
||||
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064";
|
||||
@@ -291,5 +292,128 @@
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
+
|
||||
+ pcie0: pci@1b500000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b500000 0x1000
|
||||
+ 0x1b502000 0x80
|
||||
+ 0x1b600000 0x100
|
||||
+ 0x0ff00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <0>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* downstream I/O */
|
||||
+ 0x82000000 0 0x00000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
|
||||
+
|
||||
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+
|
||||
+ clocks = <&gcc PCIE_A_CLK>,
|
||||
+ <&gcc PCIE_H_CLK>,
|
||||
+ <&gcc PCIE_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+
|
||||
+ resets = <&gcc PCIE_ACLK_RESET>,
|
||||
+ <&gcc PCIE_HCLK_RESET>,
|
||||
+ <&gcc PCIE_POR_RESET>,
|
||||
+ <&gcc PCIE_PCI_RESET>,
|
||||
+ <&gcc PCIE_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ pcie1: pci@1b700000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b700000 0x1000
|
||||
+ 0x1b702000 0x80
|
||||
+ 0x1b800000 0x100
|
||||
+ 0x31f00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <1>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ ranges = <0x81000000 0 0 0x31e00000 0 0x00100000 /* downstream I/O */
|
||||
+ 0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
|
||||
+
|
||||
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+
|
||||
+ clocks = <&gcc PCIE_1_A_CLK>,
|
||||
+ <&gcc PCIE_1_H_CLK>,
|
||||
+ <&gcc PCIE_1_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+
|
||||
+ resets = <&gcc PCIE_1_ACLK_RESET>,
|
||||
+ <&gcc PCIE_1_HCLK_RESET>,
|
||||
+ <&gcc PCIE_1_POR_RESET>,
|
||||
+ <&gcc PCIE_1_PCI_RESET>,
|
||||
+ <&gcc PCIE_1_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
+ pcie2: pci@1b900000 {
|
||||
+ compatible = "qcom,pcie-v0";
|
||||
+ reg = <0x1b900000 0x1000
|
||||
+ 0x1b902000 0x80
|
||||
+ 0x1ba00000 0x100
|
||||
+ 0x35f00000 0x100000>;
|
||||
+ reg-names = "dbi", "elbi", "parf", "config";
|
||||
+ device_type = "pci";
|
||||
+ linux,pci-domain = <2>;
|
||||
+ bus-range = <0x00 0xff>;
|
||||
+ num-lanes = <1>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+
|
||||
+ ranges = <0x81000000 0 0 0x35e00000 0 0x00100000 /* downstream I/O */
|
||||
+ 0x82000000 0 0x00000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
|
||||
+
|
||||
+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
|
||||
+ interrupt-names = "msi";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ interrupt-map-mask = <0 0 0 0x7>;
|
||||
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
+
|
||||
+ clocks = <&gcc PCIE_2_A_CLK>,
|
||||
+ <&gcc PCIE_2_H_CLK>,
|
||||
+ <&gcc PCIE_2_PHY_CLK>;
|
||||
+ clock-names = "core", "iface", "phy";
|
||||
+
|
||||
+ resets = <&gcc PCIE_2_ACLK_RESET>,
|
||||
+ <&gcc PCIE_2_HCLK_RESET>,
|
||||
+ <&gcc PCIE_2_POR_RESET>,
|
||||
+ <&gcc PCIE_2_PCI_RESET>,
|
||||
+ <&gcc PCIE_2_PHY_RESET>;
|
||||
+ reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
+
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,29 @@
|
||||
From f004aa1dec6e2e206be025de15b115d60f2b21e3 Mon Sep 17 00:00:00 2001
|
||||
From: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
Date: Tue, 21 Apr 2015 19:09:07 -0700
|
||||
Subject: [PATCH 9/9] ARM: qcom: automatically select PCI_DOMAINS if PCI is
|
||||
enabled
|
||||
|
||||
If multiple PCIe devices are present in the system, the kernel will
|
||||
panic at boot time when trying to scan the PCI buses. This happens on
|
||||
IPQ806x based platforms, which has 3 PCIe ports.
|
||||
|
||||
Enabling this option allows the kernel to assign the pci-domains
|
||||
according to the device-tree content. This allows multiple PCIe
|
||||
controllers to coexist in the system.
|
||||
|
||||
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
||||
---
|
||||
arch/arm/mach-qcom/Kconfig | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
--- a/arch/arm/mach-qcom/Kconfig
|
||||
+++ b/arch/arm/mach-qcom/Kconfig
|
||||
@@ -5,6 +5,7 @@ menuconfig ARCH_QCOM
|
||||
select ARM_AMBA
|
||||
select PINCTRL
|
||||
select QCOM_SCM if SMP
|
||||
+ select PCI_DOMAINS if PCI
|
||||
help
|
||||
Support for Qualcomm's devicetree based systems.
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
||||
@@ -18,8 +18,15 @@
|
||||
bootargs = "console=ttyMSM0,115200 root=/dev/mtdblock12 rootfstype=squashfs,jffs2";
|
||||
@@ -22,8 +22,15 @@
|
||||
linux,stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
+ aliases {
|
||||
@@ -16,7 +16,7 @@
|
||||
i2c4_pins: i2c4_pinmux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
@@ -34,6 +41,25 @@
|
||||
@@ -54,6 +61,25 @@
|
||||
bias-none;
|
||||
};
|
||||
};
|
||||
@@ -42,17 +42,17 @@
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
@@ -72,6 +98,7 @@
|
||||
@@ -92,6 +118,7 @@
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
+ m25p,fast-read;
|
||||
|
||||
partition@0 {
|
||||
label = "0:SBL1";
|
||||
@@ -148,5 +175,66 @@
|
||||
sata@29000000 {
|
||||
status = "ok";
|
||||
label = "lowlevel_init";
|
||||
@@ -142,5 +169,66 @@
|
||||
pinctrl-0 = <&pcie2_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
+
|
||||
+ mdio0: mdio {
|
||||
@@ -119,17 +119,17 @@
|
||||
};
|
||||
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
||||
@@ -3,6 +3,7 @@
|
||||
#include "skeleton.dtsi"
|
||||
@@ -4,6 +4,7 @@
|
||||
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
||||
#include <dt-bindings/soc/qcom,gsbi.h>
|
||||
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
|
||||
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm IPQ8064";
|
||||
@@ -279,5 +280,42 @@
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
@@ -415,5 +416,42 @@
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
+
|
||||
+ nss-gmac-common {
|
||||
|
||||
Reference in New Issue
Block a user