domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mvebu: backport upstream ethernet driver improvements and enable buffer manager support

Browse Source 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
Felix Fietkau
2016-05-21 22:16:56 +02:00
parent e90245237c
commit df98acc6a1
29 changed files with 4334 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/mvebu/config-4.4
View File

@@ -209,6 +209,7 @@ CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HWBM=y
CONFIG_HWMON=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
@@ -274,6 +275,7 @@ CONFIG_MVEBU_DEVBUS=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
CONFIG_MVNETA=y
CONFIG_MVNETA_BM=y
CONFIG_MVSW61XX_PHY=y
CONFIG_MV_XOR=y
CONFIG_NEED_DMA_MAP_STATE=y

2
target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch
View File

@@ -31,7 +31,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1636,7 +1636,7 @@ static int pxa3xx_nand_scan(struct mtd_i
@@ -1637,7 +1637,7 @@ static int pxa3xx_nand_scan(struct mtd_i
goto KEEP_CONFIG;
/* Set a default chunk size */

8
target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch
View File

@@ -19,7 +19,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1419,34 +1419,43 @@ static int pxa3xx_nand_waitfunc(struct m
@@ -1420,34 +1420,43 @@ static int pxa3xx_nand_waitfunc(struct m
return NAND_STATUS_READY;
}
@@ -71,7 +71,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
return 0;
@@ -1635,10 +1644,7 @@ static int pxa3xx_nand_scan(struct mtd_i
@@ -1636,10 +1645,7 @@ static int pxa3xx_nand_scan(struct mtd_i
if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
goto KEEP_CONFIG;
@@ -83,7 +83,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
if (ret)
return ret;
@@ -1651,7 +1657,6 @@ static int pxa3xx_nand_scan(struct mtd_i
@@ -1652,7 +1658,6 @@ static int pxa3xx_nand_scan(struct mtd_i
}
KEEP_CONFIG:
@@ -91,7 +91,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com>
if (info->reg_ndcr & NDCR_DWIDTH_M)
chip->options |= NAND_BUSWIDTH_16;
@@ -1736,6 +1741,10 @@ KEEP_CONFIG:
@@ -1737,6 +1742,10 @@ KEEP_CONFIG:
host->row_addr_cycles = 3;
else
host->row_addr_cycles = 2;

94
target/linux/mvebu/patches-4.4/023-bus-mvebu-mbus-provide-api-for-obtaining-IO-and-DRAM.patch Normal file
View File

@@ -0,0 +1,94 @@
From: Marcin Wojtas <mw@semihalf.com>
Date: Mon, 14 Mar 2016 09:39:02 +0100
Subject: [PATCH] bus: mvebu-mbus: provide api for obtaining IO and DRAM window
information
This commit enables finding appropriate mbus window and obtaining its
target id and attribute for given physical address in two separate
routines, both for IO and DRAM windows. This functionality
is needed for Armada XP/38x Network Controller's Buffer Manager and
PnC configuration.
[gregory.clement@free-electrons.com: Fix size test for
mvebu_mbus_get_dram_win_info]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
[DRAM window information reference in LKv3.10]
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -948,6 +948,58 @@ void mvebu_mbus_get_pcie_io_aperture(str
*res = mbus_state.pcie_io_aperture;
}
+int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
+{
+ const struct mbus_dram_target_info *dram;
+ int i;
+
+ /* Get dram info */
+ dram = mv_mbus_dram_info();
+ if (!dram) {
+ pr_err("missing DRAM information\n");
+ return -ENODEV;
+ }
+
+ /* Try to find matching DRAM window for phyaddr */
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ if (cs->base <= phyaddr &&
+ phyaddr <= (cs->base + cs->size - 1)) {
+ *target = dram->mbus_dram_target_id;
+ *attr = cs->mbus_attr;
+ return 0;
+ }
+ }
+
+ pr_err("invalid dram address 0x%x\n", phyaddr);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);
+
+int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target,
+ u8 *attr)
+{
+ int win;
+
+ for (win = 0; win < mbus_state.soc->num_wins; win++) {
+ u64 wbase;
+ int enabled;
+
+ mvebu_mbus_read_window(&mbus_state, win, &enabled, &wbase,
+ size, target, attr, NULL);
+
+ if (!enabled)
+ continue;
+
+ if (wbase <= phyaddr && phyaddr <= wbase + *size)
+ return win;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_io_win_info);
+
static __init int mvebu_mbus_debugfs_init(void)
{
struct mvebu_mbus_state *s = &mbus_state;
--- a/include/linux/mbus.h
+++ b/include/linux/mbus.h
@@ -69,6 +69,9 @@ static inline const struct mbus_dram_tar
int mvebu_mbus_save_cpu_target(u32 *store_addr);
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
+int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr);
+int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target,
+ u8 *attr);
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
unsigned int attribute,
phys_addr_t base, size_t size,

55
target/linux/mvebu/patches-4.4/030-mvneta-consolidate-autoneg-enabling.patch Normal file
View File

@@ -0,0 +1,55 @@
From: Stas Sergeev <stsp@list.ru>
Date: Wed, 2 Dec 2015 20:33:56 +0300
Subject: [PATCH] mvneta: consolidate autoneg enabling
This moves autoneg-related bit manipulations to the single place.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1067,15 +1067,28 @@ static void mvneta_defaults_set(struct m
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_AN_DUPLEX_EN;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
} else {
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_AN_DUPLEX_EN);
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
}
mvneta_set_ucast_table(pp, -1);
@@ -3230,9 +3243,6 @@ static int mvneta_port_power_up(struct m
return -EINVAL;
}
- if (pp->use_inband_status)
- ctrl |= MVNETA_GMAC2_INBAND_AN_ENABLE;
-
/* Cancel Port Reset */
ctrl &= ~MVNETA_GMAC2_PORT_RESET;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);

165
target/linux/mvebu/patches-4.4/031-mvneta-implement-ethtool-autonegotiation-control.patch Normal file
View File

@@ -0,0 +1,165 @@
From: Stas Sergeev <stsp@list.ru>
Date: Wed, 2 Dec 2015 20:35:11 +0300
Subject: [PATCH] mvneta: implement ethtool autonegotiation control
This patch allows to do
ethtool -s eth0 autoneg off
ethtool -s eth0 autoneg on
to disable or enable autonegotiation at run-time.
Without that functionality, the only way to control the autonegotiation
is to modify the device tree.
This is needed if you plan to use the same kernel with
different ethernet switches, the ones that support the in-band
status and the ones that not.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -371,7 +371,7 @@ struct mvneta_port {
unsigned int duplex;
unsigned int speed;
unsigned int tx_csum_limit;
- int use_inband_status:1;
+ unsigned int use_inband_status:1;
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
};
@@ -973,6 +973,44 @@ static void mvneta_set_other_mcast_table
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
}
+static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
+{
+ u32 val;
+
+ if (enable) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
+ MVNETA_GMAC_FORCE_LINK_DOWN |
+ MVNETA_GMAC_AN_FLOW_CTRL_EN);
+ val |= MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+ } else {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN);
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+ }
+}
+
/* This method sets defaults to the NETA port:
* Clears interrupt Cause and Mask registers.
* Clears all MAC tables.
@@ -1058,39 +1096,7 @@ static void mvneta_defaults_set(struct m
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
- if (pp->use_inband_status) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_AN_FLOW_CTRL_EN);
- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- } else {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- }
-
+ mvneta_set_autoneg(pp, pp->use_inband_status);
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
@@ -2956,10 +2962,43 @@ int mvneta_ethtool_get_settings(struct n
int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mvneta_port *pp = netdev_priv(dev);
+ struct phy_device *phydev = pp->phy_dev;
- if (!pp->phy_dev)
+ if (!phydev)
return -ENODEV;
+ if ((cmd->autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
+ u32 val;
+
+ mvneta_set_autoneg(pp, cmd->autoneg == AUTONEG_ENABLE);
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+
+ if (phydev->duplex)
+ val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ if (phydev->speed == SPEED_1000)
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+ else if (phydev->speed == SPEED_100)
+ val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+ pp->use_inband_status = (cmd->autoneg == AUTONEG_ENABLE);
+ netdev_info(pp->dev, "autoneg status set to %i\n",
+ pp->use_inband_status);
+
+ if (netif_running(dev)) {
+ mvneta_port_down(pp);
+ mvneta_port_up(pp);
+ }
+ }
+
return phy_ethtool_sset(pp->phy_dev, cmd);
}

131
target/linux/mvebu/patches-4.4/032-net-mvneta-Make-the-default-queue-related-for-each-p.patch Normal file
View File

@@ -0,0 +1,131 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Wed, 9 Dec 2015 18:23:48 +0100
Subject: [PATCH] net: mvneta: Make the default queue related for each port
Instead of using the same default queue for all the port. Move it in the
port struct. It will allow have a different default queue for each port.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -356,6 +356,7 @@ struct mvneta_port {
struct mvneta_tx_queue *txqs;
struct net_device *dev;
struct notifier_block cpu_notifier;
+ int rxq_def;
/* Core clock */
struct clk *clk;
@@ -819,7 +820,7 @@ static void mvneta_port_up(struct mvneta
mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
/* Enable all initialized RXQs. */
- mvreg_write(pp, MVNETA_RXQ_CMD, BIT(rxq_def));
+ mvreg_write(pp, MVNETA_RXQ_CMD, BIT(pp->rxq_def));
}
/* Stop the Ethernet port activity */
@@ -1067,7 +1068,7 @@ static void mvneta_defaults_set(struct m
mvreg_write(pp, MVNETA_ACC_MODE, val);
/* Update val of portCfg register accordingly with all RxQueue types */
- val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
+ val = MVNETA_PORT_CONFIG_DEFL_VALUE(pp->rxq_def);
mvreg_write(pp, MVNETA_PORT_CONFIG, val);
val = 0;
@@ -2101,19 +2102,19 @@ static void mvneta_set_rx_mode(struct ne
if (dev->flags & IFF_PROMISC) {
/* Accept all: Multicast + Unicast */
mvneta_rx_unicast_promisc_set(pp, 1);
- mvneta_set_ucast_table(pp, rxq_def);
- mvneta_set_special_mcast_table(pp, rxq_def);
- mvneta_set_other_mcast_table(pp, rxq_def);
+ mvneta_set_ucast_table(pp, pp->rxq_def);
+ mvneta_set_special_mcast_table(pp, pp->rxq_def);
+ mvneta_set_other_mcast_table(pp, pp->rxq_def);
} else {
/* Accept single Unicast */
mvneta_rx_unicast_promisc_set(pp, 0);
mvneta_set_ucast_table(pp, -1);
- mvneta_mac_addr_set(pp, dev->dev_addr, rxq_def);
+ mvneta_mac_addr_set(pp, dev->dev_addr, pp->rxq_def);
if (dev->flags & IFF_ALLMULTI) {
/* Accept all multicast */
- mvneta_set_special_mcast_table(pp, rxq_def);
- mvneta_set_other_mcast_table(pp, rxq_def);
+ mvneta_set_special_mcast_table(pp, pp->rxq_def);
+ mvneta_set_other_mcast_table(pp, pp->rxq_def);
} else {
/* Accept only initialized multicast */
mvneta_set_special_mcast_table(pp, -1);
@@ -2122,7 +2123,7 @@ static void mvneta_set_rx_mode(struct ne
if (!netdev_mc_empty(dev)) {
netdev_for_each_mc_addr(ha, dev) {
mvneta_mcast_addr_set(pp, ha->addr,
- rxq_def);
+ pp->rxq_def);
}
}
}
@@ -2205,7 +2206,7 @@ static int mvneta_poll(struct napi_struc
* RX packets
*/
cause_rx_tx |= port->cause_rx_tx;
- rx_done = mvneta_rx(pp, budget, &pp->rxqs[rxq_def]);
+ rx_done = mvneta_rx(pp, budget, &pp->rxqs[pp->rxq_def]);
budget -= rx_done;
if (budget > 0) {
@@ -2418,17 +2419,17 @@ static void mvneta_cleanup_txqs(struct m
/* Cleanup all Rx queues */
static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
{
- mvneta_rxq_deinit(pp, &pp->rxqs[rxq_def]);
+ mvneta_rxq_deinit(pp, &pp->rxqs[pp->rxq_def]);
}
/* Init all Rx queues */
static int mvneta_setup_rxqs(struct mvneta_port *pp)
{
- int err = mvneta_rxq_init(pp, &pp->rxqs[rxq_def]);
+ int err = mvneta_rxq_init(pp, &pp->rxqs[pp->rxq_def]);
if (err) {
netdev_err(pp->dev, "%s: can't create rxq=%d\n",
- __func__, rxq_def);
+ __func__, pp->rxq_def);
mvneta_cleanup_rxqs(pp);
return err;
}
@@ -2634,7 +2635,7 @@ static int mvneta_set_mac_addr(struct ne
mvneta_mac_addr_set(pp, dev->dev_addr, -1);
/* Set new addr in hw */
- mvneta_mac_addr_set(pp, sockaddr->sa_data, rxq_def);
+ mvneta_mac_addr_set(pp, sockaddr->sa_data, pp->rxq_def);
eth_commit_mac_addr_change(dev, addr);
return 0;
@@ -2753,7 +2754,7 @@ static void mvneta_percpu_elect(struct m
{
int online_cpu_idx, cpu, i = 0;
- online_cpu_idx = rxq_def % num_online_cpus();
+ online_cpu_idx = pp->rxq_def % num_online_cpus();
for_each_online_cpu(cpu) {
if (i == online_cpu_idx)
@@ -3363,6 +3364,8 @@ static int mvneta_probe(struct platform_
strcmp(managed, "in-band-status") == 0);
pp->cpu_notifier.notifier_call = mvneta_percpu_notifier;
+ pp->rxq_def = rxq_def;
+
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
err = PTR_ERR(pp->clk);

278
target/linux/mvebu/patches-4.4/033-net-mvneta-Associate-RX-queues-with-each-CPU.patch Normal file
View File

@@ -0,0 +1,278 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Wed, 9 Dec 2015 18:23:49 +0100
Subject: [PATCH] net: mvneta: Associate RX queues with each CPU
We enable the percpu interrupt for all the CPU and we just associate a
CPU to a few queue at the neta level. The mapping between the CPUs and
the queues is static. The queues are associated to the CPU module the
number of CPUs. However currently we only use on RX queue for a given
Ethernet port.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -110,9 +110,16 @@
#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
+#define MVNETA_CPU_RXQ_ACCESS(rxq) BIT(rxq)
#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2))
-/* Exception Interrupt Port/Queue Cause register */
+/* Exception Interrupt Port/Queue Cause register
+ *
+ * Their behavior depend of the mapping done using the PCPX2Q
+ * registers. For a given CPU if the bit associated to a queue is not
+ * set, then for the register a read from this CPU will always return
+ * 0 and a write won't do anything
+ */
#define MVNETA_INTR_NEW_CAUSE 0x25a0
#define MVNETA_INTR_NEW_MASK 0x25a4
@@ -820,7 +827,13 @@ static void mvneta_port_up(struct mvneta
mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
/* Enable all initialized RXQs. */
- mvreg_write(pp, MVNETA_RXQ_CMD, BIT(pp->rxq_def));
+ for (queue = 0; queue < rxq_number; queue++) {
+ struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+
+ if (rxq->descs != NULL)
+ q_map |= (1 << queue);
+ }
+ mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
}
/* Stop the Ethernet port activity */
@@ -1026,6 +1039,7 @@ static void mvneta_defaults_set(struct m
int cpu;
int queue;
u32 val;
+ int max_cpu = num_present_cpus();
/* Clear all Cause registers */
mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
@@ -1041,13 +1055,23 @@ static void mvneta_defaults_set(struct m
/* Enable MBUS Retry bit16 */
mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
- /* Set CPU queue access map - all CPUs have access to all RX
- * queues and to all TX queues
+ /* Set CPU queue access map. CPUs are assigned to the RX
+ * queues modulo their number and all the TX queues are
+ * assigned to the CPU associated to the default RX queue.
*/
- for_each_present_cpu(cpu)
- mvreg_write(pp, MVNETA_CPU_MAP(cpu),
- (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
- MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
+ for_each_present_cpu(cpu) {
+ int rxq_map = 0, txq_map = 0;
+ int rxq;
+
+ for (rxq = 0; rxq < rxq_number; rxq++)
+ if ((rxq % max_cpu) == cpu)
+ rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
+
+ if (cpu == rxq_def)
+ txq_map = MVNETA_CPU_TXQ_ACCESS_ALL_MASK;
+
+ mvreg_write(pp, MVNETA_CPU_MAP(cpu), rxq_map | txq_map);
+ }
/* Reset RX and TX DMAs */
mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
@@ -2174,6 +2198,7 @@ static int mvneta_poll(struct napi_struc
{
int rx_done = 0;
u32 cause_rx_tx;
+ int rx_queue;
struct mvneta_port *pp = netdev_priv(napi->dev);
struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
@@ -2205,8 +2230,15 @@ static int mvneta_poll(struct napi_struc
/* For the case where the last mvneta_poll did not process all
* RX packets
*/
+ rx_queue = fls(((cause_rx_tx >> 8) & 0xff));
+
cause_rx_tx |= port->cause_rx_tx;
- rx_done = mvneta_rx(pp, budget, &pp->rxqs[pp->rxq_def]);
+
+ if (rx_queue) {
+ rx_queue = rx_queue - 1;
+ rx_done = mvneta_rx(pp, budget, &pp->rxqs[rx_queue]);
+ }
+
budget -= rx_done;
if (budget > 0) {
@@ -2419,19 +2451,27 @@ static void mvneta_cleanup_txqs(struct m
/* Cleanup all Rx queues */
static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
{
- mvneta_rxq_deinit(pp, &pp->rxqs[pp->rxq_def]);
+ int queue;
+
+ for (queue = 0; queue < txq_number; queue++)
+ mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
}
/* Init all Rx queues */
static int mvneta_setup_rxqs(struct mvneta_port *pp)
{
- int err = mvneta_rxq_init(pp, &pp->rxqs[pp->rxq_def]);
- if (err) {
- netdev_err(pp->dev, "%s: can't create rxq=%d\n",
- __func__, pp->rxq_def);
- mvneta_cleanup_rxqs(pp);
- return err;
+ int queue;
+
+ for (queue = 0; queue < rxq_number; queue++) {
+ int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
+
+ if (err) {
+ netdev_err(pp->dev, "%s: can't create rxq=%d\n",
+ __func__, queue);
+ mvneta_cleanup_rxqs(pp);
+ return err;
+ }
}
return 0;
@@ -2455,6 +2495,19 @@ static int mvneta_setup_txqs(struct mvne
return 0;
}
+static void mvneta_percpu_unmask_interrupt(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ /* All the queue are unmasked, but actually only the ones
+ * maped to this CPU will be unmasked
+ */
+ mvreg_write(pp, MVNETA_INTR_NEW_MASK,
+ MVNETA_RX_INTR_MASK_ALL |
+ MVNETA_TX_INTR_MASK_ALL |
+ MVNETA_MISCINTR_INTR_MASK);
+}
+
static void mvneta_start_dev(struct mvneta_port *pp)
{
unsigned int cpu;
@@ -2472,11 +2525,10 @@ static void mvneta_start_dev(struct mvne
napi_enable(&port->napi);
}
- /* Unmask interrupts */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK,
- MVNETA_RX_INTR_MASK(rxq_number) |
- MVNETA_TX_INTR_MASK(txq_number) |
- MVNETA_MISCINTR_INTR_MASK);
+ /* Unmask interrupts. It has to be done from each CPU */
+ for_each_online_cpu(cpu)
+ smp_call_function_single(cpu, mvneta_percpu_unmask_interrupt,
+ pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |
@@ -2752,22 +2804,35 @@ static void mvneta_percpu_disable(void *
static void mvneta_percpu_elect(struct mvneta_port *pp)
{
- int online_cpu_idx, cpu, i = 0;
+ int online_cpu_idx, max_cpu, cpu, i = 0;
online_cpu_idx = pp->rxq_def % num_online_cpus();
+ max_cpu = num_present_cpus();
for_each_online_cpu(cpu) {
- if (i == online_cpu_idx)
- /* Enable per-CPU interrupt on the one CPU we
- * just elected
+ int rxq_map = 0, txq_map = 0;
+ int rxq;
+
+ for (rxq = 0; rxq < rxq_number; rxq++)
+ if ((rxq % max_cpu) == cpu)
+ rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
+
+ if (i == online_cpu_idx) {
+ /* Map the default receive queue and transmit
+ * queue to the elected CPU
*/
- smp_call_function_single(cpu, mvneta_percpu_enable,
- pp, true);
- else
- /* Disable per-CPU interrupt on all the other CPU */
- smp_call_function_single(cpu, mvneta_percpu_disable,
- pp, true);
+ rxq_map |= MVNETA_CPU_RXQ_ACCESS(pp->rxq_def);
+ txq_map = MVNETA_CPU_TXQ_ACCESS_ALL_MASK;
+ }
+ mvreg_write(pp, MVNETA_CPU_MAP(cpu), rxq_map | txq_map);
+
+ /* Update the interrupt mask on each CPU according the
+ * new mapping
+ */
+ smp_call_function_single(cpu, mvneta_percpu_unmask_interrupt,
+ pp, true);
i++;
+
}
};
@@ -2802,12 +2867,22 @@ static int mvneta_percpu_notifier(struct
mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
napi_enable(&port->napi);
+
+ /* Enable per-CPU interrupts on the CPU that is
+ * brought up.
+ */
+ smp_call_function_single(cpu, mvneta_percpu_enable,
+ pp, true);
+
/* Enable per-CPU interrupt on the one CPU we care
* about.
*/
mvneta_percpu_elect(pp);
- /* Unmask all ethernet port interrupts */
+ /* Unmask all ethernet port interrupts, as this
+ * notifier is called for each CPU then the CPU to
+ * Queue mapping is applied
+ */
mvreg_write(pp, MVNETA_INTR_NEW_MASK,
MVNETA_RX_INTR_MASK(rxq_number) |
MVNETA_TX_INTR_MASK(txq_number) |
@@ -2858,7 +2933,7 @@ static int mvneta_percpu_notifier(struct
static int mvneta_open(struct net_device *dev)
{
struct mvneta_port *pp = netdev_priv(dev);
- int ret;
+ int ret, cpu;
pp->pkt_size = MVNETA_RX_PKT_SIZE(pp->dev->mtu);
pp->frag_size = SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(pp->pkt_size)) +
@@ -2888,8 +2963,13 @@ static int mvneta_open(struct net_device
*/
mvneta_percpu_disable(pp);
- /* Elect a CPU to handle our RX queue interrupt */
- mvneta_percpu_elect(pp);
+ /* Enable per-CPU interrupt on all the CPU to handle our RX
+ * queue interrupts
+ */
+ for_each_online_cpu(cpu)
+ smp_call_function_single(cpu, mvneta_percpu_enable,
+ pp, true);
+
/* Register a CPU notifier to handle the case where our CPU
* might be taken offline.

191
target/linux/mvebu/patches-4.4/034-net-mvneta-Add-naive-RSS-support.patch Normal file
View File

@@ -0,0 +1,191 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Wed, 9 Dec 2015 18:23:50 +0100
Subject: [PATCH] net: mvneta: Add naive RSS support
This patch adds the support for the RSS related ethtool
function. Currently it only uses one entry in the indirection table which
allows associating an mvneta interface to a given CPU.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -261,6 +261,11 @@
#define MVNETA_TX_MTU_MAX 0x3ffff
+/* The RSS lookup table actually has 256 entries but we do not use
+ * them yet
+ */
+#define MVNETA_RSS_LU_TABLE_SIZE 1
+
/* TSO header size */
#define TSO_HEADER_SIZE 128
@@ -382,6 +387,8 @@ struct mvneta_port {
unsigned int use_inband_status:1;
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
+
+ u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
};
/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
@@ -1067,7 +1074,7 @@ static void mvneta_defaults_set(struct m
if ((rxq % max_cpu) == cpu)
rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
- if (cpu == rxq_def)
+ if (cpu == pp->rxq_def)
txq_map = MVNETA_CPU_TXQ_ACCESS_ALL_MASK;
mvreg_write(pp, MVNETA_CPU_MAP(cpu), rxq_map | txq_map);
@@ -2508,6 +2515,18 @@ static void mvneta_percpu_unmask_interru
MVNETA_MISCINTR_INTR_MASK);
}
+static void mvneta_percpu_mask_interrupt(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ /* All the queue are masked, but actually only the ones
+ * maped to this CPU will be masked
+ */
+ mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+}
+
static void mvneta_start_dev(struct mvneta_port *pp)
{
unsigned int cpu;
@@ -3231,6 +3250,106 @@ static int mvneta_ethtool_get_sset_count
return -EOPNOTSUPP;
}
+static u32 mvneta_ethtool_get_rxfh_indir_size(struct net_device *dev)
+{
+ return MVNETA_RSS_LU_TABLE_SIZE;
+}
+
+static int mvneta_ethtool_get_rxnfc(struct net_device *dev,
+ struct ethtool_rxnfc *info,
+ u32 *rules __always_unused)
+{
+ switch (info->cmd) {
+ case ETHTOOL_GRXRINGS:
+ info->data = rxq_number;
+ return 0;
+ case ETHTOOL_GRXFH:
+ return -EOPNOTSUPP;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int mvneta_config_rss(struct mvneta_port *pp)
+{
+ int cpu;
+ u32 val;
+
+ netif_tx_stop_all_queues(pp->dev);
+
+ for_each_online_cpu(cpu)
+ smp_call_function_single(cpu, mvneta_percpu_mask_interrupt,
+ pp, true);
+
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
+
+ napi_synchronize(&pcpu_port->napi);
+ napi_disable(&pcpu_port->napi);
+ }
+
+ pp->rxq_def = pp->indir[0];
+
+ /* Update unicast mapping */
+ mvneta_set_rx_mode(pp->dev);
+
+ /* Update val of portCfg register accordingly with all RxQueue types */
+ val = MVNETA_PORT_CONFIG_DEFL_VALUE(pp->rxq_def);
+ mvreg_write(pp, MVNETA_PORT_CONFIG, val);
+
+ /* Update the elected CPU matching the new rxq_def */
+ mvneta_percpu_elect(pp);
+
+ /* We have to synchronise on the napi of each CPU */
+ for_each_online_cpu(cpu) {
+ struct mvneta_pcpu_port *pcpu_port =
+ per_cpu_ptr(pp->ports, cpu);
+
+ napi_enable(&pcpu_port->napi);
+ }
+
+ netif_tx_start_all_queues(pp->dev);
+
+ return 0;
+}
+
+static int mvneta_ethtool_set_rxfh(struct net_device *dev, const u32 *indir,
+ const u8 *key, const u8 hfunc)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+ /* We require at least one supported parameter to be changed
+ * and no change in any of the unsupported parameters
+ */
+ if (key ||
+ (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP))
+ return -EOPNOTSUPP;
+
+ if (!indir)
+ return 0;
+
+ memcpy(pp->indir, indir, MVNETA_RSS_LU_TABLE_SIZE);
+
+ return mvneta_config_rss(pp);
+}
+
+static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key,
+ u8 *hfunc)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+
+ if (hfunc)
+ *hfunc = ETH_RSS_HASH_TOP;
+
+ if (!indir)
+ return 0;
+
+ memcpy(indir, pp->indir, MVNETA_RSS_LU_TABLE_SIZE);
+
+ return 0;
+}
+
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
@@ -3255,6 +3374,10 @@ const struct ethtool_ops mvneta_eth_tool
.get_strings = mvneta_ethtool_get_strings,
.get_ethtool_stats = mvneta_ethtool_get_stats,
.get_sset_count = mvneta_ethtool_get_sset_count,
+ .get_rxfh_indir_size = mvneta_ethtool_get_rxfh_indir_size,
+ .get_rxnfc = mvneta_ethtool_get_rxnfc,
+ .get_rxfh = mvneta_ethtool_get_rxfh,
+ .set_rxfh = mvneta_ethtool_set_rxfh,
};
/* Initialize hw */
@@ -3446,6 +3569,8 @@ static int mvneta_probe(struct platform_
pp->rxq_def = rxq_def;
+ pp->indir[0] = rxq_def;
+
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
err = PTR_ERR(pp->clk);

124
target/linux/mvebu/patches-4.4/035-net-mvneta-Configure-XPS-support.patch Normal file
View File

@@ -0,0 +1,124 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Wed, 9 Dec 2015 18:23:51 +0100
Subject: [PATCH] net: mvneta: Configure XPS support
With this patch each CPU is associated with its own set of TX queues.
It also setup the XPS with an initial configuration which set the
affinity matching the hardware configuration.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -111,6 +111,7 @@
#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
#define MVNETA_CPU_RXQ_ACCESS(rxq) BIT(rxq)
+#define MVNETA_CPU_TXQ_ACCESS(txq) BIT(txq + 8)
#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2))
/* Exception Interrupt Port/Queue Cause register
@@ -514,6 +515,9 @@ struct mvneta_tx_queue {
/* DMA address of TSO headers */
dma_addr_t tso_hdrs_phys;
+
+ /* Affinity mask for CPUs*/
+ cpumask_t affinity_mask;
};
struct mvneta_rx_queue {
@@ -1062,20 +1066,30 @@ static void mvneta_defaults_set(struct m
/* Enable MBUS Retry bit16 */
mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
- /* Set CPU queue access map. CPUs are assigned to the RX
- * queues modulo their number and all the TX queues are
- * assigned to the CPU associated to the default RX queue.
+ /* Set CPU queue access map. CPUs are assigned to the RX and
+ * TX queues modulo their number. If there is only one TX
+ * queue then it is assigned to the CPU associated to the
+ * default RX queue.
*/
for_each_present_cpu(cpu) {
int rxq_map = 0, txq_map = 0;
- int rxq;
+ int rxq, txq;
for (rxq = 0; rxq < rxq_number; rxq++)
if ((rxq % max_cpu) == cpu)
rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
- if (cpu == pp->rxq_def)
- txq_map = MVNETA_CPU_TXQ_ACCESS_ALL_MASK;
+ for (txq = 0; txq < txq_number; txq++)
+ if ((txq % max_cpu) == cpu)
+ txq_map |= MVNETA_CPU_TXQ_ACCESS(txq);
+
+ /* With only one TX queue we configure a special case
+ * which will allow to get all the irq on a single
+ * CPU
+ */
+ if (txq_number == 1)
+ txq_map = (cpu == pp->rxq_def) ?
+ MVNETA_CPU_TXQ_ACCESS(1) : 0;
mvreg_write(pp, MVNETA_CPU_MAP(cpu), rxq_map | txq_map);
}
@@ -2362,6 +2376,8 @@ static void mvneta_rxq_deinit(struct mvn
static int mvneta_txq_init(struct mvneta_port *pp,
struct mvneta_tx_queue *txq)
{
+ int cpu;
+
txq->size = pp->tx_ring_size;
/* A queue must always have room for at least one skb.
@@ -2414,6 +2430,14 @@ static int mvneta_txq_init(struct mvneta
}
mvneta_tx_done_pkts_coal_set(pp, txq, txq->done_pkts_coal);
+ /* Setup XPS mapping */
+ if (txq_number > 1)
+ cpu = txq->id % num_present_cpus();
+ else
+ cpu = pp->rxq_def % num_present_cpus();
+ cpumask_set_cpu(cpu, &txq->affinity_mask);
+ netif_set_xps_queue(pp->dev, &txq->affinity_mask, txq->id);
+
return 0;
}
@@ -2836,13 +2860,23 @@ static void mvneta_percpu_elect(struct m
if ((rxq % max_cpu) == cpu)
rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
- if (i == online_cpu_idx) {
- /* Map the default receive queue and transmit
- * queue to the elected CPU
+ if (i == online_cpu_idx)
+ /* Map the default receive queue queue to the
+ * elected CPU
*/
rxq_map |= MVNETA_CPU_RXQ_ACCESS(pp->rxq_def);
- txq_map = MVNETA_CPU_TXQ_ACCESS_ALL_MASK;
- }
+
+ /* We update the TX queue map only if we have one
+ * queue. In this case we associate the TX queue to
+ * the CPU bound to the default RX queue
+ */
+ if (txq_number == 1)
+ txq_map = (i == online_cpu_idx) ?
+ MVNETA_CPU_TXQ_ACCESS(1) : 0;
+ else
+ txq_map = mvreg_read(pp, MVNETA_CPU_MAP(cpu)) &
+ MVNETA_CPU_TXQ_ACCESS_ALL_MASK;
+
mvreg_write(pp, MVNETA_CPU_MAP(cpu), rxq_map | txq_map);
/* Update the interrupt mask on each CPU according the

46
target/linux/mvebu/patches-4.4/036-net-mvneta-fix-trivial-cut-off-issue-in-mvneta_ethto.patch Normal file
View File

@@ -0,0 +1,46 @@
From: Jisheng Zhang <jszhang@marvell.com>
Date: Wed, 20 Jan 2016 16:36:25 +0800
Subject: [PATCH] net: mvneta: fix trivial cut-off issue in
mvneta_ethtool_update_stats
When s->type is T_REG_64, the high 32bits are lost in val. This patch
fixes this trivial issue.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Fixes: 9b0cdefa4cd5 ("net: mvneta: add ethtool statistics")
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3242,26 +3242,25 @@ static void mvneta_ethtool_update_stats(
const struct mvneta_statistic *s;
void __iomem *base = pp->base;
u32 high, low, val;
+ u64 val64;
int i;
for (i = 0, s = mvneta_statistics;
s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics);
s++, i++) {
- val = 0;
-
switch (s->type) {
case T_REG_32:
val = readl_relaxed(base + s->offset);
+ pp->ethtool_stats[i] += val;
break;
case T_REG_64:
/* Docs say to read low 32-bit then high */
low = readl_relaxed(base + s->offset);
high = readl_relaxed(base + s->offset + 4);
- val = (u64)high << 32 | low;
+ val64 = (u64)high << 32 | low;
+ pp->ethtool_stats[i] += val64;
break;
}
-
- pp->ethtool_stats[i] += val;
}
}

55
target/linux/mvebu/patches-4.4/037-net-mvneta-Fix-for_each_present_cpu-usage.patch Normal file
View File

@@ -0,0 +1,55 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 4 Feb 2016 22:09:23 +0100
Subject: [PATCH] net: mvneta: Fix for_each_present_cpu usage
This patch convert the for_each_present in on_each_cpu, instead of
applying on the present cpus it will be applied only on the online cpus.
This fix a bug reported on
http://thread.gmane.org/gmane.linux.ports.arm.kernel/468173.
Using the macro on_each_cpu (instead of a for_each_* loop) also ensures
that all the calls will be done all at once.
Fixes: f86428854480 ("net: mvneta: Statically assign queues to CPUs")
Reported-by: Stefan Roese <stefan.roese@gmail.com>
Suggested-by: Jisheng Zhang <jszhang@marvell.com>
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2562,7 +2562,7 @@ static void mvneta_start_dev(struct mvne
mvneta_port_enable(pp);
/* Enable polling on the port */
- for_each_present_cpu(cpu) {
+ for_each_online_cpu(cpu) {
struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
napi_enable(&port->napi);
@@ -2587,7 +2587,7 @@ static void mvneta_stop_dev(struct mvnet
phy_stop(pp->phy_dev);
- for_each_present_cpu(cpu) {
+ for_each_online_cpu(cpu) {
struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
napi_disable(&port->napi);
@@ -3055,13 +3055,11 @@ err_cleanup_rxqs:
static int mvneta_stop(struct net_device *dev)
{
struct mvneta_port *pp = netdev_priv(dev);
- int cpu;
mvneta_stop_dev(pp);
mvneta_mdio_remove(pp);
unregister_cpu_notifier(&pp->cpu_notifier);
- for_each_present_cpu(cpu)
- smp_call_function_single(cpu, mvneta_percpu_disable, pp, true);
+ on_each_cpu(mvneta_percpu_disable, pp, true);
free_percpu_irq(dev->irq, pp->ports);
mvneta_cleanup_rxqs(pp);
mvneta_cleanup_txqs(pp);

57
target/linux/mvebu/patches-4.4/038-net-mvneta-Fix-the-CPU-choice-in-mvneta_percpu_elect.patch Normal file
View File

@@ -0,0 +1,57 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 4 Feb 2016 22:09:24 +0100
Subject: [PATCH] net: mvneta: Fix the CPU choice in mvneta_percpu_elect
When passing to the management of multiple RX queue, the
mvneta_percpu_elect function was broken. The use of the modulo can lead
to elect the wrong cpu. For example with rxq_def=2, if the CPU 2 goes
offline and then online, we ended with the third RX queue activated in
the same time on CPU 0 and CPU2, which lead to a kernel crash.
With this fix, we don't try to get "the closer" CPU if the default CPU is
gone, now we just use CPU 0 which always be there. Thanks to this, the
code becomes more readable, easier to maintain and more predicable.
Cc: stable@vger.kernel.org
Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2847,9 +2847,14 @@ static void mvneta_percpu_disable(void *
static void mvneta_percpu_elect(struct mvneta_port *pp)
{
- int online_cpu_idx, max_cpu, cpu, i = 0;
+ int elected_cpu = 0, max_cpu, cpu, i = 0;
+
+ /* Use the cpu associated to the rxq when it is online, in all
+ * the other cases, use the cpu 0 which can't be offline.
+ */
+ if (cpu_online(pp->rxq_def))
+ elected_cpu = pp->rxq_def;
- online_cpu_idx = pp->rxq_def % num_online_cpus();
max_cpu = num_present_cpus();
for_each_online_cpu(cpu) {
@@ -2860,7 +2865,7 @@ static void mvneta_percpu_elect(struct m
if ((rxq % max_cpu) == cpu)
rxq_map |= MVNETA_CPU_RXQ_ACCESS(rxq);
- if (i == online_cpu_idx)
+ if (cpu == elected_cpu)
/* Map the default receive queue queue to the
* elected CPU
*/
@@ -2871,7 +2876,7 @@ static void mvneta_percpu_elect(struct m
* the CPU bound to the default RX queue
*/
if (txq_number == 1)
- txq_map = (i == online_cpu_idx) ?
+ txq_map = (cpu == elected_cpu) ?
MVNETA_CPU_TXQ_ACCESS(1) : 0;
else
txq_map = mvreg_read(pp, MVNETA_CPU_MAP(cpu)) &

68
target/linux/mvebu/patches-4.4/039-net-mvneta-Use-on_each_cpu-when-possible.patch Normal file
View File

@@ -0,0 +1,68 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 4 Feb 2016 22:09:25 +0100
Subject: [PATCH] net: mvneta: Use on_each_cpu when possible
Instead of using a for_each_* loop in which we just call the
smp_call_function_single macro, it is more simple to directly use the
on_each_cpu macro. Moreover, this macro ensures that the calls will be
done all at once.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2553,7 +2553,7 @@ static void mvneta_percpu_mask_interrupt
static void mvneta_start_dev(struct mvneta_port *pp)
{
- unsigned int cpu;
+ int cpu;
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
@@ -2569,9 +2569,8 @@ static void mvneta_start_dev(struct mvne
}
/* Unmask interrupts. It has to be done from each CPU */
- for_each_online_cpu(cpu)
- smp_call_function_single(cpu, mvneta_percpu_unmask_interrupt,
- pp, true);
+ on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
+
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |
@@ -2991,7 +2990,7 @@ static int mvneta_percpu_notifier(struct
static int mvneta_open(struct net_device *dev)
{
struct mvneta_port *pp = netdev_priv(dev);
- int ret, cpu;
+ int ret;
pp->pkt_size = MVNETA_RX_PKT_SIZE(pp->dev->mtu);
pp->frag_size = SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(pp->pkt_size)) +
@@ -3024,9 +3023,7 @@ static int mvneta_open(struct net_device
/* Enable per-CPU interrupt on all the CPU to handle our RX
* queue interrupts
*/
- for_each_online_cpu(cpu)
- smp_call_function_single(cpu, mvneta_percpu_enable,
- pp, true);
+ on_each_cpu(mvneta_percpu_enable, pp, true);
/* Register a CPU notifier to handle the case where our CPU
@@ -3313,9 +3310,7 @@ static int mvneta_config_rss(struct mvn
netif_tx_stop_all_queues(pp->dev);
- for_each_online_cpu(cpu)
- smp_call_function_single(cpu, mvneta_percpu_mask_interrupt,
- pp, true);
+ on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
/* We have to synchronise on the napi of each CPU */
for_each_online_cpu(cpu) {

179
target/linux/mvebu/patches-4.4/040-net-mvneta-Modify-the-queue-related-fields-from-each.patch Normal file
View File

@@ -0,0 +1,179 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 4 Feb 2016 22:09:27 +0100
Subject: [PATCH] net: mvneta: Modify the queue related fields from each cpu
In the MVNETA_INTR_* registers, the queues related fields are per cpu,
according to the datasheet (comment in [] are added by me):
"In a multi-CPU system, bits of RX[or TX] queues for which the access by
the reading[or writing] CPU is disabled are read as 0, and cannot be
cleared[or written]."
That means that each time we want to manipulate these bits we had to do
it on each cpu and not only on the current cpu.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1036,6 +1036,43 @@ static void mvneta_set_autoneg(struct mv
}
}
+static void mvneta_percpu_unmask_interrupt(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ /* All the queue are unmasked, but actually only the ones
+ * mapped to this CPU will be unmasked
+ */
+ mvreg_write(pp, MVNETA_INTR_NEW_MASK,
+ MVNETA_RX_INTR_MASK_ALL |
+ MVNETA_TX_INTR_MASK_ALL |
+ MVNETA_MISCINTR_INTR_MASK);
+}
+
+static void mvneta_percpu_mask_interrupt(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ /* All the queue are masked, but actually only the ones
+ * mapped to this CPU will be masked
+ */
+ mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+}
+
+static void mvneta_percpu_clear_intr_cause(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ /* All the queue are cleared, but actually only the ones
+ * mapped to this CPU will be cleared
+ */
+ mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
+ mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+ mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+}
+
/* This method sets defaults to the NETA port:
* Clears interrupt Cause and Mask registers.
* Clears all MAC tables.
@@ -1053,14 +1090,10 @@ static void mvneta_defaults_set(struct m
int max_cpu = num_present_cpus();
/* Clear all Cause registers */
- mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
- mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+ on_each_cpu(mvneta_percpu_clear_intr_cause, pp, true);
/* Mask all interrupts */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+ on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
/* Enable MBUS Retry bit16 */
@@ -2526,31 +2559,6 @@ static int mvneta_setup_txqs(struct mvne
return 0;
}
-static void mvneta_percpu_unmask_interrupt(void *arg)
-{
- struct mvneta_port *pp = arg;
-
- /* All the queue are unmasked, but actually only the ones
- * maped to this CPU will be unmasked
- */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK,
- MVNETA_RX_INTR_MASK_ALL |
- MVNETA_TX_INTR_MASK_ALL |
- MVNETA_MISCINTR_INTR_MASK);
-}
-
-static void mvneta_percpu_mask_interrupt(void *arg)
-{
- struct mvneta_port *pp = arg;
-
- /* All the queue are masked, but actually only the ones
- * maped to this CPU will be masked
- */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
-}
-
static void mvneta_start_dev(struct mvneta_port *pp)
{
int cpu;
@@ -2601,13 +2609,10 @@ static void mvneta_stop_dev(struct mvnet
mvneta_port_disable(pp);
/* Clear all ethernet port interrupts */
- mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+ on_each_cpu(mvneta_percpu_clear_intr_cause, pp, true);
/* Mask all ethernet port interrupts */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+ on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
mvneta_tx_reset(pp);
mvneta_rx_reset(pp);
@@ -2919,9 +2924,7 @@ static int mvneta_percpu_notifier(struct
}
/* Mask all ethernet port interrupts */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+ on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
napi_enable(&port->napi);
@@ -2936,14 +2939,8 @@ static int mvneta_percpu_notifier(struct
*/
mvneta_percpu_elect(pp);
- /* Unmask all ethernet port interrupts, as this
- * notifier is called for each CPU then the CPU to
- * Queue mapping is applied
- */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK,
- MVNETA_RX_INTR_MASK(rxq_number) |
- MVNETA_TX_INTR_MASK(txq_number) |
- MVNETA_MISCINTR_INTR_MASK);
+ /* Unmask all ethernet port interrupts */
+ on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |
@@ -2954,9 +2951,7 @@ static int mvneta_percpu_notifier(struct
case CPU_DOWN_PREPARE_FROZEN:
netif_tx_stop_all_queues(pp->dev);
/* Mask all ethernet port interrupts */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+ on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
napi_synchronize(&port->napi);
napi_disable(&port->napi);
@@ -2972,10 +2967,7 @@ static int mvneta_percpu_notifier(struct
/* Check if a new CPU must be elected now this on is down */
mvneta_percpu_elect(pp);
/* Unmask all ethernet port interrupts */
- mvreg_write(pp, MVNETA_INTR_NEW_MASK,
- MVNETA_RX_INTR_MASK(rxq_number) |
- MVNETA_TX_INTR_MASK(txq_number) |
- MVNETA_MISCINTR_INTR_MASK);
+ on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |

68
target/linux/mvebu/patches-4.4/041-net-mvneta-The-mvneta_percpu_elect-function-should-b.patch Normal file
View File

@@ -0,0 +1,68 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 4 Feb 2016 22:09:28 +0100
Subject: [PATCH] net: mvneta: The mvneta_percpu_elect function should be
atomic
Electing a CPU must be done in an atomic way: it should be done after or
before the removal/insertion of a CPU and this function is not reentrant.
During the loop of mvneta_percpu_elect we associates the queues to the
CPUs, if there is a topology change during this loop, then the mapping
between the CPUs and the queues could be wrong. During this loop the
interrupt mask is also updating for each CPUs, It should not be changed
in the same time by other part of the driver.
This patch adds spinlock to create the needed critical sections.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -370,6 +370,10 @@ struct mvneta_port {
struct net_device *dev;
struct notifier_block cpu_notifier;
int rxq_def;
+ /* Protect the access to the percpu interrupt registers,
+ * ensuring that the configuration remains coherent.
+ */
+ spinlock_t lock;
/* Core clock */
struct clk *clk;
@@ -2853,6 +2857,12 @@ static void mvneta_percpu_elect(struct m
{
int elected_cpu = 0, max_cpu, cpu, i = 0;
+ /* Electing a CPU must be done in an atomic way: it should be
+ * done after or before the removal/insertion of a CPU and
+ * this function is not reentrant.
+ */
+ spin_lock(&pp->lock);
+
/* Use the cpu associated to the rxq when it is online, in all
* the other cases, use the cpu 0 which can't be offline.
*/
@@ -2896,6 +2906,7 @@ static void mvneta_percpu_elect(struct m
i++;
}
+ spin_unlock(&pp->lock);
};
static int mvneta_percpu_notifier(struct notifier_block *nfb,
@@ -2950,8 +2961,13 @@ static int mvneta_percpu_notifier(struct
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
netif_tx_stop_all_queues(pp->dev);
+ /* Thanks to this lock we are sure that any pending
+ * cpu election is done
+ */
+ spin_lock(&pp->lock);
/* Mask all ethernet port interrupts */
on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
+ spin_unlock(&pp->lock);
napi_synchronize(&port->napi);
napi_disable(&port->napi);

128
target/linux/mvebu/patches-4.4/042-net-mvneta-Fix-race-condition-during-stopping.patch Normal file
View File

@@ -0,0 +1,128 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 4 Feb 2016 22:09:29 +0100
Subject: [PATCH] net: mvneta: Fix race condition during stopping
When stopping the port, the CPU notifier are still there whereas the
mvneta_stop_dev function calls mvneta_percpu_disable() on each CPUs.
It was possible to have a new CPU coming at this point which could be
racy.
This patch adds a flag preventing executing the code notifier for a new
CPU when the port is stopping. It also uses the spinlock introduces
previously. To avoid the deadlock, the lock has been moved outside the
mvneta_percpu_elect function.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -374,6 +374,7 @@ struct mvneta_port {
* ensuring that the configuration remains coherent.
*/
spinlock_t lock;
+ bool is_stopped;
/* Core clock */
struct clk *clk;
@@ -2853,16 +2854,14 @@ static void mvneta_percpu_disable(void *
disable_percpu_irq(pp->dev->irq);
}
+/* Electing a CPU must be done in an atomic way: it should be done
+ * after or before the removal/insertion of a CPU and this function is
+ * not reentrant.
+ */
static void mvneta_percpu_elect(struct mvneta_port *pp)
{
int elected_cpu = 0, max_cpu, cpu, i = 0;
- /* Electing a CPU must be done in an atomic way: it should be
- * done after or before the removal/insertion of a CPU and
- * this function is not reentrant.
- */
- spin_lock(&pp->lock);
-
/* Use the cpu associated to the rxq when it is online, in all
* the other cases, use the cpu 0 which can't be offline.
*/
@@ -2906,7 +2905,6 @@ static void mvneta_percpu_elect(struct m
i++;
}
- spin_unlock(&pp->lock);
};
static int mvneta_percpu_notifier(struct notifier_block *nfb,
@@ -2920,6 +2918,14 @@ static int mvneta_percpu_notifier(struct
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
+ spin_lock(&pp->lock);
+ /* Configuring the driver for a new CPU while the
+ * driver is stopping is racy, so just avoid it.
+ */
+ if (pp->is_stopped) {
+ spin_unlock(&pp->lock);
+ break;
+ }
netif_tx_stop_all_queues(pp->dev);
/* We have to synchronise on tha napi of each CPU
@@ -2957,6 +2963,7 @@ static int mvneta_percpu_notifier(struct
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE);
netif_tx_start_all_queues(pp->dev);
+ spin_unlock(&pp->lock);
break;
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
@@ -2981,7 +2988,9 @@ static int mvneta_percpu_notifier(struct
case CPU_DEAD:
case CPU_DEAD_FROZEN:
/* Check if a new CPU must be elected now this on is down */
+ spin_lock(&pp->lock);
mvneta_percpu_elect(pp);
+ spin_unlock(&pp->lock);
/* Unmask all ethernet port interrupts */
on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
@@ -3033,7 +3042,7 @@ static int mvneta_open(struct net_device
*/
on_each_cpu(mvneta_percpu_enable, pp, true);
-
+ pp->is_stopped = false;
/* Register a CPU notifier to handle the case where our CPU
* might be taken offline.
*/
@@ -3066,9 +3075,18 @@ static int mvneta_stop(struct net_device
{
struct mvneta_port *pp = netdev_priv(dev);
+ /* Inform that we are stopping so we don't want to setup the
+ * driver for new CPUs in the notifiers
+ */
+ spin_lock(&pp->lock);
+ pp->is_stopped = true;
mvneta_stop_dev(pp);
mvneta_mdio_remove(pp);
unregister_cpu_notifier(&pp->cpu_notifier);
+ /* Now that the notifier are unregistered, we can release le
+ * lock
+ */
+ spin_unlock(&pp->lock);
on_each_cpu(mvneta_percpu_disable, pp, true);
free_percpu_irq(dev->irq, pp->ports);
mvneta_cleanup_rxqs(pp);
@@ -3339,7 +3357,9 @@ static int mvneta_config_rss(struct mvn
mvreg_write(pp, MVNETA_PORT_CONFIG, val);
/* Update the elected CPU matching the new rxq_def */
+ spin_lock(&pp->lock);
mvneta_percpu_elect(pp);
+ spin_unlock(&pp->lock);
/* We have to synchronise on the napi of each CPU */
for_each_online_cpu(cpu) {

56
target/linux/mvebu/patches-4.4/043-net-mvneta-sort-the-headers-in-alphabetic-order.patch Normal file
View File

@@ -0,0 +1,56 @@
From: Jisheng Zhang <jszhang@marvell.com>
Date: Wed, 20 Jan 2016 19:27:22 +0800
Subject: [PATCH] net: mvneta: sort the headers in alphabetic order
Sorting the headers in alphabetic order will help to reduce the conflict
when adding new headers in the future.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -11,28 +11,28 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/skbuff.h>
+#include <linux/if_vlan.h>
#include <linux/inetdevice.h>
-#include <linux/mbus.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/if_vlan.h>
-#include <net/ip.h>
-#include <net/ipv6.h>
#include <linux/io.h>
-#include <net/tso.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
-#include <linux/of_address.h>
#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/cpu.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <net/tso.h>
/* Registers */
#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))

159
target/linux/mvebu/patches-4.4/044-net-add-a-hardware-buffer-management-helper-API.patch Normal file
View File

@@ -0,0 +1,159 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon, 14 Mar 2016 09:39:04 +0100
Subject: [PATCH] net: add a hardware buffer management helper API
This basic implementation allows to share code between driver using
hardware buffer management. As the code is hardware agnostic, there is
few helpers, most of the optimization brought by the an HW BM has to be
done at driver level.
Tested-by: Sebastian Careba <nitroshift@yahoo.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
create mode 100644 include/net/hwbm.h
create mode 100644 net/core/hwbm.c
--- /dev/null
+++ b/include/net/hwbm.h
@@ -0,0 +1,28 @@
+#ifndef _HWBM_H
+#define _HWBM_H
+
+struct hwbm_pool {
+ /* Capacity of the pool */
+ int size;
+ /* Size of the buffers managed */
+ int frag_size;
+ /* Number of buffers currently used by this pool */
+ int buf_num;
+ /* constructor called during alocation */
+ int (*construct)(struct hwbm_pool *bm_pool, void *buf);
+ /* protect acces to the buffer counter*/
+ spinlock_t lock;
+ /* private data */
+ void *priv;
+};
+#ifdef CONFIG_HWBM
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf);
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp);
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp);
+#else
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf) {}
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp) { return 0; }
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp)
+{ return 0; }
+#endif /* CONFIG_HWBM */
+#endif /* _HWBM_H */
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -259,6 +259,9 @@ config XPS
depends on SMP
default y
+config HWBM
+ bool
+
config CGROUP_NET_PRIO
bool "Network priority cgroup"
depends on CGROUPS
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -14,6 +14,7 @@ obj-y += dev.o ethtool.o dev_addr_
obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
obj-$(CONFIG_XFRM) += flow.o
obj-y += net-sysfs.o
+obj-$(CONFIG_HWBM) += hwbm.o
obj-$(CONFIG_PROC_FS) += net-procfs.o
obj-$(CONFIG_NET_PKTGEN) += pktgen.o
obj-$(CONFIG_NETPOLL) += netpoll.o
--- /dev/null
+++ b/net/core/hwbm.c
@@ -0,0 +1,87 @@
+/* Support for hardware buffer manager.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/skbuff.h>
+#include <net/hwbm.h>
+
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf)
+{
+ if (likely(bm_pool->frag_size <= PAGE_SIZE))
+ skb_free_frag(buf);
+ else
+ kfree(buf);
+}
+EXPORT_SYMBOL_GPL(hwbm_buf_free);
+
+/* Refill processing for HW buffer management */
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp)
+{
+ int frag_size = bm_pool->frag_size;
+ void *buf;
+
+ if (likely(frag_size <= PAGE_SIZE))
+ buf = netdev_alloc_frag(frag_size);
+ else
+ buf = kmalloc(frag_size, gfp);
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (bm_pool->construct)
+ if (bm_pool->construct(bm_pool, buf)) {
+ hwbm_buf_free(bm_pool, buf);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hwbm_pool_refill);
+
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp)
+{
+ int err, i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bm_pool->lock, flags);
+ if (bm_pool->buf_num == bm_pool->size) {
+ pr_warn("pool already filled\n");
+ return bm_pool->buf_num;
+ }
+
+ if (buf_num + bm_pool->buf_num > bm_pool->size) {
+ pr_warn("cannot allocate %d buffers for pool\n",
+ buf_num);
+ return 0;
+ }
+
+ if ((buf_num + bm_pool->buf_num) < bm_pool->buf_num) {
+ pr_warn("Adding %d buffers to the %d current buffers will overflow\n",
+ buf_num, bm_pool->buf_num);
+ return 0;
+ }
+
+ for (i = 0; i < buf_num; i++) {
+ err = hwbm_pool_refill(bm_pool, gfp);
+ if (err < 0)
+ break;
+ }
+
+ /* Update BM driver with number of buffers added to pool */
+ bm_pool->buf_num += i;
+
+ pr_debug("hwpm pool: %d of %d buffers added\n", i, buf_num);
+ spin_unlock_irqrestore(&bm_pool->lock, flags);
+
+ return i;
+}
+EXPORT_SYMBOL_GPL(hwbm_pool_add);

1684
target/linux/mvebu/patches-4.4/045-net-mvneta-bm-add-support-for-hardware-buffer-manage.patch Normal file
View File

File diff suppressed because it is too large Load Diff

359
target/linux/mvebu/patches-4.4/046-net-mvneta-Use-the-new-hwbm-framework.patch Normal file
View File

@@ -0,0 +1,359 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon, 14 Mar 2016 09:39:05 +0100
Subject: [PATCH] net: mvneta: Use the new hwbm framework
Now that the hardware buffer management framework had been introduced,
let's use it.
Tested-by: Sebastian Careba <nitroshift@yahoo.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -43,6 +43,7 @@ config MVMDIO
config MVNETA_BM
tristate "Marvell Armada 38x/XP network interface BM support"
depends on MVNETA
+ select HWBM
---help---
This driver supports auxiliary block of the network
interface units in the Marvell ARMADA XP and ARMADA 38x SoC
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -30,6 +30,7 @@
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/skbuff.h>
+#include <net/hwbm.h>
#include "mvneta_bm.h"
#include <net/ip.h>
#include <net/ipv6.h>
@@ -1024,11 +1025,12 @@ static int mvneta_bm_port_init(struct pl
static void mvneta_bm_update_mtu(struct mvneta_port *pp, int mtu)
{
struct mvneta_bm_pool *bm_pool = pp->pool_long;
+ struct hwbm_pool *hwbm_pool = &bm_pool->hwbm_pool;
int num;
/* Release all buffers from long pool */
mvneta_bm_bufs_free(pp->bm_priv, bm_pool, 1 << pp->id);
- if (bm_pool->buf_num) {
+ if (hwbm_pool->buf_num) {
WARN(1, "cannot free all buffers in pool %d\n",
bm_pool->id);
goto bm_mtu_err;
@@ -1036,14 +1038,14 @@ static void mvneta_bm_update_mtu(struct
bm_pool->pkt_size = MVNETA_RX_PKT_SIZE(mtu);
bm_pool->buf_size = MVNETA_RX_BUF_SIZE(bm_pool->pkt_size);
- bm_pool->frag_size = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
- SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(bm_pool->pkt_size));
+ hwbm_pool->frag_size = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
+ SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(bm_pool->pkt_size));
/* Fill entire long pool */
- num = mvneta_bm_bufs_add(pp->bm_priv, bm_pool, bm_pool->size);
- if (num != bm_pool->size) {
+ num = hwbm_pool_add(hwbm_pool, hwbm_pool->size, GFP_ATOMIC);
+ if (num != hwbm_pool->size) {
WARN(1, "pool %d: %d of %d allocated\n",
- bm_pool->id, num, bm_pool->size);
+ bm_pool->id, num, hwbm_pool->size);
goto bm_mtu_err;
}
mvneta_bm_pool_bufsize_set(pp, bm_pool->buf_size, bm_pool->id);
@@ -2064,14 +2066,14 @@ err_drop_frame:
}
/* Refill processing */
- err = mvneta_bm_pool_refill(pp->bm_priv, bm_pool);
+ err = hwbm_pool_refill(&bm_pool->hwbm_pool, GFP_ATOMIC);
if (err) {
netdev_err(dev, "Linux processing - Can't refill\n");
rxq->missed++;
goto err_drop_frame_ret_pool;
}
- frag_size = bm_pool->frag_size;
+ frag_size = bm_pool->hwbm_pool.frag_size;
skb = build_skb(data, frag_size > PAGE_SIZE ? 0 : frag_size);
--- a/drivers/net/ethernet/marvell/mvneta_bm.c
+++ b/drivers/net/ethernet/marvell/mvneta_bm.c
@@ -10,16 +10,17 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/genalloc.h>
-#include <linux/platform_device.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/mbus.h>
#include <linux/module.h>
-#include <linux/io.h>
+#include <linux/netdevice.h>
#include <linux/of.h>
-#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <net/hwbm.h>
#include "mvneta_bm.h"
#define MVNETA_BM_DRIVER_NAME "mvneta_bm"
@@ -88,17 +89,13 @@ static void mvneta_bm_pool_target_set(st
mvneta_bm_write(priv, MVNETA_BM_XBAR_POOL_REG(pool_id), val);
}
-/* Allocate skb for BM pool */
-void *mvneta_buf_alloc(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- dma_addr_t *buf_phys_addr)
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf)
{
- void *buf;
+ struct mvneta_bm_pool *bm_pool =
+ (struct mvneta_bm_pool *)hwbm_pool->priv;
+ struct mvneta_bm *priv = bm_pool->priv;
dma_addr_t phys_addr;
- buf = mvneta_frag_alloc(bm_pool->frag_size);
- if (!buf)
- return NULL;
-
/* In order to update buf_cookie field of RX descriptor properly,
* BM hardware expects buf virtual address to be placed in the
* first four bytes of mapped buffer.
@@ -106,75 +103,13 @@ void *mvneta_buf_alloc(struct mvneta_bm
*(u32 *)buf = (u32)buf;
phys_addr = dma_map_single(&priv->pdev->dev, buf, bm_pool->buf_size,
DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(&priv->pdev->dev, phys_addr))) {
- mvneta_frag_free(bm_pool->frag_size, buf);
- return NULL;
- }
- *buf_phys_addr = phys_addr;
-
- return buf;
-}
-
-/* Refill processing for HW buffer management */
-int mvneta_bm_pool_refill(struct mvneta_bm *priv,
- struct mvneta_bm_pool *bm_pool)
-{
- dma_addr_t buf_phys_addr;
- void *buf;
-
- buf = mvneta_buf_alloc(priv, bm_pool, &buf_phys_addr);
- if (!buf)
+ if (unlikely(dma_mapping_error(&priv->pdev->dev, phys_addr)))
return -ENOMEM;
- mvneta_bm_pool_put_bp(priv, bm_pool, buf_phys_addr);
-
+ mvneta_bm_pool_put_bp(priv, bm_pool, phys_addr);
return 0;
}
-EXPORT_SYMBOL_GPL(mvneta_bm_pool_refill);
-
-/* Allocate buffers for the pool */
-int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- int buf_num)
-{
- int err, i;
-
- if (bm_pool->buf_num == bm_pool->size) {
- dev_dbg(&priv->pdev->dev, "pool %d already filled\n",
- bm_pool->id);
- return bm_pool->buf_num;
- }
-
- if (buf_num < 0 ||
- (buf_num + bm_pool->buf_num > bm_pool->size)) {
- dev_err(&priv->pdev->dev,
- "cannot allocate %d buffers for pool %d\n",
- buf_num, bm_pool->id);
- return 0;
- }
-
- for (i = 0; i < buf_num; i++) {
- err = mvneta_bm_pool_refill(priv, bm_pool);
- if (err < 0)
- break;
- }
-
- /* Update BM driver with number of buffers added to pool */
- bm_pool->buf_num += i;
-
- dev_dbg(&priv->pdev->dev,
- "%s pool %d: pkt_size=%4d, buf_size=%4d, frag_size=%4d\n",
- bm_pool->type == MVNETA_BM_SHORT ? "short" : "long",
- bm_pool->id, bm_pool->pkt_size, bm_pool->buf_size,
- bm_pool->frag_size);
-
- dev_dbg(&priv->pdev->dev,
- "%s pool %d: %d of %d buffers added\n",
- bm_pool->type == MVNETA_BM_SHORT ? "short" : "long",
- bm_pool->id, i, buf_num);
-
- return i;
-}
-EXPORT_SYMBOL_GPL(mvneta_bm_bufs_add);
+EXPORT_SYMBOL_GPL(mvneta_bm_construct);
/* Create pool */
static int mvneta_bm_pool_create(struct mvneta_bm *priv,
@@ -183,8 +118,7 @@ static int mvneta_bm_pool_create(struct
struct platform_device *pdev = priv->pdev;
u8 target_id, attr;
int size_bytes, err;
-
- size_bytes = sizeof(u32) * bm_pool->size;
+ size_bytes = sizeof(u32) * bm_pool->hwbm_pool.size;
bm_pool->virt_addr = dma_alloc_coherent(&pdev->dev, size_bytes,
&bm_pool->phys_addr,
GFP_KERNEL);
@@ -245,11 +179,16 @@ struct mvneta_bm_pool *mvneta_bm_pool_us
/* Allocate buffers in case BM pool hasn't been used yet */
if (new_pool->type == MVNETA_BM_FREE) {
+ struct hwbm_pool *hwbm_pool = &new_pool->hwbm_pool;
+
+ new_pool->priv = priv;
new_pool->type = type;
new_pool->buf_size = MVNETA_RX_BUF_SIZE(new_pool->pkt_size);
- new_pool->frag_size =
+ hwbm_pool->frag_size =
SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(new_pool->pkt_size)) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ hwbm_pool->construct = mvneta_bm_construct;
+ hwbm_pool->priv = new_pool;
/* Create new pool */
err = mvneta_bm_pool_create(priv, new_pool);
@@ -260,10 +199,10 @@ struct mvneta_bm_pool *mvneta_bm_pool_us
}
/* Allocate buffers for this pool */
- num = mvneta_bm_bufs_add(priv, new_pool, new_pool->size);
- if (num != new_pool->size) {
+ num = hwbm_pool_add(hwbm_pool, hwbm_pool->size, GFP_ATOMIC);
+ if (num != hwbm_pool->size) {
WARN(1, "pool %d: %d of %d allocated\n",
- new_pool->id, num, new_pool->size);
+ new_pool->id, num, hwbm_pool->size);
return NULL;
}
}
@@ -284,7 +223,7 @@ void mvneta_bm_bufs_free(struct mvneta_b
mvneta_bm_config_set(priv, MVNETA_BM_EMPTY_LIMIT_MASK);
- for (i = 0; i < bm_pool->buf_num; i++) {
+ for (i = 0; i < bm_pool->hwbm_pool.buf_num; i++) {
dma_addr_t buf_phys_addr;
u32 *vaddr;
@@ -303,13 +242,13 @@ void mvneta_bm_bufs_free(struct mvneta_b
dma_unmap_single(&priv->pdev->dev, buf_phys_addr,
bm_pool->buf_size, DMA_FROM_DEVICE);
- mvneta_frag_free(bm_pool->frag_size, vaddr);
+ hwbm_buf_free(&bm_pool->hwbm_pool, vaddr);
}
mvneta_bm_config_clear(priv, MVNETA_BM_EMPTY_LIMIT_MASK);
/* Update BM driver with number of buffers removed from pool */
- bm_pool->buf_num -= i;
+ bm_pool->hwbm_pool.buf_num -= i;
}
EXPORT_SYMBOL_GPL(mvneta_bm_bufs_free);
@@ -317,6 +256,7 @@ EXPORT_SYMBOL_GPL(mvneta_bm_bufs_free);
void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool, u8 port_map)
{
+ struct hwbm_pool *hwbm_pool = &bm_pool->hwbm_pool;
bm_pool->port_map &= ~port_map;
if (bm_pool->port_map)
return;
@@ -324,11 +264,12 @@ void mvneta_bm_pool_destroy(struct mvnet
bm_pool->type = MVNETA_BM_FREE;
mvneta_bm_bufs_free(priv, bm_pool, port_map);
- if (bm_pool->buf_num)
+ if (hwbm_pool->buf_num)
WARN(1, "cannot free all buffers in pool %d\n", bm_pool->id);
if (bm_pool->virt_addr) {
- dma_free_coherent(&priv->pdev->dev, sizeof(u32) * bm_pool->size,
+ dma_free_coherent(&priv->pdev->dev,
+ sizeof(u32) * hwbm_pool->size,
bm_pool->virt_addr, bm_pool->phys_addr);
bm_pool->virt_addr = NULL;
}
@@ -381,10 +322,10 @@ static void mvneta_bm_pools_init(struct
MVNETA_BM_POOL_CAP_ALIGN));
size = ALIGN(size, MVNETA_BM_POOL_CAP_ALIGN);
}
- bm_pool->size = size;
+ bm_pool->hwbm_pool.size = size;
mvneta_bm_write(priv, MVNETA_BM_POOL_SIZE_REG(i),
- bm_pool->size);
+ bm_pool->hwbm_pool.size);
/* Obtain custom pkt_size from DT */
sprintf(prop, "pool%d,pkt-size", i);
--- a/drivers/net/ethernet/marvell/mvneta_bm.h
+++ b/drivers/net/ethernet/marvell/mvneta_bm.h
@@ -108,20 +108,15 @@ struct mvneta_bm {
};
struct mvneta_bm_pool {
+ struct hwbm_pool hwbm_pool;
/* Pool number in the range 0-3 */
u8 id;
enum mvneta_bm_type type;
- /* Buffer Pointers Pool External (BPPE) size in number of bytes */
- int size;
- /* Number of buffers used by this pool */
- int buf_num;
- /* Pool buffer size */
- int buf_size;
/* Packet size */
int pkt_size;
- /* Single frag size */
- u32 frag_size;
+ /* Size of the buffer acces through DMA*/
+ u32 buf_size;
/* BPPE virtual base address */
u32 *virt_addr;
@@ -143,8 +138,7 @@ void mvneta_bm_pool_destroy(struct mvnet
struct mvneta_bm_pool *bm_pool, u8 port_map);
void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
u8 port_map);
-int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- int buf_num);
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf);
int mvneta_bm_pool_refill(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool);
struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
@@ -170,8 +164,7 @@ void mvneta_bm_pool_destroy(struct mvnet
struct mvneta_bm_pool *bm_pool, u8 port_map) {}
void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
u8 port_map) {}
-int mvneta_bm_bufs_add(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
- int buf_num) { return 0; }
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf) { return 0; }
int mvneta_bm_pool_refill(struct mvneta_bm *priv,
struct mvneta_bm_pool *bm_pool) {return 0; }
struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,

52
target/linux/mvebu/patches-4.4/047-net-mvneta-Fix-spinlock-usage.patch Normal file
View File

@@ -0,0 +1,52 @@
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Sat, 12 Mar 2016 18:44:17 +0100
Subject: [PATCH] net: mvneta: Fix spinlock usage
In the previous patch, the spinlock was not initialized. While it didn't
cause any trouble yet it could be a problem to use it uninitialized.
The most annoying part was the critical section protected by the spinlock
in mvneta_stop(). Some of the functions could sleep as pointed when
activated CONFIG_DEBUG_ATOMIC_SLEEP. Actually, in mvneta_stop() we only
need to protect the is_stopped flagged, indeed the code of the notifier
for CPU online is protected by the same spinlock, so when we get the
lock, the notifer work is done.
Reported-by: Patrick Uiterwijk <patrick@puiterwijk.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3484,17 +3484,17 @@ static int mvneta_stop(struct net_device
struct mvneta_port *pp = netdev_priv(dev);
/* Inform that we are stopping so we don't want to setup the
- * driver for new CPUs in the notifiers
+ * driver for new CPUs in the notifiers. The code of the
+ * notifier for CPU online is protected by the same spinlock,
+ * so when we get the lock, the notifer work is done.
*/
spin_lock(&pp->lock);
pp->is_stopped = true;
+ spin_unlock(&pp->lock);
+
mvneta_stop_dev(pp);
mvneta_mdio_remove(pp);
unregister_cpu_notifier(&pp->cpu_notifier);
- /* Now that the notifier are unregistered, we can release le
- * lock
- */
- spin_unlock(&pp->lock);
on_each_cpu(mvneta_percpu_disable, pp, true);
free_percpu_irq(dev->irq, pp->ports);
mvneta_cleanup_rxqs(pp);
@@ -4027,6 +4027,7 @@ static int mvneta_probe(struct platform_
dev->ethtool_ops = &mvneta_eth_tool_ops;
pp = netdev_priv(dev);
+ spin_lock_init(&pp->lock);
pp->phy_node = phy_node;
pp->phy_interface = phy_mode;

33
target/linux/mvebu/patches-4.4/048-net-mvneta-fix-error-messages-in-mvneta_port_down-fu.patch Normal file
View File

@@ -0,0 +1,33 @@
From: Dmitri Epshtein <dima@marvell.com>
Date: Sat, 12 Mar 2016 18:44:19 +0100
Subject: [PATCH] net: mvneta: fix error messages in mvneta_port_down function
This commit corrects error printing when shutting down the port.
[gregory.clement@free-electrons.com: split initial commit in two
individual changes]
Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1105,7 +1105,7 @@ static void mvneta_port_down(struct mvne
do {
if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
netdev_warn(pp->dev,
- "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
+ "TIMEOUT for RX stopped ! rx_queue_cmd: 0x%08x\n",
val);
break;
}
@@ -1144,7 +1144,7 @@ static void mvneta_port_down(struct mvne
do {
if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
netdev_warn(pp->dev,
- "TX FIFO empty timeout status=0x08%x\n",
+ "TX FIFO empty timeout status=0x%08x\n",
val);
break;
}

56
target/linux/mvebu/patches-4.4/049-net-mvneta-replace-MVNETA_CPU_D_CACHE_LINE_SIZE-with.patch Normal file
View File

@@ -0,0 +1,56 @@
From: Jisheng Zhang <jszhang@marvell.com>
Date: Wed, 30 Mar 2016 19:55:21 +0800
Subject: [PATCH] net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with
L1_CACHE_BYTES
The mvneta is also used in some Marvell berlin family SoCs which may
have 64bytes cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE
usage with L1_CACHE_BYTES.
And since dma_alloc_coherent() is always cacheline size aligned, so
remove the align checks.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -260,7 +260,6 @@
#define MVNETA_VLAN_TAG_LEN 4
-#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
#define MVNETA_TX_CSUM_DEF_SIZE 1600
#define MVNETA_TX_CSUM_MAX_SIZE 9800
#define MVNETA_ACC_MODE_EXT1 1
@@ -300,7 +299,7 @@
#define MVNETA_RX_PKT_SIZE(mtu) \
ALIGN((mtu) + MVNETA_MH_SIZE + MVNETA_VLAN_TAG_LEN + \
ETH_HLEN + ETH_FCS_LEN, \
- MVNETA_CPU_D_CACHE_LINE_SIZE)
+ L1_CACHE_BYTES)
#define IS_TSO_HEADER(txq, addr) \
((addr >= txq->tso_hdrs_phys) && \
@@ -2762,9 +2761,6 @@ static int mvneta_rxq_init(struct mvneta
if (rxq->descs == NULL)
return -ENOMEM;
- BUG_ON(rxq->descs !=
- PTR_ALIGN(rxq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE));
-
rxq->last_desc = rxq->size - 1;
/* Set Rx descriptors queue starting address */
@@ -2835,10 +2831,6 @@ static int mvneta_txq_init(struct mvneta
if (txq->descs == NULL)
return -ENOMEM;
- /* Make sure descriptor address is cache line size aligned */
- BUG_ON(txq->descs !=
- PTR_ALIGN(txq->descs, MVNETA_CPU_D_CACHE_LINE_SIZE));
-
txq->last_desc = txq->size - 1;
/* Set maximum bandwidth for enabled TXQs */

75
target/linux/mvebu/patches-4.4/050-net-mvneta-fix-changing-MTU-when-using-per-cpu-proce.patch Normal file
View File

@@ -0,0 +1,75 @@
From: Marcin Wojtas <mw@semihalf.com>
Date: Fri, 1 Apr 2016 15:21:18 +0200
Subject: [PATCH] net: mvneta: fix changing MTU when using per-cpu processing
After enabling per-cpu processing it appeared that under heavy load
changing MTU can result in blocking all port's interrupts and
transmitting data is not possible after the change.
This commit fixes above issue by disabling percpu interrupts for the
time, when TXQs and RXQs are reconfigured.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3040,6 +3040,20 @@ static int mvneta_check_mtu_valid(struct
return mtu;
}
+static void mvneta_percpu_enable(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE);
+}
+
+static void mvneta_percpu_disable(void *arg)
+{
+ struct mvneta_port *pp = arg;
+
+ disable_percpu_irq(pp->dev->irq);
+}
+
/* Change the device mtu */
static int mvneta_change_mtu(struct net_device *dev, int mtu)
{
@@ -3064,6 +3078,7 @@ static int mvneta_change_mtu(struct net_
* reallocation of the queues
*/
mvneta_stop_dev(pp);
+ on_each_cpu(mvneta_percpu_disable, pp, true);
mvneta_cleanup_txqs(pp);
mvneta_cleanup_rxqs(pp);
@@ -3087,6 +3102,7 @@ static int mvneta_change_mtu(struct net_
return ret;
}
+ on_each_cpu(mvneta_percpu_enable, pp, true);
mvneta_start_dev(pp);
mvneta_port_up(pp);
@@ -3240,20 +3256,6 @@ static void mvneta_mdio_remove(struct mv
pp->phy_dev = NULL;
}
-static void mvneta_percpu_enable(void *arg)
-{
- struct mvneta_port *pp = arg;
-
- enable_percpu_irq(pp->dev->irq, IRQ_TYPE_NONE);
-}
-
-static void mvneta_percpu_disable(void *arg)
-{
- struct mvneta_port *pp = arg;
-
- disable_percpu_irq(pp->dev->irq);
-}
-
/* Electing a CPU must be done in an atomic way: it should be done
* after or before the removal/insertion of a CPU and this function is
* not reentrant.

53
target/linux/mvebu/patches-4.4/051-ARM-dts-armada-38x-add-buffer-manager-nodes.patch Normal file
View File

@@ -0,0 +1,53 @@
From: Marcin Wojtas <mw@semihalf.com>
Date: Mon, 14 Mar 2016 09:38:57 +0100
Subject: [PATCH] ARM: dts: armada-38x: add buffer manager nodes
Armada 38x network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-38x.dtsi - for the actual common BM unit (bm@c8000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.
Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -540,6 +540,14 @@
status = "disabled";
};
+ bm: bm@c8000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc8000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@@ -618,6 +626,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
};
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ no-memory-wc;
+ status = "disabled";
+ };
};
clocks {

53
target/linux/mvebu/patches-4.4/052-ARM-dts-armada-xp-add-buffer-manager-nodes.patch Normal file
View File

@@ -0,0 +1,53 @@
From: Marcin Wojtas <mw@semihalf.com>
Date: Mon, 14 Mar 2016 09:38:59 +0100
Subject: [PATCH] ARM: dts: armada-xp: add buffer manager nodes
Armada XP network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-xp.dtsi - for the actual common BM unit (bm@c0000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.
Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -253,6 +253,14 @@
marvell,crypto-sram-size = <0x800>;
};
+ bm: bm@c0000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc0000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
@@ -291,6 +299,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ no-memory-wc;
+ status = "disabled";
+ };
};
clocks {

107
target/linux/mvebu/patches-4.4/106-enable-bm-on-linksys-devices.patch Normal file
View File

@@ -0,0 +1,107 @@
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -59,7 +59,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
@@ -93,6 +94,9 @@
ethernet@70000 {
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -102,6 +106,9 @@
ethernet@34000 {
status = "okay";
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -112,6 +119,10 @@
status = "okay";
};
+ bm@c8000 {
+ status = "okay";
+ };
+
sata@a8000 {
status = "okay";
};
@@ -198,6 +209,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -71,7 +71,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
pcie-controller {
status = "okay";
@@ -205,6 +206,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -216,12 +220,19 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
+ bm@c0000 {
+ status = "okay";
+ };
+
/* USB part of the eSATA/USB 2.0 port */
usb@50000 {
status = "okay";
@@ -379,6 +390,10 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
gpio_keys {

2
target/linux/mvebu/patches-4.4/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch
View File

@@ -9,7 +9,7 @@ Signed-off-by: Andrew Lunn <andrew@lunn.ch>
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -414,13 +414,11 @@
@@ -428,13 +428,11 @@
};
};