domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: add support for TP-Link CPE610-v1

Browse Source 
TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - Based on the same underlying hardware as the TP-Link CPE510
 - Power, LAN, WLAN5G green LEDs
 - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
This commit is contained in:
Andrew Cameron
2019-01-14 20:14:54 -06:00
committed by Christian Lamparter
parent 8a5a01a677
commit e15049c88b
5 changed files with 194 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/base-files/etc/board.d/01_leds
View File

@@ -155,6 +155,9 @@ tplink,cpe210-v3)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
;;
tplink,cpe610-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,re450-v2)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"

1
target/linux/ath79/base-files/etc/board.d/02_network
View File

@@ -25,6 +25,7 @@ ath79_setup_interfaces()
pqi,air-pen|\
tplink,cpe210-v2|\
tplink,cpe210-v3|\
tplink,cpe610-v1|\
tplink,re350k-v1|\
tplink,re450-v2|\
tplink,tl-mr10u|\