domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath79: add support for Ubiquiti PowerBeam 5AC Gen2

Browse Source 
The Ubiquiti PowerBeam 5AC Gen 2 (PBE-5AC-Gen2) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna. The device is
hardware-compatible with the LiteBeam AC Gen2, plus the 4 extra LEDs.

Specifications:
 - SoC: Qualcomm Atheros AR9342 rev 2
 - RAM: 64 MB DDR2
 - Flash: 16 MB SPI NOR (mx25l12805d)
 - Ethernet: 1x 10/100/1000 Mbps Atheros 8035, 24 Vdc PoE-in
 - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
 - WiFi 2.4 GHz: Atheros AR9340 (SoC-based)
 - Buttons: 1x (reset)
 - LEDs: 1x power, 1x Ethernet, 4x RSSI via GPIO. All blue.
 - UART: not tested

Installation from stock airOS firmware:
 - Follow instructions for WA-type Ubiquiti devices on OpenWrt wiki

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[changed device name in commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Roger Pueyo Centelles
2020-03-12 11:37:10 +01:00
committed by Adrian Schmutzler
parent f0435d5343
commit e210fe91b1
5 changed files with 80 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -282,7 +282,8 @@ ubnt,rocket-m)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100"
;;
ubnt,nanobeam-ac|\
ubnt,nanostation-ac)
ubnt,nanostation-ac|\
ubnt,powerbeam-5ac-gen2)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:blue:rssi0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:blue:rssi1" "wlan0" "26" "100"

4
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -53,6 +53,7 @@ ath79_setup_interfaces()
ubnt,nanostation-loco-m|\
ubnt,nanostation-loco-m-xw|\
ubnt,picostation-m|\
ubnt,powerbeam-5ac-gen2|\
ubnt,rocket-m|\
ubnt,unifiac-lite|\
ubnt,unifiac-lr|\
@@ -468,7 +469,8 @@ ath79_setup_macs()
ubnt,unifi)
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
;;
ubnt,litebeam-ac-gen2)
ubnt,litebeam-ac-gen2|\
ubnt,powerbeam-5ac-gen2)
label_mac=$(mtd_get_mac_binary art 0x5006)
;;
ubnt,routerstation|\

1
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -25,6 +25,7 @@ case "$FIRMWARE" in
ubnt,nanobeam-ac|\
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
ubnt,powerbeam-5ac-gen2|\
ubnt,unifiac-pro|\
yuncore,a770)
caldata_extract "art" 0x5000 0x844