domenico/openwrt_NSS_ACW
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

remove whitespaces in kmod-switch sources

Browse Source 
SVN-Revision: 22320
This commit is contained in:
Florian Fainelli
2010-07-20 22:25:04 +00:00
parent 5149ed151d
commit e31542241c
3 changed files with 56 additions and 56 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
package/switch/src/switch-adm.c
View File

@@ -2,7 +2,7 @@
* ADMTEK Adm6996 switch configuration module
*
* Copyright (C) 2005 Felix Fietkau <nbd@nbd.name>
*
*
* Partially based on Broadcom Home Networking Division 10/100 Mbit/s
* Ethernet Device Driver (from Montavista 2.4.20_mvl31 Kernel).
* Copyright (C) 2004 Broadcom Corporation
@@ -22,7 +22,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
@@ -182,10 +182,10 @@ static void adm_read(int cs, char *buf, unsigned int bits)
/* Enable outputs with specified value to the chip */
static void adm_enout(__u8 pins, __u8 val)
{
{
/* Prepare GPIO output value */
gpio_out(pins, val);
/* Enable GPIO outputs */
gpio_outen(pins, pins);
udelay(EECK_EDGE_TIME);
@@ -194,7 +194,7 @@ static void adm_enout(__u8 pins, __u8 val)
/* Disable outputs to the chip */
static void adm_disout(__u8 pins)
{
{
/* Disable GPIO outputs */
gpio_outen(pins, 0);
udelay(EECK_EDGE_TIME);
@@ -285,17 +285,17 @@ static int vlan_ports[] = { 1 << 0, 1 << 2, 1 << 4, 1 << 6, 1 << 7, 1 << 8 };
static int handle_vlan_port_read(void *driver, char *buf, int nr)
{
int ports, i, c, len = 0;
if ((nr < 0) || (nr > 15))
return 0;
/* Get VLAN port map */
ports = adm_rreg(0, 0x13 + nr);
for (i = 0; i <= 5; i++) {
if (ports & vlan_ports[i]) {
c = adm_rreg(0, port_conf[i]);
len += sprintf(buf + len, "%d", i);
if (c & (1 << 4)) {
buf[len++] = 't';
@@ -327,17 +327,17 @@ static int handle_vlan_port_write(void *driver, char *buf, int nr)
ports |= vlan_ports[i];
cfg = adm_rreg(0, port_conf[i]);
/* Tagging */
if (c->untag & (1 << i))
cfg &= ~(1 << 4);
else
cfg |= (1 << 4);
if ((c->untag | c->pvid) & (1 << i)) {
cfg = (cfg & ~(0xf << 10)) | (nr << 10);
}
adm_wreg(port_conf[i], (__u16) cfg);
} else {
ports &= ~(vlan_ports[i]);
@@ -356,7 +356,7 @@ static int handle_port_enable_read(void *driver, char *buf, int nr)
static int handle_port_enable_write(void *driver, char *buf, int nr)
{
int reg = adm_rreg(0, port_conf[nr]);
if (buf[0] == '0')
reg |= (1 << 5);
else if (buf[0] == '1')
@@ -391,7 +391,7 @@ static int handle_port_media_write(void *driver, char *buf, int nr)
if (media < 0)
return -1;
reg &= ~((1 << 1) | (1 << 2) | (1 << 3));
if (media & SWITCH_MEDIA_AUTO)
reg |= 1 << 1;
@@ -401,7 +401,7 @@ static int handle_port_media_write(void *driver, char *buf, int nr)
reg |= 1 << 3;
adm_wreg(port_conf[nr], reg);
return 0;
}
@@ -413,7 +413,7 @@ static int handle_vlan_enable_read(void *driver, char *buf, int nr)
static int handle_vlan_enable_write(void *driver, char *buf, int nr)
{
int reg = adm_rreg(0, 0x11);
if (buf[0] == '1')
reg |= (1 << 5);
else if (buf[0] == '0')
@@ -453,7 +453,7 @@ static int handle_reset(void *driver, char *buf, int nr)
udelay(1000);
/* Leave RC high and disable GPIO outputs */
adm_disout((__u8)(eecs | eesk | eedi));
}
/* set up initial configuration for cpu port */
@@ -462,7 +462,7 @@ static int handle_reset(void *driver, char *buf, int nr)
(1 << 4) | /* Tagging */
0xf); /* full duplex, 100Mbps, auto neg, flow ctrl */
adm_wreg(port_conf[5], cfg);
/* vlan mode select register (0x11): vlan on, mac clone */
adm_wreg(0x11, 0xff30);
@@ -472,7 +472,7 @@ static int handle_reset(void *driver, char *buf, int nr)
static int handle_registers(void *driver, char *buf, int nr)
{
int i, len = 0;
for (i = 0; i <= 0x33; i++) {
len += sprintf(buf + len, "0x%02x: 0x%04x\n", i, adm_rreg(0, i));
}