brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-08 20:33:30 +01:00
parent 8fe5ad5d33
commit e7bfda2c24
505 changed files with 13 additions and 13 deletions
--- a/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
+++ b/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Comtrend AR-5315u";
+	compatible = "comtrend,ar-5315u", "brcm,bcm6318";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 3 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 33 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps_green {
+			label = "AR-5315u:green:wps";
+			gpios = <&pinctrl 0 1>;
+		};
+		power_green {
+			label = "AR-5315u:green:power";
+			gpios = <&pinctrl 1 1>;
+			default-state = "on";
+		};
+		usb_green {
+			label = "AR-5315u:green:usb";
+			gpios = <&pinctrl 2 1>;
+		};
+		inet_green {
+			label = "AR-5315u:green:inet";
+			gpios = <&pinctrl 8 1>;
+		};
+		inet_red {
+			label = "AR-5315u:red:inet";
+			gpios = <&pinctrl 9 1>;
+		};
+		dsl_green {
+			label = "AR-5315u:green:dsl";
+			gpios = <&pinctrl 10 1>;
+		};
+		power_red {
+			label = "AR-5315u:red:power";
+			gpios = <&pinctrl 11 1>;
+		};
+	};
+};
+
+&hsspi {
+	status = "ok";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <62500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			linux@10000 {
+				reg = <0x010000 0xfe0000>;
+				label = "linux";
+				compatible = "brcm,bcm963xx-imagetag";
+			};
+
+			nvram@ff0000 {
+				reg = <0xff0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+};
+
+&uart0 {
+	status = "ok";
+};