brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts

@@ -0,0 +1,133 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DSL-2750B/DSL-2751 rev D1";
+	compatible = "d-link,dsl-275xb-d1", "brcm,bcm6318";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wifi {
+			label = "wifi";
+			gpios = <&pinctrl 2 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 33 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 34 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_green {
+			label = "dsl-275xb:green:power";
+			gpios = <&pinctrl 3 1>;
+			default-state = "on";
+		};
+
+		inet_green {
+			label = "dsl-275xb:green:inet";
+			gpios = <&pinctrl 8 1>;
+		};
+
+		inet_red {
+			label = "dsl-275xb:red:inet-fail";
+			gpios = <&pinctrl 9 1>;
+		};
+
+		power_red {
+			label = "dsl-275xb:red:post-failed";
+			gpios = <&pinctrl 11 1>;
+		};
+
+		wps_blue {
+			label = "dsl-275xb:blue:wps";
+			gpios = <&pinctrl 16 1>;
+		};
+
+		dsl_green {
+			label = "dsl-275xb:green:dsl";
+			gpios = <&pinctrl 17 1>;
+		};
+
+		usb_green {
+			/* not user controllable? */
+			label = "dsl-275xb:green:usb";
+			gpios = <&pinctrl 49 1>;
+		};
+	};
+};
+
+&hsspi {
+	status = "ok";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <62500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			linux@10000 {
+				reg = <0x010000 0x7e0000>;
+				label = "linux";
+				compatible = "brcm,bcm963xx-imagetag";
+			};
+
+			nvram@7f0000 {
+				reg = <0x7f0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+		     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+};
+
+&uart0 {
+	status = "ok";
+};