brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/bcm63xx/dts/bcm6318.dtsi

@@ -0,0 +1,200 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6318";
+
+	aliases {
+		pinctrl = &pinctrl;
+		serial0 = &uart0;
+		spi1 = &hsspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,bmips3300", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	ubus@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&periph_intc>;
+
+		ext_intc: interrupt-controller@10000018 {
+			compatible = "brcm,bcm6318-ext-intc";
+			reg = <0x10000018 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupts = <24>, <25>, <26>, <27>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		pinctrl: pin-controller@10000080 {
+			compatible = "brcm,bcm6318-pinctrl";
+			reg = <0x10000080 0x08>,
+			      <0x10000088 0x08>,
+			      <0x10000098 0x04>,
+			      <0x1000009c 0x0c>,
+			      <0x100000d4 0x18>;
+			reg-names = "dirout", "dat", "mode", "mux", "pad";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-parent = <&ext_intc>;
+			interrupts = <0 0>, <1 0>;
+			interrupt-names = "gpio33", "gpio34";
+
+			pinctrl_ephy0_spd_led: ephy0_spd_led {
+				function = "ephy0_spd_led";
+				pins = "gpio0";
+			};
+
+			pinctrl_ephy1_spd_led: ephy1_spd_led {
+				function = "ephy1_spd_led";
+				pins = "gpio1";
+			};
+
+			pinctrl_ephy2_spd_led: ephy2_spd_led {
+				function = "ephy2_spd_led";
+				pins = "gpio2";
+			};
+
+			pinctrl_ephy3_spd_led: ephy3_spd_led {
+				function = "ephy3_spd_led";
+				pins = "gpio3";
+			};
+
+			pinctrl_ephy0_act_led: ephy0_act_led {
+				function = "ephy0_act_led";
+				pins = "gpio4";
+			};
+
+			pinctrl_ephy1_act_led: ephy1_act_led {
+				function = "ephy1_act_led";
+				pins = "gpio5";
+			};
+
+			pinctrl_ephy2_act_led: ephy2_act_led {
+				function = "ephy2_act_led";
+				pins = "gpio6";
+			};
+
+			pinctrl_ephy3_act_led: ephy3_act_led {
+				function = "ephy3_act_led";
+				pins = "gpio7";
+			};
+
+			pinctrl_serial_led: serial_led {
+				pinctrl_serial_led_data: serial_led_data {
+					function = "serial_led_data";
+					pins = "gpio6";
+				};
+
+				pinctrl_serial_led_clk: serial_led_clk {
+					function = "serial_led_clk";
+					pins = "gpio7";
+				};
+			};
+
+			pinctrl_inet_act_led: inet_act_led {
+				function = "inet_act_led";
+				pins = "gpio8";
+			};
+
+			pinctrl_inet_fail_led: inet_fail_led {
+				function = "inet_fail_led";
+				pins = "gpio9";
+			};
+
+			pinctrl_dsl_led: dsl_led {
+				function = "dsl_led";
+				pins = "gpio10";
+			};
+
+			pinctrl_post_fail_led: post_fail_led {
+				function = "post_fail_led";
+				pins = "gpio11";
+			};
+
+			pinctrl_wlan_wps_led: wlan_wps_led {
+				function = "wlan_wps_led";
+				pins = "gpio12";
+			};
+
+			pinctrl_usb_pwron: usb_pwron {
+				function = "usb_pwron";
+				pins = "gpio13";
+			};
+
+			pinctrl_usb_device_led: usb_device_led {
+				function = "usb_device_led";
+				pins = "gpio13";
+			};
+
+			pinctrl_usb_active: usb_active {
+				function = "usb_active";
+				pins = "gpio40";
+			};
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <28>;
+
+			/* clocks = <&periph_clk>; */
+			/* clock-names = "refclk"; */
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10000200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000200 0x24>;
+			status = "disabled";
+		};
+
+		hsspi: spi@10003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-hsspi";
+			reg = <0x10003000 0x600>;
+			interrupts = <29>;
+			/* clocks = <&clkctl 25>; */
+		};
+	};
+};