brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts

@@ -0,0 +1,171 @@
+/dts-v1/;
+
+#include "bcm6358.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "BT Home Hub 2.0 Type A";
+	compatible = "bt,home-hub-2-a", "brcm,bcm6358";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		phone {
+			label = "phone";
+			gpios = <&pinctrl 1 1>;
+			linux,code = <KEY_PHONE>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 9 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 11 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&leds {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_serial_led>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "HOMEHUB2A:red:power";
+	};
+
+	led@1 {
+		reg = <0>;
+		active-low;
+		label = "HOMEHUB2A:green:power";
+		default-state = "on";
+	};
+
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "HOMEHUB2A:blue:power";
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "HOMEHUB2A:red:broadband";
+	};
+
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "HOMEHUB2A:green:broadband";
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		label = "HOMEHUB2A:blue:broadband";
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		label = "HOMEHUB2A:red:wireless";
+	};
+
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "HOMEHUB2A:green:wireless";
+	};
+
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "HOMEHUB2A:blue:wireless";
+	};
+
+	led@9 {
+		reg = <9>;
+		active-low;
+		label = "HOMEHUB2A:red:phone";
+	};
+
+	led@10 {
+		reg = <10>;
+		active-low;
+		label = "HOMEHUB2A:green:phone";
+	};
+
+	led@11 {
+		reg = <11>;
+		active-low;
+		label = "HOMEHUB2A:blue:phone";
+	};
+
+	led@12 {
+		reg = <12>;
+		active-low;
+		label = "HOMEHUB2A:red:upgrading";
+	};
+
+	led@13 {
+		reg = <13>;
+		active-low;
+		label = "HOMEHUB2A:green:upgrading";
+	};
+
+	led@14 {
+		reg = <14>;
+		active-low;
+		label = "HOMEHUB2A:blue:upgrading";
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			label = "CFE";
+			reg = <0x000000 0x020000>;
+		};
+
+		linux@20000 {
+			label = "linux";
+			reg = <0x020000 0xfc0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		nvram@fe0000 {
+			label = "nvram";
+			reg = <0xfe0000 0x020000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};