brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts

@@ -0,0 +1,108 @@
+/dts-v1/;
+
+#include "bcm6362.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sagem F@st 2504N";
+	compatible = "sagem,fast-2504n", "brcm,bcm6362";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 24 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 25 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_orange {
+			label = "fast2504n:orange:power";
+			gpios = <&pinctrl 2 1>;
+		};
+		power_green {
+			label = "fast2504n:green:power";
+			gpios = <&pinctrl 10 1>;
+			default-state = "on";
+		};
+		inet_red {
+			label = "fast2504n:red:internet";
+			gpios = <&pinctrl 26 1>;
+		};
+		ok_green {
+			label = "fast2504n:green:ok";
+			gpios = <&pinctrl 28 1>;
+		};
+		ok_orange {
+			label = "fast2504n:orange:ok";
+			gpios = <&pinctrl 29 1>;
+		};
+		wlan_orangee {
+			label = "fast2504n:orange:wlan";
+			gpios = <&pinctrl 30 1>;
+		};
+	};
+};
+
+&hsspi {
+	status = "ok";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cfe@0 {
+				reg = <0x000000 0x010000>;
+				label = "cfe";
+				read-only;
+			};
+
+			linux@10000 {
+				reg = <0x010000 0x7e0000>;
+				label = "linux";
+				compatible = "brcm,bcm963xx-imagetag";
+			};
+
+			nvram@7f0000 {
+				reg = <0x7f0000 0x010000>;
+				label = "nvram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};