brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch

@@ -0,0 +1,52 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -225,6 +225,33 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_CPVA502plus = {
++	.name				= "CPVA502+",
++	.expected_cpu_id		= 0x6348,
++
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++	.use_fallback_sprom		= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++	},
++
++	.ephy_reset_gpio		= 4,
++	.ephy_reset_gpio_flags		= GPIO_ACTIVE_LOW,
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM4318,
++		.pci_bus			= 0,
++		.pci_dev			= 1,
++	},
++};
+ 
+ static struct board_info __initdata board_ct536_ct5621 = {
+ 	.name				= "CT536_CT5621",
+@@ -801,6 +828,7 @@ static const struct board_info __initcon
+ 	&board_V2110,
+ 	&board_ct536_ct5621,
+ 	&board_96348A_122,
++	&board_CPVA502plus,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, },
+ 	{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
+ 	{ .compatible = "tecom,gw6200", .data = &board_gw6200, },
++	{ .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, },
+ 	{ .compatible = "telsey,magic", .data = &board_96348sv, },
+ 	{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
+ 	{ .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, },